FreeBSD Manual Pages
slurmdbd.conf(5) Slurm Configuration File slurmdbd.conf(5) NAME slurmdbd.conf - Slurm Database Daemon (SlurmDBD) configuration file DESCRIPTION slurmdbd.conf is an ASCII file which describes Slurm Database Daemon (SlurmDBD) configuration information. The file will always be located in the same directory as the slurm.conf. The contents of the file are case insensitive except for the names of nodes and files. Any text following a "#" in the configuration file is treated as a comment through the end of that line. Changes to the con- figuration file take effect upon restart of SlurmDBD or daemon receipt of the SIGHUP signal unless otherwise noted. This file should be only on the machine where SlurmDBD executes, owned by the SlurmUser or root, and have permissions set to 600 or 640. If the slurmdbd daemon is started as user root and changes to another user ID, the configuration file will initially be read as user root, but will be read as the other user ID in response to a SIGHUP signal. This file should be protected from unauthorized access since it contains a database password. The overall configuration parameters available in- clude: AllowNoDefAcct Remove requirement for users to have a default account. Boolean, yes to turn on, no (default) to enforce default accounts. AllResourcesAbsolute When adding a resource (license) treat allocated/allowed counts as absolute numbers instead of percentage numbers. Boolean, yes to turn on, no (default) to use the numbers as percentages in- stead. ArchiveDir If ArchiveScript is not set the slurmdbd will generate a file that can be read in anytime with sacctmgr load filename. This directory is where the file will be placed after a purge event has happened and archive for that element is set to true. De- fault is /tmp. The format for this files name is $ArchiveDir/$ClusterName_$ArchiveObject_archive_$BeginTime- Stamp_$endTimeStamp We limit archive files to MaxPurgeLimit records per file. If more records exist during that time period, they will be written to a new file. Subsequent archive files during the same time period will have ".<number>" appended to the file, for example .2, with the number increasing by one for each file in the same time period. ArchiveEvents When purging events also archive them. Boolean, yes to archive event data, no otherwise. Default is no. ArchiveJobs When purging jobs also archive them. Boolean, yes to archive job data, no otherwise. Default is no. ArchiveResvs When purging reservations also archive them. Boolean, yes to archive reservation data, no otherwise. Default is no. ArchiveScript This script can be executed every time a rollup happens (every hour, day and month), depending on the Purge*After options. This script is used to transfer accounting records out of the data- base into an archive. It is used in place of the internal process used to archive objects. The script is executed with no arguments, and the following environment variables are set. SLURM_ARCHIVE_EVENTS 1 for archive events 0 otherwise. SLURM_ARCHIVE_LAST_EVENT Time of last event start to archive. SLURM_ARCHIVE_JOBS 1 for archive jobs 0 otherwise. SLURM_ARCHIVE_LAST_JOB Time of last job submit to archive. SLURM_ARCHIVE_STEPS 1 for archive steps 0 otherwise. SLURM_ARCHIVE_LAST_STEP Time of last step start to archive. SLURM_ARCHIVE_SUSPEND 1 for archive suspend data 0 otherwise. SLURM_ARCHIVE_TXN 1 for archive transaction data 0 otherwise. SLURM_ARCHIVE_USAGE 1 for archive usage data 0 otherwise. SLURM_ARCHIVE_LAST_SUSPEND Time of last suspend start to archive. ArchiveSteps When purging steps also archive them. Boolean, yes to archive step data, no otherwise. Default is no. ArchiveSuspend When purging suspend data also archive it. Boolean, yes to archive suspend data, no otherwise. Default is no. ArchiveTXN When purging transaction data also archive it. Boolean, yes to archive transaction data, no otherwise. Default is no. ArchiveUsage When purging usage data (Cluster, Association and WCKey) also archive it. Boolean, yes to archive transaction data, no other- wise. Default is no. AuthAltTypes Comma-separated list of alternative authentication plugins that the slurmdbd will permit for communication. Acceptable values at present include auth/jwt. NOTE: The path to the required jwt_hs256.key must be specified with AuthAltParameters. The jwt_hs256.key should only be visible to the SlurmUser and root. It is not suggested to place the jwt_hs256.key on any nodes other than the machine running slurm- ctld and the machine running slurmdbd. auth/jwt can be acti- vated by the presence of the SLURM_JWT environment variable. When activated, it will override the default AuthAltParameters Used to define alternative authentication plugins options. Mul- tiple options may be comma separated. jwks= Absolute path to JWKS file. Key should be owned by Slur- mUser or root, must be readable by SlurmUser, with sug- gested permissions of 0400. It must not be writable by 'other'. Only RS256 keys are supported, although other key types may be listed in the file. If set, no HS256 key will be loaded by default (and token generation is dis- abled), although the jwt_key setting may be used to ex- plicitly re-enable HS256 key use (and token generation). jwt_key= Absolute path to JWT key file. Key must be HS256. Key should be owned by SlurmUser or root, must be readable by SlurmUser, with suggested permissions of 0400. It must not be accessible by 'other'. AuthInfo Additional information to be used for authentication of communi- cations with the Slurm control daemon (slurmctld) on each clus- ter. The interpretation of this option is specific to the con- figured AuthType. Multiple options may be specified in a comma-delimited list. If not specified, the default authentica- tion information will be used. socket Path name to a MUNGE daemon socket to use (e.g. "socket=/var/run/munge/munge.socket.2"). The de- fault value is "/var/run/munge/munge.socket.2". Used by auth/munge and cred/munge. ttl Credential lifetime, in seconds (e.g. "ttl=300"). The default value is dependent upon the MUNGE in- stallation, but is typically 300 seconds. use_client_ids Allow the auth/slurm plugin to authenticate users without relying on the user information from LDAP or the operating system. AuthType Define the authentication method for communications between Slurm components. SlurmDBD must be terminated prior to changing the value of AuthType and later restarted. This should match the AuthType used in slurm.conf. Acceptable values at present: auth/munge Indicates that MUNGE is to be used (default). (See "https://dun.github.io/munge/" for more information). auth/slurm Use Slurm's internal authentication plugin. CommitDelay How many seconds between commits on a connection from a Slurm- ctld. This speeds up inserts into the database dramatically. If you are running a very high throughput of jobs you should con- sider setting this. In testing, 1 second improves the slurmdbd performance dramatically and reduces overhead. There is a small probability of data loss though since this creates a window in which if the slurmdbd exits abnormally for any reason the data not committed could be lost. While this situation should be very rare, it does present an extremely small risk, but may be the only way to run in extremely heavy environments. In all honesty, the risk is quite low, but still present. CommunicationParameters Comma separated options identifying communication options. DisableIPv4 Disable IPv4 only operation for the slurmdbd. This should also be set in your slurm.conf file. EnableIPv6 Enable using IPv6 addresses for the slurmdbd. When using both IPv4 and IPv6, address family preferences will be based on your /etc/gai.conf file. This should also be set in your slurm.conf file. keepaliveinterval=Specifies the interval, in seconds, between keepalive probes on idle connections. This affects most outgoing connec- tions from the slurmdbd (e.g. between the primary and backup, or from the slurmdbd to the slurm- ctld). The default value is 30 seconds. keepaliveprobes=Specifies the number of unacknowledged keepalive probes sent before considering a connection broken. This affects most outgoing connections from the slurmdbd (e.g. between the primary and backup, or from the slurmdbd to the slurmctld). The default value is 3. keepalivetime=Specifies how long, in seconds, a connection must be idle before starting to send keepalive probes as well as how long to de- lay closing a connection to process messages still in the queue. This affects most outgoing connections from the slurmdbd (e.g. between the primary and backup, or from the slurmdbd to the slurmctld). The default value is 30 seconds. DbdAddr Name that DbdHost should be referred to in establishing a commu- nications path. This name will be used as an argument to the getaddrinfo() function for identification. For example, "elx0000" might be used to designate the Ethernet address for node "lx0000". By default the DbdAddr will be identical in value to DbdHost. DbdBackupHost The short, or long, name of the machine where the backup Slurm Database Daemon is executed (i.e. the name returned by the com- mand "hostname -s"). This host must have access to the same un- derlying database specified by the 'Storage' options mentioned below. DbdHost The short, or long, name of the machine where the Slurm Database Daemon is executed (i.e. the name returned by the command "host- name -s"). This value must be specified. DbdPort The port number that the Slurm Database Daemon (slurmdbd) lis- tens to for work. The default value is SLURMDBD_PORT as estab- lished at system build time. If no value is explicitly speci- fied, it will be set to 6819. This value must be equal to the AccountingStoragePort parameter in the slurm.conf file. DebugFlags Defines specific subsystems which should provide more detailed event logging. Multiple subsystems can be specified with comma separators. Most DebugFlags will result in additional logging messages for the identified subsystems if DebugLevel is at 'ver- bose' or higher. More logging may impact performance. Valid subsystems available today (with more to come) include: AuditRPCs For all inbound RPCs to slurmdbd, print the originating address, authenticated user, and RPC type before the con- nection is processed. DB_ARCHIVE SQL statements/queries when dealing with archiving and purging the database. DB_ASSOC SQL statements/queries when dealing with associations in the database. DB_EVENT SQL statements/queries when dealing with (node) events in the database. DB_JOB SQL statements/queries when dealing with jobs in the database. DB_QOS SQL statements/queries when dealing with QOS in the data- base. DB_QUERY SQL statements/queries when dealing with transactions and such in the database. DB_RESERVATION SQL statements/queries when dealing with reservations in the database. DB_RESOURCE SQL statements/queries when dealing with resources like licenses in the database. DB_STEP SQL statements/queries when dealing with steps in the database. DB_TRES SQL statements/queries when dealing with trackable re- sources in the database. DB_USAGE SQL statements/queries when dealing with usage queries and inserts in the database. DB_WCKEY SQL statements/queries when dealing with wckeys in the database. FEDERATION SQL statements/queries when dealing with federations in the database. Network Network details. NetworkRaw Dump raw hex values of key Network communications. TLS TLS plugin DebugLevel The level of detail to provide the Slurm Database Daemon's logs. The default value is info. quiet Log nothing fatal Log only fatal errors error Log only errors info Log errors and general informational messages verbose Log errors and verbose informational messages debug Log errors and verbose informational messages and de- bugging messages debug2 Log errors and verbose informational messages and more debugging messages debug3 Log errors and verbose informational messages and even more debugging messages debug4 Log errors and verbose informational messages and even more debugging messages debug5 Log errors and verbose informational messages and even more debugging messages DebugLevelSyslog The slurmdbd daemon will log events to the syslog file at the specified level of detail. If not set, the slurmdbd daemon will log to syslog at level fatal, unless there is no LogFile and it is running in the background, in which case it will log to sys- log at the level specified by DebugLevel (at fatal in the case that DebugLevel is set to quiet) or it is run in the foreground, when it will be set to quiet. quiet Log nothing fatal Log only fatal errors error Log only errors info Log errors and general informational messages verbose Log errors and verbose informational messages debug Log errors and verbose informational messages and de- bugging messages debug2 Log errors and verbose informational messages and more debugging messages debug3 Log errors and verbose informational messages and even more debugging messages debug4 Log errors and verbose informational messages and even more debugging messages debug5 Log errors and verbose informational messages and even more debugging messages NOTE: By default, Slurm's systemd service file starts the slur- mdbd daemon in the foreground with the -D option. This means that systemd will capture stdout/stderr output and print that to syslog, independent of Slurm printing to syslog directly. To prevent systemd from doing this, add "StandardOutput=null" and "StandardError=null" to the respective service files or override files. DefaultQOS When adding a new cluster this will be used as the qos for the cluster unless something is explicitly set by the admin with the create. DisableArchiveCommands Disable the ability to run sacctmgr archive commands. DisableCoordDBD Disable the coordinator status in all slurmdbd interactions. When this is set, a coordinator may not do the following in slurmdbd as they relate to the account(s) they coordinate: Add accounts Add/Modify/Remove associations Add/Remove coordinators Add/Modify/Remove users Boolean, yes to turn on, no (default) to recognize coordinator status in all slurmdbd interactions. HashPlugin Identifies the type of hash plugin to use for network communica- tion. Acceptable values include: hash/k12 Hashes are generated by the KangorooTwelve cryp- tographic hash function. This is the default. hash/sha3 Hashes are generated by the SHA-3 cryptographic hash function. NOTE: Make sure that HashPlugin has the same value both in slurm.conf and in slurmdbd.conf. LogFile Fully qualified pathname of a file into which the Slurm Database Daemon's logs are written. The default value is none (performs logging via syslog). See the section LOGGING in the slurm.conf man page if a pathname is specified. LogTimeFormat Format of the timestamp in slurmdbd log files. Accepted format values include "iso8601", "iso8601_ms", "rfc5424", "rfc5424_ms", "rfc3339", "clock", "short" and "thread_id". The values ending in "_ms" differ from the ones without in that fractional seconds with millisecond precision are printed. The default value is "iso8601_ms". The "rfc5424" formats are the same as the "iso8601" formats except that the timezone value is also shown. The "clock" format shows a timestamp in microseconds retrieved with the C standard clock() function. The "short" format is a short date and time format. The "thread_id" format shows the timestamp in the C standard ctime() function form without the year but including the microseconds, the daemon's process ID and the current thread name and ID. MaxPurgeLimit When archiving and purging records, limit each individual opera- tion to this many rows. The operations will then repeat until all targeted rows are processed. This limit ensures that locks will periodically be released, allowing other database opera- tions to occur. A lower limit will release locks more fre- quently, which may improve system responsiveness while purging records from large tables. However, a lower limit will also in- crease the total amount of time required to complete the purge. In most cases it is not recommended to set a higher limit than default. Default value is 50000. MaxQueryTimeRange Return an error if a query is against too large of a time span, to prevent ill-formed queries from causing performance problems within SlurmDBD. Default value is INFINITE which allows any queries to proceed. Accepted time formats are the same as the MaxTime option in slurm.conf. Operator and higher privileged users are exempt from this restriction. Note that queries which attempt to return over 3GB of data will still fail to complete with ESLURM_RESULT_TOO_LARGE. MessageTimeout Time permitted for a round-trip communication to complete in seconds. Default value is 10 seconds. Parameters Contains arbitrary comma separated parameters used to alter the behavior of the slurmdbd. PreserveCaseUser When defining users do not force lower case which is the default behavior. PidFile Fully qualified pathname of a file into which the Slurm Database Daemon may write its process ID. This may be used for automated signal processing. The default value is "/var/run/slur- mdbd.pid". PluginDir Identifies the places in which to look for Slurm plugins. This is a colon-separated list of directories, like the PATH environ- ment variable. The default value is the prefix given at config- ure time + "/lib/slurm". PrivateData This controls what type of information is hidden from regular users. By default, all information is visible to all users. User SlurmUser, root, and users with AdminLevel=Admin can always view all information. Multiple values may be specified with a comma separator. Acceptable values include: accounts prevents users from viewing any account definitions un- less they are coordinators of them. events prevents users from viewing event information unless they have operator status or above. jobs prevents users from viewing job records belonging to other users unless they are coordinators of the account running the job when using sacct. reservations restricts getting reservation information to users with operator status and above. usage prevents users from viewing usage of any other user. This applies to sreport. users prevents users from viewing information of any user other than themselves, this also makes it so users can only see associations they deal with. Coordinators can see asso- ciations of all users in the account they are coordinator of, but can only see themselves when listing users. PurgeEventAfter Events are purged from the database after this amount of time has passed since they ended. This includes node down times and such. The time is a numeric value and is a number of months. If you want to purge more often you can include "hours", or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes place at the start of the each purge interval. For example, if the purge time is 2 months, the purge would happen at the beginning of each month. If not set (de- fault), then event records are never purged. PurgeJobAfter Individual job records are purged from the database after this amount of time has passed since they ended. Aggregated informa- tion will be preserved to "PurgeUsageAfter". The time is a nu- meric value and is a number of months. If you want to purge more often you can include "hours", or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes place at the start of the each purge interval. For example, if the purge time is 2 months, the purge would happen at the beginning of each month. If not set (default), then job records are never purged. PurgeResvAfter Individual reservation records are purged from the database af- ter this amount of time has passed since they ended. Aggregated information will be preserved to "PurgeUsageAfter". The time is a numeric value and is a number of months. If you want to purge more often you can include "hours", or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes place at the start of the each purge interval. For example, if the purge time is 2 months, the purge would happen at the beginning of each month. If not set (default), then reservation records are never purged. PurgeStepAfter Individual job step records are purged from the database after this amount of time has passed since they ended. Aggregated in- formation will be preserved to "PurgeUsageAfter". The time is a numeric value and is a number of months. If you want to purge more often you can include "hours", or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes place at the start of the each purge interval. For example, if the purge time is 2 months, the purge would happen at the beginning of each month. If not set (default), then job step records are never purged. PurgeSuspendAfter Individual job suspend records are purged from the database af- ter this amount of time has passed since they ended. Aggregated information will be preserved to "PurgeUsageAfter". The time is a numeric value and is a number of months. If you want to purge more often you can include "hours", or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes place at the start of the each purge interval. For example, if the purge time is 2 months, the purge would happen at the beginning of each month. If not set (default), then sus- pend records are never purged. PurgeTXNAfter Individual transaction records are purged from the database af- ter this amount of time has passed since they occurred. The time is a numeric value and is a number of months. If you want to purge more often you can include "hours", or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes place at the start of the each purge interval. For example, if the purge time is 2 months, the purge would hap- pen at the beginning of each month. If not set (default), then transaction records are never purged. PurgeUsageAfter Usage records (Cluster, Association, QOS and WCKey) are purged from the database after this amount of time has passed since they were created or last modified. These tables are the source for reports generated by the sreport(1) command. The time is a numeric value and is a number of months. If you want to purge more often you can include "hours", or "days" behind the numeric value to get those more frequent purges (i.e. a value of "12hours" would purge everything older than 12 hours). The purge takes place at the start of the each purge interval. For example, if the purge time is 2 months, the purge would happen at the beginning of each month. If not set (default), then us- age records are never purged. SlurmUser The name of the user that the slurmdbd daemon executes as. This user should match the SlurmUser used for all instances of slurm- ctld that report to slurmdbd. It must exist on the machine exe- cuting the Slurm Database Daemon and have the same UID as the hosts on which slurmctld executes. For security purposes, a user other than "root" is recommended. The default value is "root". NOTE: If the SlurmUser for slurmctld is root you can still use a non-root SlurmUser for slurmdbd (in any other case, both Slur- mUsers should match) by explicitly setting the user's AdminLevel to Admin. After adding a user in this way, you must restart slurmctld. StorageBackupHost Define the name of the backup host the database is running where we are going to store the data. This can be viewed as a backup solution when the StorageHost is not responding. It is up to the backup solution to enforce the coherency of the accounting in- formation between the two hosts. With clustered database solu- tions (active/passive HA), you would not need to use this fea- ture. Default is none. StorageHost Define the name of the host the database is running where we are going to store the data. This can be the host on which slurmdbd executes, but for larger systems, we recommend keeping the data- base on a separate machine. StorageLoc Specify the name of the database as the location where account- ing records are written. Defaults to "slurm_acct_db". StorageParameters Comma separated list of key-value pair parameters. SSL_CERT The path name of the client public key certificate file. SSL_CA The path name of the Certificate Authority (CA) certificate file. SSL_CAPATH The path name of the directory that contains trusted SSL CA certificate files. SSL_KEY The path name of the client private key file. SSL_CIPHER The list of permissible ciphers for SSL encryption. token_duration Duration in seconds to cache generated database passwords be- fore requesting a new one from the StoragePassScript. Typi- cally the token should refresh prior to actual expiration; upon token generation failure the cached token will continue to be used to avoid transient generation failures from causing connection failures. Default value is 300 seconds (5 min- utes). StoragePass Define the password used to gain access to the database to store the job accounting data. The '#' character is not permitted in a password. StoragePassScript Absolute path to an executable script that generates ephemeral authentication tokens for database connections which are used instead of StoragePass. The script must output the password/to- ken to stdout and exit with status 0 on success. This allows dy- namic password generation, instead of storing static credentials in configuration files. The script must be owned and executable by SlurmUser. Environment variables provided to the script: SLURM_STORAGE_HOSTNAME Database hostname SLURM_STORAGE_PORT Database port number SLURM_STORAGE_USER Database username Expected output format: TOKEN=<authentication_token> The script must exit with status 0 on success, non-zero on fail- ure. Any output to stderr will be logged as an error. If there is a backup host specified, the script will still be provided the main hostname and the same token is used for both hosts. StoragePort The port number that the Slurm Database Daemon (slurmdbd) commu- nicates with the database. Default is 3306. StorageType Define the accounting storage mechanism type. Acceptable values at present include "accounting_storage/mysql". The value "ac- counting_storage/mysql" indicates that accounting records should be written to a MySQL or MariaDB database specified by the Stor- ageLoc parameter. This value must be specified. StorageUser Define the name of the user we are going to connect to the data- base with to store the job accounting data. If no value is spec- ified, the user that started the slurmdbd will be used. TCPTimeout Time permitted for TCP connection to be established. Default value is 2 seconds. TLSParameters Comma-separated options identifying TLS options. Supported val- ues include: ca_cert_file= Path of certificate authority (CA) certificate. Must ex- ist on all hosts and be accessible by all Slurm compo- nents. File permissions must be 644, and owned by Slur- mUser/root. Default path is "ca_cert.pem" in the Slurm configuration directory dbd_cert_file= Path of certificate used by slurmdbd. Must chain to ca_cert_file. Should only exist on host running slurmdbd. File permissions must be 600, and owned by SlurmUser. Default path is "dbd_cert.pem" in the Slurm configuration directory dbd_cert_key_file= Path of private key that accompanies dbd_cert_file. Should only exist on host running slurmdbd. File permis- sions must be 600, and owned by SlurmUser. Default path is "dbd_cert_key.pem" in the Slurm configu- ration directory load_system_certificates Load certificates found in default system locations (e.g. /etc/ssl) into trust store. Default is to not load system certificates, and to rely solely on ca_cert_file to establish trust. security_policy_version= Security policy version used by s2n. See s2n documenta- tion for more details. Default security policy is "20230317", which is FIPS compliant and includes TLS 1.3. TLSType Specify the TLS implementation that will be used. Acceptable values at present: tls/s2n Use the s2n TLS plugin. TrackSlurmctldDown Boolean yes or no. If set the slurmdbd will mark all idle re- sources on the cluster as down when a slurmctld disconnects or is no longer reachable. The default is no. TrackWCKey Boolean yes or no. Used to set display and track of the Workload Characterization Key. Must be set to track wckey usage. This must be set to generate rolled up usage tables from WCKeys. NOTE: If TrackWCKey is set here and not in your various slurm.conf files all jobs will be attributed to their default WCKey. EXAMPLE # # Sample /etc/slurmdbd.conf # ArchiveEvents=yes ArchiveJobs=yes ArchiveResvs=yes ArchiveSteps=no ArchiveSuspend=no ArchiveTXN=no ArchiveUsage=no #ArchiveScript=/usr/sbin/slurm.dbd.archive AuthInfo=/var/run/munge/munge.socket.2 AuthType=auth/munge DbdHost=db_host DebugLevel=info PurgeEventAfter=1month PurgeJobAfter=12month PurgeResvAfter=1month PurgeStepAfter=1month PurgeSuspendAfter=1month PurgeTXNAfter=12month PurgeUsageAfter=24month LogFile=/var/log/slurmdbd.log PidFile=/var/run/slurmdbd.pid SlurmUser=slurm_mgr StoragePass=password_to_database StorageType=accounting_storage/mysql StorageUser=database_mgr COPYING Copyright (C) 2008-2010 Lawrence Livermore National Security. Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER). Copyright (C) 2010-2022 SchedMD LLC. This file is part of Slurm, a resource management program. For de- tails, see <https://slurm.schedmd.com/>. Slurm is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your op- tion) any later version. Slurm is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. FILES /etc/slurmdbd.conf SEE ALSO slurm.conf(5), slurmctld(8), slurmdbd(8) syslog (2) Slurm 25.11 Slurm Configuration File slurmdbd.conf(5)
NAME | DESCRIPTION | EXAMPLE | COPYING | FILES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=slurmdbd.conf&sektion=5&manpath=FreeBSD+Ports+15.0.quarterly>