FreeBSD Manual Pages
SANDBOXFS(1) General Commands Manual SANDBOXFS(1) NAME sandboxfs -- A virtual file system for sandboxing SYNOPSIS sandboxfs [--allow who] [--cpu_profile path] [--input path] [--help] [--mapping type:mapping:target] [--node_cache] [--output path] [--reconfig_threads count] [--ttl duration] [--version] [--xattrs] mount_point DESCRIPTION sandboxfs is a FUSE file system that exposes a combination of multiple files and directories from the host's file system in the form of a virtual tree with an arbitrary layout. You can think of a sandbox as an arbitrary view into the host's file system with different access privileges per di- rectory. sandboxfs is designed to allow running commands with limited access to the file system by using the virtual tree as their new root, and to do so con- sistently across a variety of platforms. The sandbox instance mounted at mount_point is initially configured with the mapping specifications provided via repeated instances of --mapping. Once running, the mount point can be reconfigured any number of times: sandboxfs listens for reconfiguration requests on the file specified by --input and reconfigures the mappings as requested, emiting a response on the file specified by --output. The following flags are recognized: --allow who Specifies who should have access to the file system. who must be one of: `other' to indicate that everyone, including root, can access the file system; `root' to indicate that only the current user and root can access the file system; and `self' to indicate that only the cur- rent user can access the file system. The default value is `self' because the standard FUSE configuration does not allow more relaxed permissions, and it would be a pity if you couldn't run sandboxfs successfully without additional configura- tion. To change this behavior, add `user_allow_other' to /etc/fuse.conf on Linux or set the `vfs.generic.osxfuse.tunables.allow_other' sysctl(8) tunable to 1 on macOS. Note that, at least on macOS, you will need to consider granting `other' permissions if you intend to run signed binaries through the sandbox. This is because the amfid(8) daemon, which implements the signature validation, runs as a different user and must be able to access the executables. --cpu_profile path Enables CPU profiling and stores the pprof log to the given path. This feature is only available if sandboxfs was built with gperftools support (i.e. with the compile-time `profiler' feature). Passing this flag when support is not enabled results in an error. --input path Points to the file from which to read new configuration requests, or `-' (the default) for stdin. See the "Reconfigurations" subsection for details on the contents and behavior of the input file. --help Prints global help details and exits. Specifying this flag causes all other valid flags and arguments to be ignored. --mapping type:mapping:target Registers a new mapping. This flag can be given an arbitrary number of times as long as the same mapping is not repeated. See the "Mapping specifications" subsection for details on how a mapping is specified. --node_cache Enables the path-based node cache, which causes nodes to be reused across reconfigurations when they map to the same underlying paths. This should offer a performance boost when the same set of files are mapped over and over again across different reconfiguration opera- tions. This cache used to be enabled by default but it turned out to be problematic. For example, on macOS, OSXFUSE seems to keep track of the path where a node first appeared, which causes trouble if the node disappears and then reappears in a different location (for exam- ple, dladdr(3) returns invalid paths). For this reason, the cache is now disabled by default but is still kept around in the code for ex- perimentation. The cache may be removed in a future release altogether if these problems cannot be worked around. --output path Points to the file to which to write confirmations of reconfigura- tion, or `-' (the default) for stdout. See the "Reconfigurations" subsection for details on the contents and behavior of the output file. --ttl duration Specifies how long the kernel is allowed to cache file metadata for. The duration is currently specified as a number of seconds followed by the `s' suffix. --reconfig_threads count Sets the number of threads to use to process reconfiguration re- quests. Defaults to the number of logical CPUs in the system. --version Prints version information and exits. Specifying this flag causes all other valid flags and arguments to be ignored except for --help, which has priority over this one. The first line printed to stdout is machine parseable and follows the following structure: sandboxfs MAJOR.MINOR[.ADDITIONAL OPTIONAL QUALIFIERS] Programs automating invocations of sandboxfs can use this information to determine the correct command-line syntax to use. --xattrs Enables support for extended attributes, which causes all extended attribute operations to propagate to the underlying files. When disabled (the default), the behavior of extended attribute oper- ations is platform-dependent: they may either fail as not supported or they may act as no-op stubs. The reason is that this feature is disabled by telling the kernel that none of these operations are im- plemented in sandboxfs, which then causes the kernel to never contact the daemon for them. Keeping extended attributes disabled can result in a performance boost. Mapping specifications The basic concept behind a sandboxfs instance is the mapping specification. A mapping specification defines how an arbitrary location within the sand- box relates to another arbitrary location on the host file system. Mapping specifications have three components: the target, which is a path to a file or directory into the host file system (i.e. outside of the mount point); the mapping, which is an absolute path within the mount point in which the target is exposed; and the type, which specifies the permissions of the mapping. The target must exist but the mapping may not: in particular, any path sub- components of the mapping that have not been previously mapped within the sandbox will be created as virtual read-only nodes. This means that the ordering of the mappings matters. For example: consider a sandboxfs instance mounted onto /mnt that maps /my/custom/bin to the /usr/bin target. With this setup, /mnt/my/custom/bin will expose the contents of the real /usr/bin directory. The following types are currently supported: ro A read-only mapping. The contents of the target are exposed verbatim at the mapping point and they cannot be modified through the mount point. Any write access will result in an EPERM. rw A read/write mapping. The contents of the target are exposed verba- tim at the mapping point and they can be modified at will through the mount point. Writes through the moint point are applied immediately to the underlying target directory. Reconfigurations While a mount point is live, sandboxfs listens for reconfiguration requests on the file specified by --input and writes reconfiguration responses to the file specified by --output. These two files essentially implement a rudimentary RPC system subject to change. The mount point can be configured any number of times while mounted, which allows for processes to efficiently change the view of the sandbox at will without having to remount it. Closing the input file causes sandboxfs to freeze its configuration and not accept any more requests for reconfigura- tion, but the file system will continue to operate normally until it is ei- ther unmounted or signaled. Reconfiguration requests can be issued at any time. However, it is impos- sible for sandboxfs to properly deal with ongoing file system operations or with open file handles in a deterministic manner. Due to this, the behav- ior of ongoing file system activity while a reconfiguration happens is un- specified but can be assumed to be stable (i.e. sandboxfs will not dead- lock nor crash). As a result, it is highly recommended that you only send reconfiguration requests when you know that the file system is quiescent. Configuration requests are provided as a stream of JSON objects. Each re- quest is an object with just one of the following keys: `CreateSandbox', which requests the creation of a new top-level directory with a given set of mappings; and `DestroySandbox', which requests the deletion of the map- pings at an existing top-level directory. A `CreateSandbox' operation contains an object with three keys: `id' speci- fies the name of the top-level directory to create, `mappings' contains an array of all mappings to apply within that directory, and `prefixes' con- tains a dictionary of all new prefixes to register for prefix-encoded paths. Each mapping entry is an object with the following keys: `path' and `underlying_path', which define the mapping paths; `path_prefix' and `underlying_path_prefix', which identify the prefixes for the provided paths, respectively; and `writable', which if set to true indicates a read/write mapping. The mapping must not yet exist in the file system. Each entry in the prefixes dictionary is keyed by the numerical identifier of the prefix (supplied as a string due to JSON limitations), and the value is the absolute path for that prefix. Prefix-encoded paths serve to minimize the size of the requests but their use is optional. To specify a path in its prefix-encoded form, `path' and/or `underlying_path' must be relative and `path_prefix' and/or `underlying_path_prefix' must indicate a positive non-zero integer. The referenced prefix must be registered in the same request or a previous re- quest, but if the prefix is repeated across requests, it must point to the same location. To avoid prefix-encoded form, paths must be given as ab- solute and they need to reference the special prefix 0. A `DestroySandbox' operation simply contains the `id' of a previously-cre- ated sandbox as a string. The whole tree hierarchy is unmapped. Each configuration request is paired with a response, which are also pro- vided as a stream of JSON objects. Each response is a map with an optional field, which corresponds to the identifier given in the request, and an op- tional `error' field, which is empty if the request was successful and con- tains an error message otherwise. Responses with a missing identifier in- dicate fatal failures during the reconfiguration (e.g. due to a syntax er- ror) and are not recoverable. To minimize the size of the requests, all fields support aliases and de- fault values as follows: `CreateSandbox' Alias: `C'. `DestroySandbox' Alias: `D'. `id' Alias: `i'. `mappings' Alias: `m'. Default value: empty array. `prefixes' Alias: `q'. Default value: empty object. `path' Alias: `p'. `path_prefix' Alias: `x'. Default value: `0'. `underlying_path' Alias: `u'. `underlying_path_prefix' Alias: `y'. Default value: `0'. `writable' Alias: `w'. Default value: `false'. EXIT STATUS sandboxfs exits with 0 if the file system was both mounted and unmounted cleanly; 1 on a controlled error condition encountered during the execution of a command; or 2 on a usage error. Sending a termination signal to sandboxfs will cause the file system to exit in a controlled manner, ensuring that the mount point is released. If the file system is busy, the signal will be queued until all open file de- scriptors on the file system are released at which point the file system will try to exit cleanly again. Note that, due to limitations in signal handling in Rust (which is the language in which sandboxfs is implemented), the reception of a signal will cause sandboxfs to return 1 instead of ter- minating with a signal condition. ENVIRONMENT sandboxfs recognizes the following environment variables: RUST_LOG Sets the maximum level of logging messages sent to stderr. Possible values include `error', `warn', `info' and `debug', though many more syntaxes are supported. See the documentation for Rust's `env_logger' crate for more details. sandboxfs may recognize other standard Rust variables like RUST_BACKTRACE but the list above attempts to describe the ones a user may find most use- ful. EXAMPLES Command-line invocation This example configures a sandbox that maps the whole host's file system but clears /tmp to point into a sandbox-specific writable directory: sandboxfs --mapping=ro:/:/ --mapping=rw:/tmp:/tmp/fresh-tmp /mnt Reconfiguration request This example creates a new sandbox under /first with a single mapping that will appear as /first/tmp and that is mapped to /tmp/abc; then deletes said sandbox, and then creates a different sandbox under /second with a single mapping that will appear as /foo/bar and that is mapped to /tmp/x/y: [ {"CreateSandbox": { "id": "first", "mappings": [ {"path": "/tmp", "underlying_path": "/tmp/abc", "writable": true} ] }}, {"DestroySandbox": "first"} {"CreateSandbox": { "id": "second", "mappings": [ {"path": "/foo/bar", "underlying_path": "/tmp/x/y", "writable": false} ] }} ] When sending this request, we obtain the following response: {"id": "first", "error": null} {"id": "first", "error": null} {"id": "second", "error": null} Prefix-encoded reconfiguration request This example is the same as above, but this time using prefix-encoded paths: [ {"CreateSandbox": { "id": "first", "mappings": [ {"path": "", "path_prefix": 1, "underlying_path": "abc", "underlying_path_prefix": 1, "writable": true} ], "prefixes": { "1": "/tmp" } }}, {"DestroySandbox": "first"} {"CreateSandbox": { "id": "second", "mappings": [ {"path": "bar", "path_prefix": 2, "underlying_path": "x/y", "underlying_path_prefix": 1, "writable": false} ], "prefixes": { "2": "/foo" } }} ] Minimized reconfiguraton request This example is the same as above, but this time using field aliases and default values to minimize the message: [ {"C": { "i": "first", "m": [ {"p": "", "x": 1, "u": "abc", "y": 1, "w": true} ], "q": { "1": "/tmp" } }}, {"D": "first"} {"C": { "i": "second", "m": [ {"p": "bar", "x": 2, "u": "x/y", "y": 1} ], "q": { "2": "/foo" } }} ] AUTHORS The sandboxfs was originally developed as a Go program by Pallav Agarwal <pallavag@google.com> with guidance from Julio Merino <jmmv@google.com>. The program was later reimplemented in Rust by the latter. BUGS The following are known limitations of sandboxfs: * Hard links are not supported. * Mapping the same external file or directory under two different loca- tions within the mount point results in undefined behavior. Writes may not be reflected at both mapped locations at the same time, which can lead to data corruption. This is true even for read-only mappings be- cause each separate view within the mount point may have cached differ- ent contents, returning different data than what's truly on disk. Us- ing --node_cache may help mitigate this issue but it doesn't always do. * The --allow root setting does not work on Linux; use --allow other as the alternative. See https://github.com/bazil/fuse/issues/144 for de- tails. * It is currently impossible to terminate sandboxfs cleanly while the file system is busy. Signals received while the file system is in use will be queued as described in "EXIT STATUS" and fatal signals will cause sandboxfs to leak the mount point (possibly irrecoverably without a reboot because of kernel bugs). * Any explicitly-mapped directories and any scaffold directories (those directories that appear to represent intermediate path components that do not exist anywhere else in the file system) cannot be removed. At- tempts to remove them will result in a "permission denied" error. While it could be possible to implement some different behavior, this is what sandboxfs currently exposes. You may or may not consider this to be a bug. * If --node_cache is enabled, node data is cached in-memory for all files accessed through a sandboxfs instance in order to offer good perfor- mance across reconfigurations. However, this cache does not currently implement any expiration policy, which means that memory usage can grow unboundedly if many different files are mapped and accessed through the sandbox. * If a FIFO is used for -input, sandboxfs will block until a separate process opens the FIFO for writing. This happens even before the file system starts serving, which means the file system is not usable until the FIFO is opened. * While it is possible to reconfigure the entries of the root directory of a running file system, it is not possible to reconfigure the root mapping itself to point to a different location or to change its writability properties. * Unmapping entries doesn't fully work. The FUSE library that sandboxfs currently uses does not support sending cache invalidation requests to the kernel, which means unmapped entries will not vanish immediately from the file system. You may be able to mitigate this by setting a low node TTL with the --ttl flag, but this doesn't work on macOS either because OSXFUSE does not honor node TTLs. * Handling of extended attributes on open-but-deleted-files does not work properly. Those files will appear as if they didn't have any extended attributes any longer, and attempts to modify them will fail. FreeBSD ports 15.quarterly March 11, 2020 SANDBOXFS(1)
NAME | SYNOPSIS | DESCRIPTION | EXIT STATUS | ENVIRONMENT | EXAMPLES | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sandboxfs&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>