rte_ethdev.h(3) DPDK rte_ethdev.h(3) NAME rte_ethdev.h SYNOPSIS #include <stdint.h> #include <rte_cman.h> #include <rte_compat.h> #include <rte_log.h> #include <rte_interrupts.h> #include <rte_dev.h> #include <rte_devargs.h> #include <rte_bitops.h> #include <rte_errno.h> #include <rte_common.h> #include <rte_config.h> #include <rte_power_intrinsics.h> #include 'rte_ethdev_trace_fp.h' #include 'rte_dev_info.h' #include 'rte_eth_ctrl.h' #include <rte_ethdev_core.h> Data Structures struct rte_eth_stats struct rte_eth_link struct rte_eth_speed_lanes_capa struct rte_eth_thresh struct rte_eth_rxmode struct rte_vlan_filter_conf struct rte_eth_rss_conf struct rte_eth_rss_reta_entry64 struct rte_eth_vmdq_dcb_conf struct rte_eth_vmdq_rx_conf struct rte_eth_txmode struct rte_eth_rxseg_split union rte_eth_rxseg struct rte_eth_rxconf struct rte_eth_txconf struct rte_eth_hairpin_queue_cap struct rte_eth_hairpin_cap struct rte_eth_hairpin_peer struct rte_eth_hairpin_conf struct rte_eth_desc_lim struct rte_eth_fc_conf struct rte_eth_pfc_conf struct rte_eth_pfc_queue_info struct rte_eth_pfc_queue_conf struct rte_eth_udp_tunnel struct rte_eth_intr_conf struct rte_eth_conf struct rte_eth_dev_portconf struct rte_eth_switch_info struct rte_eth_rxseg_capa struct rte_eth_dev_info struct rte_eth_rxq_info struct rte_eth_txq_info struct rte_eth_recycle_rxq_info struct rte_eth_burst_mode struct rte_eth_xstat struct rte_eth_xstat_name struct rte_eth_dcb_tc_queue_mapping struct rte_eth_dcb_info struct rte_eth_dev_tx_buffer struct rte_eth_event_macsec_desc struct rte_eth_event_ipsec_desc struct rte_eth_representor_range struct rte_eth_representor_info struct rte_eth_ip_reassembly_params struct rte_eth_ip_reassembly_dynfield_t struct rte_eth_cman_info struct rte_eth_cman_config Macros #define RTE_ETH_FOREACH_MATCHING_DEV(id, devargs, iter) #define RTE_ETH_SPEED_LANES_TO_CAPA(x) RTE_BIT32(x) #define RTE_ETH_FLOW_PORT 18 #define RTE_ETH_FLOW_VXLAN 19 #define RTE_ETH_FLOW_GENEVE 20 #define RTE_ETH_FLOW_NVGRE 21 #define RTE_ETH_FLOW_VXLAN_GPE 22 #define RTE_ETH_FLOW_GTPU 23 #define RTE_ETH_RSS_L4_CHKSUM RTE_BIT64(35) #define RTE_ETH_RSS_IB_BTH RTE_BIT64(38) #define RTE_ETH_RSS_LEVEL_PMD_DEFAULT (UINT64_C(0) << 50) #define RTE_ETH_RSS_LEVEL_OUTERMOST (UINT64_C(1) << 50) #define RTE_ETH_RSS_LEVEL_INNERMOST (UINT64_C(2) << 50) #define RTE_ETH_RSS_PROTO_MASK #define RTE_ETH_NUM_RECEIVE_MAC_ADDR 128 #define RTE_ETH_VMDQ_NUM_UC_HASH_ARRAY 128 #define RTE_ETH_RX_OFFLOAD_VLAN_STRIP RTE_BIT64(0) #define RTE_ETH_RX_OFFLOAD_TIMESTAMP RTE_BIT64(14) #define RTE_ETH_TX_OFFLOAD_VLAN_INSERT RTE_BIT64(0) #define RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM RTE_BIT64(7) #define RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO RTE_BIT64(9) #define RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO RTE_BIT64(10) #define RTE_ETH_TX_OFFLOAD_IPIP_TNL_TSO RTE_BIT64(11) #define RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO RTE_BIT64(12) #define RTE_ETH_TX_OFFLOAD_MT_LOCKFREE RTE_BIT64(14) #define RTE_ETH_TX_OFFLOAD_MULTI_SEGS RTE_BIT64(15) #define RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE RTE_BIT64(16) #define RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO RTE_BIT64(18) #define RTE_ETH_TX_OFFLOAD_IP_TNL_TSO RTE_BIT64(19) #define RTE_ETH_TX_OFFLOAD_OUTER_UDP_CKSUM RTE_BIT64(20) #define RTE_ETH_TX_OFFLOAD_SEND_ON_TIMESTAMP RTE_BIT64(21) #define RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID (UINT16_MAX) #define RTE_ETH_BURST_FLAG_PER_QUEUE RTE_BIT64(0) #define RTE_ETH_BURST_MODE_INFO_SIZE 1024 #define RTE_ETH_XSTATS_NAME_SIZE 64 #define RTE_ETH_FOREACH_DEV_OWNED_BY(p, o) #define RTE_ETH_FOREACH_DEV(p) RTE_ETH_FOREACH_DEV_OWNED_BY(p, RTE_ETH_DEV_NO_OWNER) #define RTE_ETH_FOREACH_DEV_OF(port_id, parent) #define RTE_ETH_FOREACH_DEV_SIBLING(port_id, ref_port_id) #define RTE_ETH_TX_BUFFER_SIZE(sz) (sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *)) #define RTE_ETH_RX_METADATA_USER_FLAG RTE_BIT64(0) #define RTE_ETH_RX_METADATA_USER_MARK RTE_BIT64(1) #define RTE_ETH_RX_METADATA_TUNNEL_ID RTE_BIT64(2) #define RTE_ETH_DEV_REASSEMBLY_F_IPV4 (RTE_BIT32(0)) #define RTE_ETH_DEV_REASSEMBLY_F_IPV6 (RTE_BIT32(1)) Link speed capabilities Device supported speeds bitmap flags #define RTE_ETH_LINK_SPEED_AUTONEG 0 #define RTE_ETH_LINK_SPEED_FIXED RTE_BIT32(0) #define RTE_ETH_LINK_SPEED_10M_HD RTE_BIT32(1) #define RTE_ETH_LINK_SPEED_10M RTE_BIT32(2) #define RTE_ETH_LINK_SPEED_100M_HD RTE_BIT32(3) #define RTE_ETH_LINK_SPEED_100M RTE_BIT32(4) #define RTE_ETH_LINK_SPEED_1G RTE_BIT32(5) #define RTE_ETH_LINK_SPEED_2_5G RTE_BIT32(6) #define RTE_ETH_LINK_SPEED_5G RTE_BIT32(7) #define RTE_ETH_LINK_SPEED_10G RTE_BIT32(8) #define RTE_ETH_LINK_SPEED_20G RTE_BIT32(9) #define RTE_ETH_LINK_SPEED_25G RTE_BIT32(10) #define RTE_ETH_LINK_SPEED_40G RTE_BIT32(11) #define RTE_ETH_LINK_SPEED_50G RTE_BIT32(12) #define RTE_ETH_LINK_SPEED_56G RTE_BIT32(13) #define RTE_ETH_LINK_SPEED_100G RTE_BIT32(14) #define RTE_ETH_LINK_SPEED_200G RTE_BIT32(15) #define RTE_ETH_LINK_SPEED_400G RTE_BIT32(16) #define RTE_ETH_LINK_SPEED_800G RTE_BIT32(17) Link speed Ethernet numeric link speeds in Mbps #define RTE_ETH_SPEED_NUM_NONE 0 #define RTE_ETH_SPEED_NUM_10M 10 #define RTE_ETH_SPEED_NUM_100M 100 #define RTE_ETH_SPEED_NUM_1G 1000 #define RTE_ETH_SPEED_NUM_2_5G 2500 #define RTE_ETH_SPEED_NUM_5G 5000 #define RTE_ETH_SPEED_NUM_10G 10000 #define RTE_ETH_SPEED_NUM_20G 20000 #define RTE_ETH_SPEED_NUM_25G 25000 #define RTE_ETH_SPEED_NUM_40G 40000 #define RTE_ETH_SPEED_NUM_50G 50000 #define RTE_ETH_SPEED_NUM_56G 56000 #define RTE_ETH_SPEED_NUM_100G 100000 #define RTE_ETH_SPEED_NUM_200G 200000 #define RTE_ETH_SPEED_NUM_400G 400000 #define RTE_ETH_SPEED_NUM_800G 800000 #define RTE_ETH_SPEED_NUM_UNKNOWN UINT32_MAX Link negotiation Constants used in link management. #define RTE_ETH_LINK_HALF_DUPLEX 0 #define RTE_ETH_LINK_FULL_DUPLEX 1 #define RTE_ETH_LINK_DOWN 0 #define RTE_ETH_LINK_UP 1 #define RTE_ETH_LINK_FIXED 0 #define RTE_ETH_LINK_AUTONEG 1 #define RTE_ETH_LINK_MAX_STR_LEN 40 Multi-queue mode See also rte_eth_conf.rxmode.mq_mode. #define RTE_ETH_MQ_RX_RSS_FLAG RTE_BIT32(0) #define RTE_ETH_MQ_RX_DCB_FLAG RTE_BIT32(1) #define RTE_ETH_MQ_RX_VMDQ_FLAG RTE_BIT32(2) VMDq and DCB maximums #define RTE_ETH_VMDQ_MAX_VLAN_FILTERS 64 #define RTE_ETH_DCB_NUM_USER_PRIORITIES 8 #define RTE_ETH_VMDQ_DCB_NUM_QUEUES 128 #define RTE_ETH_DCB_NUM_QUEUES 128 DCB capabilities #define RTE_ETH_DCB_PG_SUPPORT RTE_BIT32(0) #define RTE_ETH_DCB_PFC_SUPPORT RTE_BIT32(1) VLAN offload bits #define RTE_ETH_VLAN_STRIP_OFFLOAD 0x0001 #define RTE_ETH_VLAN_FILTER_OFFLOAD 0x0002 #define RTE_ETH_VLAN_EXTEND_OFFLOAD 0x0004 #define RTE_ETH_QINQ_STRIP_OFFLOAD 0x0008 #define RTE_ETH_VLAN_STRIP_MASK 0x0001 #define RTE_ETH_VLAN_FILTER_MASK 0x0002 #define RTE_ETH_VLAN_EXTEND_MASK 0x0004 #define RTE_ETH_QINQ_STRIP_MASK 0x0008 #define RTE_ETH_VLAN_ID_MAX 0x0FFF VMDq Rx mode See also rte_eth_vmdq_rx_conf.rx_mode #define RTE_ETH_VMDQ_ACCEPT_UNTAG RTE_BIT32(0) #define RTE_ETH_VMDQ_ACCEPT_HASH_MC RTE_BIT32(1) #define RTE_ETH_VMDQ_ACCEPT_HASH_UC RTE_BIT32(2) #define RTE_ETH_VMDQ_ACCEPT_BROADCAST RTE_BIT32(3) #define RTE_ETH_VMDQ_ACCEPT_MULTICAST RTE_BIT32(4) Device capabilities Non-offload capabilities reported in rte_eth_dev_info.dev_capa. #define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP RTE_BIT64(0) #define RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP RTE_BIT64(1) #define RTE_ETH_DEV_CAPA_RXQ_SHARE RTE_BIT64(2) #define RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP RTE_BIT64(3) #define RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP RTE_BIT64(4) Rx/Tx queue states #define RTE_ETH_QUEUE_STATE_STOPPED 0 #define RTE_ETH_QUEUE_STATE_STARTED 1 #define RTE_ETH_QUEUE_STATE_HAIRPIN 2 Device flags Flags internally saved in rte_eth_dev_data.dev_flags and reported in rte_eth_dev_info.dev_flags. #define RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE RTE_BIT32(0) #define RTE_ETH_DEV_INTR_LSC RTE_BIT32(1) #define RTE_ETH_DEV_BONDING_MEMBER RTE_BIT32(2) #define RTE_ETH_DEV_INTR_RMV RTE_BIT32(3) #define RTE_ETH_DEV_REPRESENTOR RTE_BIT32(4) #define RTE_ETH_DEV_NOLIVE_MAC_ADDR RTE_BIT32(5) #define RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS RTE_BIT32(6) Rx hardware descriptor states See also rte_eth_rx_descriptor_status #define RTE_ETH_RX_DESC_AVAIL 0 #define RTE_ETH_RX_DESC_DONE 1 #define RTE_ETH_RX_DESC_UNAVAIL 2 Tx hardware descriptor states See also rte_eth_tx_descriptor_status #define RTE_ETH_TX_DESC_FULL 0 #define RTE_ETH_TX_DESC_DONE 1 #define RTE_ETH_TX_DESC_UNAVAIL 2 Typedefs typedef uint16_t(* rte_rx_callback_fn) (uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts, void *user_param) typedef uint16_t(* rte_tx_callback_fn) (uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param) typedef int(* rte_eth_dev_cb_fn) (uint16_t port_id, enum rte_eth_event_type event, void *cb_arg, void *ret_param) Enumerations enum rte_eth_link_connector { RTE_ETH_LINK_CONNECTOR_NONE = 0, RTE_ETH_LINK_CONNECTOR_TP, RTE_ETH_LINK_CONNECTOR_AUI, RTE_ETH_LINK_CONNECTOR_MII, RTE_ETH_LINK_CONNECTOR_FIBER, RTE_ETH_LINK_CONNECTOR_BNC, RTE_ETH_LINK_CONNECTOR_DAC, RTE_ETH_LINK_CONNECTOR_SGMII, RTE_ETH_LINK_CONNECTOR_QSGMII, RTE_ETH_LINK_CONNECTOR_XFI, RTE_ETH_LINK_CONNECTOR_SFI, RTE_ETH_LINK_CONNECTOR_XLAUI, RTE_ETH_LINK_CONNECTOR_GAUI, RTE_ETH_LINK_CONNECTOR_XAUI, RTE_ETH_LINK_CONNECTOR_CAUI, RTE_ETH_LINK_CONNECTOR_LAUI, RTE_ETH_LINK_CONNECTOR_SFP, RTE_ETH_LINK_CONNECTOR_SFP_PLUS, RTE_ETH_LINK_CONNECTOR_SFP28, RTE_ETH_LINK_CONNECTOR_SFP_DD, RTE_ETH_LINK_CONNECTOR_QSFP, RTE_ETH_LINK_CONNECTOR_QSFP_PLUS, RTE_ETH_LINK_CONNECTOR_QSFP28, RTE_ETH_LINK_CONNECTOR_QSFP56, RTE_ETH_LINK_CONNECTOR_QSFP_DD, RTE_ETH_LINK_CONNECTOR_OTHER = 63 } enum rte_eth_rx_mq_mode { RTE_ETH_MQ_RX_NONE = 0, RTE_ETH_MQ_RX_RSS = RTE_ETH_MQ_RX_RSS_FLAG, RTE_ETH_MQ_RX_DCB = RTE_ETH_MQ_RX_DCB_FLAG, RTE_ETH_MQ_RX_DCB_RSS = RTE_ETH_MQ_RX_RSS_FLAG | RTE_ETH_MQ_RX_DCB_FLAG, RTE_ETH_MQ_RX_VMDQ_ONLY = RTE_ETH_MQ_RX_VMDQ_FLAG, RTE_ETH_MQ_RX_VMDQ_RSS = RTE_ETH_MQ_RX_RSS_FLAG | RTE_ETH_MQ_RX_VMDQ_FLAG, RTE_ETH_MQ_RX_VMDQ_DCB = RTE_ETH_MQ_RX_VMDQ_FLAG | RTE_ETH_MQ_RX_DCB_FLAG, RTE_ETH_MQ_RX_VMDQ_DCB_RSS } enum rte_eth_tx_mq_mode { RTE_ETH_MQ_TX_NONE = 0, RTE_ETH_MQ_TX_DCB, RTE_ETH_MQ_TX_VMDQ_DCB, RTE_ETH_MQ_TX_VMDQ_ONLY } enum rte_vlan_type { } enum rte_eth_hash_function { RTE_ETH_HASH_FUNCTION_DEFAULT = 0, RTE_ETH_HASH_FUNCTION_TOEPLITZ, RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ, RTE_ETH_HASH_FUNCTION_SYMMET- RIC_TOEPLITZ_SORT, RTE_ETH_HASH_FUNCTION_MAX } enum rte_eth_nb_tcs { RTE_ETH_4_TCS = 4, RTE_ETH_8_TCS = 8 } enum rte_eth_nb_pools { RTE_ETH_8_POOLS = 8, RTE_ETH_16_POOLS = 16, RTE_ETH_32_POOLS = 32, RTE_ETH_64_POOLS = 64 } enum rte_eth_fc_mode { RTE_ETH_FC_NONE = 0, RTE_ETH_FC_RX_PAUSE, RTE_ETH_FC_TX_PAUSE, RTE_ETH_FC_FULL } enum rte_eth_tunnel_type enum rte_eth_representor_type { RTE_ETH_REPRESENTOR_NONE, RTE_ETH_REPRESEN- TOR_VF, RTE_ETH_REPRESENTOR_SF, RTE_ETH_REPRESENTOR_PF } enum rte_eth_err_handle_mode { RTE_ETH_ERROR_HANDLE_MODE_NONE, RTE_ETH_ER- ROR_HANDLE_MODE_PASSIVE, RTE_ETH_ERROR_HANDLE_MODE_PROACTIVE } enum rte_eth_fec_mode { RTE_ETH_FEC_NOFEC = 0, RTE_ETH_FEC_AUTO, RTE_ETH_FEC_BASER, RTE_ETH_FEC_RS, RTE_ETH_FEC_LLRS } enum rte_eth_dev_state { RTE_ETH_DEV_UNUSED = 0, RTE_ETH_DEV_ATTACHED, RTE_ETH_DEV_REMOVED } enum rte_eth_event_macsec_subtype { RTE_ETH_SUBEVENT_MACSEC_UNKNOWN, RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_V_EQ1, RTE_ETH_SUBEVENT_MAC- SEC_RX_SECTAG_E_EQ0_C_EQ1, RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_SL_GTE48, RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_ES_EQ1_SC_EQ1, RTE_ETH_SUBEVENT_MAC- SEC_RX_SECTAG_SC_EQ1_SCB_EQ1 } enum rte_eth_event_macsec_type { RTE_ETH_EVENT_MACSEC_UNKNOWN, RTE_ETH_EVENT_MACSEC_SECTAG_VAL_ERR, RTE_ETH_EVENT_MAC- SEC_RX_SA_PN_HARD_EXP, RTE_ETH_EVENT_MACSEC_RX_SA_PN_SOFT_EXP, RTE_ETH_EVENT_MACSEC_TX_SA_PN_HARD_EXP, RTE_ETH_EVENT_MAC- SEC_TX_SA_PN_SOFT_EXP, RTE_ETH_EVENT_MACSEC_SA_NOT_VALID } enum rte_eth_event_ipsec_subtype { RTE_ETH_EVENT_IPSEC_PMD_ERROR_START = -256, RTE_ETH_EVENT_IPSEC_PMD_ERROR_END = -1, RTE_ETH_EVENT_IPSEC_UN- KNOWN = 0, RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW, RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY, RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY, RTE_ETH_EVENT_IPSEC_SA_PKT_EXPIRY, RTE_ETH_EVENT_IPSEC_SA_BYTE_HARD_EX- PIRY, RTE_ETH_EVENT_IPSEC_SA_PKT_HARD_EXPIRY, RTE_ETH_EVENT_IPSEC_MAX } enum rte_eth_event_type { RTE_ETH_EVENT_UNKNOWN, RTE_ETH_EVENT_INTR_LSC, RTE_ETH_EVENT_QUEUE_STATE, RTE_ETH_EVENT_INTR_RESET, RTE_ETH_EVENT_VF_MBOX, RTE_ETH_EVENT_MACSEC, RTE_ETH_EVENT_INTR_RMV, RTE_ETH_EVENT_NEW, RTE_ETH_EVENT_DESTROY, RTE_ETH_EVENT_IPSEC, RTE_ETH_EVENT_FLOW_AGED, RTE_ETH_EVENT_RX_AVAIL_THRESH, RTE_ETH_EVENT_ERR_RECOVERING, RTE_ETH_EVENT_RECOVERY_SUCCESS, RTE_ETH_EVENT_RECOVERY_FAILED, RTE_ETH_EVENT_MAX } enum rte_eth_cman_obj { RTE_ETH_CMAN_OBJ_RX_QUEUE = RTE_BIT32(0), RTE_ETH_CMAN_OBJ_RX_QUEUE_MEMPOOL = RTE_BIT32(1) } Functions int rte_eth_iterator_init (struct rte_dev_iterator *iter, const char *de- vargs) uint16_t rte_eth_iterator_next (struct rte_dev_iterator *iter) void rte_eth_iterator_cleanup (struct rte_dev_iterator *iter) static uint64_t rte_eth_rss_hf_refine (uint64_t rss_hf) uint64_t rte_eth_find_next_owned_by (uint16_t port_id, const uint64_t owner_id) uint16_t rte_eth_find_next (uint16_t port_id) uint16_t rte_eth_find_next_of (uint16_t port_id_start, const struct rte_de- vice *parent) uint16_t rte_eth_find_next_sibling (uint16_t port_id_start, uint16_t ref_port_id) int rte_eth_dev_owner_new (uint64_t *owner_id) int rte_eth_dev_owner_set (const uint16_t port_id, const struct rte_eth_dev_owner *owner) int rte_eth_dev_owner_unset (const uint16_t port_id, const uint64_t owner_id) int rte_eth_dev_owner_delete (const uint64_t owner_id) int rte_eth_dev_owner_get (const uint16_t port_id, struct rte_eth_dev_owner *owner) uint16_t rte_eth_dev_count_avail (void) uint16_t rte_eth_dev_count_total (void) uint32_t rte_eth_speed_bitflag (uint32_t speed, int duplex) const char * rte_eth_dev_rx_offload_name (uint64_t offload) const char * rte_eth_dev_tx_offload_name (uint64_t offload) __rte_experimental const char * rte_eth_dev_capability_name (uint64_t capa- bility) int rte_eth_dev_configure (uint16_t port_id, uint16_t nb_rx_queue, uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf) int rte_eth_dev_is_removed (uint16_t port_id) int rte_eth_rx_queue_setup (uint16_t port_id, uint16_t rx_queue_id, uint16_t nb_rx_desc, unsigned int socket_id, const struct rte_eth_rx- conf *rx_conf, struct rte_mempool *mb_pool) __rte_experimental int rte_eth_rx_hairpin_queue_setup (uint16_t port_id, uint16_t rx_queue_id, uint16_t nb_rx_desc, const struct rte_eth_hair- pin_conf *conf) int rte_eth_tx_queue_setup (uint16_t port_id, uint16_t tx_queue_id, uint16_t nb_tx_desc, unsigned int socket_id, const struct rte_eth_tx- conf *tx_conf) __rte_experimental int rte_eth_tx_hairpin_queue_setup (uint16_t port_id, uint16_t tx_queue_id, uint16_t nb_tx_desc, const struct rte_eth_hair- pin_conf *conf) __rte_experimental int rte_eth_hairpin_get_peer_ports (uint16_t port_id, uint16_t *peer_ports, size_t len, uint32_t direction) __rte_experimental int rte_eth_hairpin_bind (uint16_t tx_port, uint16_t rx_port) __rte_experimental int rte_eth_hairpin_unbind (uint16_t tx_port, uint16_t rx_port) __rte_experimental int rte_eth_dev_count_aggr_ports (uint16_t port_id) __rte_experimental int rte_eth_dev_map_aggr_tx_affinity (uint16_t port_id, uint16_t tx_queue_id, uint8_t affinity) int rte_eth_dev_socket_id (uint16_t port_id) int rte_eth_dev_is_valid_port (uint16_t port_id) __rte_experimental int rte_eth_rx_queue_is_valid (uint16_t port_id, uint16_t queue_id) __rte_experimental int rte_eth_tx_queue_is_valid (uint16_t port_id, uint16_t queue_id) int rte_eth_dev_rx_queue_start (uint16_t port_id, uint16_t rx_queue_id) int rte_eth_dev_rx_queue_stop (uint16_t port_id, uint16_t rx_queue_id) int rte_eth_dev_tx_queue_start (uint16_t port_id, uint16_t tx_queue_id) int rte_eth_dev_tx_queue_stop (uint16_t port_id, uint16_t tx_queue_id) int rte_eth_dev_start (uint16_t port_id) int rte_eth_dev_stop (uint16_t port_id) int rte_eth_dev_set_link_up (uint16_t port_id) int rte_eth_dev_set_link_down (uint16_t port_id) int rte_eth_dev_close (uint16_t port_id) int rte_eth_dev_reset (uint16_t port_id) int rte_eth_promiscuous_enable (uint16_t port_id) int rte_eth_promiscuous_disable (uint16_t port_id) int rte_eth_promiscuous_get (uint16_t port_id) int rte_eth_allmulticast_enable (uint16_t port_id) int rte_eth_allmulticast_disable (uint16_t port_id) int rte_eth_allmulticast_get (uint16_t port_id) int rte_eth_link_get (uint16_t port_id, struct rte_eth_link *link) __rte_warn_unused_result int rte_eth_link_get_nowait (uint16_t port_id, struct rte_eth_link *link) __rte_warn_unused_result __rte_experimental const char * rte_eth_link_speed_to_str (uint32_t link_speed) __rte_experimental const char * rte_eth_link_connector_to_str (enum rte_eth_link_connector link_connector) __rte_experimental int rte_eth_link_to_str (char *str, size_t len, const struct rte_eth_link *eth_link) __rte_experimental int rte_eth_speed_lanes_get (uint16_t port_id, uint32_t *lanes) __rte_experimental int rte_eth_speed_lanes_set (uint16_t port_id, uint32_t speed_lanes) __rte_experimental int rte_eth_speed_lanes_get_capability (uint16_t port_id, struct rte_eth_speed_lanes_capa *speed_lanes_capa, unsigned int num) int rte_eth_stats_get (uint16_t port_id, struct rte_eth_stats *stats) int rte_eth_stats_reset (uint16_t port_id) int rte_eth_xstats_get_names (uint16_t port_id, struct rte_eth_xstat_name *xstats_names, unsigned int size) int rte_eth_xstats_get (uint16_t port_id, struct rte_eth_xstat *xstats, un- signed int n) int rte_eth_xstats_get_names_by_id (uint16_t port_id, struct rte_eth_xs- tat_name *xstats_names, unsigned int size, uint64_t *ids) int rte_eth_xstats_get_by_id (uint16_t port_id, const uint64_t *ids, uint64_t *values, unsigned int size) int rte_eth_xstats_get_id_by_name (uint16_t port_id, const char *xs- tat_name, uint64_t *id) __rte_experimental int rte_eth_xstats_set_counter (uint16_t port_id, uint64_t id, int on_off) __rte_experimental int rte_eth_xstats_query_state (uint16_t port_id, uint64_t id) int rte_eth_xstats_reset (uint16_t port_id) __rte_deprecated int rte_eth_dev_set_tx_queue_stats_mapping (uint16_t port_id, uint16_t tx_queue_id, uint8_t stat_idx) __rte_deprecated int rte_eth_dev_set_rx_queue_stats_mapping (uint16_t port_id, uint16_t rx_queue_id, uint8_t stat_idx) int rte_eth_macaddr_get (uint16_t port_id, struct rte_ether_addr *mac_addr) __rte_experimental int rte_eth_macaddrs_get (uint16_t port_id, struct rte_ether_addr *ma, unsigned int num) int rte_eth_dev_info_get (uint16_t port_id, struct rte_eth_dev_info *dev_info) __rte_warn_unused_result __rte_experimental int rte_eth_dev_conf_get (uint16_t port_id, struct rte_eth_conf *dev_conf) __rte_warn_unused_result int rte_eth_dev_fw_version_get (uint16_t port_id, char *fw_version, size_t fw_size) __rte_warn_unused_result int rte_eth_dev_get_supported_ptypes (uint16_t port_id, uint32_t ptype_mask, uint32_t *ptypes, int num) __rte_warn_unused_result int rte_eth_dev_set_ptypes (uint16_t port_id, uint32_t ptype_mask, uint32_t *set_ptypes, unsigned int num) int rte_eth_dev_get_mtu (uint16_t port_id, uint16_t *mtu) int rte_eth_dev_set_mtu (uint16_t port_id, uint16_t mtu) int rte_eth_dev_vlan_filter (uint16_t port_id, uint16_t vlan_id, int on) int rte_eth_dev_set_vlan_strip_on_queue (uint16_t port_id, uint16_t rx_queue_id, int on) int rte_eth_dev_set_vlan_ether_type (uint16_t port_id, enum rte_vlan_type vlan_type, uint16_t tag_type) int rte_eth_dev_set_vlan_offload (uint16_t port_id, int offload_mask) int rte_eth_dev_get_vlan_offload (uint16_t port_id) int rte_eth_dev_set_vlan_pvid (uint16_t port_id, uint16_t pvid, int on) __rte_experimental int rte_eth_rx_avail_thresh_set (uint16_t port_id, uint16_t queue_id, uint8_t avail_thresh) __rte_experimental int rte_eth_rx_avail_thresh_query (uint16_t port_id, uint16_t *queue_id, uint8_t *avail_thresh) int rte_eth_tx_buffer_init (struct rte_eth_dev_tx_buffer *buffer, uint16_t size) int rte_eth_tx_buffer_set_err_callback (struct rte_eth_dev_tx_buffer *buffer, buffer_tx_error_fn callback, void *userdata) void rte_eth_tx_buffer_drop_callback (struct rte_mbuf **pkts, uint16_t un- sent, void *userdata) void rte_eth_tx_buffer_count_callback (struct rte_mbuf **pkts, uint16_t un- sent, void *userdata) int rte_eth_tx_done_cleanup (uint16_t port_id, uint16_t queue_id, uint32_t free_cnt) int rte_eth_dev_callback_register (uint16_t port_id, enum rte_eth_event_type event, rte_eth_dev_cb_fn cb_fn, void *cb_arg) int rte_eth_dev_callback_unregister (uint16_t port_id, enum rte_eth_event_type event, rte_eth_dev_cb_fn cb_fn, void *cb_arg) int rte_eth_dev_rx_intr_enable (uint16_t port_id, uint16_t queue_id) int rte_eth_dev_rx_intr_disable (uint16_t port_id, uint16_t queue_id) int rte_eth_dev_rx_intr_ctl (uint16_t port_id, int epfd, int op, void *data) int rte_eth_dev_rx_intr_ctl_q (uint16_t port_id, uint16_t queue_id, int epfd, int op, void *data) int rte_eth_dev_rx_intr_ctl_q_get_fd (uint16_t port_id, uint16_t queue_id) int rte_eth_led_on (uint16_t port_id) int rte_eth_led_off (uint16_t port_id) __rte_experimental int rte_eth_fec_get_capability (uint16_t port_id, struct rte_eth_fec_capa *speed_fec_capa, unsigned int num) __rte_experimental int rte_eth_fec_get (uint16_t port_id, uint32_t *fec_capa) __rte_experimental int rte_eth_fec_set (uint16_t port_id, uint32_t fec_capa) int rte_eth_dev_flow_ctrl_get (uint16_t port_id, struct rte_eth_fc_conf *fc_conf) int rte_eth_dev_flow_ctrl_set (uint16_t port_id, struct rte_eth_fc_conf *fc_conf) int rte_eth_dev_priority_flow_ctrl_set (uint16_t port_id, struct rte_eth_pfc_conf *pfc_conf) int rte_eth_dev_mac_addr_add (uint16_t port_id, struct rte_ether_addr *mac_addr, uint32_t pool) __rte_experimental int rte_eth_dev_priority_flow_ctrl_queue_info_get (uint16_t port_id, struct rte_eth_pfc_queue_info *pfc_queue_info) __rte_experimental int rte_eth_dev_priority_flow_ctrl_queue_configure (uint16_t port_id, struct rte_eth_pfc_queue_conf *pfc_queue_conf) int rte_eth_dev_mac_addr_remove (uint16_t port_id, struct rte_ether_addr *mac_addr) int rte_eth_dev_default_mac_addr_set (uint16_t port_id, struct rte_ether_addr *mac_addr) int rte_eth_dev_rss_reta_update (uint16_t port_id, struct rte_eth_rss_reta_entry64 *reta_conf, uint16_t reta_size) int rte_eth_dev_rss_reta_query (uint16_t port_id, struct rte_eth_rss_reta_entry64 *reta_conf, uint16_t reta_size) int rte_eth_dev_uc_hash_table_set (uint16_t port_id, struct rte_ether_addr *addr, uint8_t on) int rte_eth_dev_uc_all_hash_table_set (uint16_t port_id, uint8_t on) int rte_eth_set_queue_rate_limit (uint16_t port_id, uint16_t queue_idx, uint32_t tx_rate) int rte_eth_dev_rss_hash_update (uint16_t port_id, struct rte_eth_rss_conf *rss_conf) int rte_eth_dev_rss_hash_conf_get (uint16_t port_id, struct rte_eth_rss_conf *rss_conf) __rte_experimental const char * rte_eth_dev_rss_algo_name (enum rte_eth_hash_function rss_algo) __rte_experimental int rte_eth_find_rss_algo (const char *name, uint32_t *algo) int rte_eth_dev_udp_tunnel_port_add (uint16_t port_id, struct rte_eth_udp_tunnel *tunnel_udp) int rte_eth_dev_udp_tunnel_port_delete (uint16_t port_id, struct rte_eth_udp_tunnel *tunnel_udp) int rte_eth_dev_get_dcb_info (uint16_t port_id, struct rte_eth_dcb_info *dcb_info) const struct rte_eth_rxtx_callback * rte_eth_add_rx_callback (uint16_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void *user_param) const struct rte_eth_rxtx_callback * rte_eth_add_first_rx_callback (uint16_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void *user_param) const struct rte_eth_rxtx_callback * rte_eth_add_tx_callback (uint16_t port_id, uint16_t queue_id, rte_tx_callback_fn fn, void *user_param) int rte_eth_remove_rx_callback (uint16_t port_id, uint16_t queue_id, const struct rte_eth_rxtx_callback *user_cb) int rte_eth_remove_tx_callback (uint16_t port_id, uint16_t queue_id, const struct rte_eth_rxtx_callback *user_cb) int rte_eth_rx_queue_info_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_rxq_info *qinfo) int rte_eth_tx_queue_info_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_txq_info *qinfo) __rte_experimental int rte_eth_recycle_rx_queue_info_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_recycle_rxq_info *recycle_rxq_info) int rte_eth_rx_burst_mode_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_burst_mode *mode) int rte_eth_tx_burst_mode_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_burst_mode *mode) __rte_experimental int rte_eth_get_monitor_addr (uint16_t port_id, uint16_t queue_id, struct rte_power_monitor_cond *pmc) __rte_experimental int rte_eth_dev_get_reg_info_ext (uint16_t port_id, struct rte_dev_reg_info *info) int rte_eth_dev_get_reg_info (uint16_t port_id, struct rte_dev_reg_info *info) __rte_warn_unused_result int rte_eth_dev_get_eeprom_length (uint16_t port_id) int rte_eth_dev_get_eeprom (uint16_t port_id, struct rte_dev_eeprom_info *info) int rte_eth_dev_set_eeprom (uint16_t port_id, struct rte_dev_eeprom_info *info) __rte_experimental int rte_eth_dev_get_module_info (uint16_t port_id, struct rte_eth_dev_module_info *modinfo) __rte_warn_unused_result __rte_experimental int rte_eth_dev_get_module_eeprom (uint16_t port_id, struct rte_dev_eeprom_info *info) __rte_warn_unused_result int rte_eth_dev_set_mc_addr_list (uint16_t port_id, struct rte_ether_addr *mc_addr_set, uint32_t nb_mc_addr) int rte_eth_timesync_enable (uint16_t port_id) int rte_eth_timesync_disable (uint16_t port_id) int rte_eth_timesync_read_rx_timestamp (uint16_t port_id, struct timespec *timestamp, uint32_t flags) int rte_eth_timesync_read_tx_timestamp (uint16_t port_id, struct timespec *timestamp) int rte_eth_timesync_adjust_time (uint16_t port_id, int64_t delta) __rte_experimental int rte_eth_timesync_adjust_freq (uint16_t port_id, int64_t ppm) int rte_eth_timesync_read_time (uint16_t port_id, struct timespec *time) int rte_eth_timesync_write_time (uint16_t port_id, const struct timespec *time) __rte_experimental int rte_eth_read_clock (uint16_t port_id, uint64_t *clock) int rte_eth_dev_get_port_by_name (const char *name, uint16_t *port_id) int rte_eth_dev_get_name_by_port (uint16_t port_id, char *name) int rte_eth_dev_adjust_nb_rx_tx_desc (uint16_t port_id, uint16_t *nb_rx_desc, uint16_t *nb_tx_desc) int rte_eth_dev_pool_ops_supported (uint16_t port_id, const char *pool) void * rte_eth_dev_get_sec_ctx (uint16_t port_id) __rte_experimental int rte_eth_dev_hairpin_capability_get (uint16_t port_id, struct rte_eth_hairpin_cap *cap) __rte_experimental int rte_eth_representor_info_get (uint16_t port_id, struct rte_eth_representor_info *info) int rte_eth_rx_metadata_negotiate (uint16_t port_id, uint64_t *features) __rte_experimental int rte_eth_ip_reassembly_capability_get (uint16_t port_id, struct rte_eth_ip_reassembly_params *capa) __rte_experimental int rte_eth_ip_reassembly_conf_get (uint16_t port_id, struct rte_eth_ip_reassembly_params *conf) __rte_experimental int rte_eth_ip_reassembly_conf_set (uint16_t port_id, const struct rte_eth_ip_reassembly_params *conf) __rte_experimental int rte_eth_dev_priv_dump (uint16_t port_id, FILE *file) __rte_experimental int rte_eth_rx_descriptor_dump (uint16_t port_id, uint16_t queue_id, uint16_t offset, uint16_t num, FILE *file) __rte_experimental int rte_eth_tx_descriptor_dump (uint16_t port_id, uint16_t queue_id, uint16_t offset, uint16_t num, FILE *file) __rte_experimental int rte_eth_cman_info_get (uint16_t port_id, struct rte_eth_cman_info *info) __rte_experimental int rte_eth_cman_config_init (uint16_t port_id, struct rte_eth_cman_config *config) __rte_experimental int rte_eth_cman_config_set (uint16_t port_id, const struct rte_eth_cman_config *config) __rte_experimental int rte_eth_cman_config_get (uint16_t port_id, struct rte_eth_cman_config *config) static uint16_t rte_eth_rx_burst (uint16_t port_id, uint16_t queue_id, struct rte_mbuf **rx_pkts, const uint16_t nb_pkts) static int rte_eth_rx_queue_count (uint16_t port_id, uint16_t queue_id) static int rte_eth_rx_descriptor_status (uint16_t port_id, uint16_t queue_id, uint16_t offset) static int rte_eth_tx_descriptor_status (uint16_t port_id, uint16_t queue_id, uint16_t offset) static uint16_t rte_eth_tx_burst (uint16_t port_id, uint16_t queue_id, struct rte_mbuf **tx_pkts, uint16_t nb_pkts) static uint16_t rte_eth_tx_prepare (uint16_t port_id, uint16_t queue_id, struct rte_mbuf **tx_pkts, uint16_t nb_pkts) static uint16_t rte_eth_tx_buffer_flush (uint16_t port_id, uint16_t queue_id, struct rte_eth_dev_tx_buffer *buffer) static __rte_always_inline uint16_t rte_eth_tx_buffer (uint16_t port_id, uint16_t queue_id, struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt) static __rte_experimental uint16_t rte_eth_recycle_mbufs (uint16_t rx_port_id, uint16_t rx_queue_id, uint16_t tx_port_id, uint16_t tx_queue_id, struct rte_eth_recycle_rxq_info *recycle_rxq_info) __rte_experimental int rte_eth_buffer_split_get_supported_hdr_ptypes (uint16_t port_id, uint32_t *ptypes, int num) __rte_warn_unused_result static __rte_experimental int rte_eth_tx_queue_count (uint16_t port_id, uint16_t queue_id) Detailed Description RTE Ethernet Device API The Ethernet Device API is composed of two parts: * The application-oriented Ethernet API that includes functions to setup an Ethernet device (configure it, setup its Rx and Tx queues and start it), to get its MAC address, the speed and the status of its physical link, to receive and to transmit packets, and so on. * The driver-oriented Ethernet API that exports functions allowing an Eth- ernet Poll Mode Driver (PMD) to allocate an Ethernet device instance, create memzone for HW rings and process registered callbacks, and so on. PMDs should include ethdev_driver.h instead of this header. By default, all the functions of the Ethernet Device API exported by a PMD are lock-free functions which assume to not be invoked in parallel on dif- ferent logical cores to work on the same target object. For instance, the receive function of a PMD cannot be invoked in parallel on two logical cores to poll the same Rx queue [of the same port]. Of course, this func- tion can be invoked in parallel by different logical cores on different Rx queues. It is the responsibility of the upper level application to enforce this rule. If needed, parallel accesses by multiple logical cores to shared queues shall be explicitly protected by dedicated inline lock-aware functions built on top of their corresponding lock-free functions of the PMD API. In all functions of the Ethernet API, the Ethernet device is designated by an integer >= 0 named the device port identifier. At the Ethernet driver level, Ethernet devices are represented by a generic data structure of type rte_eth_dev. Ethernet devices are dynamically registered during the PCI probing phase performed at EAL initialization time. When an Ethernet device is being probed, an rte_eth_dev structure and a new port identifier are allocated for that device. Then, the eth_dev_init() function supplied by the Ethernet driver matching the probed PCI device is invoked to properly initialize the device. The role of the device init function consists of resetting the hardware, checking access to Non-volatile Memory (NVM), reading the MAC address from NVM etc. If the device init operation is successful, the correspondence between the port identifier assigned to the new device and its associated rte_eth_dev structure is effectively registered. Otherwise, both the rte_eth_dev struc- ture and the port identifier are freed. The functions exported by the application Ethernet API to setup a device designated by its port identifier must be invoked in the following order: * rte_eth_dev_configure() * rte_eth_tx_queue_setup() * rte_eth_rx_queue_setup() * rte_eth_dev_start() Then, the network application can invoke, in any order, the functions ex- ported by the Ethernet API to get the MAC address of a given device, to get the speed and the status of a device physical link, to receive/transmit [burst of] packets, and so on. If the application wants to change the configuration (i.e. call rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the device and then do the reconfiguration before calling rte_eth_dev_start() again. The transmit and receive functions should not be invoked when the device or the queue is stopped. Please note that some configuration is not stored between calls to rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will be retained: - MTU - flow control settings - receive mode configuration (promiscuous mode, all-multicast mode, hardware checksum mode, RSS/VMDq settings etc.) - VLAN filtering configuration - default MAC address - MAC addresses supplied to MAC address array - flow director filtering mode (but not filtering rules) - NIC queue statistics mappings The following configuration may be retained or not depending on the device capabilities: - flow rules - flow-related shared objects, e.g. indirect actions Any other configuration will not be stored and will need to be re-entered before a call to rte_eth_dev_start(). Finally, a network application can close an Ethernet device by invoking the rte_eth_dev_close() function. Each function of the application Ethernet API invokes a specific function of the PMD that controls the target device designated by its port identi- fier. For this purpose, all device-specific functions of an Ethernet driver are supplied through a set of pointers contained in a generic structure of type eth_dev_ops. The address of the eth_dev_ops structure is stored in the rte_eth_dev structure by the device init function of the Ethernet driver, which is invoked during the PCI probing phase, as explained earlier. In other words, each function of the Ethernet API simply retrieves the rte_eth_dev structure associated with the device port identifier and per- forms an indirect invocation of the corresponding driver function supplied in the eth_dev_ops structure of the rte_eth_dev structure. For performance reasons, the address of the burst-oriented Rx and Tx func- tions of the Ethernet driver are not contained in the eth_dev_ops struc- ture. Instead, they are directly stored at the beginning of the rte_eth_dev structure to avoid an extra indirect memory access during their invocation. RTE Ethernet device drivers do not use interrupts for transmitting or re- ceiving. Instead, Ethernet drivers export Poll-Mode receive and transmit functions to applications. Both receive and transmit functions are packet- burst oriented to minimize their cost per packet through the following op- timizations: * Sharing among multiple packets the incompressible cost of the invocation of receive/transmit functions. * Enabling receive/transmit functions to take advantage of burst-oriented hardware features (L1 cache, prefetch instructions, NIC head/tail regis- ters) to minimize the number of CPU cycles per packet, for instance, by avoiding useless read memory accesses to ring descriptors, or by system- atically using arrays of pointers that exactly fit L1 cache line bound- aries and sizes. The burst-oriented receive function does not provide any error notifica- tion, to avoid the corresponding overhead. As a hint, the upper-level ap- plication might check the status of the device link once being systemati- cally returned a 0 value by the receive function of the driver for a given number of tries. Definition in file rte_ethdev.h. Macro Definition Documentation #define RTE_ETH_FOREACH_MATCHING_DEV(id, devargs, iter) Value:.PP for (rte_eth_iterator_init(iter, devargs), \ id = rte_eth_iterator_next(iter); \ id != RTE_MAX_ETHPORTS; \ id = rte_eth_iterator_next(iter)) Macro to iterate over all ethdev ports matching some devargs. If a break is done before the end of the loop, the function rte_eth_itera- tor_cleanup() must be called. Parameters id Iterated port ID of type uint16_t. devargs Device parameters input as string of type char*. iter Iterator handle of type struct rte_dev_iterator, used internally. Definition at line 247 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_AUTONEG 0 Autonegotiate (all speeds) Definition at line 280 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_FIXED RTE_BIT32(0) Disable autoneg (fixed speed) Definition at line 281 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_10M_HD RTE_BIT32(1) 10 Mbps half-duplex Definition at line 282 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_10M RTE_BIT32(2) 10 Mbps full-duplex Definition at line 283 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_100M_HD RTE_BIT32(3) 100 Mbps half-duplex Definition at line 284 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_100M RTE_BIT32(4) 100 Mbps full-duplex Definition at line 285 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_1G RTE_BIT32(5) 1 Gbps Definition at line 286 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_2_5G RTE_BIT32(6) 2.5 Gbps Definition at line 287 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_5G RTE_BIT32(7) 5 Gbps Definition at line 288 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_10G RTE_BIT32(8) 10 Gbps Definition at line 289 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_20G RTE_BIT32(9) 20 Gbps Definition at line 290 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_25G RTE_BIT32(10) 25 Gbps Definition at line 291 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_40G RTE_BIT32(11) 40 Gbps Definition at line 292 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_50G RTE_BIT32(12) 50 Gbps Definition at line 293 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_56G RTE_BIT32(13) 56 Gbps Definition at line 294 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_100G RTE_BIT32(14) 100 Gbps Definition at line 295 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_200G RTE_BIT32(15) 200 Gbps Definition at line 296 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_400G RTE_BIT32(16) 400 Gbps Definition at line 297 of file rte_ethdev.h. #define RTE_ETH_LINK_SPEED_800G RTE_BIT32(17) 800 Gbps Definition at line 298 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_NONE 0 Not defined Definition at line 304 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_10M 10 10 Mbps Definition at line 305 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_100M 100 100 Mbps Definition at line 306 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_1G 1000 1 Gbps Definition at line 307 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_2_5G 2500 2.5 Gbps Definition at line 308 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_5G 5000 5 Gbps Definition at line 309 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_10G 10000 10 Gbps Definition at line 310 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_20G 20000 20 Gbps Definition at line 311 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_25G 25000 25 Gbps Definition at line 312 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_40G 40000 40 Gbps Definition at line 313 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_50G 50000 50 Gbps Definition at line 314 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_56G 56000 56 Gbps Definition at line 315 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_100G 100000 100 Gbps Definition at line 316 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_200G 200000 200 Gbps Definition at line 317 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_400G 400000 400 Gbps Definition at line 318 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_800G 800000 800 Gbps Definition at line 319 of file rte_ethdev.h. #define RTE_ETH_SPEED_NUM_UNKNOWN UINT32_MAX Unknown Definition at line 320 of file rte_ethdev.h. #define RTE_ETH_LINK_HALF_DUPLEX 0 Half-duplex connection (see link_duplex). Definition at line 379 of file rte_ethdev.h. #define RTE_ETH_LINK_FULL_DUPLEX 1 Full-duplex connection (see link_duplex). Definition at line 380 of file rte_ethdev.h. #define RTE_ETH_LINK_DOWN 0 Link is down (see link_status). Definition at line 381 of file rte_ethdev.h. #define RTE_ETH_LINK_UP 1 Link is up (see link_status). Definition at line 382 of file rte_ethdev.h. #define RTE_ETH_LINK_FIXED 0 No autonegotiation (see link_autoneg). Definition at line 383 of file rte_ethdev.h. #define RTE_ETH_LINK_AUTONEG 1 Autonegotiated (see link_autoneg). Definition at line 384 of file rte_ethdev.h. #define RTE_ETH_LINK_MAX_STR_LEN 40 Max length of default link string. Definition at line 385 of file rte_ethdev.h. #define RTE_ETH_SPEED_LANES_TO_CAPA(x) RTE_BIT32(x) Translate from link speed lanes to speed lanes capabilities. Definition at line 389 of file rte_ethdev.h. #define RTE_ETH_MQ_RX_RSS_FLAG RTE_BIT32(0) Enable RSS. See also rte_eth_rss_conf Definition at line 410 of file rte_ethdev.h. #define RTE_ETH_MQ_RX_DCB_FLAG RTE_BIT32(1) Enable DCB. Definition at line 411 of file rte_ethdev.h. #define RTE_ETH_MQ_RX_VMDQ_FLAG RTE_BIT32(2) Enable VMDq. Definition at line 412 of file rte_ethdev.h. #define RTE_ETH_FLOW_PORT 18 Consider device port number as a flow differentiator Definition at line 572 of file rte_ethdev.h. #define RTE_ETH_FLOW_VXLAN 19 VXLAN protocol based flow Definition at line 573 of file rte_ethdev.h. #define RTE_ETH_FLOW_GENEVE 20 GENEVE protocol based flow Definition at line 574 of file rte_ethdev.h. #define RTE_ETH_FLOW_NVGRE 21 NVGRE protocol based flow Definition at line 575 of file rte_ethdev.h. #define RTE_ETH_FLOW_VXLAN_GPE 22 VXLAN-GPE protocol based flow Definition at line 576 of file rte_ethdev.h. #define RTE_ETH_FLOW_GTPU 23 GTPU protocol based flow Definition at line 577 of file rte_ethdev.h. #define RTE_ETH_RSS_L4_CHKSUM RTE_BIT64(35) The RTE_ETH_RSS_L4_CHKSUM works on checksum field of any L4 header. It is similar to RTE_ETH_RSS_PORT that they don't specify the specific type of L4 header. This macro is defined to replace some specific L4 (TCP/UDP/SCTP) checksum type for constructing the use of RSS offload bits. Due to above reason, some old APIs (and configuration) don't support RTE_ETH_RSS_L4_CHKSUM. The rte_flow RSS API supports it. For the case that checksum is not used in an UDP header, it takes the re- served value 0 as input for the hash function. Definition at line 629 of file rte_ethdev.h. #define RTE_ETH_RSS_IB_BTH RTE_BIT64(38) RSS with RoCE InfiniBand BTH (Base Transport Header) Definition at line 635 of file rte_ethdev.h. #define RTE_ETH_RSS_LEVEL_PMD_DEFAULT (UINT64_C(0) << 50) level 0, requests the default behavior. Depending on the packet type, it can mean outermost, innermost, anything in between or even no RSS. It basi- cally stands for the innermost encapsulation level RSS can be performed on according to PMD and device capabilities. Definition at line 679 of file rte_ethdev.h. #define RTE_ETH_RSS_LEVEL_OUTERMOST (UINT64_C(1) << 50) level 1, requests RSS to be performed on the outermost packet encapsulation level. Definition at line 685 of file rte_ethdev.h. #define RTE_ETH_RSS_LEVEL_INNERMOST (UINT64_C(2) << 50) level 2, requests RSS to be performed on the specified inner packet encap- sulation level, from outermost to innermost (lower to higher values). Definition at line 691 of file rte_ethdev.h. #define RTE_ETH_RSS_PROTO_MASK Value:.PP ( \ RTE_ETH_RSS_IPV4 | \ RTE_ETH_RSS_FRAG_IPV4 | \ RTE_ETH_RSS_NONFRAG_IPV4_TCP | \ RTE_ETH_RSS_NONFRAG_IPV4_UDP | \ RTE_ETH_RSS_NONFRAG_IPV4_SCTP | \ RTE_ETH_RSS_NONFRAG_IPV4_OTHER | \ RTE_ETH_RSS_IPV6 | \ RTE_ETH_RSS_FRAG_IPV6 | \ RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ RTE_ETH_RSS_NONFRAG_IPV6_OTHER | \ RTE_ETH_RSS_L2_PAYLOAD | \ RTE_ETH_RSS_IPV6_EX | \ RTE_ETH_RSS_IPV6_TCP_EX | \ RTE_ETH_RSS_IPV6_UDP_EX | \ RTE_ETH_RSS_PORT | \ RTE_ETH_RSS_VXLAN | \ RTE_ETH_RSS_GENEVE | \ RTE_ETH_RSS_NVGRE | \ RTE_ETH_RSS_MPLS) Mask of valid RSS hash protocols Definition at line 847 of file rte_ethdev.h. #define RTE_ETH_VMDQ_MAX_VLAN_FILTERS 64 Maximum nb. of VMDq VLAN filters. Definition at line 882 of file rte_ethdev.h. #define RTE_ETH_DCB_NUM_USER_PRIORITIES 8 Maximum nb. of DCB priorities. Definition at line 883 of file rte_ethdev.h. #define RTE_ETH_VMDQ_DCB_NUM_QUEUES 128 Maximum nb. of VMDq DCB queues. Definition at line 884 of file rte_ethdev.h. #define RTE_ETH_DCB_NUM_QUEUES 128 Maximum nb. of DCB queues. Definition at line 885 of file rte_ethdev.h. #define RTE_ETH_DCB_PG_SUPPORT RTE_BIT32(0) Priority Group(ETS) support. Definition at line 889 of file rte_ethdev.h. #define RTE_ETH_DCB_PFC_SUPPORT RTE_BIT32(1) Priority Flow Control support. Definition at line 890 of file rte_ethdev.h. #define RTE_ETH_VLAN_STRIP_OFFLOAD 0x0001 VLAN Strip On/Off Definition at line 894 of file rte_ethdev.h. #define RTE_ETH_VLAN_FILTER_OFFLOAD 0x0002 VLAN Filter On/Off Definition at line 895 of file rte_ethdev.h. #define RTE_ETH_VLAN_EXTEND_OFFLOAD 0x0004 VLAN Extend On/Off Definition at line 896 of file rte_ethdev.h. #define RTE_ETH_QINQ_STRIP_OFFLOAD 0x0008 QINQ Strip On/Off Definition at line 897 of file rte_ethdev.h. #define RTE_ETH_VLAN_STRIP_MASK 0x0001 VLAN Strip setting mask Definition at line 899 of file rte_ethdev.h. #define RTE_ETH_VLAN_FILTER_MASK 0x0002 VLAN Filter setting mask Definition at line 900 of file rte_ethdev.h. #define RTE_ETH_VLAN_EXTEND_MASK 0x0004 VLAN Extend setting mask Definition at line 901 of file rte_ethdev.h. #define RTE_ETH_QINQ_STRIP_MASK 0x0008 QINQ Strip setting mask Definition at line 902 of file rte_ethdev.h. #define RTE_ETH_VLAN_ID_MAX 0x0FFF VLAN ID is in lower 12 bits Definition at line 903 of file rte_ethdev.h. #define RTE_ETH_NUM_RECEIVE_MAC_ADDR 128 Maximum nb. of receive mac addr. Definition at line 907 of file rte_ethdev.h. #define RTE_ETH_VMDQ_NUM_UC_HASH_ARRAY 128 Maximum nb. of UC hash array. Definition at line 910 of file rte_ethdev.h. #define RTE_ETH_VMDQ_ACCEPT_UNTAG RTE_BIT32(0) Accept untagged packets. Definition at line 916 of file rte_ethdev.h. #define RTE_ETH_VMDQ_ACCEPT_HASH_MC RTE_BIT32(1) Accept packets in multicast table. Definition at line 918 of file rte_ethdev.h. #define RTE_ETH_VMDQ_ACCEPT_HASH_UC RTE_BIT32(2) Accept packets in unicast table. Definition at line 920 of file rte_ethdev.h. #define RTE_ETH_VMDQ_ACCEPT_BROADCAST RTE_BIT32(3) Accept broadcast packets. Definition at line 922 of file rte_ethdev.h. #define RTE_ETH_VMDQ_ACCEPT_MULTICAST RTE_BIT32(4) Multicast promiscuous. Definition at line 924 of file rte_ethdev.h. #define RTE_ETH_RX_OFFLOAD_VLAN_STRIP RTE_BIT64(0) Rx offload capabilities of a device. Definition at line 1583 of file rte_ethdev.h. #define RTE_ETH_RX_OFFLOAD_TIMESTAMP RTE_BIT64(14) Timestamp is set by the driver in RTE_MBUF_DYNFIELD_TIMESTAMP_NAME and RTE_MBUF_DYNFLAG_RX_TIMESTAMP_NAME is set in ol_flags. The mbuf field and flag are registered when the offload is configured. Definition at line 1599 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_VLAN_INSERT RTE_BIT64(0) Tx offload capabilities of a device. Definition at line 1623 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM RTE_BIT64(7) Used for tunneling packet. Definition at line 1630 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO RTE_BIT64(9) Used for tunneling packet. Definition at line 1632 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO RTE_BIT64(10) Used for tunneling packet. Definition at line 1633 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_IPIP_TNL_TSO RTE_BIT64(11) Used for tunneling packet. Definition at line 1634 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO RTE_BIT64(12) Used for tunneling packet. Definition at line 1635 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_MT_LOCKFREE RTE_BIT64(14) Multiple threads can invoke rte_eth_tx_burst() concurrently on the same Tx queue without SW lock. Definition at line 1641 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_MULTI_SEGS RTE_BIT64(15) Device supports multi segment send. Definition at line 1643 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE RTE_BIT64(16) Device supports optimization for fast release of mbufs. When set applica- tion must guarantee that per-queue all mbufs come from the same mempool, are direct, have refcnt=1, next=NULL and nb_segs=1, as done by rte_pktm- buf_prefree_seg(). See also rte_mbuf_raw_free_bulk() Definition at line 1651 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO RTE_BIT64(18) Device supports generic UDP tunneled packet TSO. Application must set RTE_MBUF_F_TX_TUNNEL_UDP and other mbuf fields required for tunnel TSO. Definition at line 1658 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_IP_TNL_TSO RTE_BIT64(19) Device supports generic IP tunneled packet TSO. Application must set RTE_MBUF_F_TX_TUNNEL_IP and other mbuf fields required for tunnel TSO. Definition at line 1664 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_OUTER_UDP_CKSUM RTE_BIT64(20) Device supports outer UDP checksum Definition at line 1666 of file rte_ethdev.h. #define RTE_ETH_TX_OFFLOAD_SEND_ON_TIMESTAMP RTE_BIT64(21) Device sends on time read from RTE_MBUF_DYNFIELD_TIMESTAMP_NAME if RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME is set in ol_flags. The mbuf field and flag are registered when the offload is configured. Definition at line 1672 of file rte_ethdev.h. #define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP RTE_BIT64(0) Device supports Rx queue setup after device started. Definition at line 1682 of file rte_ethdev.h. #define RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP RTE_BIT64(1) Device supports Tx queue setup after device started. Definition at line 1684 of file rte_ethdev.h. #define RTE_ETH_DEV_CAPA_RXQ_SHARE RTE_BIT64(2) Device supports shared Rx queue among ports within Rx domain and switch do- main. Mbufs are consumed by shared Rx queue instead of each queue. Multiple groups are supported by share_group of Rx queue configuration. Shared Rx queue is identified by PMD using share_qid of Rx queue configuration. Polling any port in the group receive packets of all member ports, source port identified by mbuf->port field. Definition at line 1694 of file rte_ethdev.h. #define RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP RTE_BIT64(3) Device supports keeping flow rules across restart. Definition at line 1696 of file rte_ethdev.h. #define RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP RTE_BIT64(4) Device supports keeping shared flow objects across restart. Definition at line 1698 of file rte_ethdev.h. #define RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID (UINT16_MAX) Default values for switch domain ID when ethdev does not support switch do- main definitions. Definition at line 1726 of file rte_ethdev.h. #define RTE_ETH_QUEUE_STATE_STOPPED 0 Queue stopped. Definition at line 1885 of file rte_ethdev.h. #define RTE_ETH_QUEUE_STATE_STARTED 1 Queue started. Definition at line 1886 of file rte_ethdev.h. #define RTE_ETH_QUEUE_STATE_HAIRPIN 2 Queue used for hairpin. Definition at line 1887 of file rte_ethdev.h. #define RTE_ETH_BURST_FLAG_PER_QUEUE RTE_BIT64(0) If the queues have different burst mode description, this bit will be set by PMD, then the application can iterate to retrieve burst description for all other queues. Definition at line 1951 of file rte_ethdev.h. #define RTE_ETH_BURST_MODE_INFO_SIZE 1024 Maximum size for information Definition at line 1960 of file rte_ethdev.h. #define RTE_ETH_XSTATS_NAME_SIZE 64 Maximum name length for extended statistics counters Definition at line 1965 of file rte_ethdev.h. #define RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE RTE_BIT32(0) PMD supports thread-safe flow operations Definition at line 2157 of file rte_ethdev.h. #define RTE_ETH_DEV_INTR_LSC RTE_BIT32(1) Device supports link state interrupt Definition at line 2159 of file rte_ethdev.h. #define RTE_ETH_DEV_BONDING_MEMBER RTE_BIT32(2) Device is a bonding member Definition at line 2161 of file rte_ethdev.h. #define RTE_ETH_DEV_INTR_RMV RTE_BIT32(3) Device supports device removal interrupt Definition at line 2163 of file rte_ethdev.h. #define RTE_ETH_DEV_REPRESENTOR RTE_BIT32(4) Device is port representor Definition at line 2165 of file rte_ethdev.h. #define RTE_ETH_DEV_NOLIVE_MAC_ADDR RTE_BIT32(5) Device does not support MAC change after started Definition at line 2167 of file rte_ethdev.h. #define RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS RTE_BIT32(6) Queue xstats filled automatically by ethdev layer. PMDs filling the queue xstats themselves should not set this flag Definition at line 2172 of file rte_ethdev.h. #define RTE_ETH_FOREACH_DEV_OWNED_BY(p, o) Value:.PP for (p = rte_eth_find_next_owned_by(0, o); \ (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \ p = rte_eth_find_next_owned_by(p + 1, o)) Macro to iterate over all enabled ethdev ports owned by a specific owner. Definition at line 2192 of file rte_ethdev.h. #define RTE_ETH_FOREACH_DEV(p) RTE_ETH_FOREACH_DEV_OWNED_BY(p, RTE_ETH_DEV_NO_OWNER) Macro to iterate over all enabled and ownerless ethdev ports. Definition at line 2210 of file rte_ethdev.h. #define RTE_ETH_FOREACH_DEV_OF(port_id, parent) Value:.PP for (port_id = rte_eth_find_next_of(0, parent); \ port_id < RTE_MAX_ETHPORTS; \ port_id = rte_eth_find_next_of(port_id + 1, parent)) Macro to iterate over all ethdev ports of a specified device. Parameters port_id The ID of the matching port being iterated. parent The rte_device pointer matching the iterated ports. Definition at line 2236 of file rte_ethdev.h. #define RTE_ETH_FOREACH_DEV_SIBLING(port_id, ref_port_id) Value:.PP for (port_id = rte_eth_find_next_sibling(0, ref_port_id); \ port_id < RTE_MAX_ETHPORTS; \ port_id = rte_eth_find_next_sibling(port_id + 1, ref_port_id)) Macro to iterate over all ethdev ports sharing the same rte_device as the specified port. Note: the specified reference port is part of the loop it- erations. Parameters port_id The ID of the matching port being iterated. ref_port_id The ID of the port being compared. Definition at line 2265 of file rte_ethdev.h. #define RTE_ETH_TX_BUFFER_SIZE(sz) (sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *)) Calculate the size of the Tx buffer. Parameters sz Number of stored packets. Definition at line 3931 of file rte_ethdev.h. #define RTE_ETH_RX_METADATA_USER_FLAG RTE_BIT64(0) The NIC is able to deliver flag (if set) with packets to the PMD. Definition at line 5809 of file rte_ethdev.h. #define RTE_ETH_RX_METADATA_USER_MARK RTE_BIT64(1) The NIC is able to deliver mark ID with packets to the PMD. Definition at line 5812 of file rte_ethdev.h. #define RTE_ETH_RX_METADATA_TUNNEL_ID RTE_BIT64(2) The NIC is able to deliver tunnel ID with packets to the PMD. Definition at line 5815 of file rte_ethdev.h. #define RTE_ETH_DEV_REASSEMBLY_F_IPV4 (RTE_BIT32(0)) Flag to offload IP reassembly for IPv4 packets. Definition at line 5859 of file rte_ethdev.h. #define RTE_ETH_DEV_REASSEMBLY_F_IPV6 (RTE_BIT32(1)) Flag to offload IP reassembly for IPv6 packets. Definition at line 5861 of file rte_ethdev.h. #define RTE_ETH_RX_DESC_AVAIL 0 Desc available for hw. Definition at line 6457 of file rte_ethdev.h. #define RTE_ETH_RX_DESC_DONE 1 Desc done, filled by hw. Definition at line 6458 of file rte_ethdev.h. #define RTE_ETH_RX_DESC_UNAVAIL 2 Desc used by driver or hw. Definition at line 6459 of file rte_ethdev.h. #define RTE_ETH_TX_DESC_FULL 0 Desc filled for hw, waiting xmit. Definition at line 6527 of file rte_ethdev.h. #define RTE_ETH_TX_DESC_DONE 1 Desc done, packet is transmitted. Definition at line 6528 of file rte_ethdev.h. #define RTE_ETH_TX_DESC_UNAVAIL 2 Desc used by driver or hw. Definition at line 6529 of file rte_ethdev.h. Typedef Documentation typedef uint16_t(* rte_rx_callback_fn) (uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts, void *user_param) Function type used for Rx packet processing packet callbacks. The callback function is called on Rx with a burst of packets that have been received on the given port and queue. Parameters port_id The Ethernet port on which Rx is being performed. queue The queue on the Ethernet port which is being used to receive the packets. pkts The burst of packets that have just been received. nb_pkts The number of packets in the burst pointed to by 'pkts'. max_pkts The max number of packets that can be stored in the 'pkts' ar- ray. user_param The arbitrary user parameter passed in by the application when the callback was originally configured. Returns The number of packets returned to the user. Definition at line 2094 of file rte_ethdev.h. typedef uint16_t(* rte_tx_callback_fn) (uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param) Function type used for Tx packet processing packet callbacks. The callback function is called on Tx with a burst of packets immediately before the packets are put onto the hardware queue for transmission. Parameters port_id The Ethernet port on which Tx is being performed. queue The queue on the Ethernet port which is being used to transmit the packets. pkts The burst of packets that are about to be transmitted. nb_pkts The number of packets in the burst pointed to by 'pkts'. user_param The arbitrary user parameter passed in by the application when the callback was originally configured. Returns The number of packets to be written to the NIC. Definition at line 2118 of file rte_ethdev.h. typedef int(* rte_eth_dev_cb_fn) (uint16_t port_id, enum rte_eth_event_type event, void *cb_arg, void *ret_param) User application callback to be registered for interrupts. Note: there is no guarantee in the DPDK drivers that a callback won't be called in the middle of other parts of the ethdev API. For example, imagine that thread A calls rte_eth_dev_start() and as part of this call, a RTE_ETH_EVENT_INTR_RESET event gets generated and the associated callback is ran on thread A. In that example, if the application protects its inter- nal data using locks before calling rte_eth_dev_start(), and the callback takes a same lock, a deadlock occurs. Because of this, it is highly recom- mended NOT to take locks in those callbacks. Definition at line 4295 of file rte_ethdev.h. Enumeration Type Documentation enum rte_eth_link_connector Ethernet port link connector type. Enumerator RTE_ETH_LINK_CONNECTOR_NONE None. Default unless driver specifies it RTE_ETH_LINK_CONNECTOR_TP Twisted Pair RTE_ETH_LINK_CONNECTOR_AUI Attachment Unit Interface RTE_ETH_LINK_CONNECTOR_MII Media Independent Interface RTE_ETH_LINK_CONNECTOR_FIBER Optical Fiber Link RTE_ETH_LINK_CONNECTOR_BNC BNC Link type for RF connection RTE_ETH_LINK_CONNECTOR_DAC Direct Attach copper RTE_ETH_LINK_CONNECTOR_SGMII Serial Gigabit Media Independent Interface RTE_ETH_LINK_CONNECTOR_QSGMII Link to multiplex 4 SGMII over one serial link RTE_ETH_LINK_CONNECTOR_XFI 10 Gigabit Attachment Unit Interface RTE_ETH_LINK_CONNECTOR_SFI 10 Gigabit Serial Interface for optical network RTE_ETH_LINK_CONNECTOR_XLAUI 40 Gigabit Attachment Unit Interface RTE_ETH_LINK_CONNECTOR_GAUI Gigabit Interface for 50/100/200 Gbps RTE_ETH_LINK_CONNECTOR_XAUI 10 Gigabit Attachment Unit Interface RTE_ETH_LINK_CONNECTOR_CAUI 100 Gigabit Attachment Unit Interface RTE_ETH_LINK_CONNECTOR_LAUI 50 Gigabit Attachment Unit Interface RTE_ETH_LINK_CONNECTOR_SFP Pluggable module for 1 Gigabit RTE_ETH_LINK_CONNECTOR_SFP_PLUS Pluggable module for 10 Gigabit RTE_ETH_LINK_CONNECTOR_SFP28 Pluggable module for 25 Gigabit RTE_ETH_LINK_CONNECTOR_SFP_DD Pluggable module for 100 Gigabit RTE_ETH_LINK_CONNECTOR_QSFP Module to mutiplex 4 SFP i.e. 4*1=4 Gbps RTE_ETH_LINK_CONNECTOR_QSFP_PLUS Module to mutiplex 4 SFP_PLUS i.e. 4*10=40 Gbps RTE_ETH_LINK_CONNECTOR_QSFP28 Module to mutiplex 4 SFP28 i.e. 4*25=100 Gbps RTE_ETH_LINK_CONNECTOR_QSFP56 Module to mutiplex 4 SFP56 i.e. 4*50=200 Gbps RTE_ETH_LINK_CONNECTOR_QSFP_DD Module to mutiplex 4 SFP_DD i.e. 4*100=400 Gbps RTE_ETH_LINK_CONNECTOR_OTHER non-physical interfaces like virtio, ring etc. It also includes un- known connector types, i.e. physical connectors not yet defined in this list of connector types. Definition at line 326 of file rte_ethdev.h. enum rte_eth_rx_mq_mode A set of values to identify what method is to be used to route packets to multiple queues. Enumerator RTE_ETH_MQ_RX_NONE None of DCB, RSS or VMDq mode RTE_ETH_MQ_RX_RSS For Rx side, only RSS is on RTE_ETH_MQ_RX_DCB For Rx side,only DCB is on. RTE_ETH_MQ_RX_DCB_RSS Both DCB and RSS enable RTE_ETH_MQ_RX_VMDQ_ONLY Only VMDq, no RSS nor DCB RTE_ETH_MQ_RX_VMDQ_RSS RSS mode with VMDq RTE_ETH_MQ_RX_VMDQ_DCB Use VMDq+DCB to route traffic to queues RTE_ETH_MQ_RX_VMDQ_DCB_RSS Enable both VMDq and DCB in VMDq Definition at line 419 of file rte_ethdev.h. enum rte_eth_tx_mq_mode A set of values to identify what method is to be used to transmit packets using multi-TCs. Enumerator RTE_ETH_MQ_TX_NONE It is in neither DCB nor VT mode. RTE_ETH_MQ_TX_DCB For Tx side,only DCB is on. RTE_ETH_MQ_TX_VMDQ_DCB For Tx side,both DCB and VT is on. RTE_ETH_MQ_TX_VMDQ_ONLY Only VT on, no DCB Definition at line 445 of file rte_ethdev.h. enum rte_vlan_type VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN. Note that single VLAN is treated the same as inner VLAN. Enumerator RTE_ETH_VLAN_TYPE_INNER Inner VLAN. RTE_ETH_VLAN_TYPE_OUTER Single VLAN, or outer VLAN. Definition at line 476 of file rte_ethdev.h. enum rte_eth_hash_function Hash function types. Enumerator RTE_ETH_HASH_FUNCTION_DEFAULT DEFAULT means driver decides which hash algorithm to pick. RTE_ETH_HASH_FUNCTION_TOEPLITZ Toeplitz RTE_ETH_HASH_FUNCTION_SIMPLE_XOR Simple XOR RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ Symmetric Toeplitz: src, dst will be replaced by xor(src, dst). For the case with src/dst only, src or dst address will xor with zero pair. RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ_SORT Symmetric Toeplitz: L3 and L4 fields are sorted prior to the hash function. If src_ip > dst_ip, swap src_ip and dst_ip. If src_port > dst_port, swap src_port and dst_port. Definition at line 494 of file rte_ethdev.h. enum rte_eth_nb_tcs This enum indicates the possible number of traffic classes in DCB configu- rations Enumerator RTE_ETH_4_TCS 4 TCs with DCB. RTE_ETH_8_TCS 8 TCs with DCB. Definition at line 944 of file rte_ethdev.h. enum rte_eth_nb_pools This enum indicates the possible number of queue pools in VMDq configura- tions. Enumerator RTE_ETH_8_POOLS 8 VMDq pools. RTE_ETH_16_POOLS 16 VMDq pools. RTE_ETH_32_POOLS 32 VMDq pools. RTE_ETH_64_POOLS 64 VMDq pools. Definition at line 953 of file rte_ethdev.h. enum rte_eth_fc_mode This enum indicates the flow control mode Enumerator RTE_ETH_FC_NONE Disable flow control. RTE_ETH_FC_RX_PAUSE Rx pause frame, enable flowctrl on Tx side. RTE_ETH_FC_TX_PAUSE Tx pause frame, enable flowctrl on Rx side. RTE_ETH_FC_FULL Enable flow control on both side. Definition at line 1396 of file rte_ethdev.h. enum rte_eth_tunnel_type Tunnel type for device-specific classifier configuration. See also rte_eth_udp_tunnel Definition at line 1485 of file rte_ethdev.h. enum rte_eth_representor_type Ethernet device information Ethernet device representor port type. Enumerator RTE_ETH_REPRESENTOR_NONE not a representor. RTE_ETH_REPRESENTOR_VF representor of Virtual Function. RTE_ETH_REPRESENTOR_SF representor of Sub Function. RTE_ETH_REPRESENTOR_PF representor of Physical Function. Definition at line 1772 of file rte_ethdev.h. enum rte_eth_err_handle_mode Warning EXPERIMENTAL: this enumeration may change without prior notice. Ethernet device error handling mode. Enumerator RTE_ETH_ERROR_HANDLE_MODE_NONE No error handling modes are supported. RTE_ETH_ERROR_HANDLE_MODE_PASSIVE Passive error handling, after the PMD detects that a reset is re- quired, the PMD reports See also RTE_ETH_EVENT_INTR_RESET event, and the application invokes rte_eth_dev_reset to recover the port. RTE_ETH_ERROR_HANDLE_MODE_PROACTIVE Proactive error handling, after the PMD detects that a reset is re- quired, the PMD reports See also RTE_ETH_EVENT_ERR_RECOVERING event, do recovery internally, and finally reports the recovery result event ( RTE_ETH_EVENT_RECOVERY_*). Definition at line 1785 of file rte_ethdev.h. enum rte_eth_fec_mode This enum indicates the possible Forward Error Correction (FEC) modes of an ethdev port. Enumerator RTE_ETH_FEC_NOFEC FEC is off RTE_ETH_FEC_AUTO FEC autonegotiation modes RTE_ETH_FEC_BASER FEC using common algorithm RTE_ETH_FEC_RS FEC using RS algorithm RTE_ETH_FEC_LLRS FEC using LLRS algorithm Definition at line 2035 of file rte_ethdev.h. enum rte_eth_dev_state Possible states of an ethdev port. Enumerator RTE_ETH_DEV_UNUSED Device is unused before being probed. RTE_ETH_DEV_ATTACHED Device is attached when allocated in probing. RTE_ETH_DEV_REMOVED Device is in removed state when plug-out is detected. Definition at line 2124 of file rte_ethdev.h. enum rte_eth_event_macsec_subtype Subtypes for MACsec offload event (RTE_ETH_EVENT_MACSEC) raised by Ethernet device. Enumerator RTE_ETH_SUBEVENT_MACSEC_UNKNOWN Notifies unknown MACsec subevent. RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_V_EQ1 Subevent of RTE_ETH_EVENT_MACSEC_SECTAG_VAL_ERR sectag validation events Validation check: SecTag.TCI.V = 1 RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_E_EQ0_C_EQ1 Subevent of RTE_ETH_EVENT_MACSEC_SECTAG_VAL_ERR sectag validation events Validation check: SecTag.TCI.E = 0 && SecTag.TCI.C = 1 RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_SL_GTE48 Subevent of RTE_ETH_EVENT_MACSEC_SECTAG_VAL_ERR sectag validation events Validation check: SecTag.SL >= 'd48 RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_ES_EQ1_SC_EQ1 Subevent of RTE_ETH_EVENT_MACSEC_SECTAG_VAL_ERR sectag validation events Validation check: SecTag.TCI.ES = 1 && SecTag.TCI.SC = 1 RTE_ETH_SUBEVENT_MACSEC_RX_SECTAG_SC_EQ1_SCB_EQ1 Subevent of RTE_ETH_EVENT_MACSEC_SECTAG_VAL_ERR sectag validation events Validation check: SecTag.TCI.SC = 1 && SecTag.TCI.SCB = 1 Definition at line 4060 of file rte_ethdev.h. enum rte_eth_event_macsec_type Event types for MACsec offload event (RTE_ETH_EVENT_MACSEC) raised by eth device. Enumerator RTE_ETH_EVENT_MACSEC_UNKNOWN Notifies unknown MACsec event. RTE_ETH_EVENT_MACSEC_SECTAG_VAL_ERR Notifies Sectag validation failure events. RTE_ETH_EVENT_MACSEC_RX_SA_PN_HARD_EXP Notifies Rx SA hard expiry events. RTE_ETH_EVENT_MACSEC_RX_SA_PN_SOFT_EXP Notifies Rx SA soft expiry events. RTE_ETH_EVENT_MACSEC_TX_SA_PN_HARD_EXP Notifies Tx SA hard expiry events. RTE_ETH_EVENT_MACSEC_TX_SA_PN_SOFT_EXP Notifies Tx SA soft events. RTE_ETH_EVENT_MACSEC_SA_NOT_VALID Notifies Invalid SA event. Definition at line 4094 of file rte_ethdev.h. enum rte_eth_event_ipsec_subtype Subtypes for IPsec offload event(RTE_ETH_EVENT_IPSEC) raised by eth device. Enumerator RTE_ETH_EVENT_IPSEC_PMD_ERROR_START PMD specific error start RTE_ETH_EVENT_IPSEC_PMD_ERROR_END PMD specific error end RTE_ETH_EVENT_IPSEC_UNKNOWN Unknown event type RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW Sequence number overflow RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY Soft time expiry of SA RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY Soft byte expiry of SA determined by rte_security_ipsec_life- time::bytes_soft_limit RTE_ETH_EVENT_IPSEC_SA_PKT_EXPIRY Soft packet expiry of SA determined by rte_security_ipsec_life- time::packets_soft_limit RTE_ETH_EVENT_IPSEC_SA_BYTE_HARD_EXPIRY Hard byte expiry of SA determined by rte_security_ipsec_life- time::bytes_hard_limit RTE_ETH_EVENT_IPSEC_SA_PKT_HARD_EXPIRY Hard packet expiry of SA determined by rte_security_ipsec_life- time::packets_hard_limit RTE_ETH_EVENT_IPSEC_MAX Max value of this enum Definition at line 4136 of file rte_ethdev.h. enum rte_eth_event_type The eth device event type for interrupt, and maybe others in the future. Enumerator RTE_ETH_EVENT_UNKNOWN unknown event type RTE_ETH_EVENT_INTR_LSC lsc interrupt event RTE_ETH_EVENT_QUEUE_STATE queue state event (enabled/disabled) RTE_ETH_EVENT_INTR_RESET reset interrupt event, sent to VF on PF reset RTE_ETH_EVENT_VF_MBOX message from the VF received by PF RTE_ETH_EVENT_MACSEC MACsec offload related event RTE_ETH_EVENT_INTR_RMV device removal event RTE_ETH_EVENT_NEW The port is being probed, i.e. allocated and not yet available. It is too early to check validity, query infos, and configure the port. But some functions, like rte_eth_dev_socket_id() and rte_eth_dev_owner_*() are available to the application. RTE_ETH_EVENT_DESTROY port is released RTE_ETH_EVENT_IPSEC IPsec offload related event RTE_ETH_EVENT_FLOW_AGED New aged-out flows is detected RTE_ETH_EVENT_RX_AVAIL_THRESH Number of available Rx descriptors is smaller than the threshold. See also rte_eth_rx_avail_thresh_set() RTE_ETH_EVENT_ERR_RECOVERING Port recovering from a hardware or firmware error. If PMD supports proactive error recovery, it should trigger this event to notify ap- plication that it detected an error and the recovery is being started. Upon receiving the event, the application should not invoke any control path API (such as rte_eth_dev_config- ure/rte_eth_dev_stop...) until receiving RTE_ETH_EVENT_RECOVERY_SUC- CESS or RTE_ETH_EVENT_RECOVERY_FAILED event. The PMD will set the data path pointers to dummy functions, and re-set the data path pointers to non-dummy functions before reporting RTE_ETH_EVENT_RE- COVERY_SUCCESS event. It means that the application cannot send or receive any packets during this period. Note Before the PMD reports the recovery result, the PMD may report the RTE_ETH_EVENT_ERR_RECOVERING event again, because a larger error may occur during the recovery. RTE_ETH_EVENT_RECOVERY_SUCCESS Port recovers successfully from the error. The PMD already re-con- figured the port, and the effect is the same as a restart operation. a) The following operation will be retained: (alphabetically) * DCB configuration * FEC configuration * Flow control configuration * LRO configuration * LSC configuration * MTU * MAC address (default and those supplied by MAC address array) * Promiscuous and allmulticast mode * PTP configuration * Queue (Rx/Tx) settings * Queue statistics mappings * RSS configuration by rte_eth_dev_rss_xxx() family * Rx checksum configuration * Rx interrupt settings * Traffic management configuration * VLAN configuration (including filtering, tpid, strip, pvid) * VMDq configuration b) The following configuration maybe retained or not depending on the device capabilities: * flow rules ( See also RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP) * shared flow objects ( See also RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP) c) Any other configuration will not be stored and will need to be re-configured. RTE_ETH_EVENT_RECOVERY_FAILED Port recovery failed. It means that the port should not be usable anymore. The application should close the port. RTE_ETH_EVENT_MAX max value of this enum Definition at line 4201 of file rte_ethdev.h. enum rte_eth_cman_obj Enumerate list of ethdev congestion management objects Enumerator RTE_ETH_CMAN_OBJ_RX_QUEUE Congestion management based on Rx queue depth RTE_ETH_CMAN_OBJ_RX_QUEUE_MEMPOOL Congestion management based on mempool depth associated with Rx queue See also rte_eth_rx_queue_setup() Definition at line 6063 of file rte_ethdev.h. Function Documentation int rte_eth_iterator_init (struct rte_dev_iterator * iter, const char * de- vargs) Initializes a device iterator. This iterator allows accessing a list of devices matching some devargs. Parameters iter Device iterator handle initialized by the function. The fields bus_str and cls_str might be dynamically allocated, and could be freed by calling rte_eth_iterator_cleanup(). devargs Device description string. Returns 0 on successful initialization, negative otherwise. uint16_t rte_eth_iterator_next (struct rte_dev_iterator * iter) Iterates on devices with devargs filter. The ownership is not checked. The next port ID is returned, and the iterator is updated. Parameters iter Device iterator handle initialized by rte_eth_iterator_init(). Some fields bus_str and cls_str might be freed when no more port is found, by calling rte_eth_iterator_cleanup(). Returns A port ID if found, RTE_MAX_ETHPORTS otherwise. void rte_eth_iterator_cleanup (struct rte_dev_iterator * iter) Free some allocated fields of the iterator. This function is automatically called by rte_eth_iterator_next() on the last iteration (i.e. when no more matching port is found). It is safe to call this function twice; it will do nothing more. Parameters iter Device iterator handle initialized by rte_eth_iterator_init(). The fields bus_str and cls_str are freed if needed. static uint64_t rte_eth_rss_hf_refine (uint64_t rss_hf) [inline], [static] For input set change of hash filter, if SRC_ONLY and DST_ONLY of the same level are used simultaneously, it is the same case as none of them are added. Parameters rss_hf RSS types with SRC/DST_ONLY. Returns RSS types. Definition at line 707 of file rte_ethdev.h. uint64_t rte_eth_find_next_owned_by (uint16_t port_id, const uint64_t owner_id) Iterates over valid ethdev ports owned by a specific owner. Parameters port_id The ID of the next possible valid owned port. owner_id The owner identifier. RTE_ETH_DEV_NO_OWNER means iterate over all valid ownerless ports. Returns Next valid port ID owned by owner_id, RTE_MAX_ETHPORTS if there is none. uint16_t rte_eth_find_next (uint16_t port_id) Iterates over valid ethdev ports. Parameters port_id The ID of the next possible valid port. Returns Next valid port ID, RTE_MAX_ETHPORTS if there is none. uint16_t rte_eth_find_next_of (uint16_t port_id_start, const struct rte_de- vice * parent) Iterates over ethdev ports of a specified device. Parameters port_id_start The ID of the next possible valid port. parent The generic device behind the ports to iterate. Returns Next port ID of the device, possibly port_id_start, RTE_MAX_ETHPORTS if there is none. uint16_t rte_eth_find_next_sibling (uint16_t port_id_start, uint16_t ref_port_id) Iterates over sibling ethdev ports (i.e. sharing the same rte_device). Parameters port_id_start The ID of the next possible valid sibling port. ref_port_id The ID of a reference port to compare rte_device with. Returns Next sibling port ID, possibly port_id_start or ref_port_id itself, RTE_MAX_ETHPORTS if there is none. int rte_eth_dev_owner_new (uint64_t * owner_id) Get a new unique owner identifier. An owner identifier is used to owns Eth- ernet devices by only one DPDK entity to avoid multiple management of de- vice by different entities. Parameters owner_id Owner identifier pointer. Returns Negative errno value on error, 0 on success. int rte_eth_dev_owner_set (const uint16_t port_id, const struct rte_eth_dev_owner * owner) Set an Ethernet device owner. Parameters port_id The identifier of the port to own. owner The owner pointer. Returns Negative errno value on error, 0 on success. int rte_eth_dev_owner_unset (const uint16_t port_id, const uint64_t owner_id) Unset Ethernet device owner to make the device ownerless. Parameters port_id The identifier of port to make ownerless. owner_id The owner identifier. Returns 0 on success, negative errno value on error. int rte_eth_dev_owner_delete (const uint64_t owner_id) Remove owner from all Ethernet devices owned by a specific owner. Parameters owner_id The owner identifier. Returns 0 on success, negative errno value on error. int rte_eth_dev_owner_get (const uint16_t port_id, struct rte_eth_dev_owner * owner) Get the owner of an Ethernet device. Parameters port_id The port identifier. owner The owner structure pointer to fill. Returns 0 on success, negative errno value on error.. uint16_t rte_eth_dev_count_avail (void) Get the number of ports which are usable for the application. These devices must be iterated by using the macro RTE_ETH_FOREACH_DEV or RTE_ETH_FOREACH_DEV_OWNED_BY to deal with non-contiguous ranges of devices. Returns The count of available Ethernet devices. uint16_t rte_eth_dev_count_total (void) Get the total number of ports which are allocated. Some devices may not be available for the application. Returns The total count of Ethernet devices. uint32_t rte_eth_speed_bitflag (uint32_t speed, int duplex) Convert a numerical speed in Mbps to a bitmap flag that can be used in the bitmap link_speeds of the struct rte_eth_conf Parameters speed Numerical speed value in Mbps duplex RTE_ETH_LINK_[HALF/FULL]_DUPLEX (only for 10/100M speeds) Returns 0 if the speed cannot be mapped const char * rte_eth_dev_rx_offload_name (uint64_t offload) Get RTE_ETH_RX_OFFLOAD_* flag name. Parameters offload Offload flag. Returns Offload name or 'UNKNOWN' if the flag cannot be recognised. const char * rte_eth_dev_tx_offload_name (uint64_t offload) Get RTE_ETH_TX_OFFLOAD_* flag name. Parameters offload Offload flag. Returns Offload name or 'UNKNOWN' if the flag cannot be recognised. __rte_experimental const char * rte_eth_dev_capability_name (uint64_t capa- bility) Warning EXPERIMENTAL: this API may change without prior notice. Get RTE_ETH_DEV_CAPA_* flag name. Parameters capability Capability flag. Returns Capability name or 'UNKNOWN' if the flag cannot be recognized. int rte_eth_dev_configure (uint16_t port_id, uint16_t nb_rx_queue, uint16_t nb_tx_queue, const struct rte_eth_conf * eth_conf) Configure an Ethernet device. This function must be invoked first before any other function in the Ethernet API. This function can also be re-in- voked when a device is in the stopped state. Parameters port_id The port identifier of the Ethernet device to configure. nb_rx_queue The number of receive queues to set up for the Ethernet de- vice. nb_tx_queue The number of transmit queues to set up for the Ethernet device. eth_conf The pointer to the configuration data to be used for the Eth- ernet device. The rte_eth_conf structure includes: * the hardware offload features to activate, with dedicated fields for each statically configurable offload hardware feature provided by Ethernet devices, such as IP checksum or VLAN tag stripping for exam- ple. The Rx offload bitfield API is obsolete and will be deprecated. Applications should set the ignore_bitfield_offloads bit on rxmode structure and use offloads field to set per-port offloads instead. * Any offloading set in eth_conf->[rt]xmode.offloads must be within the [rt]x_offload_capa returned from rte_eth_dev_info_get(). Any type of device supported offloading set in the input argument eth_conf->[rt]xmode.offloads to rte_eth_dev_configure() is enabled on all queues and it can't be disabled in rte_eth_[rt]x_queue_setup() * the Receive Side Scaling (RSS) configuration when using multiple Rx queues per port. Any RSS hash function set in eth_conf->rss_conf.rss_hf must be within the flow_type_rss_offloads provided by drivers via rte_eth_dev_info_get() API. Embedding all configuration information in a single data structure is the more flexible method that allows the addition of new features without changing the syntax of the API. Returns * 0: Success, device configured. * <0: Error code returned by the driver configuration function. int rte_eth_dev_is_removed (uint16_t port_id) Check if an Ethernet device was physically removed. Parameters port_id The port identifier of the Ethernet device. Returns 1 when the Ethernet device is removed, otherwise 0. int rte_eth_rx_queue_setup (uint16_t port_id, uint16_t rx_queue_id, uint16_t nb_rx_desc, unsigned int socket_id, const struct rte_eth_rxconf * rx_conf, struct rte_mempool * mb_pool) Allocate and set up a receive queue for an Ethernet device. The function allocates a contiguous block of memory for nb_rx_desc receive descriptors from a memory zone associated with socket_id and initializes each receive descriptor with a network buffer allocated from the memory pool mb_pool. Parameters port_id The port identifier of the Ethernet device. rx_queue_id The index of the receive queue to set up. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). nb_rx_desc The number of receive descriptors to allocate for the re- ceive ring. socket_id The socket_id argument is the socket identifier in case of NUMA. The value can be SOCKET_ID_ANY if there is no NUMA constraint for the DMA memory allocated for the receive descriptors of the ring. rx_conf The pointer to the configuration data to be used for the re- ceive queue. NULL value is allowed, in which case default Rx configura- tion will be used. The rx_conf structure contains an rx_thresh struc- ture with the values of the Prefetch, Host, and Write-Back threshold registers of the receive ring. In addition it contains the hardware of- floads features to activate using the RTE_ETH_RX_OFFLOAD_* flags. If an offloading set in rx_conf->offloads hasn't been set in the input argu- ment eth_conf->rxmode.offloads to rte_eth_dev_configure(), it is a new added offloading, it must be per-queue type and it is enabled for the queue. No need to repeat any bit in rx_conf->offloads which has already been enabled in rte_eth_dev_configure() at port level. An offloading enabled at port level can't be disabled at queue level. The configura- tion structure also contains the pointer to the array of the receiving buffer segment descriptions, see rx_seg and rx_nseg fields, this ex- tended configuration might be used by split offloads like RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT. If mb_pool is not NULL, the extended configuration fields must be set to NULL and zero. mb_pool The pointer to the memory pool from which to allocate rte_mbuf network memory buffers to populate each descriptor of the receive ring. There are two options to provide Rx buffer configuration: * single pool: mb_pool is not NULL, rx_conf.rx_nseg is 0. * multiple segments description: mb_pool is NULL, rx_conf.rx_seg is not NULL, rx_conf.rx_nseg is not 0. Taken only if flag RTE_ETH_RX_OF- FLOAD_BUFFER_SPLIT is set in offloads. Returns * 0: Success, receive queue correctly set up. * -EIO: if device is removed. * -ENODEV: if port_id is invalid. * -EINVAL: The memory pool pointer is null or the size of network buffers which can be allocated from this memory pool does not fit the various buffer sizes allowed by the device controller. * -ENOMEM: Unable to allocate the receive ring descriptors or to allo- cate network memory buffers from the memory pool when initializing receive descriptors. __rte_experimental int rte_eth_rx_hairpin_queue_setup (uint16_t port_id, uint16_t rx_queue_id, uint16_t nb_rx_desc, const struct rte_eth_hair- pin_conf * conf) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Allocate and set up a hairpin receive queue for an Ethernet device. The function set up the selected queue to be used in hairpin. Parameters port_id The port identifier of the Ethernet device. rx_queue_id The index of the receive queue to set up. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). nb_rx_desc The number of receive descriptors to allocate for the re- ceive ring. 0 means the PMD will use default value. conf The pointer to the hairpin configuration. Returns * (0) if successful. * (-ENODEV) if port_id is invalid. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-ENOMEM) if unable to allocate the resources. int rte_eth_tx_queue_setup (uint16_t port_id, uint16_t tx_queue_id, uint16_t nb_tx_desc, unsigned int socket_id, const struct rte_eth_txconf * tx_conf) Allocate and set up a transmit queue for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. tx_queue_id The index of the transmit queue to set up. The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_configure(). nb_tx_desc The number of transmit descriptors to allocate for the transmit ring. socket_id The socket_id argument is the socket identifier in case of NUMA. Its value can be SOCKET_ID_ANY if there is no NUMA constraint for the DMA memory allocated for the transmit descriptors of the ring. tx_conf The pointer to the configuration data to be used for the trans- mit queue. NULL value is allowed, in which case default Tx configura- tion will be used. The tx_conf structure contains the following data: * The tx_thresh structure with the values of the Prefetch, Host, and Write-Back threshold registers of the transmit ring. When setting Write-Back threshold to the value greater then zero, tx_rs_thresh value should be explicitly set to one. * The tx_free_thresh value indicates the [minimum] number of network buffers that must be pending in the transmit ring to trigger their [implicit] freeing by the driver transmit function. * The tx_rs_thresh value indicates the [minimum] number of transmit de- scriptors that must be pending in the transmit ring before setting the RS bit on a descriptor by the driver transmit function. The tx_rs_thresh value should be less or equal then tx_free_thresh value, and both of them should be less then nb_tx_desc - 3. * The offloads member contains Tx offloads to be enabled. If an of- floading set in tx_conf->offloads hasn't been set in the input argu- ment eth_conf->txmode.offloads to rte_eth_dev_configure(), it is a new added offloading, it must be per-queue type and it is enabled for the queue. No need to repeat any bit in tx_conf->offloads which has already been enabled in rte_eth_dev_configure() at port level. An of- floading enabled at port level can't be disabled at queue level. Note that setting tx_free_thresh or tx_rs_thresh value to 0 forces the transmit function to use default values. Returns * 0: Success, the transmit queue is correctly set up. * -ENOMEM: Unable to allocate the transmit ring descriptors. __rte_experimental int rte_eth_tx_hairpin_queue_setup (uint16_t port_id, uint16_t tx_queue_id, uint16_t nb_tx_desc, const struct rte_eth_hair- pin_conf * conf) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Allocate and set up a transmit hairpin queue for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. tx_queue_id The index of the transmit queue to set up. The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_configure(). nb_tx_desc The number of transmit descriptors to allocate for the transmit ring. 0 to set default PMD value. conf The hairpin configuration. Returns * (0) if successful. * (-ENODEV) if port_id is invalid. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-ENOMEM) if unable to allocate the resources. __rte_experimental int rte_eth_hairpin_get_peer_ports (uint16_t port_id, uint16_t * peer_ports, size_t len, uint32_t direction) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Get all the hairpin peer Rx / Tx ports of the current port. The caller should ensure that the array is large enough to save the ports list. Parameters port_id The port identifier of the Ethernet device. peer_ports Pointer to the array to store the peer ports list. len Length of the array to store the port identifiers. direction Current port to peer port direction positive - current used as Tx to get all peer Rx ports. zero - current used as Rx to get all peer Tx ports. Returns * (0 or positive) actual peer ports number. * (-EINVAL) if bad parameter. * (-ENODEV) if port_id invalid * (-ENOTSUP) if hardware doesn't support. * Others detailed errors from PMDs. __rte_experimental int rte_eth_hairpin_bind (uint16_t tx_port, uint16_t rx_port) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Bind all hairpin Tx queues of one port to the Rx queues of the peer port. It is only allowed to call this function after all hairpin queues are con- figured properly and the devices are in started state. Parameters tx_port The identifier of the Tx port. rx_port The identifier of peer Rx port. RTE_MAX_ETHPORTS is allowed for the traversal of all devices. Rx port ID could have the same value as Tx port ID. Returns * (0) if successful. * (-ENODEV) if Tx port ID is invalid. * (-EBUSY) if device is not in started state. * (-ENOTSUP) if hardware doesn't support. * Others detailed errors from PMDs. __rte_experimental int rte_eth_hairpin_unbind (uint16_t tx_port, uint16_t rx_port) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Unbind all hairpin Tx queues of one port from the Rx queues of the peer port. This should be called before closing the Tx or Rx devices, if the bind function is called before. After unbinding the hairpin ports pair, it is allowed to bind them again. Changing queues configuration should be af- ter stopping the device(s). Parameters tx_port The identifier of the Tx port. rx_port The identifier of peer Rx port. RTE_MAX_ETHPORTS is allowed for traversal of all devices. Rx port ID could have the same value as Tx port ID. Returns * (0) if successful. * (-ENODEV) if Tx port ID is invalid. * (-EBUSY) if device is in stopped state. * (-ENOTSUP) if hardware doesn't support. * Others detailed errors from PMDs. __rte_experimental int rte_eth_dev_count_aggr_ports (uint16_t port_id) Warning EXPERIMENTAL: this API may change without prior notice. Get the number of aggregated ports of the DPDK port (specified with port_id). It is used when multiple ports are aggregated into a single one. For the regular physical port doesn't have aggregated ports, the number of aggregated ports is reported as 0. Parameters port_id The port identifier of the Ethernet device. Returns * (>=0) the number of aggregated port if success. __rte_experimental int rte_eth_dev_map_aggr_tx_affinity (uint16_t port_id, uint16_t tx_queue_id, uint8_t affinity) Warning EXPERIMENTAL: this API may change without prior notice. Map a Tx queue with an aggregated port of the DPDK port (specified with port_id). When multiple ports are aggregated into a single one, it allows to choose which port to use for Tx via a queue. The application should use rte_eth_dev_map_aggr_tx_affinity() after rte_eth_dev_configure(), rte_eth_tx_queue_setup(), and before rte_eth_dev_start(). Parameters port_id The identifier of the port used in rte_eth_tx_burst(). tx_queue_id The index of the transmit queue used in rte_eth_tx_burst(). The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_configure(). affinity The number of the aggregated port. Value 0 means no affinity and traffic could be routed to any aggregated port. The first aggre- gated port is number 1 and so on. The maximum number is given by rte_eth_dev_count_aggr_ports(). Returns Zero if successful. Non-zero otherwise. int rte_eth_dev_socket_id (uint16_t port_id) Return the NUMA socket to which an Ethernet device is connected Parameters port_id The port identifier of the Ethernet device Returns * The NUMA socket ID which the Ethernet device is connected to. * -1 (which translates to SOCKET_ID_ANY) if the socket could not be de- termined. rte_errno is then set to: * EINVAL is the port_id is invalid, * 0 is the socket could not be determined, int rte_eth_dev_is_valid_port (uint16_t port_id) Check if port_id of device is attached Parameters port_id The port identifier of the Ethernet device Returns * 0 if port is out of range or not attached * 1 if device is attached __rte_experimental int rte_eth_rx_queue_is_valid (uint16_t port_id, uint16_t queue_id) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice. Check if Rx queue is valid. If the queue has been setup, it is considered valid. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the receive queue. Returns * -ENODEV: if port_id is invalid. * -EINVAL: if queue_id is out of range or queue has not been setup. * 0 if Rx queue is valid. __rte_experimental int rte_eth_tx_queue_is_valid (uint16_t port_id, uint16_t queue_id) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice. Check if Tx queue is valid. If the queue has been setup, it is considered valid. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the transmit queue. Returns * -ENODEV: if port_id is invalid. * -EINVAL: if queue_id is out of range or queue has not been setup. * 0 if Tx queue is valid. int rte_eth_dev_rx_queue_start (uint16_t port_id, uint16_t rx_queue_id) Start specified Rx queue of a port. It is used when rx_deferred_start flag of the specified queue is true. Parameters port_id The port identifier of the Ethernet device rx_queue_id The index of the Rx queue to update the ring. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). Returns * 0: Success, the receive queue is started. * -ENODEV: if port_id is invalid. * -EINVAL: The queue_id out of range or belong to hairpin. * -EIO: if device is removed. * -ENOTSUP: The function not supported in PMD. int rte_eth_dev_rx_queue_stop (uint16_t port_id, uint16_t rx_queue_id) Stop specified Rx queue of a port Parameters port_id The port identifier of the Ethernet device rx_queue_id The index of the Rx queue to update the ring. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). Returns * 0: Success, the receive queue is stopped. * -ENODEV: if port_id is invalid. * -EINVAL: The queue_id out of range or belong to hairpin. * -EIO: if device is removed. * -ENOTSUP: The function not supported in PMD. int rte_eth_dev_tx_queue_start (uint16_t port_id, uint16_t tx_queue_id) Start Tx for specified queue of a port. It is used when tx_deferred_start flag of the specified queue is true. Parameters port_id The port identifier of the Ethernet device tx_queue_id The index of the Tx queue to update the ring. The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_configure(). Returns * 0: Success, the transmit queue is started. * -ENODEV: if port_id is invalid. * -EINVAL: The queue_id out of range or belong to hairpin. * -EIO: if device is removed. * -ENOTSUP: The function not supported in PMD. int rte_eth_dev_tx_queue_stop (uint16_t port_id, uint16_t tx_queue_id) Stop specified Tx queue of a port Parameters port_id The port identifier of the Ethernet device tx_queue_id The index of the Tx queue to update the ring. The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_configure(). Returns * 0: Success, the transmit queue is stopped. * -ENODEV: if port_id is invalid. * -EINVAL: The queue_id out of range or belong to hairpin. * -EIO: if device is removed. * -ENOTSUP: The function not supported in PMD. int rte_eth_dev_start (uint16_t port_id) Start an Ethernet device. The device start step is the last one and consists of setting the config- ured offload features and in starting the transmit and the receive units of the device. Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be set before PMD port start callback function is invoked. All device queues (except form deferred start queues) status should be RTE_ETH_QUEUE_STATE_STARTED after start. On success, all basic functions exported by the Ethernet API (link status, receive/transmit, and so on) can be invoked. Parameters port_id The port identifier of the Ethernet device. Returns * 0: Success, Ethernet device started. * -EAGAIN: If start operation must be retried. * <0: Error code of the driver device start function. int rte_eth_dev_stop (uint16_t port_id) Stop an Ethernet device. The device can be restarted with a call to rte_eth_dev_start() All device queues status should be RTE_ETH_QUEUE_STATE_STOPPED after stop. Parameters port_id The port identifier of the Ethernet device. Returns * 0: Success, Ethernet device stopped. * -EBUSY: If stopping the port is not allowed in current state. * <0: Error code of the driver device stop function. int rte_eth_dev_set_link_up (uint16_t port_id) Link up an Ethernet device. Set device link up will re-enable the device Rx/Tx functionality after it is previously set device linked down. Parameters port_id The port identifier of the Ethernet device. Returns * 0: Success, Ethernet device linked up. * <0: Error code of the driver device link up function. int rte_eth_dev_set_link_down (uint16_t port_id) Link down an Ethernet device. The device Rx/Tx functionality will be dis- abled if success, and it can be re-enabled with a call to rte_eth_dev_set_link_up() Parameters port_id The port identifier of the Ethernet device. int rte_eth_dev_close (uint16_t port_id) Close a stopped Ethernet device. The device cannot be restarted! The func- tion frees all port resources. Parameters port_id The port identifier of the Ethernet device. Returns * Zero if the port is closed successfully. * Negative if something went wrong. int rte_eth_dev_reset (uint16_t port_id) Reset a Ethernet device and keep its port ID. When a port has to be reset passively, the DPDK application can invoke this function. For example when a PF is reset, all its VFs should also be reset. Normally a DPDK application can invoke this function when RTE_ETH_EVENT_INTR_RESET event is detected, but can also use it to start a port reset in other circumstances. When this function is called, it first stops the port and then calls the PMD specific dev_uninit( ) and dev_init( ) to return the port to initial state, in which no Tx and Rx queues are setup, as if the port has been re- set and not started. The port keeps the port ID it had before the function call. After calling rte_eth_dev_reset( ), the application should use rte_eth_dev_configure( ), rte_eth_rx_queue_setup( ), rte_eth_tx_queue_setup( ), and rte_eth_dev_start( ) to reconfigure the de- vice as appropriate. Note: To avoid unexpected behavior, the application should stop calling Tx and Rx functions before calling rte_eth_dev_reset( ). For thread safety, all these controlling functions should be called from the same thread. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if successful. * (-ENODEV) if port_id is invalid. * (-ENOTSUP) if hardware doesn't support this function. * (-EPERM) if not ran from the primary process. * (-EIO) if re-initialisation failed or device is removed. * (-ENOMEM) if the reset failed due to OOM. * (-EAGAIN) if the reset temporarily failed and should be retried later. int rte_eth_promiscuous_enable (uint16_t port_id) Enable receipt in promiscuous mode for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if successful. * (-ENOTSUP) if support for promiscuous_enable() does not exist for the device. * (-ENODEV) if port_id invalid. int rte_eth_promiscuous_disable (uint16_t port_id) Disable receipt in promiscuous mode for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if successful. * (-ENOTSUP) if support for promiscuous_disable() does not exist for the device. * (-ENODEV) if port_id invalid. int rte_eth_promiscuous_get (uint16_t port_id) Return the value of promiscuous mode for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (1) if promiscuous is enabled * (0) if promiscuous is disabled. * (-1) on error int rte_eth_allmulticast_enable (uint16_t port_id) Enable the receipt of any multicast frame by an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if successful. * (-ENOTSUP) if support for allmulticast_enable() does not exist for the device. * (-ENODEV) if port_id invalid. int rte_eth_allmulticast_disable (uint16_t port_id) Disable the receipt of all multicast frames by an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if successful. * (-ENOTSUP) if support for allmulticast_disable() does not exist for the device. * (-ENODEV) if port_id invalid. int rte_eth_allmulticast_get (uint16_t port_id) Return the value of allmulticast mode for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (1) if allmulticast is enabled * (0) if allmulticast is disabled. * (-1) on error int rte_eth_link_get (uint16_t port_id, struct rte_eth_link * link) Retrieve the link status (up/down), the duplex mode (half/full), the nego- tiation (auto/fixed), and if available, the speed (Mbps). It might need to wait up to 9 seconds. See also rte_eth_link_get_nowait. Parameters port_id The port identifier of the Ethernet device. link Link information written back. Returns * (0) if successful. * (-ENOTSUP) if the function is not supported in PMD. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. int rte_eth_link_get_nowait (uint16_t port_id, struct rte_eth_link * link) Retrieve the link status (up/down), the duplex mode (half/full), the nego- tiation (auto/fixed), and if available, the speed (Mbps). Parameters port_id The port identifier of the Ethernet device. link Link information written back. Returns * (0) if successful. * (-ENOTSUP) if the function is not supported in PMD. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. __rte_experimental const char * rte_eth_link_speed_to_str (uint32_t link_speed) Warning EXPERIMENTAL: this API may change without prior notice. The function converts a link_speed to a string. It handles all special val- ues like unknown or none speed. Parameters link_speed link_speed of rte_eth_link struct Returns Link speed in textual format. It's pointer to immutable memory. No free is required. __rte_experimental const char * rte_eth_link_connector_to_str (enum rte_eth_link_connector link_connector) Warning EXPERIMENTAL: this API may change without prior notice. This function converts an Ethernet link type to a string. Parameters link_connector The link type to convert. Returns NULL for invalid link connector values otherwise the string representa- tion of the link type. __rte_experimental int rte_eth_link_to_str (char * str, size_t len, const struct rte_eth_link * eth_link) Warning EXPERIMENTAL: this API may change without prior notice. The function converts a rte_eth_link struct representing a link status to a string. Parameters str A pointer to a string to be filled with textual representation of device status. At least RTE_ETH_LINK_MAX_STR_LEN bytes should be allo- cated to store default link status text. len Length of available memory at 'str' string. eth_link Link status returned by rte_eth_link_get function Returns Number of bytes written to str array or -EINVAL if bad parameter. __rte_experimental int rte_eth_speed_lanes_get (uint16_t port_id, uint32_t * lanes) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Get Active lanes. Parameters port_id The port identifier of the Ethernet device. lanes Driver updates lanes with the number of active lanes. On a sup- ported NIC on link up, lanes will be a non-zero value irrespective whether the link is Autonegotiated or Fixed speed. No information is displayed for error. Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support. that op- eration. * (-EIO) if device is removed. * (-ENODEV) if port_id invalid. __rte_experimental int rte_eth_speed_lanes_set (uint16_t port_id, uint32_t speed_lanes) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Set speed lanes supported by the NIC. Parameters port_id The port identifier of the Ethernet device. speed_lanes A non-zero number of speed lanes, that will be applied to the ethernet PHY along with the fixed speed configuration. Driver re- turns error if the user lanes is not in speeds capability list. Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support. that op- eration. * (-EIO) if device is removed. * (-ENODEV) if port_id invalid. * (-EINVAL) if lanes count not in speeds capability list. __rte_experimental int rte_eth_speed_lanes_get_capability (uint16_t port_id, struct rte_eth_speed_lanes_capa * speed_lanes_capa, unsigned int num) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Get speed lanes supported by the NIC. Parameters port_id The port identifier of the Ethernet device. speed_lanes_capa An array of supported speed and its supported lanes. num Size of the speed_lanes_capa array. The size is equal to the sup- ported speeds list size. Value of num is derived by calling this api with speed_lanes_capa=NULL and num=0 Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support. that op- eration. * (-EIO) if device is removed. * (-ENODEV) if port_id invalid. * (-EINVAL) if speed_lanes invalid int rte_eth_stats_get (uint16_t port_id, struct rte_eth_stats * stats) Retrieve the general I/O statistics of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. stats A pointer to a structure of type rte_eth_stats to be filled with the values of device counters for the following set of statistics: * ipackets with the total of successfully received packets. * opackets with the total of successfully transmitted packets. * ibytes with the total of successfully received bytes. * obytes with the total of successfully transmitted bytes. * ierrors with the total of erroneous received packets. * oerrors with the total of failed transmitted packets. Returns Zero if successful. Non-zero otherwise. int rte_eth_stats_reset (uint16_t port_id) Reset the general I/O statistics of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if device notified to reset stats. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port_id invalid. * (<0): Error code of the driver stats reset function. int rte_eth_xstats_get_names (uint16_t port_id, struct rte_eth_xstat_name * xstats_names, unsigned int size) Retrieve names of extended statistics of an Ethernet device. There is an assumption that 'xstat_names' and 'xstats' arrays are matched by array index: xstats_names[i].name => xstats[i].value And the array index is same with id field of 'struct rte_eth_xstat': xs- tats[i].id == i This assumption makes key-value pair matching less flexible but simpler. Parameters port_id The port identifier of the Ethernet device. xstats_names An rte_eth_xstat_name array of at least size elements to be filled. If set to NULL, the function returns the required number of elements. size The size of the xstats_names array (number of elements). Returns * A positive value lower or equal to size: success. The return value is the number of entries filled in the stats table. * A positive value higher than size: error, the given statistics table is too small. The return value corresponds to the size that should be given to succeed. The entries in the table are not valid and shall not be used by the caller. * A negative value on error (invalid port ID). int rte_eth_xstats_get (uint16_t port_id, struct rte_eth_xstat * xstats, un- signed int n) Retrieve extended statistics of an Ethernet device. There is an assumption that 'xstat_names' and 'xstats' arrays are matched by array index: xstats_names[i].name => xstats[i].value And the array index is same with id field of 'struct rte_eth_xstat': xs- tats[i].id == i This assumption makes key-value pair matching less flexible but simpler. Parameters port_id The port identifier of the Ethernet device. xstats A pointer to a table of structure of type rte_eth_xstat to be filled with device statistics ids and values. This parameter can be set to NULL if and only if n is 0. n The size of the xstats array (number of elements). If lower than the required number of elements, the function returns the required number of elements. If equal to zero, the xstats must be NULL, the function returns the required number of elements. Returns * A positive value lower or equal to n: success. The return value is the number of entries filled in the stats table. * A positive value higher than n: error, the given statistics table is too small. The return value corresponds to the size that should be given to succeed. The entries in the table are not valid and shall not be used by the caller. * A negative value on error (invalid port ID). int rte_eth_xstats_get_names_by_id (uint16_t port_id, struct rte_eth_xs- tat_name * xstats_names, unsigned int size, uint64_t * ids) Retrieve names of extended statistics of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. xstats_names Array to be filled in with names of requested device sta- tistics. Must not be NULL if ids are specified (not NULL). size Number of elements in xstats_names array (if not NULL) and in ids array (if not NULL). Must be 0 if both array pointers are NULL. ids IDs array given by app to retrieve specific statistics. May be NULL to retrieve names of all available statistics or, if xstats_names is NULL as well, just the number of available statistics. Returns * A positive value lower or equal to size: success. The return value is the number of entries filled in the stats table. * A positive value higher than size: success. The given statistics ta- ble is too small. The return value corresponds to the size that should be given to succeed. The entries in the table are not valid and shall not be used by the caller. * A negative value on error. int rte_eth_xstats_get_by_id (uint16_t port_id, const uint64_t * ids, uint64_t * values, unsigned int size) Retrieve extended statistics of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. ids IDs array given by app to retrieve specific statistics. May be NULL to retrieve all available statistics or, if values is NULL as well, just the number of available statistics. values Array to be filled in with requested device statistics. Must not be NULL if ids are specified (not NULL). size Number of elements in values array (if not NULL) and in ids array (if not NULL). Must be 0 if both array pointers are NULL. Returns * A positive value lower or equal to size: success. The return value is the number of entries filled in the stats table. * A positive value higher than size: success: The given statistics ta- ble is too small. The return value corresponds to the size that should be given to succeed. The entries in the table are not valid and shall not be used by the caller. * A negative value on error. int rte_eth_xstats_get_id_by_name (uint16_t port_id, const char * xstat_name, uint64_t * id) Gets the ID of a statistic from its name. This function searches for the statistics using string compares, and as such should not be used on the fast-path. For fast-path retrieval of spe- cific statistics, store the ID as provided in id from this function, and pass the ID to rte_eth_xstats_get() Parameters port_id The port to look up statistics from xstat_name The name of the statistic to return id A pointer to an app-supplied uint64_t which should be set to the ID of the stat if the stat exists. Returns 0 on success -ENODEV for invalid port_id, -EIO if device is removed, -EINVAL if the xstat_name doesn't exist in port_id -ENOMEM if bad para- meter. __rte_experimental int rte_eth_xstats_set_counter (uint16_t port_id, uint64_t id, int on_off) Enable/Disable the xstat counter of the given id. Parameters port_id The port to look up statistics from id The ID of the counter to enable on_off The state to set the counter to. Returns * (0) on success * (-EEXIST) counter already enabled * (-ENOTSUP) enable/disable is not implemented * (-EINVAL) xstat id is invalid * (-EPERM) enabling this counter is not permitted * (-ENOSPC) no resources __rte_experimental int rte_eth_xstats_query_state (uint16_t port_id, uint64_t id) Query the state of the xstat counter. Parameters port_id The port to look up statistics from id The ID of the counter to query Returns * (0) xstat is enabled * (1) xstat is disabled * (-ENOTSUP) enable/disabling is not implemented * (-EINVAL) xstat id is invalid int rte_eth_xstats_reset (uint16_t port_id) Reset extended statistics of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if device notified to reset extended stats. * (-ENOTSUP) if pmd doesn't support both extended stats and basic stats reset. * (-ENODEV) if port_id invalid. * (<0): Error code of the driver xstats reset function. __rte_deprecated int rte_eth_dev_set_tx_queue_stats_mapping (uint16_t port_id, uint16_t tx_queue_id, uint8_t stat_idx) Set a mapping for the specified transmit queue to the specified per-queue statistics counter. Parameters port_id The port identifier of the Ethernet device. tx_queue_id The index of the transmit queue for which a queue stats mapping is required. The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_configure(). stat_idx The per-queue packet statistics functionality number that the transmit queue is to be assigned. The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1]. Max RTE_ETHDEV_QUEUE_STAT_CNTRS being 256. Returns Zero if successful. Non-zero otherwise. __rte_deprecated int rte_eth_dev_set_rx_queue_stats_mapping (uint16_t port_id, uint16_t rx_queue_id, uint8_t stat_idx) Set a mapping for the specified receive queue to the specified per-queue statistics counter. Parameters port_id The port identifier of the Ethernet device. rx_queue_id The index of the receive queue for which a queue stats map- ping is required. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). stat_idx The per-queue packet statistics functionality number that the receive queue is to be assigned. The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1]. Max RTE_ETHDEV_QUEUE_STAT_CNTRS being 256. Returns Zero if successful. Non-zero otherwise. int rte_eth_macaddr_get (uint16_t port_id, struct rte_ether_addr * mac_addr) Retrieve the Ethernet address of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. mac_addr A pointer to a structure of type ether_addr to be filled with the Ethernet address of the Ethernet device. Returns * (0) if successful * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. __rte_experimental int rte_eth_macaddrs_get (uint16_t port_id, struct rte_ether_addr * ma, unsigned int num) Warning EXPERIMENTAL: this API may change without prior notice Retrieve the Ethernet addresses of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. ma A pointer to an array of structures of type ether_addr to be filled with the Ethernet addresses of the Ethernet device. num Number of elements in the ma array. Note that rte_eth_dev_info::max_mac_addrs can be used to retrieve max number of Ethernet addresses for given port. Returns * number of retrieved addresses if successful * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. int rte_eth_dev_info_get (uint16_t port_id, struct rte_eth_dev_info * dev_info) Retrieve the contextual information of an Ethernet device. This function returns the Ethernet device information based on the values stored internally in the device specific data. For example: number of queues, descriptor limits, device capabilities and offload flags. Parameters port_id The port identifier of the Ethernet device. dev_info A pointer to a structure of type rte_eth_dev_info to be filled with the contextual information of the Ethernet device. Returns * (0) if successful. * (-ENOTSUP) if support for dev_infos_get() does not exist for the de- vice. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. __rte_experimental int rte_eth_dev_conf_get (uint16_t port_id, struct rte_eth_conf * dev_conf) Warning EXPERIMENTAL: this API may change without prior notice. Retrieve the configuration of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. dev_conf Location for Ethernet device configuration to be filled in. Returns * (0) if successful. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. int rte_eth_dev_fw_version_get (uint16_t port_id, char * fw_version, size_t fw_size) Retrieve the firmware version of a device. Parameters port_id The port identifier of the device. fw_version A pointer to a string array storing the firmware version of a device, the string includes terminating null. This pointer is allo- cated by caller. fw_size The size of the string array pointed by fw_version, which should be large enough to store firmware version of the device. Returns * (0) if successful. * (-ENOTSUP) if operation is not supported. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if bad parameter. * (>0) if fw_size is not enough to store firmware version, return the size of the non truncated string. int rte_eth_dev_get_supported_ptypes (uint16_t port_id, uint32_t ptype_mask, uint32_t * ptypes, int num) Retrieve the supported packet types of an Ethernet device. When a packet type is announced as supported, it must be recognized by the PMD. For instance, if RTE_PTYPE_L2_ETHER, RTE_PTYPE_L2_ETHER_VLAN and RTE_PTYPE_L3_IPV4 are announced, the PMD must return the following packet types for these packets: * Ether/IPv4 -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4 * Ether/VLAN/IPv4 -> RTE_PTYPE_L2_ETHER_VLAN | RTE_PTYPE_L3_IPV4 * Ether/[anything else] -> RTE_PTYPE_L2_ETHER * Ether/VLAN/[anything else] -> RTE_PTYPE_L2_ETHER_VLAN When a packet is received by a PMD, the most precise type must be returned among the ones supported. However a PMD is allowed to set packet type that is not in the supported list, at the condition that it is more precise. Therefore, a PMD announcing no supported packet types can still set a matching packet type in a received packet. Note Better to invoke this API after the device is already started or Rx burst function is decided, to obtain correct supported ptypes. if a given PMD does not report what ptypes it supports, then the sup- ported ptype count is reported as 0. Parameters port_id The port identifier of the Ethernet device. ptype_mask A hint of what kind of packet type which the caller is in- terested in. ptypes An array pointer to store adequate packet types, allocated by caller. num Size of the array pointed by param ptypes. Returns * (>=0) Number of supported ptypes. If the number of types exceeds num, only num entries will be filled into the ptypes array, but the full count of supported ptypes will be returned. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. int rte_eth_dev_set_ptypes (uint16_t port_id, uint32_t ptype_mask, uint32_t * set_ptypes, unsigned int num) Inform Ethernet device about reduced range of packet types to handle. Application can use this function to set only specific ptypes that it's in- terested. This information can be used by the PMD to optimize Rx path. The function accepts an array set_ptypes allocated by the caller to store the packet types set by the driver, the last element of the array is set to RTE_PTYPE_UNKNOWN. The size of the set_ptype array should be rte_eth_dev_get_supported_ptypes() + 1 else it might only be filled par- tially. Parameters port_id The port identifier of the Ethernet device. ptype_mask The ptype family that application is interested in should be bitwise OR of RTE_PTYPE_*_MASK or 0. set_ptypes An array pointer to store set packet types, allocated by caller. The function marks the end of array with RTE_PTYPE_UNKNOWN. num Size of the array pointed by param ptypes. Should be rte_eth_dev_get_supported_ptypes() + 1 to accommodate the set ptypes. Returns * (0) if Success. * (-ENODEV) if port_id invalid. * (-EINVAL) if ptype_mask is invalid (or) set_ptypes is NULL and num > 0. int rte_eth_dev_get_mtu (uint16_t port_id, uint16_t * mtu) Retrieve the MTU of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. mtu A pointer to a uint16_t where the retrieved MTU is to be stored. Returns * (0) if successful. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. int rte_eth_dev_set_mtu (uint16_t port_id, uint16_t mtu) Change the MTU of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. mtu A uint16_t for the MTU to be applied. Returns * (0) if successful. * (-ENOTSUP) if operation is not supported. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if mtu invalid, validation of mtu can occur within rte_eth_dev_set_mtu if dev_infos_get is supported by the device or when the mtu is set using dev->dev_ops->mtu_set. * (-EBUSY) if operation is not allowed when the port is running int rte_eth_dev_vlan_filter (uint16_t port_id, uint16_t vlan_id, int on) Enable/Disable hardware filtering by an Ethernet device of received VLAN packets tagged with a given VLAN Tag Identifier. Parameters port_id The port identifier of the Ethernet device. vlan_id The VLAN Tag Identifier whose filtering must be enabled or dis- abled. on If > 0, enable VLAN filtering of VLAN packets tagged with vlan_id. Otherwise, disable VLAN filtering of VLAN packets tagged with vlan_id. Returns * (0) if successful. * (-ENOTSUP) if hardware-assisted VLAN filtering not configured. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-ENOSYS) if VLAN filtering on port_id disabled. * (-EINVAL) if vlan_id > 4095. int rte_eth_dev_set_vlan_strip_on_queue (uint16_t port_id, uint16_t rx_queue_id, int on) Enable/Disable hardware VLAN Strip by a Rx queue of an Ethernet device. Parameters port_id The port identifier of the Ethernet device. rx_queue_id The index of the receive queue on which to enable/disable VLAN stripping. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). on If 1, Enable VLAN Stripping of the receive queue of the Ethernet port. If 0, Disable VLAN Stripping of the receive queue of the Ethernet port. Returns * (0) if successful. * (-ENOTSUP) if hardware-assisted VLAN stripping not configured. * (-ENODEV) if port_id invalid. * (-EINVAL) if rx_queue_id invalid. int rte_eth_dev_set_vlan_ether_type (uint16_t port_id, enum rte_vlan_type vlan_type, uint16_t tag_type) Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to the VLAN header. Parameters port_id The port identifier of the Ethernet device. vlan_type The VLAN type. tag_type The Tag Protocol ID Returns * (0) if successful. * (-ENOTSUP) if hardware-assisted VLAN TPID setup is not supported. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. int rte_eth_dev_set_vlan_offload (uint16_t port_id, int offload_mask) Set VLAN offload configuration on an Ethernet device. Parameters port_id The port identifier of the Ethernet device. offload_mask The VLAN Offload bit mask can be mixed use with 'OR' RTE_ETH_VLAN_STRIP_OFFLOAD RTE_ETH_VLAN_FILTER_OFFLOAD RTE_ETH_VLAN_EX- TEND_OFFLOAD RTE_ETH_QINQ_STRIP_OFFLOAD Returns * (0) if successful. * (-ENOTSUP) if hardware-assisted VLAN filtering not configured. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. int rte_eth_dev_get_vlan_offload (uint16_t port_id) Read VLAN Offload configuration from an Ethernet device Parameters port_id The port identifier of the Ethernet device. Returns * (>0) if successful. Bit mask to indicate RTE_ETH_VLAN_STRIP_OFFLOAD RTE_ETH_VLAN_FILTER_OFFLOAD RTE_ETH_VLAN_EXTEND_OFFLOAD RTE_ETH_QINQ_STRIP_OFFLOAD * (-ENODEV) if port_id invalid. int rte_eth_dev_set_vlan_pvid (uint16_t port_id, uint16_t pvid, int on) Set port based Tx VLAN insertion on or off. Parameters port_id The port identifier of the Ethernet device. pvid Port based Tx VLAN identifier together with user priority. on Turn on or off the port based Tx VLAN insertion. Returns * (0) if successful. * negative if failed. __rte_experimental int rte_eth_rx_avail_thresh_set (uint16_t port_id, uint16_t queue_id, uint8_t avail_thresh) Warning EXPERIMENTAL: this API may change without prior notice. Set Rx queue available descriptors threshold. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the receive queue. avail_thresh The available descriptors threshold is percentage of Rx queue size which describes the availability of Rx queue for hardware. If the Rx queue availability is below it, the event RTE_ETH_EVENT_RX_AVAIL_THRESH is triggered. [1-99] to set a new avail- able descriptors threshold. 0 to disable threshold monitoring. Returns * 0 if successful. * (-ENODEV) if port_id is invalid. * (-EINVAL) if bad parameter. * (-ENOTSUP) if available Rx descriptors threshold is not supported. * (-EIO) if device is removed. __rte_experimental int rte_eth_rx_avail_thresh_query (uint16_t port_id, uint16_t * queue_id, uint8_t * avail_thresh) Warning EXPERIMENTAL: this API may change without prior notice. Find Rx queue with RTE_ETH_EVENT_RX_AVAIL_THRESH event pending. Parameters port_id The port identifier of the Ethernet device. queue_id On input starting Rx queue index to search from. If the queue_id is bigger than maximum queue ID of the port, search is started from 0. So that application can keep calling this function to handle all pending events with a simple increment of queue_id on the next call. On output if return value is 1, Rx queue index with the event pending. avail_thresh Location for available descriptors threshold of the found Rx queue. Returns * 1 if an Rx queue with pending event is found. * 0 if no Rx queue with pending event is found. * (-ENODEV) if port_id is invalid. * (-EINVAL) if bad parameter (e.g. queue_id is NULL). * (-ENOTSUP) if operation is not supported. * (-EIO) if device is removed. int rte_eth_tx_buffer_init (struct rte_eth_dev_tx_buffer * buffer, uint16_t size) Initialize default values for buffered transmitting Parameters buffer Tx buffer to be initialized. size Buffer size Returns 0 if no error int rte_eth_tx_buffer_set_err_callback (struct rte_eth_dev_tx_buffer * buffer, buffer_tx_error_fn callback, void * userdata) Configure a callback for buffered packets which cannot be sent Register a specific callback to be called when an attempt is made to send all packets buffered on an Ethernet port, but not all packets can success- fully be sent. The callback registered here will be called only from calls to rte_eth_tx_buffer() and rte_eth_tx_buffer_flush() APIs. The default callback configured for each queue by default just frees the packets back to the calling mempool. If additional behaviour is required, for example, to count dropped packets, or to retry transmission of packets which cannot be sent, this function should be used to register a suitable callback func- tion to implement the desired behaviour. The example callback 'rte_eth_tx_buffer_count_callback()' is also provided as reference. Parameters buffer The port identifier of the Ethernet device. callback The function to be used as the callback. userdata Arbitrary parameter to be passed to the callback function Returns 0 on success, or -EINVAL if bad parameter void rte_eth_tx_buffer_drop_callback (struct rte_mbuf ** pkts, uint16_t un- sent, void * userdata) Callback function for silently dropping unsent buffered packets. This function can be passed to rte_eth_tx_buffer_set_err_callback() to ad- just the default behavior when buffered packets cannot be sent. This func- tion drops any unsent packets silently and is used by Tx buffered opera- tions as default behavior. NOTE: this function should not be called directly, instead it should be used as a callback for packet buffering. NOTE: when configuring this function as a callback with rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter should point to an uint64_t value. Parameters pkts The previously buffered packets which could not be sent unsent The number of unsent packets in the pkts array userdata Not used void rte_eth_tx_buffer_count_callback (struct rte_mbuf ** pkts, uint16_t un- sent, void * userdata) Callback function for tracking unsent buffered packets. This function can be passed to rte_eth_tx_buffer_set_err_callback() to ad- just the default behavior when buffered packets cannot be sent. This func- tion drops any unsent packets, but also updates a user-supplied counter to track the overall number of packets dropped. The counter should be an uint64_t variable. NOTE: this function should not be called directly, instead it should be used as a callback for packet buffering. NOTE: when configuring this function as a callback with rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter should point to an uint64_t value. Parameters pkts The previously buffered packets which could not be sent unsent The number of unsent packets in the pkts array userdata Pointer to an uint64_t value, which will be incremented by un- sent int rte_eth_tx_done_cleanup (uint16_t port_id, uint16_t queue_id, uint32_t free_cnt) Request the driver to free mbufs currently cached by the driver. The driver will only free the mbuf if it is no longer in use. It is the application's responsibility to ensure rte_eth_tx_buffer_flush(..) is called if needed. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the transmit queue through which output packets must be sent. The value must be in the range [0, nb_tx_queue - 1] pre- viously supplied to rte_eth_dev_configure(). free_cnt Maximum number of packets to free. Use 0 to indicate all pos- sible packets should be freed. Note that a packet may be using multiple mbufs. Returns Failure: < 0 -ENODEV: Invalid interface -EIO: device is removed -ENOT- SUP: Driver does not support function Success: >= 0 0-n: Number of packets freed. More packets may still remain in ring that are in use. int rte_eth_dev_callback_register (uint16_t port_id, enum rte_eth_event_type event, rte_eth_dev_cb_fn cb_fn, void * cb_arg) Register a callback function for port event. Parameters port_id Port ID. RTE_ETH_ALL means register the event for all port ids. event Event interested. cb_fn User supplied callback function to be called. cb_arg Pointer to the parameters for the registered callback. Returns * On success, zero. * On failure, a negative value. int rte_eth_dev_callback_unregister (uint16_t port_id, enum rte_eth_event_type event, rte_eth_dev_cb_fn cb_fn, void * cb_arg) Unregister a callback function for port event. Parameters port_id Port ID. RTE_ETH_ALL means unregister the event for all port ids. event Event interested. cb_fn User supplied callback function to be called. cb_arg Pointer to the parameters for the registered callback. -1 means to remove all for the same callback address and same event. Returns * On success, zero. * On failure, a negative value. int rte_eth_dev_rx_intr_enable (uint16_t port_id, uint16_t queue_id) When there is no Rx packet coming in Rx Queue for a long time, we can sleep lcore related to Rx Queue for power saving, and enable Rx interrupt to be triggered when Rx packet arrives. The rte_eth_dev_rx_intr_enable() function enables Rx queue interrupt on specific Rx queue of a port. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the receive queue from which to retrieve input packets. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support that op- eration. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. int rte_eth_dev_rx_intr_disable (uint16_t port_id, uint16_t queue_id) When lcore wakes up from Rx interrupt indicating packet coming, disable Rx interrupt and returns to polling mode. The rte_eth_dev_rx_intr_disable() function disables Rx queue interrupt on specific Rx queue of a port. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the receive queue from which to retrieve input packets. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support that op- eration. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. int rte_eth_dev_rx_intr_ctl (uint16_t port_id, int epfd, int op, void * data) Rx Interrupt control per port. Parameters port_id The port identifier of the Ethernet device. epfd Epoll instance fd which the intr vector associated to. Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. op The operation be performed for the vector. Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. data User raw data. Returns * On success, zero. * On failure, a negative value. int rte_eth_dev_rx_intr_ctl_q (uint16_t port_id, uint16_t queue_id, int epfd, int op, void * data) Rx Interrupt control per queue. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the receive queue from which to retrieve input packets. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). epfd Epoll instance fd which the intr vector associated to. Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. op The operation be performed for the vector. Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. data User raw data. Returns * On success, zero. * On failure, a negative value. int rte_eth_dev_rx_intr_ctl_q_get_fd (uint16_t port_id, uint16_t queue_id) Get interrupt fd per Rx queue. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the receive queue from which to retrieve input packets. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). Returns * (>=0) the interrupt fd associated to the requested Rx queue if suc- cessful. * (-1) on error. int rte_eth_led_on (uint16_t port_id) Turn on the LED on the Ethernet device. This function turns on the LED on the Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support that op- eration. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. int rte_eth_led_off (uint16_t port_id) Turn off the LED on the Ethernet device. This function turns off the LED on the Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support that op- eration. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. __rte_experimental int rte_eth_fec_get_capability (uint16_t port_id, struct rte_eth_fec_capa * speed_fec_capa, unsigned int num) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Get Forward Error Correction(FEC) capability. Parameters port_id The port identifier of the Ethernet device. speed_fec_capa speed_fec_capa is out only with per-speed capabilities. If set to NULL, the function returns the required number of required array entries. num a number of elements in an speed_fec_capa array. Returns * A non-negative value lower or equal to num: success. The return value is the number of entries filled in the fec capa array. * A non-negative value higher than num: error, the given fec capa array is too small. The return value corresponds to the num that should be given to succeed. The entries in fec capa array are not valid and shall not be used by the caller. * (-ENOTSUP) if underlying hardware OR driver doesn't support. that op- eration. * (-EIO) if device is removed. * (-ENODEV) if port_id invalid. * (-EINVAL) if num or speed_fec_capa invalid __rte_experimental int rte_eth_fec_get (uint16_t port_id, uint32_t * fec_capa) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Get current Forward Error Correction(FEC) mode. If link is down and AUTO is enabled, AUTO is returned, otherwise, configured FEC mode is returned. If link is up, current FEC mode is returned. Parameters port_id The port identifier of the Ethernet device. fec_capa A bitmask with the current FEC mode. Returns * (0) if successful. * (-ENOTSUP) if underlying hardware OR driver doesn't support. that op- eration. * (-EIO) if device is removed. * (-ENODEV) if port_id invalid. __rte_experimental int rte_eth_fec_set (uint16_t port_id, uint32_t fec_capa) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Set Forward Error Correction(FEC) mode. Parameters port_id The port identifier of the Ethernet device. fec_capa A bitmask of allowed FEC modes. If only the AUTO bit is set, the decision on which FEC mode to use will be made by HW/FW or driver. If the AUTO bit is set with some FEC modes, only specified FEC modes can be set. If AUTO bit is clear, specify FEC mode to be used (only one valid mode per speed may be set). Returns * (0) if successful. * (-EINVAL) if the FEC mode is not valid. * (-ENOTSUP) if underlying hardware OR driver doesn't support. * (-EIO) if device is removed. * (-ENODEV) if port_id invalid. int rte_eth_dev_flow_ctrl_get (uint16_t port_id, struct rte_eth_fc_conf * fc_conf) Get current status of the Ethernet link flow control for Ethernet device Parameters port_id The port identifier of the Ethernet device. fc_conf The pointer to the structure where to store the flow control parameters. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support flow control. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if bad parameter. int rte_eth_dev_flow_ctrl_set (uint16_t port_id, struct rte_eth_fc_conf * fc_conf) Configure the Ethernet link flow control for Ethernet device Parameters port_id The port identifier of the Ethernet device. fc_conf The pointer to the structure of the flow control parameters. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support flow control mode. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter * (-EIO) if flow control setup failure or device is removed. int rte_eth_dev_priority_flow_ctrl_set (uint16_t port_id, struct rte_eth_pfc_conf * pfc_conf) Configure the Ethernet priority flow control under DCB environment for Eth- ernet device. Parameters port_id The port identifier of the Ethernet device. pfc_conf The pointer to the structure of the priority flow control pa- rameters. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support priority flow control mode. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter * (-EIO) if flow control setup failure or device is removed. int rte_eth_dev_mac_addr_add (uint16_t port_id, struct rte_ether_addr * mac_addr, uint32_t pool) Add a MAC address to the set used for filtering incoming packets. Parameters port_id The port identifier of the Ethernet device. mac_addr The MAC address to add. pool VMDq pool index to associate address with (if VMDq is enabled). If VMDq is not enabled, this should be set to 0. Returns * (0) if successfully added or mac_addr was already added. * (-ENOTSUP) if hardware doesn't support this feature. * (-ENODEV) if port is invalid. * (-EIO) if device is removed. * (-ENOSPC) if no more MAC addresses can be added. * (-EINVAL) if MAC address is invalid. __rte_experimental int rte_eth_dev_priority_flow_ctrl_queue_info_get (uint16_t port_id, struct rte_eth_pfc_queue_info * pfc_queue_info) Warning EXPERIMENTAL: this API may change without prior notice. Retrieve the information for queue based PFC. Parameters port_id The port identifier of the Ethernet device. pfc_queue_info A pointer to a structure of type rte_eth_pfc_queue_info to be filled with the information about queue based PFC. Returns * (0) if successful. * (-ENOTSUP) if support for priority_flow_ctrl_queue_info_get does not exist. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. __rte_experimental int rte_eth_dev_priority_flow_ctrl_queue_configure (uint16_t port_id, struct rte_eth_pfc_queue_conf * pfc_queue_conf) Warning EXPERIMENTAL: this API may change without prior notice. Configure the queue based priority flow control for a given queue for Eth- ernet device. Note When an ethdev port switches to queue based PFC mode, the unconfigured queues shall be configured by the driver with default values such as lower priority value for TC etc. Parameters port_id The port identifier of the Ethernet device. pfc_queue_conf The pointer to the structure of the priority flow con- trol parameters for the queue. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support queue based PFC mode. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter * (-EIO) if flow control setup queue failure int rte_eth_dev_mac_addr_remove (uint16_t port_id, struct rte_ether_addr * mac_addr) Remove a MAC address from the internal array of addresses. Parameters port_id The port identifier of the Ethernet device. mac_addr MAC address to remove. Returns * (0) if successful, or mac_addr didn't exist. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port invalid. * (-EADDRINUSE) if attempting to remove the default MAC address. * (-EINVAL) if MAC address is invalid. int rte_eth_dev_default_mac_addr_set (uint16_t port_id, struct rte_ether_addr * mac_addr) Set the default MAC address. It replaces the address at index 0 of the MAC address list. If the address was already in the MAC address list, please remove it first. Parameters port_id The port identifier of the Ethernet device. mac_addr New default MAC address. Returns * (0) if successful, or mac_addr didn't exist. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port invalid. * (-EINVAL) if MAC address is invalid. * (-EEXIST) if MAC address was already in the address list. int rte_eth_dev_rss_reta_update (uint16_t port_id, struct rte_eth_rss_reta_entry64 * reta_conf, uint16_t reta_size) Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device. Parameters port_id The port identifier of the Ethernet device. reta_conf RETA to update. reta_size Redirection table size. The table size can be queried by rte_eth_dev_info_get(). Returns * (0) if successful. * (-ENODEV) if port_id is invalid. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-EIO) if device is removed. int rte_eth_dev_rss_reta_query (uint16_t port_id, struct rte_eth_rss_reta_en- try64 * reta_conf, uint16_t reta_size) Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device. Parameters port_id The port identifier of the Ethernet device. reta_conf RETA to query. For each requested reta entry, corresponding bit in mask must be set. reta_size Redirection table size. The table size can be queried by rte_eth_dev_info_get(). Returns * (0) if successful. * (-ENODEV) if port_id is invalid. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-EIO) if device is removed. int rte_eth_dev_uc_hash_table_set (uint16_t port_id, struct rte_ether_addr * addr, uint8_t on) Updates unicast hash table for receiving packet with the given destination MAC address, and the packet is routed to all VFs for which the Rx mode is accept packets that match the unicast hash table. Parameters port_id The port identifier of the Ethernet device. addr Unicast MAC address. on 1 - Set an unicast hash bit for receiving packets with the MAC ad- dress. 0 - Clear an unicast hash bit. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if bad parameter. int rte_eth_dev_uc_all_hash_table_set (uint16_t port_id, uint8_t on) Updates all unicast hash bitmaps for receiving packet with any Unicast Eth- ernet MAC addresses,the packet is routed to all VFs for which the Rx mode is accept packets that match the unicast hash table. Parameters port_id The port identifier of the Ethernet device. on 1 - Set all unicast hash bitmaps for receiving all the Ethernet MAC addresses 0 - Clear all unicast hash bitmaps Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if bad parameter. int rte_eth_set_queue_rate_limit (uint16_t port_id, uint16_t queue_idx, uint32_t tx_rate) Set the rate limitation for a queue on an Ethernet device. Parameters port_id The port identifier of the Ethernet device. queue_idx The queue ID. tx_rate The Tx rate in Mbps. Allocated from the total port link speed. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support this feature. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if bad parameter. int rte_eth_dev_rss_hash_update (uint16_t port_id, struct rte_eth_rss_conf * rss_conf) Configuration of Receive Side Scaling hash computation of Ethernet device. Parameters port_id The port identifier of the Ethernet device. rss_conf The new configuration to use for RSS hash computation on the port. Returns * (0) if successful. * (-ENODEV) if port identifier is invalid. * (-EIO) if device is removed. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. int rte_eth_dev_rss_hash_conf_get (uint16_t port_id, struct rte_eth_rss_conf * rss_conf) Retrieve current configuration of Receive Side Scaling hash computation of Ethernet device. Parameters port_id The port identifier of the Ethernet device. rss_conf Where to store the current RSS hash configuration of the Eth- ernet device. Returns * (0) if successful. * (-ENODEV) if port identifier is invalid. * (-EIO) if device is removed. * (-ENOTSUP) if hardware doesn't support RSS. * (-EINVAL) if bad parameter. __rte_experimental const char * rte_eth_dev_rss_algo_name (enum rte_eth_hash_function rss_algo) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice. Get the name of RSS hash algorithm. Parameters rss_algo Hash algorithm. Returns Hash algorithm name or 'UNKNOWN' if the rss_algo cannot be recognized. __rte_experimental int rte_eth_find_rss_algo (const char * name, uint32_t * algo) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice. Get RSS hash algorithm by its name. Parameters name RSS hash algorithm. algo Return the RSS hash algorithm found, See also rte_eth_hash_function. Returns * (0) if successful. * (-EINVAL) if not found. int rte_eth_dev_udp_tunnel_port_add (uint16_t port_id, struct rte_eth_udp_tunnel * tunnel_udp) Add UDP tunneling port for a type of tunnel. Some NICs may require such configuration to properly parse a tunnel with any standard or custom UDP port. The packets with this UDP port will be parsed for this type of tunnel. The device parser will also check the rest of the tunnel headers before classifying the packet. With some devices, this API will affect packet classification, i.e.: * mbuf.packet_type reported on Rx * rte_flow rules with tunnel items Parameters port_id The port identifier of the Ethernet device. tunnel_udp UDP tunneling configuration. Returns * (0) if successful. * (-ENODEV) if port identifier is invalid. * (-EIO) if device is removed. * (-ENOTSUP) if hardware doesn't support tunnel type. int rte_eth_dev_udp_tunnel_port_delete (uint16_t port_id, struct rte_eth_udp_tunnel * tunnel_udp) Delete UDP tunneling port for a type of tunnel. The packets with this UDP port will not be classified as this type of tun- nel anymore if the device use such mapping for tunnel packet classifica- tion. See also rte_eth_dev_udp_tunnel_port_add Parameters port_id The port identifier of the Ethernet device. tunnel_udp UDP tunneling configuration. Returns * (0) if successful. * (-ENODEV) if port identifier is invalid. * (-EIO) if device is removed. * (-ENOTSUP) if hardware doesn't support tunnel type. int rte_eth_dev_get_dcb_info (uint16_t port_id, struct rte_eth_dcb_info * dcb_info) Get DCB information on an Ethernet device. Parameters port_id The port identifier of the Ethernet device. dcb_info DCB information. Returns * (0) if successful. * (-ENODEV) if port identifier is invalid. * (-EIO) if device is removed. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. const struct rte_eth_rxtx_callback * rte_eth_add_rx_callback (uint16_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void * user_param) Add a callback to be called on packet Rx on a given port and queue. This API configures a function to be called for each burst of packets re- ceived on a given NIC port queue. The return value is a pointer that can be used to later remove the callback using rte_eth_remove_rx_callback(). Multiple functions are called in the order that they are added. Parameters port_id The port identifier of the Ethernet device. queue_id The queue on the Ethernet device on which the callback is to be added. fn The callback function user_param A generic pointer parameter which will be passed to each in- vocation of the callback function on this port and queue. Inter-thread synchronization of any user data changes is the responsibility of the user. Returns NULL on error. On success, a pointer value which can later be used to remove the callback. const struct rte_eth_rxtx_callback * rte_eth_add_first_rx_callback (uint16_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void * user_param) Add a callback that must be called first on packet Rx on a given port and queue. This API configures a first function to be called for each burst of packets received on a given NIC port queue. The return value is a pointer that can be used to later remove the callback using rte_eth_remove_rx_callback(). Multiple functions are called in the order that they are added. Parameters port_id The port identifier of the Ethernet device. queue_id The queue on the Ethernet device on which the callback is to be added. fn The callback function user_param A generic pointer parameter which will be passed to each in- vocation of the callback function on this port and queue. Inter-thread synchronization of any user data changes is the responsibility of the user. Returns NULL on error. On success, a pointer value which can later be used to remove the callback. const struct rte_eth_rxtx_callback * rte_eth_add_tx_callback (uint16_t port_id, uint16_t queue_id, rte_tx_callback_fn fn, void * user_param) Add a callback to be called on packet Tx on a given port and queue. This API configures a function to be called for each burst of packets sent on a given NIC port queue. The return value is a pointer that can be used to later remove the callback using rte_eth_remove_tx_callback(). Multiple functions are called in the order that they are added. Parameters port_id The port identifier of the Ethernet device. queue_id The queue on the Ethernet device on which the callback is to be added. fn The callback function user_param A generic pointer parameter which will be passed to each in- vocation of the callback function on this port and queue. Inter-thread synchronization of any user data changes is the responsibility of the user. Returns NULL on error. On success, a pointer value which can later be used to remove the callback. int rte_eth_remove_rx_callback (uint16_t port_id, uint16_t queue_id, const struct rte_eth_rxtx_callback * user_cb) Remove an Rx packet callback from a given port and queue. This function is used to removed callbacks that were added to a NIC port queue using rte_eth_add_rx_callback(). Note: the callback is removed from the callback list but it isn't freed since the it may still be in use. The memory for the callback can be subse- quently freed back by the application by calling rte_free(): * Immediately - if the port is stopped, or the user knows that no callbacks are in flight e.g. if called from the thread doing Rx/Tx on that queue. * After a short delay - where the delay is sufficient to allow any in- flight callbacks to complete. Alternately, the RCU mechanism can be used to detect when data plane threads have ceased referencing the callback memory. Parameters port_id The port identifier of the Ethernet device. queue_id The queue on the Ethernet device from which the callback is to be removed. user_cb User supplied callback created via rte_eth_add_rx_callback(). Returns * 0: Success. Callback was removed. * -ENODEV: If port_id is invalid. * -ENOTSUP: Callback support is not available. * -EINVAL: The queue_id is out of range, or the callback is NULL or not found for the port/queue. int rte_eth_remove_tx_callback (uint16_t port_id, uint16_t queue_id, const struct rte_eth_rxtx_callback * user_cb) Remove a Tx packet callback from a given port and queue. This function is used to removed callbacks that were added to a NIC port queue using rte_eth_add_tx_callback(). Note: the callback is removed from the callback list but it isn't freed since the it may still be in use. The memory for the callback can be subse- quently freed back by the application by calling rte_free(): * Immediately - if the port is stopped, or the user knows that no callbacks are in flight e.g. if called from the thread doing Rx/Tx on that queue. * After a short delay - where the delay is sufficient to allow any in- flight callbacks to complete. Alternately, the RCU mechanism can be used to detect when data plane threads have ceased referencing the callback memory. Parameters port_id The port identifier of the Ethernet device. queue_id The queue on the Ethernet device from which the callback is to be removed. user_cb User supplied callback created via rte_eth_add_tx_callback(). Returns * 0: Success. Callback was removed. * -ENODEV: If port_id is invalid. * -ENOTSUP: Callback support is not available. * -EINVAL: The queue_id is out of range, or the callback is NULL or not found for the port/queue. int rte_eth_rx_queue_info_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_rxq_info * qinfo) Retrieve information about given port's Rx queue. Parameters port_id The port identifier of the Ethernet device. queue_id The Rx queue on the Ethernet device for which information will be retrieved. qinfo A pointer to a structure of type rte_eth_rxq_info_info to be filled with the information of the Ethernet device. Returns * 0: Success * -ENODEV: If port_id is invalid. * -ENOTSUP: routine is not supported by the device PMD. * -EINVAL: The queue_id is out of range, or the queue is hairpin queue. int rte_eth_tx_queue_info_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_txq_info * qinfo) Retrieve information about given port's Tx queue. Parameters port_id The port identifier of the Ethernet device. queue_id The Tx queue on the Ethernet device for which information will be retrieved. qinfo A pointer to a structure of type rte_eth_txq_info_info to be filled with the information of the Ethernet device. Returns * 0: Success * -ENODEV: If port_id is invalid. * -ENOTSUP: routine is not supported by the device PMD. * -EINVAL: The queue_id is out of range, or the queue is hairpin queue. __rte_experimental int rte_eth_recycle_rx_queue_info_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_recycle_rxq_info * recycle_rxq_info) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Retrieve information about given ports's Rx queue for recycling mbufs. Parameters port_id The port identifier of the Ethernet device. queue_id The Rx queue on the Ethernet devicefor which information will be retrieved. recycle_rxq_info A pointer to a structure of type rte_eth_recy- cle_rxq_info to be filled. Returns * 0: Success * -ENODEV: If port_id is invalid. * -ENOTSUP: routine is not supported by the device PMD. * -EINVAL: The queue_id is out of range. int rte_eth_rx_burst_mode_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_burst_mode * mode) Retrieve information about the Rx packet burst mode. Parameters port_id The port identifier of the Ethernet device. queue_id The Rx queue on the Ethernet device for which information will be retrieved. mode A pointer to a structure of type rte_eth_burst_mode to be filled with the information of the packet burst mode. Returns * 0: Success * -ENODEV: If port_id is invalid. * -ENOTSUP: routine is not supported by the device PMD. * -EINVAL: The queue_id is out of range. int rte_eth_tx_burst_mode_get (uint16_t port_id, uint16_t queue_id, struct rte_eth_burst_mode * mode) Retrieve information about the Tx packet burst mode. Parameters port_id The port identifier of the Ethernet device. queue_id The Tx queue on the Ethernet device for which information will be retrieved. mode A pointer to a structure of type rte_eth_burst_mode to be filled with the information of the packet burst mode. Returns * 0: Success * -ENODEV: If port_id is invalid. * -ENOTSUP: routine is not supported by the device PMD. * -EINVAL: The queue_id is out of range. __rte_experimental int rte_eth_get_monitor_addr (uint16_t port_id, uint16_t queue_id, struct rte_power_monitor_cond * pmc) Warning EXPERIMENTAL: this API may change without prior notice. Retrieve the monitor condition for a given receive queue. Parameters port_id The port identifier of the Ethernet device. queue_id The Rx queue on the Ethernet device for which information will be retrieved. pmc The pointer to power-optimized monitoring condition structure. Returns * 0: Success. -ENOTSUP: Operation not supported. -EINVAL: Invalid para- meters. -ENODEV: Invalid port ID. __rte_experimental int rte_eth_dev_get_reg_info_ext (uint16_t port_id, struct rte_dev_reg_info * info) Retrieve the filtered device registers (values and names) and register at- tributes (number of registers and register size) Parameters port_id The port identifier of the Ethernet device. info Pointer to rte_dev_reg_info structure to fill in. * If info->filter is NULL, return info for all registers (seen as fil- ter none). * If info->filter is not NULL, return error if the driver does not sup- port filter. Fill the length field with filtered register number. * If info->data is NULL, the function fills in the width and length fields. * If info->data is not NULL, ethdev considers there are enough spaces to store the registers, and the values of registers with the filter string as the module name are put into the buffer pointed at by info->data. * If info->names is not NULL, drivers should fill it or the ethdev fills it with default names. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * others depends on the specific operations implementation. int rte_eth_dev_get_reg_info (uint16_t port_id, struct rte_dev_reg_info * info) Retrieve device registers and register attributes (number of registers and register size) Parameters port_id The port identifier of the Ethernet device. info Pointer to rte_dev_reg_info structure to fill in. If info->data is NULL the function fills in the width and length fields. If non-NULL the registers are put into the buffer pointed at by the data field. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * others depends on the specific operations implementation. int rte_eth_dev_get_eeprom_length (uint16_t port_id) Retrieve size of device EEPROM Parameters port_id The port identifier of the Ethernet device. Returns * (>=0) EEPROM size if successful. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * others depends on the specific operations implementation. int rte_eth_dev_get_eeprom (uint16_t port_id, struct rte_dev_eeprom_info * info) Retrieve EEPROM and EEPROM attribute Parameters port_id The port identifier of the Ethernet device. info The template includes buffer for return EEPROM data and EEPROM at- tributes to be filled. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * others depends on the specific operations implementation. int rte_eth_dev_set_eeprom (uint16_t port_id, struct rte_dev_eeprom_info * info) Program EEPROM with provided data Parameters port_id The port identifier of the Ethernet device. info The template includes EEPROM data for programming and EEPROM at- tributes to be filled Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. * (-EIO) if device is removed. * others depends on the specific operations implementation. __rte_experimental int rte_eth_dev_get_module_info (uint16_t port_id, struct rte_eth_dev_module_info * modinfo) Warning EXPERIMENTAL: this API may change without prior notice. Retrieve the type and size of plugin module EEPROM Parameters port_id The port identifier of the Ethernet device. modinfo The type and size of plugin module EEPROM. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. * (-EIO) if device is removed. * others depends on the specific operations implementation. __rte_experimental int rte_eth_dev_get_module_eeprom (uint16_t port_id, struct rte_dev_eeprom_info * info) Warning EXPERIMENTAL: this API may change without prior notice. Retrieve the data of plugin module EEPROM Parameters port_id The port identifier of the Ethernet device. info The template includes the plugin module EEPROM attributes, and the buffer for return plugin module EEPROM data. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * others depends on the specific operations implementation. int rte_eth_dev_set_mc_addr_list (uint16_t port_id, struct rte_ether_addr * mc_addr_set, uint32_t nb_mc_addr) Set the list of multicast addresses to filter on an Ethernet device. Parameters port_id The port identifier of the Ethernet device. mc_addr_set The array of multicast addresses to set. Equal to NULL when the function is invoked to flush the set of filtered addresses. nb_mc_addr The number of multicast addresses in the mc_addr_set array. Equal to 0 when the function is invoked to flush the set of filtered addresses. Returns * (0) if successful. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-ENOTSUP) if PMD of port_id doesn't support multicast filtering. * (-ENOSPC) if port_id has not enough multicast filtering resources. * (-EINVAL) if bad parameter. int rte_eth_timesync_enable (uint16_t port_id) Enable IEEE1588/802.1AS timestamping for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * 0: Success. * -ENODEV: The port ID is invalid. * -EIO: if device is removed. * -ENOTSUP: The function is not supported by the Ethernet driver. int rte_eth_timesync_disable (uint16_t port_id) Disable IEEE1588/802.1AS timestamping for an Ethernet device. Parameters port_id The port identifier of the Ethernet device. Returns * 0: Success. * -ENODEV: The port ID is invalid. * -EIO: if device is removed. * -ENOTSUP: The function is not supported by the Ethernet driver. int rte_eth_timesync_read_rx_timestamp (uint16_t port_id, struct timespec * timestamp, uint32_t flags) Read an IEEE1588/802.1AS Rx timestamp from an Ethernet device. Parameters port_id The port identifier of the Ethernet device. timestamp Pointer to the timestamp struct. flags Device specific flags. Used to pass the Rx timesync register in- dex to i40e. Unused in igb/ixgbe, pass 0 instead. Returns * 0: Success. * -EINVAL: No timestamp is available. * -ENODEV: The port ID is invalid. * -EIO: if device is removed. * -ENOTSUP: The function is not supported by the Ethernet driver. int rte_eth_timesync_read_tx_timestamp (uint16_t port_id, struct timespec * timestamp) Read an IEEE1588/802.1AS Tx timestamp from an Ethernet device. Parameters port_id The port identifier of the Ethernet device. timestamp Pointer to the timestamp struct. Returns * 0: Success. * -EINVAL: No timestamp is available. * -ENODEV: The port ID is invalid. * -EIO: if device is removed. * -ENOTSUP: The function is not supported by the Ethernet driver. int rte_eth_timesync_adjust_time (uint16_t port_id, int64_t delta) Adjust the timesync clock on an Ethernet device. This is usually used in conjunction with other Ethdev timesync functions to synchronize the device time using the IEEE1588/802.1AS protocol. Parameters port_id The port identifier of the Ethernet device. delta The adjustment in nanoseconds. Returns * 0: Success. * -ENODEV: The port ID is invalid. * -EIO: if device is removed. * -ENOTSUP: The function is not supported by the Ethernet driver. __rte_experimental int rte_eth_timesync_adjust_freq (uint16_t port_id, int64_t ppm) Adjust the clock frequency on an Ethernet device. Adjusts the base frequency by a specified percentage of ppm (parts per mil- lion). This is usually used in conjunction with other Ethdev timesync func- tions to synchronize the device time using the IEEE1588/802.1AS protocol. The clock is subject to frequency deviation and rate of change drift due to the environment. The upper layer APP calculates the frequency compensation value of the slave clock relative to the master clock via a servo algorithm and adjusts the device clock frequency via 'rte_eth_timesync_ad- just_freq()'. Commonly used servo algorithms are pi/linreg/ntpshm, for im- plementation see: https://github.com/nxp-archive/openil_linuxptp.git. The adjustment value obtained by the servo algorithm is usually in ppb (parts per billion). For consistency with the kernel driver .adjfine, the tuning values are in ppm. Note that 1 ppb is approximately 65.536 scaled ppm, see Linux kernel upstream commit 1060707e3809 (aptp: introduce helpers to adjust by scaled parts per milliona). In addition, the device reference frequency is usually also the stepping threshold for the servo algorithm, and the frequency up and down adjustment range is limited by the device. The device clock frequency should be ad- justed with 'rte_eth_timesync_adjust_freq()' every time the clock is syn- chronised. Also use arte_eth_timesync_adjust_time()a to update the device clock only if the absolute value of the master/slave clock offset is greater than or equal to the step threshold. Parameters port_id The port identifier of the Ethernet device. ppm Parts per million with 16-bit fractional field Returns * 0: Success. * -ENODEV: The port ID is invalid. * -EIO: if device is removed. * -ENOTSUP: The function is not supported by the Ethernet driver. int rte_eth_timesync_read_time (uint16_t port_id, struct timespec * time) Read the time from the timesync clock on an Ethernet device. This is usually used in conjunction with other Ethdev timesync functions to synchronize the device time using the IEEE1588/802.1AS protocol. Parameters port_id The port identifier of the Ethernet device. time Pointer to the timespec struct that holds the time. Returns * 0: Success. * -EINVAL: Bad parameter. int rte_eth_timesync_write_time (uint16_t port_id, const struct timespec * time) Set the time of the timesync clock on an Ethernet device. This is usually used in conjunction with other Ethdev timesync functions to synchronize the device time using the IEEE1588/802.1AS protocol. Parameters port_id The port identifier of the Ethernet device. time Pointer to the timespec struct that holds the time. Returns * 0: Success. * -EINVAL: No timestamp is available. * -ENODEV: The port ID is invalid. * -EIO: if device is removed. * -ENOTSUP: The function is not supported by the Ethernet driver. __rte_experimental int rte_eth_read_clock (uint16_t port_id, uint64_t * clock) Warning EXPERIMENTAL: this API may change without prior notice. Read the current clock counter of an Ethernet device This returns the current raw clock value of an Ethernet device. It is a raw amount of ticks, with no given time reference. The value returned here is from the same clock than the one filling timestamp field of Rx packets when using hardware timestamp offload. Therefore it can be used to compute a precise conversion of the device clock to the real time. E.g, a simple heuristic to derivate the frequency would be: uint64_t start, end; rte_eth_read_clock(port, start); rte_delay_ms(100); rte_eth_read_clock(port, end); double freq = (end - start) * 10; Compute a common reference with: uint64_t base_time_sec = current_time(); uint64_t base_clock; rte_eth_read_clock(port, base_clock); Then, convert the raw mbuf timestamp with: base_time_sec + (double)(*time- stamp_dynfield(mbuf) - base_clock) / freq; This simple example will not provide a very good accuracy. One must at least measure multiple times the frequency and do a regression. To avoid deviation from the system time, the common reference can be repeated from time to time. The integer division can also be converted by a multiplica- tion and a shift for better performance. Parameters port_id The port identifier of the Ethernet device. clock Pointer to the uint64_t that holds the raw clock value. Returns * 0: Success. * -ENODEV: The port ID is invalid. * -ENOTSUP: The function is not supported by the Ethernet driver. * -EINVAL: if bad parameter. int rte_eth_dev_get_port_by_name (const char * name, uint16_t * port_id) Get the port ID from device name. The device name should be specified as below: * PCIe address (Domain:Bus:Device.Function), for example- 0000:2:00.0 * SoC device name, for example- fsl-gmac0 * vdev dpdk name, for example- net_[pcap0|null0|tap0] Parameters name PCI address or name of the device. port_id Pointer to port identifier of the device. Returns * (0) if successful and port_id is filled. * (-ENODEV or -EINVAL) on failure. int rte_eth_dev_get_name_by_port (uint16_t port_id, char * name) Get the device name from port ID. The device name is specified as below: * PCIe address (Domain:Bus:Device.Function), for example- 0000:02:00.0 * SoC device name, for example- fsl-gmac0 * vdev dpdk name, for example- net_[pcap0|null0|tun0|tap0] Parameters port_id Port identifier of the device. name Buffer of size RTE_ETH_NAME_MAX_LEN to store the name. Returns * (0) if successful. * (-ENODEV) if port_id is invalid. * (-EINVAL) on failure. int rte_eth_dev_adjust_nb_rx_tx_desc (uint16_t port_id, uint16_t * nb_rx_desc, uint16_t * nb_tx_desc) Check that numbers of Rx and Tx descriptors satisfy descriptors limits from the Ethernet device information, otherwise adjust them to boundaries. Parameters port_id The port identifier of the Ethernet device. nb_rx_desc A pointer to a uint16_t where the number of receive descrip- tors stored. nb_tx_desc A pointer to a uint16_t where the number of transmit de- scriptors stored. Returns * (0) if successful. * (-ENOTSUP, -ENODEV or -EINVAL) on failure. int rte_eth_dev_pool_ops_supported (uint16_t port_id, const char * pool) Test if a port supports specific mempool ops. Parameters port_id Port identifier of the Ethernet device. pool The name of the pool operations to test. Returns * 0: best mempool ops choice for this port. * 1: mempool ops are supported for this port. * -ENOTSUP: mempool ops not supported for this port. * -ENODEV: Invalid port Identifier. * -EINVAL: Pool param is null. void * rte_eth_dev_get_sec_ctx (uint16_t port_id) Get the security context for the Ethernet device. Parameters port_id Port identifier of the Ethernet device Returns * NULL on error. * pointer to security context on success. __rte_experimental int rte_eth_dev_hairpin_capability_get (uint16_t port_id, struct rte_eth_hairpin_cap * cap) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Query the device hairpin capabilities. Parameters port_id The port identifier of the Ethernet device. cap Pointer to a structure that will hold the hairpin capabilities. Returns * (0) if successful. * (-ENOTSUP) if hardware doesn't support. * (-EINVAL) if bad parameter. __rte_experimental int rte_eth_representor_info_get (uint16_t port_id, struct rte_eth_representor_info * info) Retrieve the representor info of the device. Get device representor info to be able to calculate a unique representor ID. See also rte_eth_representor_id_get helper. Parameters port_id The port identifier of the device. info A pointer to a representor info structure. NULL to return number of range entries and allocate memory for next call to store detail. The number of ranges that were written into this structure will be placed into its nb_ranges field. This number cannot be larger than the nb_ranges_alloc that by the user before calling this function. It can be smaller than the value returned by the function, however. Returns * (-ENOTSUP) if operation is not supported. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (>=0) number of available representor range entries. int rte_eth_rx_metadata_negotiate (uint16_t port_id, uint64_t * features) Negotiate the NIC's ability to deliver specific kinds of metadata to the PMD. Invoke this API before the first rte_eth_dev_configure() invocation to let the PMD make preparations that are inconvenient to do later. The negotiation process is as follows: * the application requests features intending to use at least some of them; * the PMD responds with the guaranteed subset of the requested feature set; * the application can retry negotiation with another set of features; * the application can pass zero to clear the negotiation result; * the last negotiated result takes effect upon the ethdev configure and start. Note The PMD is supposed to first consider enabling the requested feature set in its entirety. Only if it fails to do so, does it have the right to respond with a smaller set of the originally requested features. Return code (-ENOTSUP) does not necessarily mean that the requested features are unsupported. In this case, the application should just as- sume that these features can be used without prior negotiations. Parameters port_id Port (ethdev) identifier features Feature selection buffer Returns * (-EBUSY) if the port can't handle this in its current state; * (-ENOTSUP) if the method itself is not supported by the PMD; * (-ENODEV) if port_id is invalid; * (-EINVAL) if features is NULL; * (-EIO) if the device is removed; * (0) on success __rte_experimental int rte_eth_ip_reassembly_capability_get (uint16_t port_id, struct rte_eth_ip_reassembly_params * capa) Warning EXPERIMENTAL: this API may change without prior notice Get IP reassembly capabilities supported by the PMD. This is the first API to be called for enabling the IP reassembly offload feature. PMD will re- turn the maximum values of parameters that PMD can support and user can call rte_eth_ip_reassembly_conf_set() with param values lower than capabil- ity. Parameters port_id The port identifier of the device. capa A pointer to rte_eth_ip_reassembly_params structure. Returns * (-ENOTSUP) if offload configuration is not supported by device. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if device is not configured or capa passed is NULL. * (0) on success. __rte_experimental int rte_eth_ip_reassembly_conf_get (uint16_t port_id, struct rte_eth_ip_reassembly_params * conf) Warning EXPERIMENTAL: this API may change without prior notice Get IP reassembly configuration parameters currently set in PMD. The API will return error if the configuration is not already set using rte_eth_ip_reassembly_conf_set() before calling this API or if the device is not configured. Parameters port_id The port identifier of the device. conf A pointer to rte_eth_ip_reassembly_params structure. Returns * (-ENOTSUP) if offload configuration is not supported by device. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if device is not configured or if conf passed is NULL or if configuration is not set using rte_eth_ip_reassembly_conf_set(). * (0) on success. __rte_experimental int rte_eth_ip_reassembly_conf_set (uint16_t port_id, const struct rte_eth_ip_reassembly_params * conf) Warning EXPERIMENTAL: this API may change without prior notice Set IP reassembly configuration parameters if the PMD supports IP reassem- bly offload. User should first call rte_eth_ip_reassembly_capability_get() to check the maximum values supported by the PMD before setting the config- uration. The use of this API is mandatory to enable this feature and should be called before rte_eth_dev_start(). In datapath, PMD cannot guarantee that IP reassembly is always successful. Hence, PMD shall register mbuf dynamic field and dynamic flag using rte_eth_ip_reassembly_dynfield_register() to denote incomplete IP reassem- bly. If dynfield is not successfully registered, error will be returned and IP reassembly offload cannot be used. Parameters port_id The port identifier of the device. conf A pointer to rte_eth_ip_reassembly_params structure. Returns * (-ENOTSUP) if offload configuration is not supported by device. * (-ENODEV) if port_id invalid. * (-EIO) if device is removed. * (-EINVAL) if device is not configured or if device is already started or if conf passed is NULL or if mbuf dynfield is not registered suc- cessfully by the PMD. * (0) on success. __rte_experimental int rte_eth_dev_priv_dump (uint16_t port_id, FILE * file) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Dump private info from device to a file. Provided data and the order de- pends on the PMD. Parameters port_id The port identifier of the Ethernet device. file A pointer to a file for output. Returns * (0) on success. * (-ENODEV) if port_id is invalid. * (-EINVAL) if null file. * (-ENOTSUP) if the device does not support this function. * (-EIO) if device is removed. __rte_experimental int rte_eth_rx_descriptor_dump (uint16_t port_id, uint16_t queue_id, uint16_t offset, uint16_t num, FILE * file) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Dump ethdev Rx descriptor info to a file. This API is used for debugging, not a dataplane API. Parameters port_id The port identifier of the Ethernet device. queue_id A Rx queue identifier on this port. offset The offset of the descriptor starting from tail. (0 is the next packet to be received by the driver). num The number of the descriptors to dump. file A pointer to a file for output. Returns * On success, zero. * On failure, a negative value. __rte_experimental int rte_eth_tx_descriptor_dump (uint16_t port_id, uint16_t queue_id, uint16_t offset, uint16_t num, FILE * file) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Dump ethdev Tx descriptor info to a file. This API is used for debugging, not a dataplane API. Parameters port_id The port identifier of the Ethernet device. queue_id A Tx queue identifier on this port. offset The offset of the descriptor starting from tail. (0 is the place where the next packet will be send). num The number of the descriptors to dump. file A pointer to a file for output. Returns * On success, zero. * On failure, a negative value. __rte_experimental int rte_eth_cman_info_get (uint16_t port_id, struct rte_eth_cman_info * info) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Retrieve the information for ethdev congestion management Parameters port_id The port identifier of the Ethernet device. info A pointer to a structure of type rte_eth_cman_info to be filled with the information about congestion management. Returns * (0) if successful. * (-ENOTSUP) if support for cman_info_get does not exist. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. __rte_experimental int rte_eth_cman_config_init (uint16_t port_id, struct rte_eth_cman_config * config) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Initialize the ethdev congestion management configuration structure with default values. Parameters port_id The port identifier of the Ethernet device. config A pointer to a structure of type rte_eth_cman_config to be ini- tialized with default value. Returns * (0) if successful. * (-ENOTSUP) if support for cman_config_init does not exist. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. __rte_experimental int rte_eth_cman_config_set (uint16_t port_id, const struct rte_eth_cman_config * config) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Configure ethdev congestion management Parameters port_id The port identifier of the Ethernet device. config A pointer to a structure of type rte_eth_cman_config to be con- figured. Returns * (0) if successful. * (-ENOTSUP) if support for cman_config_set does not exist. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. __rte_experimental int rte_eth_cman_config_get (uint16_t port_id, struct rte_eth_cman_config * config) Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Retrieve the applied ethdev congestion management parameters for the given port. Parameters port_id The port identifier of the Ethernet device. config A pointer to a structure of type rte_eth_cman_config to retrieve congestion management parameters for the given object. Application must fill all parameters except mode_param parameter in struct rte_eth_cman_config. Returns * (0) if successful. * (-ENOTSUP) if support for cman_config_get does not exist. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. static uint16_t rte_eth_rx_burst (uint16_t port_id, uint16_t queue_id, struct rte_mbuf ** rx_pkts, const uint16_t nb_pkts) [inline], [static] Retrieve a burst of input packets from a receive queue of an Ethernet de- vice. The retrieved packets are stored in rte_mbuf structures whose point- ers are supplied in the rx_pkts array. The rte_eth_rx_burst() function loops, parsing the Rx ring of the receive queue, up to nb_pkts packets, and for each completed Rx descriptor in the ring, it performs the following operations: * Initialize the rte_mbuf data structure associated with the Rx descriptor according to the information provided by the NIC into that Rx descriptor. * Store the rte_mbuf data structure into the next entry of the rx_pkts ar- ray. * Replenish the Rx descriptor with a new rte_mbuf buffer allocated from the memory pool associated with the receive queue at initialization time. When retrieving an input packet that was scattered by the controller into multiple receive descriptors, the rte_eth_rx_burst() function appends the associated rte_mbuf buffers to the first buffer of the packet. The rte_eth_rx_burst() function returns the number of packets actually re- trieved, which is the number of rte_mbuf data structures effectively sup- plied into the rx_pkts array. A return value equal to nb_pkts indicates that the Rx queue contained at least rx_pkts packets, and this is likely to signify that other received packets remain in the input queue. Applications implementing a 'retrieve as much received packets as possible' policy can check this specific case and keep invoking the rte_eth_rx_burst() function until a value less than nb_pkts is returned. This receive method has the following advantages: * It allows a run-to-completion network stack engine to retrieve and to im- mediately process received packets in a fast burst-oriented approach, avoiding the overhead of unnecessary intermediate packet queue/dequeue operations. * Conversely, it also allows an asynchronous-oriented processing method to retrieve bursts of received packets and to immediately queue them for further parallel processing by another logical core, for instance. How- ever, instead of having received packets being individually queued by the driver, this approach allows the caller of the rte_eth_rx_burst() func- tion to queue a burst of retrieved packets at a time and therefore dra- matically reduce the cost of enqueue/dequeue operations per packet. * It allows the rte_eth_rx_burst() function of the driver to take advantage of burst-oriented hardware features (CPU cache, prefetch instructions, and so on) to minimize the number of CPU cycles per packet. To summarize, the proposed receive API enables many burst-oriented opti- mizations in both synchronous and asynchronous packet processing environ- ments with no overhead in both cases. Note Some drivers using vector instructions require that nb_pkts is divisi- ble by 4 or 8, depending on the driver implementation. The rte_eth_rx_burst() function does not provide any error notification to avoid the corresponding overhead. As a hint, the upper-level application might check the status of the device link once being systematically re- turned a 0 value for a given number of tries. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the receive queue from which to retrieve input packets. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). rx_pkts The address of an array of pointers to rte_mbuf structures that must be large enough to store nb_pkts pointers in it. nb_pkts The maximum number of packets to retrieve. The value must be divisible by 8 in order to work with any driver. Returns The number of packets actually retrieved, which is the number of point- ers to rte_mbuf structures effectively supplied to the rx_pkts array. Definition at line 6348 of file rte_ethdev.h. static int rte_eth_rx_queue_count (uint16_t port_id, uint16_t queue_id) [in- line], [static] Get the number of used descriptors of a Rx queue Since it's a dataplane function, no check is performed on port_id and queue_id. The caller must therefore ensure that the port is enabled and the queue is configured and running. Parameters port_id The port identifier of the Ethernet device. queue_id The queue ID on the specific port. Returns The number of used descriptors in the specific queue, or: * (-ENODEV) if port_id is invalid. * (-EINVAL) if queue_id is invalid * (-ENOTSUP) if the device does not support this function Definition at line 6426 of file rte_ethdev.h. static int rte_eth_rx_descriptor_status (uint16_t port_id, uint16_t queue_id, uint16_t offset) [inline], [static] Check the status of a Rx descriptor in the queue It should be called in a similar context than the Rx function: * on a dataplane core * not concurrently on the same queue Since it's a dataplane function, no check is performed on port_id and queue_id. The caller must therefore ensure that the port is enabled and the queue is configured and running. Note: accessing to a random descriptor in the ring may trigger cache misses and have a performance impact. Parameters port_id A valid port identifier of the Ethernet device which. queue_id A valid Rx queue identifier on this port. offset The offset of the descriptor starting from tail (0 is the next packet to be received by the driver). Returns * (RTE_ETH_RX_DESC_AVAIL): Descriptor is available for the hardware to receive a packet. * (RTE_ETH_RX_DESC_DONE): Descriptor is done, it is filled by hw, but not yet processed by the driver (i.e. in the receive queue). * (RTE_ETH_RX_DESC_UNAVAIL): Descriptor is unavailable, either hold by the driver and not yet returned to hw, or reserved by the hw. * (-EINVAL) bad descriptor offset. * (-ENOTSUP) if the device does not support this function. * (-ENODEV) bad port or queue (only if compiled with debug). Definition at line 6496 of file rte_ethdev.h. static int rte_eth_tx_descriptor_status (uint16_t port_id, uint16_t queue_id, uint16_t offset) [inline], [static] Check the status of a Tx descriptor in the queue. It should be called in a similar context than the Tx function: * on a dataplane core * not concurrently on the same queue Since it's a dataplane function, no check is performed on port_id and queue_id. The caller must therefore ensure that the port is enabled and the queue is configured and running. Note: accessing to a random descriptor in the ring may trigger cache misses and have a performance impact. Parameters port_id A valid port identifier of the Ethernet device which. queue_id A valid Tx queue identifier on this port. offset The offset of the descriptor starting from tail (0 is the place where the next packet will be send). Returns * (RTE_ETH_TX_DESC_FULL) Descriptor is being processed by the hw, i.e. in the transmit queue. * (RTE_ETH_TX_DESC_DONE) Hardware is done with this descriptor, it can be reused by the driver. * (RTE_ETH_TX_DESC_UNAVAIL): Descriptor is unavailable, reserved by the driver or the hardware. * (-EINVAL) bad descriptor offset. * (-ENOTSUP) if the device does not support this function. * (-ENODEV) bad port or queue (only if compiled with debug). Definition at line 6565 of file rte_ethdev.h. static uint16_t rte_eth_tx_burst (uint16_t port_id, uint16_t queue_id, struct rte_mbuf ** tx_pkts, uint16_t nb_pkts) [inline], [static] Send a burst of output packets on a transmit queue of an Ethernet device. The rte_eth_tx_burst() function is invoked to transmit output packets on the output queue queue_id of the Ethernet device designated by its port_id. The nb_pkts parameter is the number of packets to send which are supplied in the tx_pkts array of rte_mbuf structures, each of them allocated from a pool created with rte_pktmbuf_pool_create(). The rte_eth_tx_burst() func- tion loops, sending nb_pkts packets, up to the number of transmit descrip- tors available in the Tx ring of the transmit queue. For each packet to send, the rte_eth_tx_burst() function performs the following operations: * Pick up the next available descriptor in the transmit ring. * Free the network buffer previously sent with that descriptor, if any. * Initialize the transmit descriptor with the information provided in the *rte_mbuf data structure. In the case of a segmented packet composed of a list of rte_mbuf buffers, the rte_eth_tx_burst() function uses several transmit descriptors of the ring. The rte_eth_tx_burst() function returns the number of packets it actually sent. A return value equal to nb_pkts means that all packets have been sent, and this is likely to signify that other output packets could be im- mediately transmitted again. Applications that implement a 'send as many packets to transmit as possible' policy can check this specific case and keep invoking the rte_eth_tx_burst() function until a value less than nb_pkts is returned. It is the responsibility of the rte_eth_tx_burst() function to transpar- ently free the memory buffers of packets previously sent. This feature is driven by the tx_free_thresh value supplied to the rte_eth_dev_configure() function at device configuration time. When the number of free Tx descrip- tors drops below this threshold, the rte_eth_tx_burst() function must [at- tempt to] free the rte_mbuf buffers of those packets whose transmission was effectively completed. If the PMD is RTE_ETH_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can invoke this function concurrently on the same Tx queue without SW lock. See also rte_eth_dev_info_get, struct rte_eth_txconf::offloads rte_eth_tx_prepare to perform some prior checks or adjustments for of- floads. Note This function must not modify mbufs (including packets data) unless the refcnt is 1. An exception is the bonding PMD, which does not have 'Tx prepare' support, in this case, mbufs may be modified. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the transmit queue through which output packets must be sent. The value must be in the range [0, nb_tx_queue - 1] pre- viously supplied to rte_eth_dev_configure(). tx_pkts The address of an array of nb_pkts pointers to rte_mbuf struc- tures which contain the output packets. nb_pkts The maximum number of packets to transmit. Returns The number of output packets actually stored in transmit descriptors of the transmit ring. The return value can be less than the value of the tx_pkts parameter when the transmit ring is full or has been filled up. Definition at line 6687 of file rte_ethdev.h. static uint16_t rte_eth_tx_prepare (uint16_t port_id, uint16_t queue_id, struct rte_mbuf ** tx_pkts, uint16_t nb_pkts) [inline], [static] Process a burst of output packets on a transmit queue of an Ethernet de- vice. The rte_eth_tx_prepare() function is invoked to prepare output packets to be transmitted on the output queue queue_id of the Ethernet device desig- nated by its port_id. The nb_pkts parameter is the number of packets to be prepared which are supplied in the tx_pkts array of rte_mbuf structures, each of them allocated from a pool created with rte_pktmbuf_pool_create(). For each packet to send, the rte_eth_tx_prepare() function performs the following operations: * Check if packet meets devices requirements for Tx offloads. * Check limitations about number of segments. * Check additional requirements when debug is enabled. * Update and/or reset required checksums when Tx offload is set for packet. Since this function can modify packet data, provided mbufs must be safely writable (e.g. modified data cannot be in shared segment). The rte_eth_tx_prepare() function returns the number of packets ready to be sent. A return value equal to nb_pkts means that all packets are valid and ready to be sent, otherwise stops processing on the first invalid packet and leaves the rest packets untouched. When this functionality is not implemented in the driver, all packets are are returned untouched. Parameters port_id The port identifier of the Ethernet device. The value must be a valid port ID. queue_id The index of the transmit queue through which output packets must be sent. The value must be in the range [0, nb_tx_queue - 1] pre- viously supplied to rte_eth_dev_configure(). tx_pkts The address of an array of nb_pkts pointers to rte_mbuf struc- tures which contain the output packets. nb_pkts The maximum number of packets to process. Returns The number of packets correct and ready to be sent. The return value can be less than the value of the tx_pkts parameter when some packet doesn't meet devices requirements with rte_errno set appropriately: * EINVAL: offload flags are not correctly set * ENOTSUP: the offload feature is not supported by the hardware * ENODEV: if port_id is invalid (with debug enabled only) Definition at line 6804 of file rte_ethdev.h. static uint16_t rte_eth_tx_buffer_flush (uint16_t port_id, uint16_t queue_id, struct rte_eth_dev_tx_buffer * buffer) [inline], [static] Send any packets queued up for transmission on a port and HW queue This causes an explicit flush of packets previously buffered via the rte_eth_tx_buffer() function. It returns the number of packets successfully sent to the NIC, and calls the error callback for any unsent packets. Un- less explicitly set up otherwise, the default callback simply frees the un- sent packets back to the owning mempool. Parameters port_id The port identifier of the Ethernet device. queue_id The index of the transmit queue through which output packets must be sent. The value must be in the range [0, nb_tx_queue - 1] pre- viously supplied to rte_eth_dev_configure(). buffer Buffer of packets to be transmit. Returns The number of packets successfully sent to the Ethernet device. The er- ror callback is called for any packets which could not be sent. Definition at line 6888 of file rte_ethdev.h. static __rte_always_inline uint16_t rte_eth_tx_buffer (uint16_t port_id, uint16_t queue_id, struct rte_eth_dev_tx_buffer * buffer, struct rte_mbuf * tx_pkt) [static] Buffer a single packet for future transmission on a port and queue This function takes a single mbuf/packet and buffers it for later transmis- sion on the particular port and queue specified. Once the buffer is full of packets, an attempt will be made to transmit all the buffered packets. In case of error, where not all packets can be transmitted, a callback is called with the unsent packets as a parameter. If no callback is explicitly set up, the unsent packets are just freed back to the owning mempool. The function returns the number of packets actually sent i.e. 0 if no buffer flush occurred, otherwise the number of packets successfully flushed Parameters port_id The port identifier of the Ethernet device. queue_id The index of the transmit queue through which output packets must be sent. The value must be in the range [0, nb_tx_queue - 1] pre- viously supplied to rte_eth_dev_configure(). buffer Buffer used to collect packets to be sent. tx_pkt Pointer to the packet mbuf to be sent. Returns 0 = packet has been buffered for later transmission N > 0 = packet has been buffered, and the buffer was subsequently flushed, causing N pack- ets to be sent, and the error callback to be called for the rest. Definition at line 6941 of file rte_ethdev.h. static __rte_experimental uint16_t rte_eth_recycle_mbufs (uint16_t rx_port_id, uint16_t rx_queue_id, uint16_t tx_port_id, uint16_t tx_queue_id, struct rte_eth_recycle_rxq_info * recycle_rxq_info) [inline], [static] Warning EXPERIMENTAL: this API may change, or be removed, without prior notice Recycle used mbufs from a transmit queue of an Ethernet device, and move these mbufs into a mbuf ring for a receive queue of an Ethernet device. This can bypass mempool path to save CPU cycles. The rte_eth_recycle_mbufs() function loops, with rte_eth_rx_burst() and rte_eth_tx_burst() functions, freeing Tx used mbufs and replenishing Rx de- scriptors. The number of recycling mbufs depends on the request of Rx mbuf ring, with the constraint of enough used mbufs from Tx mbuf ring. For each recycling mbufs, the rte_eth_recycle_mbufs() function performs the following operations: * Copy used rte_mbuf buffer pointers from Tx mbuf ring into Rx mbuf ring. * Replenish the Rx descriptors with the recycling rte_mbuf mbufs freed from the Tx mbuf ring. This function spilts Rx and Tx path with different callback functions. The callback function recycle_tx_mbufs_reuse is for Tx driver. The callback function recycle_rx_descriptors_refill is for Rx driver. rte_eth_recy- cle_mbufs() can support the case that Rx Ethernet device is different from Tx Ethernet device. It is the responsibility of users to select the Rx/Tx queue pair to recycle mbufs. Before call this function, users must call rte_eth_recy- cle_rxq_info_get function to retrieve selected Rx queue information. See also rte_eth_recycle_rxq_info_get, struct rte_eth_recycle_rxq_info Currently, the rte_eth_recycle_mbufs() function can support to feed 1 Rx queue from 2 Tx queues in the same thread. Do not pair the Rx queue and Tx queue in different threads, in order to avoid memory error rewriting. Parameters rx_port_id Port identifying the receive side. rx_queue_id The index of the receive queue identifying the receive side. The value must be in the range [0, nb_rx_queue - 1] previously supplied to rte_eth_dev_configure(). tx_port_id Port identifying the transmit side. tx_queue_id The index of the transmit queue identifying the transmit side. The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_configure(). recycle_rxq_info A pointer to a structure of type rte_eth_recy- cle_rxq_info which contains the information of the Rx queue mbuf ring. Returns The number of recycling mbufs. Definition at line 7006 of file rte_ethdev.h. __rte_experimental int rte_eth_buffer_split_get_supported_hdr_ptypes (uint16_t port_id, uint32_t * ptypes, int num) Warning EXPERIMENTAL: this API may change without prior notice Get supported header protocols to split on Rx. When a packet type is announced to be split, it must be supported by the PMD. For instance, if eth-ipv4, eth-ipv4-udp is announced, the PMD must re- turn the following packet types for these packets: * Ether/IPv4 -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4 * Ether/IPv4/UDP -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4 | RTE_PTYPE_L4_UDP Parameters port_id The port identifier of the device. ptypes An array pointer to store supported protocol headers, allocated by caller. These ptypes are composed with RTE_PTYPE_*. num Size of the array pointed by param ptypes. Returns * (>=0) Number of supported ptypes. If the number of types exceeds num, only num entries will be filled into the ptypes array, but the full count of supported ptypes will be returned. * (-ENOTSUP) if header protocol is not supported by device. * (-ENODEV) if port_id invalid. * (-EINVAL) if bad parameter. static __rte_experimental int rte_eth_tx_queue_count (uint16_t port_id, uint16_t queue_id) [inline], [static] Warning EXPERIMENTAL: this API may change, or be removed, without prior notice. Get the number of used descriptors of a Tx queue. This function retrieves the number of used descriptors of a transmit queue. Applications can use this API in the fast path to inspect Tx queue occu- pancy and take appropriate actions based on the available free descriptors. An example action could be implementing Random Early Discard (RED). Since it's a fast-path function, no check is performed on port_id and queue_id. The caller must therefore ensure that the port is enabled and the queue is configured and running. Parameters port_id The port identifier of the device. queue_id The index of the transmit queue. The value must be in the range [0, nb_tx_queue - 1] previously supplied to rte_eth_dev_config- ure(). Returns The number of used descriptors in the specific queue, or: * (-ENODEV) if port_id is invalid. Enabled only when RTE_ETHDEV_DE- BUG_TX is enabled. * (-EINVAL) if queue_id is invalid. Enabled only when RTE_ETHDEV_DE- BUG_TX is enabled. * (-ENOTSUP) if the device does not support this function. Note This function is designed for fast-path use. There is no requirement to call this function before rte_eth_tx_burst() invocation. Utilize this function exclusively when the caller needs to determine the used queue count across all descriptors of a Tx queue. If the use case only involves checking the status of a specific descriptor slot, opt for rte_eth_tx_descriptor_status() instead. Definition at line 7146 of file rte_ethdev.h. Author Generated automatically by Doxygen for DPDK from the source code. Version 25.11.0 Thu Aug 27 2026 rte_ethdev.h(3)
NAME | SYNOPSIS | Detailed Description | Macro Definition Documentation | Typedef Documentation | Enumeration Type Documentation | Function Documentation | Author
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=rte_eth_add_first_rx_callback&sektion=3&manpath=FreeBSD+Ports+15.1.quarterly>