FreeBSD Manual Pages
RDIST(1) General Commands Manual RDIST(1) NAME rdist - remote file distribution client program SYNOPSIS rdist [ -DFn ] [ -A num ] [ -a num ] [ -d var=value ] [ -l <local logopts> ] [ -L <remote logopts> ] [ -f distfile ] [ -M maxproc ] [ -m host ] [ -o distopts ] [ -t timeout ] [ -p <rdistd-path> ] [ -P <transport-path> ] [ name ... ] rdist -DFn -c name ... [login@]host[:dest] rdist -Server rdist -V DESCRIPTION Rdist is a program to maintain identical copies of files over multiple hosts. It preserves the owner, group, mode, and mtime of files if possible and can update programs that are executing. Rdist reads commands from dis- tfile to direct the updating of files and/or directories. If distfile is `-', the standard input is used. If no -f option is present, the program looks first for `distfile', then `Distfile' to use as the input. If no names are specified on the command line, rdist will update all of the files and directories listed in distfile. Otherwise, the argument is taken to be the name of a file to be updated or the label of a command to execute. If label and file names conflict, it is assumed to be a label. These may be used together to update specific files using specific commands. The -c option forces rdist to interpret the remaining arguments as a small distfile. The equivalent distfile is as follows. ( name ... ) -> [login@]host install [dest] ; The -Server option is recognized to provide partial backward compatible support for older versions of rdist which used this option to put rdist into server mode. If rdist is started with the -Server command line op- tion, it will attempt to exec (run) the old version of rdist. This option will only work if rdist was compiled with the location of the old rdist (usually either /usr/ucb/oldrdist or /usr/old/rdist) and that program is available at run time. Rdist can use either the rcmd(3) function call or run an arbitrary trans- port program such as rsh(1c) to access each target host. The method used is selected at compile-time. However, if the later method is used, the transport program can be specified at run-time on the command line with the default being rsh(1c). If the rsh(1c) method is used and the target host is the string localhost and the remote user name is the same as the local user name, rdist will run the command /bin/sh -c rdistd -S Otherwise rdist run will run the command rsh host -l remuser rdistd -S where host is the name of the target host, remuser is the name of the user to make the connection as and, rdistd is the rdist server command on the target host as shown below. To use a transport program other than rsh(1c) use the -P option. Whatever transport program is used, must be compatible with the above specified syntax for rsh(1c). If the transport program is not, it should be wrapped in a shell script which does understand this com- mand line syntax and which then executes the real transport program. Here's an example which uses ssh(1) as the transport: rdist -P /usr/local/bin/ssh -f myDistfile If the rcmd(3) method is used, then rdist makes the connection to the tar- get host itself and runs the rdistd server program as shown below. The de- fault, and preferred method, is to use rsh(1c) to make the connection to target hosts. This allows rdist to be run without being setuid to ``root''. On each target host Rdist will attempt to run the command rdistd -S or <rdistd path> -S if the -p option was specified. If no -p option is included, or the <rdistd path> is a simple filename, rdistd or <rdistd path> must be some- where in the $PATH of the user running rdist on the remote (target) host. OPTIONS -A num Set the minimum number of free files (inodes) on a filesystem that must exist for rdist to update or install a file. -a num Set the minimum amount of free space (in bytes) on a filesystem that must exist for rdist to update or install a file. -D Enable copious debugging messages. -d var=value Define var to have value. This option is used to define or override variable definitions in the distfile. Value can be the empty string, one name, or a list of names surrounded by parentheses and separated by tabs and/or spaces. -F Do not fork any child rdist processes. All clients are updated se- quentially. -f distfile Set the name of the distfile to use to be distfile . If distfile is specified as ``-'' (dash) then read from standard input (stdin). -l logopts Set local logging options. See the section MESSAGE LOGGING for de- tails on the syntax for logopts. -L logopts Set remote logging options. logopts is the same as for local log- ging except the values are passed to the remote server (rdistd). See the section MESSAGE LOGGING for details on the syntax for lo- gopts. -M num Set the maximum number of simultaneously running child rdist processes to num. The default is 4. -m machine Limit which machines are to be updated. Multiple -m arguments can be given to limit updates to a subset of the hosts listed in the dist- file. -n Print the commands without executing them. This option is useful for debugging distfile. -odistopts Specify the dist options to enable. distopts is a comma separated list of options which are listed below. The valid values for distopts are: chknfs Do not check or update files on target host that reside on NFS filesystems. chkreadonly Enable check on target host to see if a file resides on a read-only filesystem. If a file does, then no checking or updating of the file is attempted. chksym If the target on the remote host is a symbolic link, but is not on the master host, the remote target will be left a sym- bolic link. This behavior is generally considered a bug in the original version of rdist, but is present to allow com- patibility with older versions. compareBinary comparison. Perform a binary comparison and update files if they differ rather than comparing dates and sizes. compress Compress on the fly files greater than 8K. defgroup[=groupname] If a group of a file to be transferred does not exist on the destination host, use that group instead. If groupname is not specified, the group used is bin. defowner[=owner] If a owner of a file to be transferred does not exist on the destination host, use that group instead. If owner is not specified, the owner used is bin. follow Follow symbolic links. Copy the file that the link points to rather than the link itself. followlinks Follow symbolic links on the destination machine. Normally symbolic links on the destination host will be overwritten, rather than followed. historyWhen savetargets and history are both defined then the target file that is updated is first renamed from file to file.NNN where NNN increases for each generation update. The first generation is 001, and the last is 999. After 999 genera- tions, the counter is reset to 001 and 001 will get overwrit- ten all the time. This is not a desired behavior, so some other method needs to be devised to clean up or limit the number of generations. ignlnksIgnore unresolved links. Rdist will normally try to maintain the link structure of files being transferred and warn the user if all the links cannot be found. nochkowner Do not check user ownership of files that already exist. The file ownership is only set when the file is updated. nochkgroup Do not check group ownership of files that already exist. The file ownership is only set when the file is updated. nochkmode Do not check file and directory permission modes. The per- mission mode is only set when the file is updated. nodescend Do not descend into a directory. Normally rdist will recur- sively check directories. If this option is enabled, then any files listed in the file list in the distfile that are directories are not recursively scanned. Only the existence, ownership, and mode of the directory are checked. noexec Automatically exclude executable files that are in a.out(5) format from being checked or updated. numchkgroup Use the numeric group id (gid) to check group ownership in- stead of the group name. numchkowner Use the numeric user id (uid) to check user ownership instead of the user name. quiet Quiet mode. Files that are being modified are normally printed on standard output. This option suppresses this. remove Remove extraneous files. If a directory is being updated, any files that exist on the remote host that do not exist in the master directory are removed. This is useful for maintaining truly identical copies of directories. savetargets Save files that are updated instead of removing them. Any target file that is updated is first renamed from file to file.OLD. sparse Enable checking for sparse (aka wholely) files. One of the most common types of sparse files are those produced by ndbm(3). This option adds some additional processing over- head so it should only be enabled for targets likely to con- tain sparse files. updateperm Do not send the whole file when the size and the modification time match. Just update the ownership, group, and permis- sions if necessary. verify Verify that the files are up to date on all the hosts. Any files that are out of date will be displayed but no files will be changed nor any mail sent. whole Whole mode. The whole file name is appended to the destina- tion directory name. Normally, only the last component of a name is used when renaming files. This will preserve the di- rectory structure of the files being copied instead of flat- tening the directory structure. For example, rdisting a list of files such as /path/dir1/f1 and /path/dir2/f2 to /tmp/dir would create files /tmp/dir/path/dir1/f1 and /tmp/dir/path/dir2/f2 instead of /tmp/dir/dir1/f1 and /tmp/dir/dir2/f2. youngerYounger mode. Files are normally updated if their mtime and size (see stat(2)) disagree. This option causes rdist not to update files that are younger than the master copy. This can be used to prevent newer copies on other hosts from being re- placed. A warning message is printed for files which are newer than the master copy. -p <rdistd-path> Set the path where the rdistd server is searched for on the target host. -P <transport-path> Set the path to the transport command to be used. This is normally rsh(1c) but can be any other program - such as ssh(1) - which under- stands rsh(1c) command line syntax and which provides an appropriate connection to the remote host. The transport-path may be a colon seperated list of possible pathnames. In this case, the first com- ponent of the path to exist is used. i.e. /usr/ucb/rsh:/usr/bin/remsh , /usr/bsd/rsh. -t timeout Set the timeout period (in seconds) for waiting for responses from the remote rdist server. The default is 900 seconds. -V Print version information and exit. MESSAGE LOGGING Rdist uses a collection of predefined message facilities that each contain a list of message types specifying which types of messages to send to that facility. The local client (rdist) and the remote server (rdistd) each maintain their own copy of what types of messages to log to what facili- ties. The -l logopts option to rdist tells rdist what logging options to use lo- cally. The -L logopts option to rdist tells rdist what logging options to pass to the remote rdistd server. The form of logopts should be of form facility=types:facility=types... The valid facility names are: stdout Messages to standard output. file Log to a file. To specify the file name, use the format ``file=filename=types''. e.g. ``file=/tmp/rdist.log=all,de- bug'' . syslog Use the syslogd(8) facility. notify Use the internal rdist notify facility. This facility is used in conjunction with the notify keyword in a distfile to specify what messages are mailed to the notify address. types should be a comma separated list of message types. Each message type specified enables that message level. This is unlike the syslog(3) system facility which uses an ascending order scheme. The following are the valid types: change Things that change. This includes files that are installed or updated in some way. info General information. notice General info about things that change. This includes things like making directories which are needed in order to install a specific target, but which are not explicitly specified in the distfile. nerror Normal errors that are not fatal. ferror Fatal errors. warningWarnings about errors which are not as serious as nerror type messages. verboseMore information than normal, but less than debugging level. debug Debugging information. all All but debug messages. Here is a sample command line option: -l stdout=all:syslog=change,notice:file=/tmp/rdist.log=all This entry will set local message logging to have all but debug messages sent to standard output, change and notice messages will be sent to sys- log(3), and all messages will be written to the file /tmp/rdist.log. DISTFILES The distfile contains a sequence of entries that specify the files to be copied, the destination hosts, and what operations to perform to do the up- dating. Each entry has one of the following formats. <variable name> `=' <name list> [ label: ] <source list> `->' <destination list> <command list> [ label: ] <source list> `::' <time_stamp file> <command list> The first format is used for defining variables. The second format is used for distributing files to other hosts. The third format is used for making lists of files that have been changed since some given date. The source list specifies a list of files and/or directories on the local host which are to be used as the master copy for distribution. The destination list is the list of hosts to which these files are to be copied. Each file in the source list is added to a list of changes if the file is out of date on the host which is being updated (second format) or the file is newer than the time stamp file (third format). Labels are optional. They are used to identify a command for partial up- dates. Newlines, tabs, and blanks are only used as separators and are otherwise ignored. Comments begin with `#' and end with a newline. Variables to be expanded begin with `$' followed by one character or a name enclosed in curly braces (see the examples at the end). The source and destination lists have the following format: <name> or `(' <zero or more names separated by white-space> `)' These simple lists can be modified by using one level of set addition, sub- traction, or intersection like this: list '-' list or list '+' list or list '&' list If additional modifications are needed (e.g., ``all servers and client ma- chines except for the OSF/1 machines'') then the list will have to be ex- plicitly constructed in steps using "temporary" variables. The shell meta-characters `[', `]', `{', `}', `*', and `?' are recognized and expanded (on the local host only) in the same way as csh(1). They can be escaped with a backslash. The `~' character is also expanded in the same way as csh but is expanded separately on the local and destination hosts. When the -owhole option is used with a file name that begins with `~', everything except the home directory is appended to the destination name. File names which do not begin with `/' or `~' use the destination user's home directory as the root directory for the rest of the file name. The command list consists of zero or more commands of the following format. `install' <options> opt_dest_name `;' `notify' <name list> `;' `except' <name list> `;' `except_pat' <pattern list>`;' `special' <name list> string `;' `cmdspecial' <name list> string `;' The install command is used to copy out of date files and/or directories. Each source file is copied to each host in the destination list. Directo- ries are recursively copied in the same way. Opt_dest_name is an optional parameter to rename files. If no install command appears in the command list or the destination name is not specified, the source file name is used. Directories in the path name will be created if they do not exist on the remote host. The -o distopts option as specified above under OPTIONS, has the same semantics as on the command line except they only apply to the files in the source list. The login name used on the destination host is the same as the local host unless the destination name is of the format ``login@host". The notify command is used to mail the list of files updated (and any er- rors that may have occurred) to the listed names. If no `@' appears in the name, the destination host is appended to the name (e.g., name1@host, name2@host, ...). The except command is used to update all of the files in the source list except for the files listed in name list. This is usually used to copy everything in a directory except certain files. The except_pat command is like the except command except that pattern list is a list of regular expressions (see ed(1) for details). If one of the patterns matches some string within a file name, that file will be ignored. Note that since `\' is a quote character, it must be doubled to become part of the regular expression. Variables are expanded in pattern list but not shell file pattern matching characters. To include a `$', it must be es- caped with `\'. The special command is used to specify sh(1) commands that are to be exe- cuted on the remote host after the file in name list is updated or in- stalled. If the name list is omitted then the shell commands will be exe- cuted for every file updated or installed. String starts and ends with `"' and can cross multiple lines in distfile. Multiple commands to the shell should be separated by `;'. Commands are executed in the user's home di- rectory on the host being updated. The special command can be used to re- build private databases, etc. after a program has been updated. The fol- lowing environment variables are set for each special command: FILE The full pathname of the local file that was just updated. REMFILEThe full pathname of the remote file that was just updated. BASEFILE The basename of the remote file that was just updated. The cmdspecial command is similar to the special command, except it is exe- cuted only when the entire command is completed instead of after each file is updated. The list of files is placed in the environment variable $FILES. Each file name in $FILES is separated by a `:' (colon). If a hostname ends in a ``+'' (plus sign), then the plus is stripped off and NFS checks are disabled. This is equivalent to disabling the -ochknfs option just for this one host. The following is a small example. HOSTS = ( matisse root@arpa) FILES = ( /bin /lib /usr/bin /usr/games /usr/include/{*.h,{stand,sys,vax*,pascal,machine}/*.h} /usr/lib /usr/man/man? /usr/ucb /usr/local/rdist ) EXLIB = ( Mail.rc aliases aliases.dir aliases.pag crontab dshrc sendmail.cf sendmail.fc sendmail.hf sendmail.st uucp vfont ) ${FILES} -> ${HOSTS} install -oremove,chknfs ; except /usr/lib/${EXLIB} ; except /usr/games/lib ; special /usr/lib/sendmail "/usr/lib/sendmail -bz" ; srcs: /usr/src/bin -> arpa except_pat ( \\.o\$ /SCCS\$ ) ; IMAGEN = (ips dviimp catdvi) imagen: /usr/local/${IMAGEN} -> arpa install /usr/local/lib ; notify ralph ; ${FILES} :: stamp.cory notify root@cory ; ENVIRONMENT TMPDIR Name of temporary directory to use. Default is /tmp. RDIST_RSH Name of the command to be used to invoke a shell on the remote ma- chine. Default is _PATH_REMSH. /usr/ucb/rsh. RDIST_OPTIONS Take default options from the environment. FILES distfile - input command file $TMPDIR/rdist* - temporary file for update lists SEE ALSO sh(1), csh(1), stat(2), rsh(1c), rcmd(3) DIAGNOSTICS NOTES If the basename of a file (the last component in the pathname) is ".", then rdist assumes the remote (destination) name is a directory. i.e. /tmp/. means that /tmp should be a directory on the remote host. The following options are still recognized for backwards compatibility: -v -N -O -q -b -r -R -s -w -y -h -i -x BUGS Source files must reside on the local host where rdist is executed. Variable expansion only works for name lists; there should be a general macro facility. Rdist aborts on files which have a negative mtime (before Jan 1, 1970). If a hardlinked file is listed more than once in the same target, then rdist will report missing links. Only one instance of a link should be listed in each target. The defowner, defgroup, and updateperm options are extensions to the 6.1.0 protocol and will not work with earlier versions of rdist 6. 4.3 Berkeley Distribution August 5, 2001 RDIST(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | MESSAGE LOGGING | DISTFILES | ENVIRONMENT | FILES | SEE ALSO | DIAGNOSTICS | NOTES | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=rdist&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>