FreeBSD Manual Pages
RICHCOMM_USB(8) NUT Manual RICHCOMM_USB(8) NAME richcomm_usb - Driver UPS equipment using Richcomm dry-contact to USB solution SYNOPSIS richcomm_usb -h richcomm_usb -a UPS_NAME [OPTIONS] Note This man page only documents the specific features of the richcomm_usb driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE The Richcomm dry-contact to USB solution is a generic interface that is used to upgrade an existing (RS-232) contact closure UPS interface to USB. As such, all the limitations of the underlying contact closure interface apply. This means that you will only get the essentials in ups.status: OL, OB, and LB. See also genericups(8). BUGS Most contact-closure UPSes will not power down the load if the line power is present. This can create a race when using secondary upsmon(8) systems. See the upsmon(8) man page for more information. The solution to both of these problems is to upgrade to a smart protocol UPS of some kind that allows detection and proper load cycling on command. AUTHORS • Peter van Valderen <p.v.valderen at probu.nl> • Dirk Teurlings <dirk at upexia.nl> SEE ALSO The core driver: nutupsdrv(8) The generic serial driver: genericups(8) Internet resources: The NUT (Network UPS Tools) home page: https://www.networkupstools.org/ Network UPS Tools 2.8.2. 04/17/2025 RICHCOMM_USB(8)
NAME | SYNOPSIS | SUPPORTED HARDWARE | BUGS | AUTHORS | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=richcomm_usb&sektion=8&manpath=FreeBSD+Ports+14.3.quarterly>