st-flash(1) stlink st-flash(1) NAME st-flash - Flash binary files to STM32 device SYNOPSIS st-flash [OPTIONS] {read|write|erase} [FILE] <ADDR> <SIZE> DESCRIPTION Flash binary files to arbitrary sections of memory, or read arbitrary ad- dresses of memory out to a binary file. You can use this instead of st-util(1) if you prefer, but remember to use the .bin image, rather than the .elf file. Use hexadecimal format for the ADDR and SIZE. COMMANDS write FILE ADDR Write firmware FILE to device starting from ADDR read FILE ADDR SIZE Read firmware from device starting from ADDR up to SIZE bytes to FILE erase Perform a mass erasing of the device firmware reset Reset the target OPTIONS --version Print version information --debug TODO --reset Trigger a reset both before and after flashing --opt Enable ignore ending empty bytes optimization --serial iSerial TODO --flash=fsize Where fsize is the size in decimal, octal, or hex followed by an op- tional multiplier `k' for KB, or `m' for MB. Use a leading "0x" to specify hexadecimal, or a leading zero for octal. EXAMPLES Flash firmware.bin to device $ st-flash write firmware.bin 0x8000000 Read firmware from device (4096 bytes) $ st-flash read firmware.bin 0x8000000 0x1000 Erase firmware from device $ st-flash erase SEE ALSO st-util(1), st-info(1) COPYRIGHT This work is copyrighted. Stlink contributors. See LICENSE file in the stlink source distribution. Open Source STMicroelectronics S... Feb 2018 st-flash(1)
NAME | SYNOPSIS | DESCRIPTION | COMMANDS | OPTIONS | EXAMPLES | SEE ALSO | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=st-flash&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>