Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
vmixctl(7)			   OSS Devices			      vmixctl(7)

NAME
     oss_digi96 - RME Digi96 professional audio driver.

DESCRIPTION
     Audio driver for the RME Digi96 family of profressional audio controllers.

     *	Only 16 and 24/32 bit audio formats are supported.

     *	All  Digi96 family members support 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz
	and 96kHz. sampling rates.

MIXER PANEL
     Note! For recording you need to set digi96.sync to INTERNAL and the  values
     of  digi96.mode  and  digi96.input  to  match  your studio setup. Otherwise
     recordings will fail with I/O error.

     There are several settings that can be changed  using  the  ossmix  program
     shipped with OSS. Note that some features don't work with all Digi96 family
     members. For example ADAT mode is not supported by the base model.

     *	digi96.mode  <SPDIF|AESEBU|ADAT>:  This setting controls the output mode
	which can be S/PDIF (consumer), AES/EBU (professional) or ADAT. The  in-
	put  mode is detected automatically.  If ADAT input is detected the out-
	put mode will be switched to ADAT automatically (this  doesn't	work  in
	the other direction).

     *	digi96.sync <EXTERNAL|INTERNAL>: This setting tells if the playback sam-
	pling  rate  is  based on the internal oscillator or the sample rate de-
	tected in the input port. See also the definition of the digi96.worldclk
	setting.

     *	digi96.input <OPTICAL|COAXIAL|INTERNAL|XLR>: Selects the active input.

     *	digi96.sel <BYPASS|NORMAL>: When set to BYPASS the input signal will  be
	routed	directly  to  the output (also sets digi96.sync automatically to
	EXTERNAL). In this mode audio data written to /dev/dsp will be muted.

     *	digi96.worldclk ON|OFF: Setting this control to ON will enable	the  op-
	tional	worldclock  input  as  the  sample  rate  source  (overrides the
	digi96.sync setting).

     *	digi96.emph ON|OFF: Enables/disables the de-emphasis option on the  ana-
	log (monitor) output connector.

     *	digi96.data  <AUDIO|AC3>: Specifies if the output signal is audio or AC3
	data (sets the non-audio bit in the channel status data).

OPTIONS
     None

FILES
     /usr/local/lib/oss/conf/oss_digi96.conf Device configuration file

AUTHOR
     4Front Technologies

				  30 July 2026			      vmixctl(7)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=oss_digi96&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>

home | help