FreeBSD Manual Pages
oscam.conf(5) File Formats Manual oscam.conf(5) NAME oscam.conf - main configuration file for OSCam SYNOPSIS The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. sections in os- cam.conf are nonrecurring. The [global] section is required. All other sec- tions are optional. DESCRIPTIONS The [global] section nice = -20..+20 system priority, default:99 pidfile = filename set PID file, default:none logfile = [filename][;syslog][;stdout] logging targets, default:/var/log/oscam.log. You can define a maximum of one filename and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename). PP initial_debuglevel = level set initial debug level for OSCam start, default:0 PP sysloghost = hostname set remote syslog host, default:none syslogport = port set TCP/IP port for remote syslog host, default:none ecmfmt = format define ECM log format, default:c&p/i/s/l:h possible variables: c = CAID d = PID e = CSP hash g = ID of origin gbox peer h = checksum i = channel ID j = distance of gbox hops l = length o = ONID p = provider ID s = service ID w = CW y = payload use a value as prefix to hide variable with this value, control charac- ters will be escaped by "\" example: ecmfmt = c&0p/i/d/s/l:h.e_w (hide provider ID if 0) loghistorysize = bytes size of log message history in web interface or monitor, 0 = disabled, default:4096 maxlogsize = kbytes maximum log file size, 0 = unlimited, default:10 logduplicatelines = 0|1 1 = enable logging of duplicate lines in the log, default:0 disablelog = 0|1 1 = disable log file, default:0 cwlogdir = path directory for CW logging, default:config dir emmlogdir = path directory for EMM logging, default:config dir usrfile = filename log file for user logging, default:none log file format: date time CWs per second username IP address of client TCP/IP port CWs found CWs from cache CWs not found CWs ignored CWs timed out CWs tunneled login time in unix/POSIX format logout time in unix/POSIX format protocol disableuserfile = 0|1 1 = avoid logging although userfile is set, default:1 (also set automat- ically if userfile is empty) usrfileflag = 0|1 usrfile logging mode: 0 = only client logon/logoff will be logged in usrfile (default) 1 = each zapping of a client will be logged in usrfile disablemail = 0|1 1 = disable saving NDS Videoguard mail messages from provider, default:1 mailfile = file define file saving NDS Videoguard mail messages from provider, de- fault:none enableled = 0|1|2 0 = LED support disabled (default) 1 = LED support enabled for routers 2 = LED support enabled for Qbox HD waitforcards = 0|1 1 = wait for local SCs on startup before opening network ports, de- fault:1 waitforcards_extra_delay = delay additional delay in milli-seconds after waiting for local SCs on startup before opening network ports, default:500 preferlocalcards = 0|1 SC decoding behavior: 0 = local SCs used like a remote reader 1 = prefer cache exchange based SCs (default) 2 = prefer local SCs readerrestartseconds = seconds seconds beetween restarts, 0 = disable reader restart, default:5 block_same_ip = 0|1 1 = reject looping ECMs from clients to readers with the same IP ad- dress, default:1 block_same_name = 0|1 1 = reject looping ECMs from clients to readers with the same name, de- fault:1 clienttimeout = milli-seconds|seconds value (clienttimeout in seconds < 100, else milli-seconds) for client process to wait for key, default:5 clientmaxidle = seconds value for client process being idle before disconnect, 0 = idle discon- nect disabled, default:120 suppresscmd08 = 0|1 0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for re- jected CAID, service ID and provider ID combination, 1 = disable, can be overwritten per user in oscam.user, default:0 fallbacktimeout = milli-seconds time falling back to fallback reader, default:2500 fallbacktimeout_percaid = milli-seconds time falling back to CAID restricted fallback reader, default:2500 sleep = minutes time waiting for inactive users, default:none, can be overwritten per user in oscam.user serverip = IP address bind service to specified IP address, default:none bindwait = seconds value to wait for bind request to complete, default:120 netprio = 0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16|17|18|19|20 value for network priority: IPP value will be applied to SO_PRIORITY (system internal prioritization) DSCP value will be applied to IP_TOS/IPV6_TCLASS (the TOS field in the IP packet header) 0 = IPP=0; DSCP=CS0 (default) 1 = IPP=1; DSCP=CS1 2 = IPP=1; DSCP=AF11 3 = IPP=1; DSCP=AF12 4 = IPP=1; DSCP=AF13 5 = IPP=2; DSCP=CS2 6 = IPP=2; DSCP=AF21 7 = IPP=2; DSCP=AF22 8 = IPP=2; DSCP=AF23 9 = IPP=3; DSCP=CS3 10 = IPP=3; DSCP=AF31 11 = IPP=3; DSCP=AF32 12 = IPP=3; DSCP=AF33 13 = IPP=4; DSCP=CS4 14 = IPP=4; DSCP=AF41 15 = IPP=4; DSCP=AF42 16 = IPP=4; DSCP=AF43 17 = IPP=5; DSCP=CS5 18 = IPP=5; DSCP=EF 19 = IPP=6; DSCP=CS6 20 = IPP=7; DSCP=CS7 resolvegethostbyname = 0|1 set mode for DNS resolving: 0 = getadressinfo (default) 1 = gethostbyname failbancount = count number of incorrect logins after an ip address will be blocked, de- fault:0 failbantime = minutes time for IP based blocking for clients with an invalid login attempt, 0 = failban is disabled, default:0 dropdups = 0|1 mode for duplicate client connections (requirement: uniq > 0): 0 = mark client as duplicate, but don't disconnect them (default) 1 = drop duplicate connections instead of marking as duplicate unlockparental = 0|1 1 = unlock parental mode option to disable Seca and Viaccess pin code request for adult movie, default:0 double_check = 0|1 1 = ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher, default:0 double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two dig- its of CAID2]... ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none getblockemmauprovid = 0|1 1 = server overrides EMM blocking defined on client site, default:0 lb_mode = mode load balancing mode: 0 = load balance disabled, ECMs go to all readers (default) 1 = fastest reader first, after 5 ECMs the reader with the fastest response time will be selected 2 = oldest reader first, reader with the longest no answer 3 = lowest usage level, the usage level will be calculated by the sum of 5 ECMS response times, the higher a reader is busy, the higher is usage level lb_save = 0|counts save auto load balance statistics: 0 = saving of auto load balance statistics disabled (default) counts = save auto load balance statistics every counts ECMs (minimum 100) To save CPU power a minimum counts of 100 is recommended. lb_nbest_readers = counts set count of best readers for load balancing, default:1 lb_nfb_readers = counts set count of fallback readers for load balancing, default:1 lb_nbest_percaid = CAID1:count1[,CAID2:count2]... set count of best readers per CAIDs for load balancing, wildcard CAIDs with two-digit CAIDs possible, default:none example: lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 (wildcard CAIDs 03xx and 04xx) lb_min_ecmcount = counts minimal ECM count to evaluate load balancing values, default:5 lb_max_ecmcount = counts maximum ECM count before resetting load balancing values, default:500 lb_reopen_seconds = seconds time between retrying failed load balanced readers/CAIDs/providers/ser- vices, default:900 lb_reopen_invalid = 0|fB1 0 = E_INVALID will be blocked until statistics has been cleaned, de- fault:1 lb_force_reopen_always = 0|1 1 = force reopening immediately all failing readers if no matching reader was found, default:0 lb_retrylimit = milli-seconds retry next load balanced reader only if response time is higher then lb_retrylimit, default:0 lb_savepath = filename filenanme for saving load balancing statistics, default:/tmp/.oscam/stat lb_stat_cleanup = hour hours after the load balancing statistics will be deleted, default:336 lb_retrylimits = CAID1:time1[,CAID2:time2]... load balancing retry limit time per CAID, wildcard CAIDs with two-digit CAIDs possible, default:none example: lb_retrylimits = 12:0100,34:0200,5678:0300 (wildcard CAIDs 12xx and 34xx) lb_noproviderforcaid = CAID1[,CAID2]... ignore provider information for CAIDs to reduce load balancing statistic data, wildcard CAIDs with two-digit CAIDs possible, default:none example: lb_noproviderforcaid = 0100,02,0300,04 (wildcard CAIDs 02xx and 04xx) lb_max_readers = limit restrict the reader count to limit during load balancing learning: 0 = unlimited (default) limit = restrict load balancer readers to limit lb_auto_timeout = 0|1 1 = enable automatic timeout based on load balancing statistics, de- fault:0 lb_auto_timeout_p = percent percent added to average time as timeout time, default:30 lb_auto_timeout_t = milli seconds minimal time added to average time as timeout time, default:300 lb_auto_betatunnel = 0|1 1 = enable automatic Betacrypt tunneling detection for CAIDs 1801, 1833, 1834, and 1835 for load balancing, Betacrypt defintion in oscam.user with betatunnel will be prefered, default:1 lb_auto_betatunnel_mode = 0|1|2 set mode for automatic Betacrypt tunneling: 0 = CAID 18XX tunneling to CAID 17X2 only (default) 1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801) 2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834) 3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835) 4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only) 5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only) 6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only) lb_auto_betatunnel_prefer_beta = direction set direction for automatic Betacrypt/Nagravision selection: 0 = disabled (default) 1 = always Betacrypt 105 = represents the middle 200 = always Nagravision The [monitor] section port = 0|port UDP port for monitor, 0 = monitor disabled, default:0 serverip = IP address bind service to specified IP address, default:all nocrypt = IP address|IP address range[,IP address|IP address range]... unsecured monitor connection, default:none example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255 aulow = minutes time no EMM occurs so that client is set to low, switch from status "ac- tive" to "on", default:30 monlevel = 0|1|2|3|4 monitor level: 0 = no access to monitor 1 = only server and own procs 2 = all procs, but viewing only (default) 3 = all procs, reload of oscam.user possible 4 = complete access monlevel can be overwritten per user in oscam.user. hideclient_to = seconds time to hide clients in the monitor if not sending requests, 0 = dis- abled, default:25 The [webif] section httpport = [+]port port for web interface, 0 = disabled, praefix + = enable SSL, de- fault:none, required httpcert = file file for http SSL certificate, default:oscam.pem httpforcesslv3 = 0|1 1 = force using SSLv3, default:0 httpuser = username username for password protection, default:none httppwd = password password for password protection, default:none httpcss = path path for external CSS file, default:none http_prepend_embedded_css = 0|1 1 = embedded CSS will be added before external CSS , default:0 httptpl = path path for external templates and picons, multiple simultaneously tem- plates and picons are possible by creating sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub folder in URL, default:none example: httptpl = /this/is/my/path folder with multiple templates: /this/is/my/path/template1 /this/is/my/path/template2 valid URLs: http://host:port/template1 http://host:port/template2 httpjscript = path path for oscam.js javascript, default:none httprefresh = seconds status refresh in seconds, default:none httphideidleclients = 0|1 1 = enables hiding clients after idle time set in parameter hide- client_to, default:0 httphidetype = type[type]... characters defining columns to hide in web interface status page (see type column), default:none types: 'c': client 'h': http 'm': monitor 'p': proxy 'r': reader 's': server 'x': cache exchange httpscript = path path to an executable script which you wish to start from web interface, default:none httpallowed = IP address|IP address range[,IP address|IP address range]... http web interface connections allowed, de- fault:127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1 example: httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255 httpdyndns = hostname[,hostname][,hostname] http web interface connections allowed, default:none example: httpdyndns = host.example.com httpdyndns = host1.example.com,host2.example.com httpsavefullcfg = 0|1 write config: 0 = all not empty parameters, all not default parameters, all parameters not containing the same value as the same parameter in global configuration (default) 1 = all parameters httpoverwritebakfile = 0|1 1 = overwrite backup configuration files, default:0 httpreadonly = 0|1 1 = read only modus for web interface, default:0 httpshowpicons = 0|1 1 = show picons in user list, default:0 httppiconpath = path path to picons, default:none httphelplang = en|de|fr|<available wiki languages> set right language for wiki entry point, default:en httplocale = environment set the locale environment, default:none The [lcd] section httposcamlabel = text set individual label in web interface header, default:OSCam enablelcd = 0|1 1 =enable LCD output, default:0 lcd_outputpath = path path for LCD output, default:/tmp lcd_hideidle = 0|1 1 = hide reader in LCD output if reader idle > 20 seconds, default:0 lcd_writeintervall = seconds LCD refresh interval (minimum 5), default:10 The [cache] section delay = milli-seconds value to delay cached requests, default:0 max_time = seconds maximum time CWs resist in cache, the time must be 2 seconds highter than the parameter clienttimeout, default:15 max_hit_time = seconds maximum time for cache exchange hits resist in cache for evaluating wait_time, default:15 wait_time = [caid][&mask][@provid][$servid][:awtime][:]dw- time[,[caid][&mask][@provid][$servid][:awtime][:]dwtime]... wait time in milli-seconds for cache exchange and Cardservproxy before sending ECMs to reader or proxy, default:none example: wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200 cacheexenablestats = 0|1 1 = enable statistics for cache exchange mode, default:0 Please consider memory consumption. cacheex_cw_check = [caid][&mask][@provid][$servid]:mode:counter[,[caid][&mask][@provid][$servid]:mode:counter]... mode = specify behaviour for counter: 0 = when wait_time expires, serve highest counter's CW got anyway, even if no counter reached (default) 1 = never serve CW from cache exchange stored in cache, if it's counter not reaches counter. When wait_time expires, requests will go to normal readers counter = set minimum CW counter to allow CW is used, default:1 cacheex_mode1_delay = CAID1:time,[BCAID2:time]... delay in milli-seconds for asking cache exchange mode 1 readers, de- fault:none csp_port = port UDP port of Cardservproxy for cache exchange, default:none csp_serverip = IP bind Cardservproxy for cache exchange to specified IP address, de- fault:none csp_ecm_filter = [caid][&mask][@provid][$servid][,[caid][&mask][@provid][$servid]]... Cardservproxy incoming ECM filter setting, default:none csp_allow_request = 0|1 allow incoming ECM request from Cardservproxy, default:1 csp_allow_reforward = 0|1 1 = reforward other cacheex updates to Cardservproxy peers, option could cause loops, default:0 cwcycle_check_enable = 0|1 1 = enable CW cycle check, default:0 cwcycle_check_caid = CAID[,CAID]... CAID enabled for CW cycle check, default:none cwcycle_maxlist = count maximum CW cycle list entries, default:500, maximum:4000 cwcycle_keeptime = minutes minimum time a learned cycle time resists in memory, default:15, maxi- mum:15 cwcycle_onbad = 0|1 0 = log bad CW cycle only, 1 = drop bad CW cycle, default:1 cwcycle_dropold = 0|1 1= drop old CW cycle, default:1 cwcycle_sensitive = 0|2|3|4 drop CW mode: 0 = disabled 2 = 2 (or more) same bytes and drop new CW 3 = 3 (or more) same bytes and drop new CW 4 = 4 (or more) same bytes and drop new CW (default) cwcycle_allowbadfromffb = 0|1 1 = allow bad cycles from a fixed fallback reader, default:0 cwcycle_usecwcfromce = 0|1 1 = use CW info from cache exchange, default:0 wait_until_ctimeout = 0|1 answer when cache exchange timeout expires, if no normal readers are available for sending ECMs: 0 = immediately send 'not found' to client (default) 1 = wait for cache exchange answer until client timeout expires The [camd33] section port = 0|port TCP port for camd 3.3x clients, 0 = disabled, default:0 serverip = IP address bind service to specified IP address, default:all nocrypt = IP address|IP address range[,IP address|IP address range]... unsecured camd 3.3x client connection, default:none example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255 passive = 0|1 1 = force passive camd 3.3x client, default:0 key = 128 bit key key for camd 3.3x client encryption, default:none example: key = 01020304050607080910111213141516 The [cs357x] section port = 0|port UDP port for camd 3.57x clients, 0 = disabled, default:0 serverip = IP address bind service to specified IP address, default:all suppresscmd08 = 0|1 0 = tell camd 3.5x / 3.57x clients not to request again for rejected CAID, service ID and provider ID combination, 1 = disable, can be over- written per user in oscam.user, default:0 The [cs378x] section port = 0|port[@CAID][:provid][,provid]...[;port@CAID[:provid][,provid]...]... TCP port/CAID/provid definitions for camd 3.78x clients, 0 = disabled, default:0 examples: port = 10000@0100:100000;20000@0200:200000,300000,400000 port = 30000 serverip = IP address bind service to specified IP address, default:all keepalive = 0|1 0 = disable camd 3.78x keepalive modus, default:0 suppresscmd08 = 0|1 0 = tell camd 3.78x clients not to request again for rejected CAID, ser- vice ID and provider ID combination, 1 = disable, can be overwritten per user in oscam.user, default:0 The [newcamd] section key = DES key default key for newcamd client encryption, default:none example: key = 0102030405060708091011121314 port = port[{DES key}]@CAID[:provid][,provid]...[;port[{DES key}]@CAID[:provid][,provid]...]... TCP port/DES key/CAID/provid definitions, default:none example: port = 10000@0100:100000;20000{0102030405060708091011121314}@0200:200000,300000 Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES key will be used. serverip = IP address bind newcamd service to specified IP address, default:all allowed = IP address|IP address range[,IP address|IP address range]... newcamd client connections allowed from, default:none example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255,::1 keepalive = 0|1 0 = disable newcamd keepalive modus, default:0 mgclient = 0|1 1 = provide share information of all available CAIDs and provider IDs to mgcamd clients, default:0 The [radegast] section port = 0|port TCP/IP port for radegast clients, 0 = disabled, default:0 serverip = IP address bind service to specified IP address, default:all allowed = IP address|IP address range[,IP address|IP address range]... client connections allowed from, default:none example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255 user = username user name for radegast client The [serial] section device = <user>@<device>[:baud][?option1=value1[&option2=value2]...] [;<user>@<device>[:baud][?option1=value1[&option2=value2]...]]... parameters: user = account device = serial device name|hostname|IP,port baud = serial port speed (for serial devices only) option = timeout = milli-seconds, timeout for connection, default:50 delay = milli-seconds, additional delay between two characters, default:0 supported serial devices (autodection): HSIC (humax sharing interface client) SSSP (simple serial sharing protocol) bomba (BOMBA firmware) dsr9500 (DSR 9500) example: user1@/dev/ttyS1:115200?delay=1&timeout=5000 user2@192.160.0.1,12345?delay=1&timeout=5000 The [cccam] section port = 0|port[,0|port]... TCP/IP ports for CCcam clients, 0 = disabled, default:0 version = <main version>.<version>.<sub version> define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none example: version = 1.2.34 reshare = level reshare level for CCcam clients (default:10): -1 = no resharing 0 = resharing for direct peer only 1 = resharing for direct peer and next level x = resharing for direct peer and next x level reshare_mode = mode CCcam reshare mode: 0 = reader reshares only received SCs for CCcam readers, defined filters/CAIDs/provids on other readers 1 = reader reshares received SCs (like=0) and defined services 2 = reader reshares only defined reader services as virtual SCs 3 = reader reshares only defined user services as virtual SCs 4 = reader reshares only received SCs (default) Every server is shared as hop = 0 and with defined reshare values. Service reshare only works if positive services defined: no service - no reshare! ignorereshare = 0|1 CCcam reshare setting: 0 = use reshare setting of server (default) 1 = use reshare setting of reader or user stealth = 0|1 1 = behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server, default:0 minimizecards = mode mode how to provide CCcam servers to CCcam clients: 0 = no aggregation, remove duplicates only (default) 1 = based on minimum hop: two SCs with different hops are summarized, new SCs get a smaller hop 2 = aggregation based on CAIDs: all SCs with the same CAIDs will be merged, provider (maximum 32) will be merged, too updateinterval = seconds interval to provide share list update to CCcam clients, values <= 10 are invalid and will be set to 30, default:240 keepconnected = 0|1 set CCcam keepalive modus: 0 = disconnect client when maximum idle time is reached 1 = keep client connected (default) recv_timeout = milli-seconds set network timeout for receiving data, default:2000 forward_origin_card = 0|1 1 = forward ECM request to reader holding this card, load balancer, fallback and caching will be disabled, default:0 nodeid = ID set CCcam node ID in hex, default:none example: nodeid = 0a0b0c0d0e0f1011 The [gbox] section hostname = hostname| IP address set hostname or IP address for gbox protocol, default:none port = port[,port]... UDP port for gbox server, default:0 my_password = password password for connection to local gbox peer, default:none proxy_card = <CAID><provid>[,<CAID><provid>]... proxy reader SCs to be reshared into gbox network, default:none ccc_reshare = 0|1 1 = enable CCCam reshare, default:0 my_vers = version set gbox version in hexadecimal low byte, default:2A my_cpu_api = byte set gbox CPU and API byte in hexadecimal, default:40 gbox_reconnect = time send hello message to peers in seconds, default:180, min:60, max:300 log_hello = 0|1 1 = log hello messages, default:1 dis_attack_txt = 0|1 1 = disable creation of attack.txt, default:0 gsms_disable = 0|1 1 = disable gbox short message service (GSMS),default:1 sending a messeage: /tmp/gsms.txt: <box ID> <1=mormal message|2=OSD/TV message> <message 6 to 127 characters>, status will be stored in '/tmp/gsms.ack' respective 'gsms.nack', receiving a message: The message will be stored in /tmp/gsms.log tmp_dir = path temporary directory for gbox, default:/tmp/.oscam accept_remm_peer = peer-id1[,peer-id2]... accept REMM requests from gbox peer(s), default:none The [scam] section port = port UDP port for scam server, default:0 The [dvbapi] section enabled = 0|1 1 = DVB API enabled, default:0 Create file /tmp/.pauseoscam to pause DVB API, e.g. if STB goes into standby and OSCam remains as SC server only. listen_port = 0|port TCP/IP port for SAT IP clients, filtering has to be done on client site, 0 = disabled, default:0 user = username user name for DVB API client, default:anonymous ignore = <CAID>[,<CAID>]... (detached by oscam.dvbapi, obsolete) CAIDs to be ignored, default:none services = <service ID>[,<service ID>]... (detached by oscam.dvbapi, obso- lete) services to be prioritized, default:none priority = <CAID>:<provider ID>[,CAID:<provider ID>]... (detached by os- cam.dvbapi, obsolete) CAIDs and provider IDs to be prioritized, default:CAIDs and provider IDs of local SCs will be prioritized au = 0|1|2 AU mode: 0 = disable AU (default) 1 = enable AU pmt_mode = 0|1|2|3|4|5 PMT mode: 0 = use camd.socket and PMT file, default 1 = disable reading PMT file 2 = disable camd.socket 3 = read PMT file on startup only 4 = do not use signal handler for monitoring /tmp 5 = do not use signal handler for monitoring /tmp, disable camd.socket ecminfo_file = 0|1 ecm.info file: 0 = Disable ecm.info file 1 = Enable ecm.info file (default) ecminfo_type = 0|1|2|3|4|5 ecm.info types: 0 = OSCam syntax (default) 1 = OSCam syntax with ECM time in ms instead of seconds 2 = WiCardd 3 = mgcamd 4 = CCcam 5 = camd3 request_mode = 0|1 CAID request mode: 0 = try all possible CAIDs one by one (default) 1 = try all CAIDs simultaneously boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|cool- stream|neumo|samygo|pc set boxtype, auto detection of DVB API will be aspired, default:dreambox ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only pc is for generic pc support (currently supported on VDR with vdr-plu- gin-dvbapi) read_sdt = 0|1|2 mode of provider, channel name and service type auto detection via SDT: 0 = disabled (default) 1 = enabled for non FTA channels only 2 = enabled for all channels write_sdt_prov = 0|1 mode writing provider name into oscam.srvid2 file: 0 = disabled (default) 1 = enabled cw_delay = milli-seconds delay of CW writing, default:none delayer = milli-seconds minimum time to write CW, default:0 reopenonzap = 0|1 1 = reopen demux devices on each channel switching, default:0 The [anticasc] section enabled = 0|1 1 = enable anti-cascading, default:0 numusers = quantity anti-cascading: user per account, 0 = anti-cascading disabled, default:0 sampletime = minutes duration of sample, default:2 samples = quantity quantity of samples over limit, default:10 penalty = 0|1|2|3 level of penalty: 0 = only logging (default) 1 = send fake CWs 2 = temporary user ban 3 = send delayed CWs penalty can be overwritten per user in oscam.user. aclogfile = filename file for anti-cascading logging, default:none fakedelay = milli-seconds fake delay time, default:1000, minimum value is 100, maximum value is 3000 denysamples = quantity how many samples should be penalized, default:8 acosc_enabled = 0|1 1 = enable anti-cascading over SID count, default:0 acosc_max_ecms_per_minute = count maximum ecms per minute, 0 = unlimited, default:0 Can be overwritten per user in oscam.user. acosc_max_active_sids = count maximum active SIDs with anti-cascading over SID, 0 = unlimited, de- fault:0 Can be overwritten per user in oscam.user. acosc_zap_limit = count zap limit for anti-cascading over SID, 0 = unlimited, default:0 Can be overwritten per user in oscam.user. acosc_penalty = 0|1|2|3|4 level of penalty with anti-cascading over SID count: 0 = only logging (default) 1 = send fake CWs 2 = temporary user ban 3 = send delayed CWs 4 = temporary hidecards to the client Can be overwritten per user in oscam.user. acosc_penalty_duration = seconds penalty duration for anti-cascading over SID count, default:0 Can be overwritten per user in oscam.user. acosc_delay = milli-seconds delay for anti-cascading over SID count, default:0 Can be overwritten per user in oscam.user. LOGGING * reader stages 1 = cacheex (=1) reader (C) 2 = local SCs (L) 3 = other reader / proxies (P) 4 = fallback reader (F) * logging format stage/used/chosen/possible MONITOR monitor commands: * login <user> <password> login (for unencrypted connections only) * getuser <user> <parameter>=<value> get parameter for user * setuser <user> <parameter>=<value> set parameter for user * setserver <parameter>=<value> set parameter for server * exit exit monitor * log <on|onwohist|off> enable|enable without hitory|disable logging for 2 minutes * status list of current processes and clients * shutdown shutdown OSCam * restart restart OSCam * keepalive send keepalive * reload reinit user db, clients and anti-cascading, for newcamd connections: af- ter reloading the provid, please restart newcamd client * details <PID> details about selected PID * reread read again * debug <level> set debug level (monlevel > 3 required) debug level mask: 0 = no debugging (default) 1 = detailed error messages 2 = ATR parsing info, ECM dumps, CW dumps 4 = traffic from/to the reader 8 = traffic from/to the clients 16 = traffic to the reader-device on IFD layer 32 = traffic to the reader-device on I/O layer 64 = EMM logging 128 = DVB API logging 256 = load balacing logging 512 = cache exchange logging 1024 = client ECM logging 65535 = debug all * version show OSCam version * commands show all valid monitor commands WEB INTERFACE * template system The web interface allows you to create your own template. For developing your own template request the orignal template with the non-linked page savetemplates.html. Store your own template in the directory specified by httptpl. CACHING types of ECM caching: * cache1 ECM and CW in cache already. * cache2 ECM and checksum in cache already. SEE ALSO list_smargo(1), oscam(1), oscam.ac(5), oscam.cacheex(5), oscam.cert(5), os- cam.dvbapi(5), oscam.fakecws(5), oscam.guess(5), oscam.ird(5), os- cam.provid(5), oscam.ratelimit(5), oscam.server(5), oscam.services(5), os- cam.srvid(5), oscam.srvid2(5), oscam.tiers(5), oscam.user(5), os- cam.whitelist(5) oscam.conf(5)
NAME | SYNOPSIS | DESCRIPTIONS | LOGGING | MONITOR | WEB INTERFACE | CACHING | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=oscam.conf&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>