FreeBSD Manual Pages
QFCC(1) QuakeForge Developer's Manual QFCC(1) NAME qfcc - The QuakeForge Code Compiler SYNOPSIS qfcc [options] [files] DESCRIPTION qfcc compiles Ruamoko source into a form that the QuakeForge engine can un- derstand. OPTIONS qfcc takes the following arguments: --advanced Use advanced Ruamoko features. This is the default when using sepa- rate compilation. -C, --code OPTION,... Set code generation options. See CODE GENERATION OPTIONS for de- tails. -c Only compile, do not link. Can be used in either progs.src or sepa- rate compilation modes. --cpp CPPSPEC cpp execution command line. See CPP NAME for details. -D, --define SYMBOL[=VAL] Define a symbol for the preprocessor, if it is in use. -E Only preprocess. No compilation or linking is done. --extended Allow extended keywords in traditional mode. -F, --files Generate files.dat. This list is created by checking the parameters to the precache_* functions. --frames Generate <source>.frame files. For each source file (listed either on the command line, or in progs.src, write a file whose name is the base name of the source file with an extension of .frame, and con- tains a list of frame macro names with their associated frame num- bers. Eg, player.qc will produce player.framea. Note that files that do not create frame macros will not generate a frame file. At this time, the file is always written to the current directory. -g Generate debugging info. Synonym for --code debug. -h, --help Show summary of options. -I DIR Add DIR to the list of directories for the preprocessor to search when looking for include files. --include FILE Process FILE as if #include "FILE" appeared as the first line of the primary source file. See the cpp man page (-include) for details. -L DIR Add DIR to the search path used for finding libraries specified with -l. -l LIB Add libLIB.a to the list of libraries to be used for resolving unde- fined symbols. qfcc expects libraries to be pak files of qfcc ob- ject files built using the pak utility. -M, -MD, -MMD Generate dependency info. Dependent on cpp version, so check cpp's documentation. --no-default-paths Do not use default paths for include files or libraries. -N, --notice OPTION,... Set notice options. See NOTICE OPTIONS for details. -o, --output-file FILE Specify output file name. In progs.src mode, this overrides the output file in progs.src. --progdefs Generate progdefs.h. Forces --code crc. -P, --progs-src FILE File to use instead of progs.src. No effect in separate compilation mode. --qccx-escapes Use QCCX escape sequences instead of standard C/QuakeForge sequences in strings. See ESCAPE SEQUENCES for details. -p, --strip-path NUM Strip NUM leading path elements from file names. eg. -p 3 will strip the ../../../ from ../../../src/foo.r when embedding the source file name in the output code. -q, --quiet Inhibit some of qfcc's normal output. Specifying this option multi- ple times further inhibits qfcc's output. Counteracts the effects of -v. -r, --relocatable Incremental linking. Generate a larger object file from other ob- ject files and libraries. -S, --save-temps Do not delete temporary files. -s, --source DIR Look for progs.src in DIR instead of the current directory. --traditional Use traditional QuakeC syntax, semantics and "bugs". Also implies the v6only, no-short-circuit and no-local-merging code generation options (see CODE GENERATION OPTIONS). This is the default when us- ing progs.src mode. -U, --undefine SYMBOL Undefine a preprocessor symbol, if the preprocessor is in use. -V, --version Show the version of qfcc. -v, --verbose Display more output than usual. Specifying this option multiple times further increases qfcc's output. Counteracts the effects of -q. -W, --warn OPTION,... Set warning options. See WARNING OPTIONS for details. -z Compress object files when writing them. This is especially useful when creating libraries, especially if using the object oriented features, but can be quite slow. This has no effect when creating progs.dat. CODE GENERATION OPTIONS Code generation options are processed in the order of their appearance on the command line. Unsupported options are ignored. The following options are supported by qfcc's --code argument: cow Allow assignment to initialized globals. In Quake-C and Ruamoko, a global that has been initialized to a value is not a variable, but a named constant. However, qcc never really enforced this. The cow option allows qfcc to gracefully cope with QuakeC source that as- signs values to initialized globals in this manner. (also known as "copy on write"--never mind the bovine connotations) cpp Preprocess all input files with cpp. This includes the progs.src file when used. crc Write the CRC of progdefs.h to "progs.dat". Default for v6 progs, otherwise defaults to off. However, --progdefs has the effect of forcing this option. debug Generate debug code for QuakeForge engines. The QuakeForge engine has the ability to load line number and other debugging information for use in diagnosing progs crashes. This option tells qfcc to gen- erate this information. It is written to a secondary file with the extension "sym"--if your output file is "progs.dat", the symbol file will be "progs.sym". fast-float Use float values directly in "if" statements. Defaults to on. This option is always enabled when using version 6 progs (v6only is in effect). local-merging Clump the local variables from all functions into one block of data the size of the largest group of locals, resulting in large savings of global data space. When off, each function's local variable block is separate from the others, preserving the behaviour of tra- ditional qcc, but using much more global data. This can be a prob- lem because instructions can access addresses up to 32767 in older servers or 65535 in most modern servers. Defaults to off for tradi- tional mode, and on for advanced mode. short-circuit Generate short circuit code for logical operators (&& and ||). For A && B, if A is false, the expression is known to be false and the code for B will not be executed. Similar for A || B, but if A is true, the expression is known to be true and the code for B will not be executed. Defaults to off for traditional mode, and on for ad- vanced mode. single-cpp In progs.src mode, when cpp is used, produce an intermediate file that is a series of #include directives, one for each source file. This file is then passed to cpp and the resulting output is compiled in one go. This results in preprocessor directives in early files affecting later files, as would be expected in progs.src mode. Without this option, each source file is independent with respect to the preprocessor. Has no effect in separate compilation mode. De- faults to on. vector-calls When a function is passed a constant vector, this causes the vector to be passed using three float copy instructions instead of one vec- tor copy instruction. This can save a good number of pr_globals where those vectors contain many duplicate coordinates but do not match entirely. However, this will generate slower code for such calls. vector-components Create extra symbols for accessing the components of a vector vari- able or field. For example, vector vel will also create vel_x, vel_y, and vel_z. Defaults to on for traditional code and off for advanced. v6only Restrict the compiler to only version 6 progs (original Quake/Quake- World) features. This means that the compiled data file should be able to run on older servers, as long as you have not used any QuakeForge-specific built-in functions. Also disables compiler fea- tures (such as integers and string manipulation support) that re- quire extensions. Defaults to on for traditional mode and off for advanced mode. Any of the above can be prefixed with no- to negate its meaning. WARNING OPTIONS Warning options are processed in the order of their appearance on the com- mand line. Unsupported options are ignored. The following options are supported by qfcc's --warn argument: cow Emit a warning when the source assigns a value to a named constant. See the description of the cow code generation option above for a description of what this means. error Promote warnings to errors. executable Emit a warning when non-executable statements (eg, == used for as- signment) are encountered. initializer Emit a warning when too many structure/array initializer elements are given. integer-divide Emit a warning when both constants in a division operation are inte- gers. interface-check Emit a warning when a method is declared in an implementation but not in the interface for a class. precedence Emit a warning when potentially ambiguous logic is used without parentheses. redeclared Emit a warning when a local variable is redeclared. traditional Emit a warning when code that should be an error is allowed by tra- ditional qcc. Has effect only in traditional mode. undef-function Emit a warning when a function is called, but has not yet been de- fined. unimplemented Emit a warning when a class method has not been implemented. unused Emit a warning for unused local variables. uninited-var Emit a warning when a variable is read from that has not been ini- tialized to a value. vararg-integer Emit a warning when a function that takes a variable number of argu- ments is passed a constant of an integer type. Any of the above can be prefixed with no- to negate its meaning. There are also two special options: all Turns on all warning options except error. none Turns off all warning options except error. NOTICE OPTIONS Notices are used to flag code constructs that may have changed semantics but shouldn't be treated as warnings. They are also used for internal de- bugging purposes, so if you see any cryptic notices, please report them as a bug (normal notices should be fairly self-explanatory). none Silences all notice messages. warn Promote notices to warnings. If warnings are being treated as er- rors, so will notices. Disabling warnings has no effect on this op- tion. CPP NAME When preprocessing source files, qfcc calls cpp (the C preprocessor) with a configurable command line. This is useful when you wish to use an alterna- tive preprocessor (though it must be command line compatible with cpp) or when qfcc has been misconfigured to call cpp incorrectly for your operating system. If the latter is the case, please report the details (operating system, detection methods, correct execution specification). The base de- fault execution spec (on most Linux systems) is cpp %d -o %o %i. This spec is similar in concept to a printf string. The name of the program may be either absolute (eg /lib/cpp) or relative as the PATH will be searched. Available substitutions: %d Mainly for defines (-D, -U and -I) but %d will be replaced by all cpp options that qfcc passes to cpp %o This will be replaced by the output file path. Could be either ab- solute or relative, depending on whether qfcc is deleting temporary files or not. %i This will be replaced by the input file path. Generally as given to qfcc. COMPILATION MODES qfcc has two, mutually exclusive, modes of operation: progs.src mode and "separate compilation" mode. progs.src mode This is the traditional method of compiling QuakeC programs. It is se- lected when no file arguments are given to qfcc. Note that the -lLIB op- tion is considered to be a file argument. In this mode, the file progs.src is used to specify the output file name and the input source files. While it is customary to write each file name on a separate line, file names are really just white-space separated strings (use double quotes around files with spaces, though using files with spaces is a gibbing offence). // is used to denote a comment. The comment extends to the end of the current line. The first file name in the file specified the output file name. This may be overridden using the -o option. All subsequent file names specify QuakeC source files. The source files are cumulatively compiled in the order they are listed in progs.src. Cumulatively compiled means that all symbols other than frame macros defined in earlier source files are visible in later source files. Once the all source files have been compiled, the finished program is writ- ten to the output file as a normal progs.dat file. If the -c option is given, instead of a progs.dat file, an object file is written. This object file can then be linked against other object files to produce the progs.dat file. This is useful when mod extensions are in li- brary form and converting the main mod from progs.src style to separate compilation is undesirable. progs.src mode implies --traditional. However, this can be overridden us- ing --advanced. When cpp has not been disabled, progs.src is first passed through cpp. The result is then parsed as above, but unless the no-single-cpp code option has been given, rather than compiling each source file, an intermediate file is generated containing a series of frame macro reset and #include di- rectives, one for each file. This intermediate file is then passed to cpp and the resulting single file containing all of the preprocessed source code is then compiled. "separate compilation" mode This mode is more generally useful. It is particularly well suited to building object libraries for use in other programs. Separate compilation mode is automatically selected when any file arguments (including -lLIB) are given on the command line. Each file argument is processed in the order given. Files ending in .r, .qc, or .c (part of an experimental hack to put qfcc support into automake) are treated as sources and compiled to object file. All other files (in- cluding -lLIB) are passed untouched to the linker unless the -c is given. If -c is given, then object files are ignored and the linking stage will be skipped. Each source file is fully independent of the others. When link- ing (-c has not been given), any generated object files will be deleted un- less -S is on the command line. However, no object file given on the com- mand line will be deleted. When linking, if the -r option is given, instead of the output file being a normal progs file, it will be an object file that can be linked against other object files. While separate compilation mode implies --advanced, this can be overridden using --traditional. When using cpp, each source file is passed through the preprocessor indi- vidually. Each file is truly independent of any other file on the command line. ESCAPE SEQUENCES qfcc supports a variety of string escape sequences. This includes those of qcc (which are a subset of those in standard C), standard C and qccx. There are some conflicts between the escape sequences, but --qccx-escapes selects which set to use. \\ Backslash. \n Line feed. \" Double quote. \' Single quote. \0-7 Octal character code, up to three digits. This conflicts with qccx. In qccx, this produces gold digits. Use --qccx-escapes to select qccx behaviour. \8-9 Produce gold digits. \x0-9A-Fa-f Hexadecimal character code, any number of digits, but only the least significant byte will be used. \a Bell character (not in quake engines). Equivalent to \x07. \b Backspace character (not in quake engines). Equivalent to \x08. This conflicts with qccx. In qccx, this toggles bronze characters. Use --qccx-escapes to select qccx behaviour. \e Escape character (not in quake engines). Equivalent to \x1b (dull 9). \f Formfeed character (not in quake engines). Equivalent to \x0c. \r Carriage return. Equivalent to \x0d. \s Toggle "bold" characters (add 0x80). \t Tab character. Equivalent to \x09. \v Vertical tab. Equivalent to \x0b. \^ Make the next character "bold" (add 0x80). \[ Gold [ character. Equivalent to \x90. \] Gold ] character. Equivalent to \x91. \. Center dot. Equivalent to \x1c. \< Turn on "bold" characters (add 0x80). This conflicts with qccx. In qccx, this produces the brown left end. Equivalent to \x1d. Use --qccx-escapes to select qccx behaviour. \- Brown center bit. Equivalent to \x1e. \> Turn off "bold" characters (add 0x80). This conflicts with qccx. In qccx, this produces the brown right end. Equivalent to \x1f. Use --qccx-escapes to select qccx behaviour. \( Left slider end. Equivalent to \x80. \= Slider center. Equivalent to \x81. \) Right slider end. Equivalent to \x82. \{0-255} Decimal character code. --qccx-escapes has no effect on sequences that do not conflict. TRADITIONAL VS ADVANCED Compared to qcc, qfcc has many advanced features and is much stricter about type checking. qfcc also uses the same operator semantics and precedence rules as standard C. Unfortunately, this means that most older QuakeC code will not compile, or even worse, will compile incorrectly. To address this situation, qfcc has a "traditional" mode for compiling old progs. This mode, enabled with --traditional or by default in progs.src mode, removes the new keywords required by qfcc's advanced features, con- verts new errors to warnings, some warnings to notices and inverts prece- dence order where required (eg, (!var & flag)). Traditional mode also af- fects several code generation options (as always, this can be overridden): * code output is restricted to version 6 progs instructions * short circuit boolean logic is disabled * each function has a private area of data for its local variables (this wastes a lot of data space). Advanced mode is simply qfcc in its natural state. Using --advanced, qfcc can be put in to advanced mode while using the progs.src compilation mode. FAQ Where did the name Ruamoko come from? In Maori mythology, Ruamoko is the youngest child of Ranginui, the Sky-father, and Papatuanuku, the Earth-mother. Ruamoko is the god of volcanoes and earthquakes. For more information, see the Web site at <http://maori.com/kmst1.htm>. qfcc hangs This is almost always caused by qfcc incorrectly invoking cpp. Us- ing the --cpp option (refer to the CPP NAME section above), the cor- rect method for invoking cpp can be specified. Once you have found this, please send the correct cpp command line, preferably along with the output of config.guess, to the team. qfcc is singing a bad 80s rap song to me. What's going on? "ice ice baby" is QuakeForge-speak for "Internal Compiler Error". It usually means there's a bug in qfcc, so please report it to the team. qfcc is mooing at me. What's wrong with you people? The compiler doesn't like being treated like a slab of beef. Seri- ously, the code you are trying to compile is using constants as if they weren't. Normally, qfcc would just stop and tell the code to sit in the corner for a while, but you told it not to do that by passing the cow option to --code, so it has its revenge by mooing out a warning. Or something like that. To disable the warning, pass no-cow to --warn. FILES progs.src SEE ALSO quakeforge(1), pak(1) AUTHORS The original qcc program, for compiling the QuakeC language, was written by Id Software, Inc. The members of the QuakeForge Project have modified it to work with a new, but very similar language called Ruamoko. QuakeForge 28 April, 2004 QFCC(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CODE GENERATION OPTIONS | WARNING OPTIONS | NOTICE OPTIONS | CPP NAME | COMPILATION MODES | ESCAPE SEQUENCES | TRADITIONAL VS ADVANCED | FAQ | FILES | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=qfcc&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>