FreeBSD Manual Pages
sane-matsushita(5) SANE Scanner Access Now Easy sane-matsushita(5) NAME sane-matsushita - SANE backend for Panasonic KV-SS high speed scanners DESCRIPTION The sane-matsushita library implements a SANE (Scanner Access Now Easy) backend that provides access to some Panasonic KV-SS high speed scanners. This backend is stable. At present, the following scanners are known to work with this backend: Product id -------------- KV-SS25 KV-SS25D KV-SS55EX (*) KV-S2025C (*) KV-S2045C (*) KV-S2065L (*) (*) WARNING: None of the advanced options of these scanners are available (i.e. no color, no high resolution, no automatic cropping). Basically, the driver does no more than what it does for the KV-SS25. I don't have access to such scanners, and thus cannot add these options. Other Panasonic high speed scanners may or may not work with that backend. Valid command line options and their syntax can be listed by using: scanimage --help -d matsushita Scan Mode --mode selects the basic mode of operation of the scanner. --resolution selects the resolution for a scan. Each model supports all or a sub- set of these resolutions: 100, 150, 200, 240, 300, 360, 400. --duplex indicates whether to scan both side of the sheet. --feeder-mode selects the number of pages to scan (one or until the tray is empty). Geometry --paper-size A4|...|Legal|Letter [A4] selects the area to scan. It adjusts the -l -t -x -y options accord- ingly. It does not need to be the real size of the paper. -l -t -x -y controls the scan area: -l sets the top left x coordinate, -t the top left y coordinate, -x selects the width and -y the height of the scan area. All parameters are specified in millimeters. It is possi- ble to use the option --paper-size instead. Enhancement --brightness controls the brightness of the acquired image. The value varies from 1 to 255, or less, depending on the scanner model. --contrast controls the contrast of the acquired image. Some models do not sup- port that option. --automatic-threshold automatically sets brightness, contrast, white level, gamma, noise reduction and image emphasis. These options are not available when automatic-threshold is in use. --halftone-pattern sets the tonal gradation for the halftone mode. Pattern downloading is not implemented by the backend. --autoseparation provides automatic separation of text and images. --white-level indicates the source of the white base. --noise-reduction reduces the isolated dot noise. This option is not supported by all scanners. --image-emphasis sets the image emphasis. Some selection are not available on all scanners. --gamma sets the gamma curve. It is only valid for Gray modes, and is not available on all scanners. Gamma downloading is not implemented by the backend. CONFIGURATION FILE The configuration file /usr/local/etc/sane.d/matsushita.conf supports the device name to use (e.g. /dev/scanner) and the SCSI option to auto-detect the scanners supported. FILES /usr/local/lib/sane/libsane-matsushita.a The static library implementing this backend. /usr/local/lib/sane/libsane-matsushita.so The shared library implementing this backend (present on systems that support dynamic loading). ENVIRONMENT SANE_DEBUG_MATSUSHITA If the library was compiled with debug support enabled, this envi- ronment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. LIMITATIONS Memory in the KV-SS 25 The KV-SS 25 has not enough internal memory to scan a whole A4 page in duplex mode at high resolution. The frontend will return a memory error in that case. Apparently, the KV-SS 25D has not that problem. Pattern and gamma downloading The scanner, with the proper firmware, can download a halftone pat- tern and a gamma table. This is not implemented. Sub-areas The scanner can support up to 3 sub-areas on each side to define some more precise enhancement options. This is not implemented. Duplex mode The backend does not support the setting of different options for each side. The scan will occur with the same options (halftone pat- tern, brightness, image emphasis) for both sides. SCANNING EXAMPLE To date, the only frontend capable of using this scanner at full speed is scanadf(1). A scanadf(1) command line would be: scanadf -d matsushita --output-file scan%04d.pbm --start-count 0 --duplex --resolution 300 --feeder-mode="All pages" --paper-size="A4" BUGS None known. SEE ALSO sane-scsi(5), scanimage(1), xscanimage(1), xsane(1), sane(7) AUTHOR The package is actively maintained by Frank Zago. http://www.zago.net/sane/#matsushita 11 Jul 2008 sane-matsushita(5)
NAME | DESCRIPTION | CONFIGURATION FILE | FILES | ENVIRONMENT | LIMITATIONS | SCANNING EXAMPLE | BUGS | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sane-matsushita&sektion=5&manpath=FreeBSD+Ports+15.1.quarterly>