FreeBSD Manual Pages
OSMIUM-EXTRACT(1) OSMIUM-EXTRACT(1) NAME osmium-extract - create geographical extracts from an OSM file SYNOPSIS osmium extract --config CONFIG-FILE [OPTIONS] OSM-FILE osmium extract --bbox LEFT,BOTTOM,RIGHT,TOP [OPTIONS] OSM-FILE osmium extract --polygon POLYGON-FILE [OPTIONS] OSM-FILE DESCRIPTION Create geographical extracts from an OSM data file or an OSM history file. The region (geographical extent) can be given as a bounding box or as a (multi)polygon. There are three ways of calling this command: * Specify a config file with the --config/-c option. It can define any number of regions you want to cut out. See the CONFIG FILE section for details. * Specify a bounding box to cut out with the --bbox/-b option. * Specify a (multi)polygon to cut out with the --polygon/-p option. The input file is assumed to be ordered in the usual order: nodes first, then ways, then relations. If the --with-history/-H option is used, the command will work correctly for history files. This currently works for the complete_ways strategy only. The simple or smart strategies do not work with history files. A history extract will contain every version of all objects with at least one version in the region. Generating a history extract is somewhat slower than a normal data extract. Osmium will make sure that all nodes on the vertices of the boundary of the region will be in the extract, but nodes that happen to be directly on the boundary, but between those vertices, might end up in the extract or not. In almost all cases this will be good enough, but if you want to make re- ally sure you got everything, use a small buffer around your region. By default no bounds will be set in the header of the output file. Use the --set-bounds option if you need this. Note that osmium extract will never clip any OSM objects, ie. it will not remove node references outside the region from ways or unused relation mem- bers from relations. This means you might get objects that are not refer- ence-complete. It has the advantage that you can use osmium merge to merge several extracts without problems. OPTIONS -b, --bbox=LONG1,LAT1,LONG2,LAT2 Set the bounding box to cut out. Can not be used with --polygon/-p, --config/-c, or --directory/-d. The coordinates LONG1,LAT1 are from one arbitrary corner, the coordinates LONG2,LAT2 are from the oppo- site corner. -c, --config=FILE Set the name of the config file. Can not be used with the --bbox/-b or --polygon/-p option. If this is set, the --output/-o and --out- put-format/-f options are ignored, because they are set in the con- fig file. --clean=ATTR Clean the attribute (version, timestamp, changeset, uid, user), from the data before writing it out again. The attribute will be set to 0 (the user will be set to the empty string). This option can be given multiple times. Depending on the output format these attrib- utes might show up as 0 or not show up at all. -d, --directory=DIRECTORY Output directory. Output file names in the config file are relative to this directory. Overwrites the setting of the same name in the config file. This option is ignored when the --bbox/-b or --poly- gon/-p options are used, set the output directory and name with the --output/-o option in that case. -H, --with-history Specify that the input file is a history file. The output file(s) will also be history file(s). -p, --polygon=POLYGON_FILE Set the polygon to cut out based on the contents of the file. The file has to be a GeoJSON, poly, or OSM file as described in the (MULTI)POLYGON FILE FORMATS section. It has to have the right suf- fix to be detected correctly. Can not be used with --bbox/-b, --config/-c, or --directory/-d. -s, --strategy=STRATEGY Use the given strategy to extract the region. For possible values and details see the STRATEGIES section. Default is "complete_ways". -S, --option=OPTION=VALUE Set a named option for the strategy. If needed you can specify this option multiple times to set several options. --set-bounds Set the bounds field in the header. The bounds are set to the bbox or envelope of the polygon specified for the extract. Note that strategies other than "simple" can put nodes outside those bounds into the output file. COMMON OPTIONS -h, --help Show usage help. -v, --verbose Set verbose mode. The program will output information about what it is doing to STDERR. INPUT OPTIONS -F, --input-format=FORMAT The format of the input file(s). Can be used to set the input for- mat if it can't be autodetected from the file name(s). This will set the format for all input files, there is no way to set the for- mat for some input files only. See osmium-file-formats(5) or the libosmium manual for details. OUTPUT OPTIONS -f, --output-format=FORMAT The format of the output file. Can be used to set the output file format if it can't be autodetected from the output file name. See osmium-file-formats(5) or the libosmium manual for details. --fsync Call fsync after writing the output file to force flushing buffers to disk. --generator=NAME The name and version of the program generating the output file. It will be added to the header of the output file. Default is "os- mium/" and the version of osmium. -o, --output=FILE Name of the output file. Default is `-' (STDOUT). -O, --overwrite Allow an existing output file to be overwritten. Normally osmium will refuse to write over an existing file. --output-header=OPTION=VALUE Add output header option. This command line option can be used mul- tiple times for different OPTIONs. See the osmium-output-headers(5) man page for a list of available header options. For some commands you can use the special format "OPTION!" (ie. an exclamation mark after the OPTION and no value set) to set the value to the same as in the input file. CONFIG FILE The config file mainly specifies the file names and the regions of the ex- tracts that should be created. The config file is in JSON format. The top-level is an object which con- tains at least an "extracts" array. It can also contain a "directory" en- try which names the directory where all the output files will be created: { "extracts": [...], "directory": "/tmp/" } The extracts array specifies the extracts that should be created. Each item in the array is an object with at least a name "output" naming the output file and a region defined in a "bbox", "polygon" or "multipolygon" name. An optional "description" can be added, it will not be used by the program but can help with documenting the file contents. You can add an optional "output_format" if the format can not be detected from the "out- put" file name. Run "osmium help file-formats" to get a description of al- lowed formats. The optional "output_header" allows you to set additional OSM file header settings such as the "generator". If you set the value of a file header setting to null, the output header will be set to the same header from the input file. "extracts": [ { "output": "hamburg.osm.pbf", "output_format": "pbf", "description": "optional description", "bbox": ... }, { "output": "berlin.osm.pbf", "description": "optional description", "polygon": ... }, { "output": "munich.osm.pbf", "output_header": { "generator": "MyExtractor/1.0", "osmosis_replication_timestamp": null }, "description": "optional description", "multipolygon": ... } ] There are several formats for specifying the regions: bbox: A bounding box in one of two formats. The first is a simple array with four real numbers, the first two specifying the coordinates of an arbitrary corner, the second two specifying the coordinates of the opposite corner. { "output": "munich.osm.pbf", "description": "Bounding box specified in array format", "bbox": [11.35, 48.05, 11.73, 48.25] } The second format uses an object instead of an array: { "output": "dresden.osm.pbf", "description": "Bounding box specified in object format", "bbox": { "left": 13.57, "right": 13.97, "top": 51.18, "bottom": 50.97 } } polygon: A polygon, either specified inline in the config file or read from an ex- ternal file. See the (MULTI)POLYGON FILE FORMATS section for external files. If specified inline this is a nested array, the outer array defin- ing the polygon, the next array the rings and the innermost arrays the co- ordinates. This format is the same as in GeoJSON files. In this example there is only one outer ring: "polygon": [[ [9.613465, 53.58071], [9.647599, 53.59655], [9.649288, 53.61059], [9.613465, 53.58071] ]] In each ring, the last set of coordinates should be the same as the first set, closing the ring. multipolygon: A multipolygon, either specified inline in the config file or read from an external file. See the (MULTI)POLYGON FILE FORMATS section for external files. If specified inline this is a nested array, the outer array defin- ing the multipolygon, the next array the polygons, the next the rings and the innermost arrays the coordinates. This format is the same as in GeoJ- SON files. In this example there is one outer and one inner ring: "multipolygon": [[[ [6.847, 50.987], [6.910, 51.007], [7.037, 50.953], [6.967, 50.880], [6.842, 50.925], [6.847, 50.987] ],[ [6.967, 50.954], [6.969, 50.920], [6.932, 50.928], [6.934, 50.950], [6.967, 50.954] ]]] In each ring, the last set of coordinates should be the same as the first set, closing the ring. Osmium must check each and every node in the input data and find out in which bounding boxes or (multi)polygons this node is. This is very cheap for bounding boxes, but more expensive for (multi)polygons. And it becomes more expensive the more vertices the (multi)polyon has. Use bounding boxes or simplified polygons where possible. Note that bounding boxes or (multi)polygons are not allowed to span the -180/180 degree line. If you need this, cut out the regions on each side and use osmium merge to join the resulting files. (MULTI)POLYGON FILE FORMATS External files describing a (multi)polygon are specified in the config file using the "file_name" and "file_type" properties on the "polygon" or "mul- tipolygon" object: "polygon": { "file_name": "berlin.geojson", "file_type": "geojson" } If file names don't start with a slash (/), they are interpreted relative to the directory where the config file is. If the "file_type" is missing, Osmium will try to autodetect it from the suffix of the "file_name". The following file types are supported: geojson GeoJSON file containing exactly one Feature of type Polygon or Mul- tiPolygon, or a FeatureCollection with the first Feature of type Polygon or MultiPolygon. Everything except the actual geometry (of the first Feature) is ignored. poly A poly file as described in https://wiki.openstreetmap.org/wiki/Os- mosis/Polygon_Filter_File_Format . This wiki page also mentions several sources for such poly files. osm An OSM file containing one or more multipolygon or boundary relation together with all the nodes and ways needed. Any OSM file format (XML, PBF, ...) supported by Osmium can be used here, but the cor- rect suffix must be used, so the file format is detected correctly. Files for this can easily be obtained by searching for the area on OSM and then downloading the full relation using a URL like https://www.openstreetmap.org/api/0.6/relation/RELATION-ID/full . Or you can use osmium getid -r to get a specific relation from an OSM file. Note that both these approaches can get you very detailed boundaries which can take quite a while to cut out. Consider sim- plifying the boundary before use. If there are several (multi)polygons in a poly file or OSM file, they will be merged. The (multi)polygons must not overlap, otherwise the result is undefined. STRATEGIES osmium extract can use different strategies for creating the extracts. De- pending on the strategy different objects will end up in the extracts. The strategies differ in how much memory they need and how often they need to read the input file. The choice of strategy depends on how you want to use the generated extracts and how much memory and time you have. The default strategy is complete_ways. Strategy simple Runs in a single pass. The extract will contain all nodes inside the region and all ways referencing those nodes as well as all rela- tions referencing any nodes or ways already included. Ways crossing the region boundary will not be reference-complete. Relations will not be reference-complete. This strategy is fast, because it reads the input only once, but the result is not enough for most use cases. It is the only strategy that will work when reading from a socket or pipe. This strategy will not work for history files. Strategy complete_ways Runs in two passes. The extract will contain all nodes inside the region and all ways referencing those nodes as well as all nodes referenced by those ways. The extract will also contain all rela- tions referenced by nodes inside the region or ways already included and, recursively, their parent relations. The ways are refer- ence-complete, but the relations are not. Strategy smart Runs in three passes. The extract will contain all nodes inside the region and all ways referencing those nodes as well as all nodes referenced by those ways. The extract will also contain all rela- tions referenced by nodes inside the region or ways already included and, recursively, their parent relations. The extract will also contain all nodes and ways (and the nodes they reference) referenced by relations tagged "type=multipolygon" directly referencing any nodes in the region or ways referencing nodes in the region. The ways are reference-complete, and all multipolygon relations refer- encing nodes in the regions or ways that have nodes in the region are reference-complete. Other relations are not reference-complete. For the complete_ways strategy you can set the option "-S relations=false" in which case no relations will be written to the output file. The smart strategy allows the following strategy options: Use "-S types=TYPE,..." to change the types of relations that should be reference-complete. Instead of just relations tagged "type=multipolygon", you can either get all relations (use "-S types=any") or give a list of types to the -S option: "-S types=multipolygon,route". Note that espe- cially boundary relations can be huge, so if you include them, be aware your result might be huge. Use "-S complete-partial-relations=X" to force completion of partly com- pleted relations. If this is set, all relations that have more than X per- cent of their members already in the extract will have their full set of members in the extract. So this allows completing almost complete rela- tions. It can be useful for instance to make sure a boundary relation is complete even if some of it is outside the polygon used for extraction. Use "-S tags=PATTERN,..." to only complete relations that have a tag match- ing one of the PATTERNs. So for example if you use "-S tags=landuse,nat- ural=wood,natural=water" everything tagged landuse=* or natural=wood or natural=water is added to the result, but no other relations. You can combine the "-S types", "-S complete-partial-relations", and "-S tags" options. The options will be interpreted as "(types OR complete-par- tial-relations) AND tags". DIAGNOSTICS osmium extract exits with exit code 0 if everything went alright, 1 if there was an error processing the data, or 2 if there was a problem with the command line arguments, config file or polygon files. MEMORY USAGE Memory usage of osmium extract depends on the number of extracts and on the strategy used. For the simple strategy it will at least be the number of extracts times the highest node ID used divided by 8. For the com- plete_ways twice that and for the smart strategy a bit more. If you want to split a large file into many extracts, do this in several steps. First create several larger extracts and then split them again and again into smaller pieces. LIMITS You can not have more than 500 extracts. Although chances are that you will be running out of memory long before that. See MEMORY USAGE. EXAMPLES See the example config files in the extract-example-config directory. To try it: osmium extract -v -c extract-example-config/extracts.json \ germany-latest.osm.pbf Extract the city of Karlsruhe using a boundary polygon: osmium extract -p karlsruhe-boundary.osm.bz2 germany-latest.osm.pbf \ -o karlsruhe.osm.pbf Extract the city of Munich using a bounding box: osmium extract -b 11.35,48.05,11.73,48.25 germany-latest.osm.pbf \ -o munich.osm.pbf SEE ALSO * osmium(1), osmium-file-formats(5), osmium-output-headers(5), os- mium-getid(1), osmium-merge(1) * Osmium website COPYRIGHT Copyright (C) 2013-2026 Jochen Topf <jochen@topf.org>. License GPLv3+: GNU GPL version 3 or later <https://gnu.org/li- censes/gpl.html>. This is free software: you are free to change and redis- tribute it. There is NO WARRANTY, to the extent permitted by law. CONTACT If you have any questions or want to report a bug, please go to https://osmcode.org/contact.html AUTHORS Jochen Topf <jochen@topf.org>. 1.19.0 OSMIUM-EXTRACT(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | COMMON OPTIONS | INPUT OPTIONS | OUTPUT OPTIONS | CONFIG FILE | (MULTI)POLYGON FILE FORMATS | STRATEGIES | DIAGNOSTICS | MEMORY USAGE | LIMITS | EXAMPLES | SEE ALSO | COPYRIGHT | CONTACT | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=osmium-extract&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>