FreeBSD Manual Pages
oscam.user(5) File Formats Manual oscam.user(5) NAME oscam.user - user configuration file for OSCam SYNOPSIS The user configuration file for OSCam contains user definitions. [account] sections in oscam.user are recurring (more than one account). DESCRIPTIONS The [account] section user = name account name, required pwd = password password for account, required description = text description of user account disabled = 0|1 1 = account disabled, default:0 hostname = hostname host from which user connection is allowed expdate = <year>-<month>-<day>|<year>/<month>/<day> expiration date for account, default:none example: expdate = 2001-11-21 expdate = 2002/12/22 allowedprotocols = [camd33][,][camd35][,][cs357x][,][cs378x][,][new- camd][,][cccam][,][gbox][,][radegast] list of all allowed connection protocols, default:all connection proto- cols allowedtimeframe = DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM] [;DAY@HH:MM- HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM]] where DAY=SUN,MON,TUE,WED,THU,FRI,SAT or ALL (for all possible days) account enabled from hh:mm to hh:mm for the specified day(s), de- fault:none comma (,) to separate times and semicolon(; ) to separate the different days. You can use ALL@ if you want the same time frames for everyday. Example: allowedtimeframe=ALL@10:00-22:00;MON@00:00-02:00,02:45-04:37; FRI@00:00-10:00,22:00-24:00;SAT@00:00-24:00 If you use: DAY@22:00-05:00 this will be turned into DAY@00:00-05:00,22:00-24:00 ALL@ is always checked and used, so you can watch TV the whole day on FRIday in this exemple. There is no problem to overlap ALL@ in a day de- finition, like for SAT@ definition. max_connections = count maximum allowed connections per user when unique level will be adducted, default:1 uniq = 0|1|2|4 unique level: 0 = disabled (default) 1 = only one connection per user is allowed 2 = set user to fake if source ip is different (e.g. for newcamd clients with different CAIDs and ports) 3 = only one connection per user, but only the last login will survive (old MpCS behavior) 4 = set user only to fake if source ip is different, but only the last login will survive numusers = quantity anti-cascading: user per account, 0 = anti-cascading disabled, -1 = global value from oscam.conf, default:-1 penalty = 0|1|2 level of penalty: -1 = level of oscam.conf (default) 0 = only logging 1 = send fake CWs 2 = temporary user ban 3 = send delayed CWs fakedelay = 0|1|milli-seconds set fake delay time individually for user: 0 = disable fake delay -1 = fake delay of oscam.conf (default) acosc_max_ecms_per_minute = count maximum ecms per minute, 0 = unlimited, -1 = use global setting, de- fault:0 acosc_max_active_sids = count maximum active SIDs with anti-cascading over SID, 0 = unlimited, -1 = use global setting, default:0 acosc_zap_limit = count zap limit for anti-cascading over SID, 0 = unlimited, -1 = use global setting, default:0 acosc_penalty = 0|1|2|3|4|-1 level of penalty with anti-cascading over SID count: 0 = only logging (default) 1 = send fake CWs 2 = temporary user ban 3 = send delayed CWs 4 = temporary hidecards to the client -1 = use global setting acosc_penalty_duration = seconds penalty duration for anti-cascading over SID count, -1 = use global set- ting, default:0 acosc_delay = milli-seconds delay for anti-cascading over SID count, -1 = use global setting, de- fault:0 failban = 0|2|4|8 mask for IP address based blocking: 0 = ignore (default) 2 = block IP address of a disabled account on connecting 4 = block IP address of a sleeping account while sleeping comes up 8 = block duplicate IP address lb_nbest_readers = counts set count of best readers for load balancing, -1 = use global lb_nbest_readers, default:-1 lb_nfb_readers = counts set count of fallback readers for load balancing, -1 = use global lb_nfb_readers, default:1 lb_nbest_percaid = CAID1:count1[,CAID2:count2]... set count of best readers per CAIDs for load balancing, wildcard CAIDs with two-digit CAIDs possible, default:none example: lb_nbest_percaid = 0100:4,0200:3,03:2,04:1 (wildcard CAIDs 03xx and 04xx) preferlocalcards = 0|1 SC decoding behavior:. -1 = global value from oscam.conf (default) 0 = local SCs used like a remote reader 1 = prefer cache exchange based SCs 2 = prefer local SCs cwc_disable = 0|1 1 = disbale CW cycle check, default:0 cacheex = 0|1|2|3 set cache exchange mode 0: disable cache exchange mode (default) 1: enable cache exchange pull mode 2: enable cache exchange push mode for camd 3.5x / 3.57x and CCcam protocol 3: enable reverse cache exchange push mode for camd 3.5x / 3.57x and CCcam protocol Identical cache exchange modes must be set on local OSCam user account and remote OSCam server. Please consider memory consumption. cacheex_maxhop = hops define maximum hops for cache exchange, default=10 no_wait_time = 0|1 set wait time behaviour: 0: use wait_time set in oscam.conf (default) 1: do not use wait_time set in oscam.conf csp_ecm_filter = [caid][&mask][@provid][$servid],n cache exchange incoming ECM filter setting (mode 3 only) for Card- servproxy, default:none cacheex_drop_csp = 0|1 1 = drop incoming Cardservproxy cache (mode 3 only), detection is zero ecmd5, default:0 cacheex_allow_request = 0|1 1 = allow incoming ECM request (mode 3 only), default:1 cacheex_allow_filter = 0|1 1= allow cache exchange filter (for cache exchange mode 3 only), de- fault:1 cacheex_block_fakecws = 0|1 1 = enable fake DCWs blocking (for cache exchange mode 3 only), get fake DCWs form oscam.fakecws, default:0 sleep = minutes time waiting for inactive user, default:none sleepsend = 0|255 255 = OSCam client only: stopping requests until next zap, 255 = camd 3.x only: stopping requests until restart of camd 3.x client, default:0 suppresscmd08 = 0|1 0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for re- jected CAID, service ID and provider ID combination, 1 = disable, de- fault:0 keepalive = 0|1 0 = disable keepalive between server and client for newcamd or CCcam protocol, default:1 umaxidle = seconds value for user being idle before disconnect, 0 = idle disconnect dis- abled, -1 use clientmaxidle in global section, default:-1 caid = <CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:<target CAID>]]... limit and mapping of CAIDs, default:all CAIDs with mask FFFF example: caid = 0100 caid = 0200&ffee:0300 caid = 0400&ff00:0500,0600 caid = 0702,0722 caid = 0702&ffdf (shortcut for the example above) au = label of reader[,label of reader]...|1 AU setting, default:none: label of reader = sending EMMs to specified reader (security issue: clients can see SC data!) 1 = auto AU is sending EMMs to all readers (security issue: clients can see SC data!) group = 1..64[,1..64]... user assingment to reader groups, default:none, required betatunnel = <CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>: <target CAID>]... Define Betacrypt tunneling. The ServiceID can also be used for wild- carded CAIDs. example: betatunnel = 0100.0001:0200,0300.0004:0500 betatunnel = 0600.FFFF:0700 Be carefull using abbreviations. emmreassembly = 0|1||2 EMM reassembly, should be set for Viaccess and Cryptoworks readers if the client that you are using to send EMMs is reassembling them instead of just sending them to OSCam for processing. 0: disabled 1: enabled for DVB API 2: enabled (default) services = [!]services[,[!]<services>]... user [de]assingment to service group, default:none ident = <CAID>:<provid>[,<provid>,...][;<CAID>:<provid>[,<provid>,...]]... user assingment to SC specific idents, default:none class = [!]class[,[!]class]... user [de]assingment to SC specific classes, default=none example: class = 01,02,!03,!04 chid = <CAID>:<ChID>[,<CAID>:<ChID>]... user assingment to SC specific ChIDs, default:none monlevel = 0|1|2|3|4 monitor level: 0 = no access to monitor (default) 1 = only server and own procs 2 = all procs, but viewing only 3 = all procs, reload of oscam.user possible 4 = complete access cccmaxhops = hops maximum hops limit for CCcam clients, default:10 -1 = CCcam disabled for this user 0 = local SCs only 1 = local SCs + 1 hop 2 = local SCs + 2 hops and so on cccreshare = level reshare level for CCcam clients -1 = use reshare level of oscam.conf (default) 0 = resharing for direct peer only x = resharing for direct peer and share level x cccignorereshare = -1|0|1 CCcam ignore reshare setting: -1 = use ignore reshare level of oscam.conf (default) 0 = use ignore reshare setting of server 1 = use ignore reshare setting of reader or user cccstealth = -1|1 CCcam stealth: -1 = use CCcam stealth of oscam.conf (default) 0 = use extended OSCam-CCcam protocol 1 = behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server EXAMPLES [account] user = username pwd = password group = 1 au = myserialmousereader services = myservice betatunnel = 0100.0001:0101,0100.0002:0101 caid = 0100 ident = 0100:000000 uniq = 1 SEE ALSO list_smargo(1), oscam(1), oscam.ac(5), oscam.cacheex(5), oscam.cert(5), os- cam.conf(5), oscam.dvbapi(5), oscam.fakecws(5), oscam.guess(5), os- cam.ird(5), oscam.provid(5), oscam.ratelimit(5), oscam.server(5), os- cam.services(5), oscam.tiers(5), oscam.srvid(5), oscam.srvid2(5), os- cam.whitelist(5) oscam.user(5)
NAME | SYNOPSIS | DESCRIPTIONS | EXAMPLES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=oscam.user&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>