FreeBSD Manual Pages
NVIM(1) General Commands Manual NVIM(1) NAME nvim -- edit text SYNOPSIS nvim [options] [file ...] nvim [options] - nvim [options] -t tag nvim [options] -q [errorfile] DESCRIPTION nvim is a text editor based on Vim. Start nvim followed by any number of options and/or files: nvim [options] [file ...] Commands in nvim begin with colon (`:'). Type ":help subject" to get help on a specific subject. Use <Tab> and CTRL-D to complete subjects (":help cmdline-completion"). The "quickref" help section is a condensed reference of editor features: :help quickref If you are new to Vim/Nvim, start with the 30-minute tutorial: :Tutor After installing/updating Nvim, it's a good idea to run the self-check: :checkhealth file ... File(s) to edit. Opens one buffer per file. To switch between buffers, use the :next and :previous commands. - Reads text from standard input until EOF, then opens a buffer with that text. User input is read from standard error, which should be a terminal. OPTIONS -t tag Finds tag in the tags file, the associated file becomes the current file and the associated command is executed. Cursor is positioned at the tag location in the file. :help tag-commands -q [errorfile] QuickFix mode. Display the first error in errorfile. If errorfile is omitted, the value of the 'errorfile' option is used (defaults to errors.err). Further errors can be jumped to with the :cnext command. :help quickfix -- End of options. Remaining arguments are treated as literal file names, including filenames starting with hyphen (`-'). -e Ex mode, reading stdin as Ex commands. :help Ex-mode -E Ex mode, reading stdin as text. :help Ex-mode -es Silent (non-interactive) Ex mode, reading stdin as Ex commands. Useful for scripting because it does NOT start a UI, unlike -e. :help silent-mode -Es Silent (non-interactive) Ex mode, reading stdin as text. Use- ful for scripting because it does NOT start a UI, unlike -E. :help silent-mode -d Diff mode. Show the difference between two to eight files, similar to sdiff(1). :help diff -R Read-only mode. Sets the 'readonly' option. Implies -n. Buffers can still be edited, but cannot be written to disk if already associated with a file. To overwrite a file, add an exclamation mark to the relevant Ex command, such as :w!. :help 'readonly' -m Resets the 'write' option, to disable file modifications. Writing to a file is disabled, but buffers can still be modi- fied. -M Resets the 'write' and 'modifiable' options, to disable file and buffer modifications. -b Binary mode. :help edit-binary -A Arabic mode. Sets the 'arabic' option. -H Hebrew mode. Sets the 'hkmap' and 'rightleft' options. -V[N][file] Verbose mode. Prints debug messages. N is the 'verbose' level, defaults to 10. If file is specified, append messages to file instead of printing them. :help 'verbose' -D Vimscript debug mode. Started when executing the first command from a script. :help debug-mode -n Disable the use of swap files. Sets the 'updatecount' option to 0. Can be useful for editing files on a slow medium. -r [file] Recovery mode. If file is omitted then list swap files with recovery information. Otherwise the swap file file is used to recover a crashed session. The swap file has the same name as the file it's associated with, but with `.swp' appended. :help recovery -L [file] Alias for -r. -u vimrc Use vimrc instead of the default ~/.config/nvim/init.vim. If vimrc is NORC, do not load any initialization files (except plugins). If vimrc is NONE, loading plugins is also skipped. :help initialization -i shada Use shada instead of the default ~/.local/state/nvim/shada/main.shada. If shada is NONE, do not read or write a ShaDa file. :help shada --noplugin Skip loading plugins (by setting the 'noloadplugins' option). Implied by -u NONE. --clean Start Nvim with "factory defaults" (only builtin plugins, no user config/plugins, no shada). :help --clean -o[N] Open N windows stacked horizontally. If N is omitted, open one window for each file. If N is less than the number of file ar- guments, allocate windows for the first N files and hide the rest. -O[N] Like -o, but tile windows vertically. -p[N] Like -o, but for tab pages. +[linenum] For the first file, position the cursor on line linenum. If linenum is omitted, position the cursor on the last line of the file. +5 and -c 5 on the command-line are equivalent to :5 in- side nvim. +/[pattern] For the first file, position the cursor on the first occurrence of pattern. If pattern is omitted, the most recent search pat- tern is used (if any). +/foo and -c /foo on the command-line are equivalent to /foo and :/foo inside nvim. :help search- pattern +command, -c command Execute command after reading the first file. Up to 10 in- stances allowed. "+foo" and -c "foo" are equivalent. --cmd command Like -c, but execute command before processing any vimrc. Up to 10 instances of these can be used independently from in- stances of -c. -l script [args] Execute Lua script with optional [args] after processing any preceding Nvim startup arguments. All [args] are treated as script arguments and are passed literally to Lua, that is, -l stops processing of Nvim arguments. :help -l -S [session] Execute session after the first file argument has been read. If session filename ends with .lua it is executed as Lua in- stead of Vimscript. Equivalent to -c "source session". session cannot start with a hyphen (`-'). If session is omit- ted then Session.vim is used, if found. :help session-file -s scriptin Read normal mode commands from scriptin. The same can be done with the command :source! scriptin. If the end of the file is reached before nvim exits, further characters are read from the keyboard. -w scriptout Append all typed characters to scriptout. Can be used for cre- ating a script to be used with -s or :source!. -W scriptout Like -w, but truncate scriptout. --startuptime file During startup, append timing messages to file. Can be used to diagnose slow startup times. --api-info Dump API metadata serialized to msgpack and exit. --embed Use standard input and standard output as a msgpack-rpc chan- nel. :help --embed --headless Do not start a UI. When supplied with --embed this implies that the embedding application does not intend to (immediately) start a UI. Also useful for "scraping" messages in a pipe. :help --headless --listen address Start RPC server on this pipe or TCP socket. -h, --help Print usage information and exit. -v, --version Print version information and exit. ENVIRONMENT NVIM_APPNAME The name of sub-directories used within each XDG user direc- tory. Defaults to nvim. :help $NVIM_APPNAME NVIM_LOG_FILE Low-level log file, usually found at ~/.local/state/nvim/nvim.log. :help $NVIM_LOG_FILE VIM Used to locate user files, such as init.vim. System-dependent. :help $VIM VIMRUNTIME Used to locate runtime files (documentation, syntax highlight- ing, etc.). XDG_CONFIG_HOME Path to the user-local configuration directory, see "FILES". Defaults to ~/.config. :help xdg XDG_STATE_HOME Like XDG_CONFIG_HOME, but used to store data not generally edited by the user, namely swap, backup, and ShaDa files. De- faults to ~/.local/state. :help xdg XDG_DATA_HOME Like XDG_CONFIG_HOME, but used to store data not generally edited by the user, things like runtime files. Defaults to ~/.local/share. :help xdg VIMINIT Ex commands to be executed at startup. :help VIMINIT SHELL Used to initialize the 'shell' option, which decides the de- fault shell used by features like :terminal, :!, and system(). FILES ~/.config/nvim/init.lua User-local nvim Lua configuration file. ~/.config/nvim User-local nvim configuration directory. See also XDG_CONFIG_HOME. $VIM/sysinit.vim System-global nvim configuration file. $VIM System-global nvim runtime directory. AUTHORS Nvim was started by Thiago de Arruda. Most of Vim was written by Bram Moolenaar. Vim is based on Stevie, worked on by Tim Thompson, Tony An- drews, and G.R. (Fred) Walter. :help credits FreeBSD ports 15.quarterly December 17, 2017 NVIM(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | FILES | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=nvim&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>