FreeBSD Manual Pages
SCRIPT6(1) General Commands Manual SCRIPT6(1) NAME script6 - A tool to make complex IPv6 tasks easy script6 SCRIPT [PARAME- TERS] DESCRIPTION script6 is a set up scripts that make frequent and/or rather complex IPv6-related tasks easy. SCRIPTS get-aaaa This script takes no further arguments, and operates as follows: + The tool reads domain names from standard-input (one per line), and obtains the AAAA records for the corresponding domain. If the domain name does not contain AAAA records, the tool will add the suffix "www.", in the hopes that the resulting domain name might contain some. + Lines where the first non-blank character is the numeral sign (#) are consdered to contain comments, and hence are ignored. + The format of the resulting output is: # DOMAIN_NAME (CANONIC_NAME) IPV6_ADDRESS_1 IPV6_ADDRESS_2 get-alexa-domains This script takes no further arguments, and operates as follows: + It reads from standard input lines with the same format as those of Alexa's Top 1M web sites. That is, lines with the folowing syntax: RANKING,DOMAIN_NAME + It extracts the domainname from each line, and prints the corresponding domain name to standard output. This script is typically useful for extracting domain names from Alexa's Top 1M web sites file, such that they can be processed by other tools (e.g. the get-aaaa command of script6). get-ns This script takes no further arguments, and operates as follows: + The tool reads domain names from standard-input (oner per line), and obtains the NS records for the corresponding domain. + Lines where the first non-blank character is the numeral sign (#) are consdered to contain comments, and hence are ignored. + The format of the resulting output is: # DOMAIN_NAME (CANONIC_NAME) MX_RECORD_1 MX_RECORD_2 get-mx This script takes no further arguments, and operates as follows: + The tool reads domain names from standard-input (oner per line), and obtains the MX for the corresponding domain. + Lines where the first non-blank character is the numeral sign (#) are consdered to contain comments, and hence are ignored. + The format of the resulting output is: # DOMAIN_NAME (CANONIC_NAME) MX_RECORD_1 MX_RECORD_2 get-ns This script takes no further arguments, and operates as follows: + The tool reads domain names from standard-input (oner per line), and obtains the NS records for the corresponding domain. + Lines where the first non-blank character is the numeral sign (#) are consdered to contain comments, and hence are ignored. + The format of the resulting output is: # DOMAIN_NAME (CANONIC_NAME) MX_RECORD_1 MX_RECORD_2 get-trace-stats This command causes the script6 tool to read from standard input the re- sults of a "script6 trace" command (typically piped from a file), and pro- duce statistics based on such results. Among the statistics produced by this command are: * Packet drop rate: That is, the percentage of destination IPv6 addresses that result unreachable if IPv6 extension headers are employed. * Packet drop rate by different AS: That is, the percentage of packet drops that occur at an Autonomous System (AS) other than the AS corresponding to the destination IPv6 address. * Packet drop rate by same AS: That is, the percentage of packet drops that occur at the same Autonomous System (AS) as that corresponding to the destination IPv6 address. * Delta-Hops statistics: Statistics regarding the Delta-Hops at which the packet drops occur, with "delta-hops" defined as "the number of hops from the intended destination". The get-trace-stats performs a number of sanity checks on the input data (i.e., the output from "script6 trace"). For example, if a line of input indicates that the last responding node for the non-EH-enabled path6 com- mand is not the intended destination, this means that the destination is unreachable even when no IPv6 extension headers are employed, and hence the corresponding line will be discarded. trace DESTINATION [EHTYPE[EHSIZE]] [PROTOCOL [DESTPORT]]] The trace command causes the script6 to read IPv6 addresses from standard input (typically piped from a file). For each IPv6 address, the script6 will try to isolate IPv6 blackholes resulting from employing IPv6 extension headers. By default, the probe packets (containing IPv6 Extension Headers) are IPv6 packets with a Destination Options Header of 8 bytes, encapsulat- ing an ICMPv6 Echo Request message. However, this can be overridden by specifying the EHTYPE {DO,HBH,FH}, EHSIZE (an integer), PROTOCOL {tcp,udp,icmpv6}, and DESTPORT (a short integer) parameters. The "trace" command of the script6 tool internally employs the path6 tool of the toolkit as follows. Let us assume that we want to isolate an IPv6 blackhole on the path towards the destination system 2001:db8:d::1. Firstly, script6 will obtain the output of path6 towards such destination: 1. 2001:db8:1:1000::1 2. 2001:db8:2:2000::4 3. 2001:db8:2:4000::1 4. 2001:db8:3:4000::1 5. 2001:db8:3:1000::1 6. 2001:db8:4:4000::1 7. 2001:db8:4:1000::1 8. 2001:db8:5:5000::1 9. 2001:db8:5:6000::1 10. 2001:db8:d::1 Subsequently, script6 will obtain the output of EH-enabled path6 to the same destination: 1. 2001:db8:1:1000::1 2. 2001:db8:2:2000::4 3. 2001:db8:2:4000::1 4. 2001:db8:3:4000::1 5. 2001:db8:3:1000::1 6. 2001:db8:4:4000::1 For the sake of brevity, let us refer to the last-responding node in the EH-enabled path6 ("2001:db8:4:4000::1" in this case) as "M". Assuming both packets in both path6 commands employ the same path, we will refer to "the node following the last responding node in the EH-enabled path6" ("2001:db8:4:1000::1" in our case), as "M+1", etc. Based on traceroute information above, which node is the one actually drop- ping the EH-enabled packets will depend on whether the dropping node fil- ters packets on ingress or the egress. If the former, the dropping node will be M+1. If the latter, the dropping node will be "M". path6 assumes that nodes perform ingress-filtering. Thus, in our example above the last responding node to the EH-enabled traceroute ("M") is "2001:db8:4:4000::1", and therefore we assume the "node" dropping node to be "2001:db8:4:1000::1" ("M+1"). The resulting output will have the following syntax: DEST#LAST_NOEH#HOPS_NOEH#LAST_EH$HOPS_EH#DROPN#DROPN2 where: * DEST: Destination IPv6 address (as read from standard input). In our example above, this would be 2001:db8:d::1. * LAST_NOEH: Last responding IPv6 address for the path6 command with no IPv6 extension headers (this will be the same as DEST if there is a working path to the destination). In our example above, this would be 2001:db8:d::1. * HOPS_NOEH: Number of hops to LAST_NOEH. In our example above, this would be "10". * LAST_EH: Last responding IPv6 address in the EH-enabled path6 command. In our example above, this would be 2001:db8:4:4000::1. * HOPS_EH: Number of hops to LAST_EH. In our example above, this would be "6". * DROPN: Dropping node (M+1 in our explanation above). In our example above, this would be 2001:db8:4:1000::1. * DROPN: Node after the dropping node (M+2). In our example, this would be 2001:db8:5:5000::1. The output of the "trace" command is meant to be processed by the get- trace-stats command of the script6 tool. Please check the blackhole6(1) tool for a more human-friendly tool for isolating IPv6 blackholes. EXAMPLES The following sections illustrate typical use cases of the script6 tool. Example #1 $ script6 get-asn 2001:db8::1 Obtain the Origin Autonomous System (AS) number for the IPv6 address 2001:db8::1. Example #2 $ script6 get-as 2001:db8::1 Obtain information about the Origin Autonomous System (AS) of the IPv6 ad- dress 2001:db8::1. Example #3 $ cat domains.txt | script6 get-aaaa > domains-aaaa.txt Map the domain names contained in the file "domains.txt" into AAAA records, and save the results in the file "domains-aaaa.txt". Example #4 # cat domains-aaaa.txt | script6 trace do8 tcp port 25 > trace-results.txt Find IPv6 blackholes in the path to each of the IPv6 addresses contained in the file "domains-aaaa.txt" (one per line), and save the results to the file "trace-results.txt". The probe packets to be employed are IPv6 packets with a Destination Options header of 8 bytes, encapsulating a TCP segment with the Destinatio Port set to 25. Example #5 $ cat trace-results.txt | script6 get-trace-stats Produce statistics based on the trace results from the file "trace-re- sults.txt" (produced with "script6 trace"). SEE ALSO blackhole6(1) path6(1) draft-gont-v6ops-ipv6-ehs-in-real-world (available at: <http://tools.ietf.org/html/draft-gont-v6ops-ipv6-ehs-in-real-world>) for a discussion of support of IPv6 Extension Headers in the public Internet. AUTHOR The script6 tool and the corresponding manual pages were produced by Fer- nando Gont <fgont@si6networks.com> for SI6 Networks <http://www.si6net- works.com>. COPYRIGHT Copyright (c) 2014-2015 Fernando Gont. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sec- tions, no Front-Cover Texts, and no Back-Cover Texts. A copy of the li- cense is available at <http://www.gnu.org/licenses/fdl.html>. SCRIPT6(1)
NAME | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=script6&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>