Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sane-leo(5)		 SANE Scanner Access Now Easy		   sane-leo(5)

NAME
       sane-leo	- SANE backend for LEO Technologies scanners

DESCRIPTION
       The  sane-leo library implements	a SANE (Scanner	Access Now Easy) back-
       end that	provides access	to some	LEO SCSI flatbed scanners. This	 back-
       end  should be considered beta-quality software!	LEO scanners were also
       sold under the Across Technologies brand.

       The scanners that should	work with this backend are:

		 Vendor	Model		status
	      ----------------------  -----------
		Across FS-1130		tested
		LEO S3			tested

       The options the backend supports	can either be selected through command
       line options to programs	like scanimage(1) or through GUI  elements  in
       xscanimage(1) or	xsane(1).

       If  you	have  any strange behavior, please report to the backend main-
       tainer or to the	SANE mailing list.

       Valid command line options and their syntax can be listed by using
	      scanimage	--help -d leo

       Scan Mode

       --mode selects the basic	 mode  of  operation  of  the  scanner.	 Valid
	      choices  are  Black  &  White, Grayscale and Color.  The Black &
	      White mode is black and white only (1 bit).  Grayscale mode will
	      produce 256 levels of gray (8 bits).  Color mode will produce  a
	      24 bit color image.

       --resolution
	      selects  the resolution for a scan. The scanner can do all reso-
	      lutions between 1	and 300, in increments of 1.

       Geometry	options

       -l -t -x	-y
	      control the scan area: -l	sets the top left x coordinate,	-t the
	      top left y coordinate, -x	selects	the width and -y the height of
	      the scan area. All parameters are	specified  in  millimeters  by
	      default.

       Enhancement options

       --custom-gamma
	      (grayscale  and  color  mode  only) allows the user to specify a
	      gamma table (see the next	3 parameters).

       --red-gamma-table
	      (color mode only)	can be used to download	a user	defined	 gamma
	      table for	the red	channel. The table must	be 256 bytes long.

       --green-gamma-table
	      (color  mode  only) can be used to download a user defined gamma
	      table for	the green channel. The table must be 256 bytes long.

       --blue-gamma-table
	      (color mode only)	can be used to download	a user	defined	 gamma
	      table for	the blue channel. The table must be 256	bytes long.

       --halftone
	      (Black  &	 White only) select the	halftone mask to use. Possible
	      values are Diamond, 8x8 Coarse Fatting, 8x8  Fine	 Fatting,  8x8
	      Bayer and	8x8 Vertical Line.

       --preview
	      requests a preview scan. The resolution used for that scan is 28
	      dpi  and	the scan area is the maximum allowed. The scan mode is
	      user selected. The default is "no".

CONFIGURATION FILE
       The configuration file /usr/local/etc/sane.d/leo.conf supports only one
       information: the	device name to use (eg /dev/scanner).

FILES
       /usr/local/lib/sane/libsane-leo.a
	      The static library implementing this backend.

       /usr/local/lib/sane/libsane-leo.so
	      The shared library implementing this backend (present on systems
	      that support dynamic loading).

ENVIRONMENT
       SANE_DEBUG_LEO
	      If the library was compiled with debug support enabled, this en-
	      vironment	variable controls the debug level  for	this  backend.
	      E.g.,  a	value  of 128 requests all debug output	to be printed.
	      Smaller levels reduce verbosity.

LIMITATIONS
       The windows TWAIN driver	has many more options than this	SANE  backend.
       However	they  are  only	software adjustments. This backend only	imple-
       ments what the scanner can support.

BUGS
       None known.

SEE ALSO
       sane-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7)

AUTHOR
       The package is actively maintained by Frank Zago.
	      http://www.zago.net/sane/#leo

				  11 Jul 2008			   sane-leo(5)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sane-leo&sektion=5&manpath=FreeBSD+Ports+14.3.quarterly>

home | help