OCF_HEARTBEAT_FILESY(7) OCF resource agents OCF_HEARTBEAT_FILESY(7) NAME ocf_heartbeat_Filesystem - Manages filesystem mounts SYNOPSIS Filesystem [start | stop | monitor | meta-data | validate-all] DESCRIPTION Resource script for Filesystem. It manages a Filesystem on a shared storage medium. The standard monitor operation of depth 0 (also known as probe) checks if the filesystem is mounted. If you want deeper tests, set OCF_CHECK_LEVEL to one of the following values: 10: read first 16 blocks of the device (raw read) This doesn't exercise the filesystem at all, but the device on which the filesystem lives. This is noop for non-block devices such as NFS, SMBFS, or bind mounts. 20: test if a status file can be written and read The status file must be writable by root. This is not always the case with an NFS mount, as NFS exports usually have the "root_squash" option set. In such a setup, you must either use read-only monitoring (depth=10), export with "no_root_squash" on your NFS server, or grant world write permissions on the directory where the status file is to be placed. SUPPORTED PARAMETERS device The name of block device for the filesystem, or -U, -L options for mount, or NFS mount specification. NOTE: On Linux /dev/disk/by-{uuid,label}/ are preferred to -U/-L. (required, string, no default) directory The mount point for the filesystem. (required, string, no default) fstype The type of filesystem to be mounted. (required, string, no default) options Any extra options to be given as -o options to mount. For bind mounts, add "bind" here and set fstype to "none". We will do the right thing for options such as "bind,ro". (optional, string, no default) statusfile_prefix The prefix to be used for a status file for resource monitoring with depth 20. If you don't specify this parameter, all status files will be created in a separate directory. (optional, string, default ".Filesystem_status/") run_fsck Specify how to decide whether to run fsck or not. "auto" : decide to run fsck depending on the fstype(default) "force" : always run fsck regardless of the fstype "no" : do not run fsck ever. (optional, string, default "auto") fast_stop Normally, we expect no users of the filesystem and the stop operation to finish quickly. If you cannot control the filesystem users easily and want to prevent the stop action from failing, then set this parame- ter to "no" and add an appropriate timeout for the stop operation. This defaults to "no" for GFS2 filesystems. (optional, boolean, default no) force_clones The use of a clone setup for local filesystems is forbidden by default. For special setups like glusterfs, cloning a mount of a local device with a filesystem like ext4 or xfs independently on several nodes is a valid use case. Only set this to "true" if you know what you are doing! (optional, boolean, default false) force_unmount This option allows specifying how to handle processes that are cur- rently accessing the mount directory. "true" : Kill processes accessing mount point "safe" : Kill processes accessing mount point using methods that avoid functions that could po- tentially block during process detection "false" : Do not kill any processes. The 'safe' option uses shell logic to walk the /procs/ directory for pids using the mount point while the default option uses the fuser cli tool. fuser is known to perform operations that can potentially block if unresponsive nfs mounts are in use on the system. (optional, string, default "true") term_signals Signals (names or numbers, whitespace separated) to send processes dur- ing graceful termination phase in stop-action. (optional, string, default "TERM") kill_signals Signals (names or numbers, whitespace separated) to send processes dur- ing forceful killing phase in stop-action. (optional, string, default "KILL") signal_delay How many seconds to wait after sending term/kill signals to processes in stop-action. (optional, string, default "1") SUPPORTED ACTIONS This resource agent supports the following actions (operations): start Starts the resource. Suggested minimum timeout: 60s. stop Stops the resource. Suggested minimum timeout: 60s. monitor Performs a detailed status check. Suggested minimum timeout: 40s. Sug- gested interval: 20s. validate-all Performs a validation of the resource configuration. Suggested minimum timeout: 5s. meta-data Retrieves resource agent metadata (internal use only). Suggested mini- mum timeout: 5s. EXAMPLE CRM SHELL The following is an example configuration for a Filesystem resource using the crm(8) shell: primitive p_Filesystem ocf:heartbeat:Filesystem \ params \ device=string \ directory=string \ fstype=string \ op monitor depth="0" timeout="40s" interval="20s" EXAMPLE PCS The following is an example configuration for a Filesystem resource using pcs(8) pcs resource create p_Filesystem ocf:heartbeat:Filesystem \ device=string \ directory=string \ fstype=string \ op monitor OCF_CHECK_LEVEL="0" timeout="40s" interval="20s" SEE ALSO http://clusterlabs.org/ AUTHOR ClusterLabs contributors (see the resource agent source for information about individual authors) resource-agents 4.13.0 08/27/2026 OCF_HEARTBEAT_FILESY(7)
NAME | SYNOPSIS | DESCRIPTION | SUPPORTED PARAMETERS | SUPPORTED ACTIONS | EXAMPLE CRM SHELL | EXAMPLE PCS | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ocf_heartbeat_Filesystem&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>