FreeBSD Manual Pages
TDROP(1) tdrop man page TDROP(1) NAME Tdrop - make dropdown terminals and windows SYNOPSIS tdrop [OPTIONS] [program name or cmd] [program options ...] DESCRIPTION Tdrop is used for hiding/unhiding programs to acheive quake/drop- down functionality. It can create a dropdown window if one does not al- ready exist or turn the current window into a dropdown on the fly. It provides options to control the intial size and position of dropdowns, for example to leave panels visible or to deal with window borders. When used with a terminal, it provides an option to specify the name of a tmux session to automatically start. It also allows the user to spec- ify arbitrary options/flags to be used when starting programs. It uses window IDs as opposed to classes, so it can be used with multiple win- dows of the same program. It also has the ability to automatically hide and automatically show dropdowns. For example, it can be used to automatically hide a terminal when opening something from it, e.g. an image viewer, video player, etc. Tdrop can then automatically bring back the termi- nal whenever the image view, video player, etc. is closed. See the Ex- amples section for more information. Commands Tdrop expects the name of a program or 'current' (to use the current window) as the last argument to create a dropdown (optionally followed by any flags to that program). Alternatively, it can take one of auto_show, auto_hide, toggle_auto_hide, hide_all, or foreach. If hide_all is given instead of a program name, tdrop will hide all visi- ble dropdowns. Foreach will run a run a command for each dropdown. For example, you can do the equivalent of hide_all with the following: tdrop foreach 'unmap $wid' To hide floating dropdowns only on herbstluftwm: tdrop foreach 'herbstclient compare clients.$(printf 0x%x $wid).float- ing = on && unmap $wid' Tdrop's functionality (except potentially foreach) is not particularly useful called directly from the command line. Commands should either be bound to a key, used in shell functions/aliases, or used with a file opener (e.g. in the rifle.conf). OPTIONS E.g. $ tdrop -y 15 termite $ tdrop --y-offset=15 termite $ tdrop --y-offset 15 termite Note that all hook and command related options can make use of any tdrop variables (such as $width, $height, $xoff, $yoff, $class, $wid, etc.). Note that for some of the hooks, the window id is not guarunteed to be known (since the window may not have yet been created), so any scripts that make use of these should check if it is defined (pre-map and pre-float; wid will never be known for pre-create). -w WIDTH, --width=WIDTH Specify a width for a created window as a number or percentage. A negative number is allowed (e.g. '-w -4') in which case the width will be that many pixels less than 100% of the screen size (or monitor size if '-m' is being used). This fixes the problem where 100% width may actually go over the screen due to window borders/decoration. The other other geometry options also accept negative values ('-h', '-x', and '-y'). If both the width and height are specified as empty/"", do not alter the window's size. (default: 100%) -h HEIGHT, --height=HEIGHT Specify a height for a created window as a number or percentage. If both the width and height are specified as empty/"", do not alter the window's size. (default: 45%) -x OFFSET, --x-offset=OFFSET Specify the x position for a created window as a number or per- centage. If both the x and y offsets are specified as empty/"", do not alter the window's position. (default: 0) -y OFFSET, --y-offset=OFFSET Specify the y position for a created window as a number or per- centage. If both the x and y offsets are specified as empty/"", do not alter the window's position. (default: 1, see BUGS) -s NAME, --session=NAME Specify a tmuxinator, tmuxifier, or tmux session name to start. An existing tmux session has highest precedence and will be con- nected to with '-d', detaching other attached clients. If a there is no tmuxinator/tmuxifier/etc. session of the given name, a normal tmux session with the name will be created. If this op- tion is not given, tmux will not be used. Note that this option requires that the program be a supported terminal. (default: none) -n NUMBER, --number=NUMBER Specify a number (or any extra text) to differentiate between dropdowns of the same program (this is only needed when using multiple dropdowns of the same program). This flag can also be used for creating multiple different dropdowns on the fly ('cur- rent'). Note that it is not necessary to use this to deal with multi-user systems as tdrop stores dropdown information sepa- rately for each user. (default: none) -c COMMAND, --pre-create-hook=COMMAND Specify a command to execute before first creating or initializ- ing a dropdown (before mapping a normal dropdown or before un- mapping the 'current' window). This flag has no effect for the auto_(hide|show) commands. (default: none) -C, --post-create-hook=COMMAND Specify a command to execute after first creating or initializ- ing a dropdown (after mapping a normal dropdown or after unmap- ping the 'current' window). This flag has no effect for the auto_(hide|show) commands. (default: none) -p COMMAND, --pre-map-hook=COMMAND Specify a command to execute before showing/mapping a dropdown. Note that this will run when showing a dropdown for the first time even when --pre-create-hook is used. (default: none) -P COMMAND, --post-map-hook=COMMAND Specify a command to execute after showing/mapping a dropdown. Note that this will run when hiding a dropdown for the first time even when --post-create-hook is used. (default: none) -u COMMAND, --pre-unmap-hook=COMMAND Specify a command to execute before hiding/unmapping a dropdown. (default: none) -U COMMAND, --post-unmap-hook=COMMAND Specify a command to execute after hiding/unmapping a dropdown. (default: none) -l COMMAND, --pre-map-float-command=COMMAND Specify a command execute before showing/mapping a dropdown in order to float the dropdown (e.g. a bspwm oneshot rule). This may be useful if you don't want to float all windows of a given program and tdrop doesn't automatically support this for your window manager with the -a flag. This will override any default floating command when used with -a. -L COMMAND, --post-map-float-command=COMMAND Specify a command execute after showing/mapping a dropdown in order to float the dropdown. This may be useful if you don't want to float all windows of a given program and tdrop doesn't automatically support this for your window manager with the -a flag. This can be used if your window manager does not support floating rules at all; for example, it can be used to fake a key combination (e.g. using xdotool) that will float the current window. This will override any default floating command when used with -a. -d DEC_SIZE, --decoration-fix=DEC_SIZE Specify a window decoration/border size in the form <x decora- tion size>x<y decoration size> to be taken into account when saving window position. This should not be necessary for most window managers and is only used with 'auto_show', e.g. 'tdrop -d 1x22 auto_show' for blackbox. (default: none) -S, --no-subtract-when-same This option is a more complicated companion to -d that is also unlikely to be needed. This is used to determine how to calcu- late the X and Y position of a window using xwininfo when 'auto_hide' is used (if the absolute and relative X or Y values are reported as the same, this option determines the behavior). If you are sure you have the decoration size correct, but win- dows are still being restored in an incorrect position with 'auto_show', you may want to try using this. Takes no argument. (default: false) -i, --is-floating Specify a command that will determine whether the current window is floating ($wid can be used in the command instead). Only used for the auto_hide command. This will be used to save whether the current window is floating or not. When restoring the window, if there is a float command and the window was previously floating, it will be floated. (default: none) -f, --program-flags NOTE: Using this flag is deprecated; it may be removed in the future. Instead, specify program flags after the program (e.g. "tdrop kitty --name foo"). Specify flags/options that the terminal or program should be called with. For example, to set the title of the terminal, something like 'tdrop -f "--title mytitle" <program>' can be used. Caution: If there is a tmux session specified (with -s), the op- tion to execute a program (usually -e for terminal programs) is implicitly added by tdrop! (default: none) -a, --auto-detect-wm If there are available settings for the detected window manager for the -l, -L, -d, and/or -i options, automatically set them. Takes no argument. Manually specified settings take precedence. This can be used both for dropdowns and the auto_(hide|show) commands. Takes no argument. (default: false) -m, --monitor-aware This option only applies for dropdowns (not auto-hiding and auto-showing). Specify that geometry values should be relative to the current monitor. For example, if the width is a percent- age or negative value, the pixel width will be calculated as a percentage of the current monitor's width (instead of the com- bined width of all monitors). If the monitor changes, this op- tion will cause a dropdown to be resized to fit the given per- centages. Note that this option assumes xrandr is being used and requires xrandr to work. (default: false) -t, --pointer-monitor-detection Use mouse pointer location for detecting which monitor is the current one so terminal will be displayed on it. Without this option, the monitor with currently active window is considered the current one. This option is only effective if -m / --moni- tor-aware option is enabled. -A, --activate Always activate/show the dropdown if it is not currently fo- cused. Only hide the dropdown if it is currently focused. --monitor=NAME Specify the monitor to base geometry calculations on when using -m / --monitor-aware instead of detecting the monitor by the ac- tively focused window or mouse pointer. --wm=NAME Specify the window manager name (which determines the default settings when -a is specified). This may be useful if you've change the name of your window manager using wmname as this will prevent tdrop from correctly detecting the real window manager name. This could also potentially be useful if the all the de- fault -a settings for another window manager work with the cur- rent one (e.g. if using a similar but differently named fork of some window manager). (default: automatically detected) --class=NAME Providing this option lets tdrop know what the class (or class- name) of the window is (it does not actually set the class for a window). This is used for window managers like bspwm that use the class for floating rules. For some commonly used programs, tdrop will already use the correct class. This option is useful when the program name and class are not the same and there is not already a default mapping between the two. (default: the program name or a known substitution) Both the class and classname of a window can be obtained using xprop (see WM_CLASS). As for the difference, generally the class starts with an uppercase letter and the classname starts with a lowercase letter. The xprop output may only list one for some programs (e.g. urxvt only has "urxvt"). Currently this option is only useful for bspwm, and it does not matter whether the class or classname (which bspwm calls an instance name) is provided, so the user does not really need to worry about the distinction. --name=NAME This option only applies for dropdowns (not auto-hiding and auto-showing). Set a new name for the dropdown window (see _NET_WM_NAME and WM_NAME in xprop output). This option may be useful if you want to add specific rules just for dropdowns with a program like compton by giving them a common title. (default: none) --clear Used to clear a saved window id for the given program or 'cur- rent' instead of creating a dropdown. Takes no argument. --no-cancel Specifies that manually re-showing an auto-hidden window with tdrop should not cancel an auto_show. Takes no argument. See the examples. --timeout Specifies the timeout in to wait for a window to appear when starting a program before giving up. This prevents a tdrop process from sticking around forever if a program fails to start. (default: 10) --debug Print information for debugging to stdout and to /tmp/tdrop_<user>/log. Takes no argument. (default: false) -r, --remember Store window geometry when hiding and restore geometry when showing instead of using the specified -x, -y, -w, and -h argu- ments. If used in combination with -m, the x and y positions will be shifted relative to the current monitor when stor- ing/restoring. For example, if you close the dropdown on the leftmost monitor where x is 0 and restore on a monitor to the right, tdrop will offset x so it shows up on the right monitor. This option takes no argument. (default: false) -N, --no-manage This is shorthand for -x "", -y "", -w "", -h "" and is incom- patible with them (do not set both). When specified, tdrop will not enforce any geometry on the dropdown. This can be useful in combination with --remember if you want to ignore the default geometry values and not have tdrop alter the window geometry when first creating the dropdown. Takes no argument. (default: false) --help Print basic help information. Takes no argument. EXAMPLES Making Dropdowns Use a key binding program such as sxhkd to bind keys to these commands. The simplest example to make a dropdown for an xterm: $ tdrop xterm When using a tiling window manager like bspwm, dropdowns like guake will by default be tiled instead of floated. One can create a rule to float every instance of guake or another dropdown. However, one may not want to float every instance of a terminal used with tdrop. Tdrop al- lows the user to run their own commands at various points during execu- tion, for example before mapping the window: $ tdrop -p "bspc rule -a xterm -o floating=on" xterm Tdrop also provides tested settings for certain window managers. One can use the '-a' flag if settings exist for the current window manager. For example, if bspwm is the window manager, the following command is the same as the above command and will work for whatever terminal/pro- gram is specified and will also work with 'tdrop auto_show'. For a list of window managers with tested settings see the readme or the script itself. $ tdrop -a xterm Tdrop supports controlling the initial size and placement of a termi- nal. The border of a window may need to be taken into an account. For example, I use a border size of 2, so I use 4 less than my screen size. I also use a y-offset of 14 so that the dropdown doesn't hide my panel: $ tdrop -a -w 1362 -y 14 xterm Tdrop can also create a tmux session if it does not exist: $ tdrop -a -w 1362 -y 14 -s dropdown xterm Tdrop allows for having multiple dropdowns of the same type: $ tdrop xterm $ tdrop -n 1 xterm $ tdrop -n 2 xterm Tdrop works with normal windows (with some potential visual annoyance, see BUGS): $ tdrop zathura # the current window $ tdrop current Once a window is turned into a dropdown, the key bound to 'tdrop ... current' will continue to toggle that window until it is closed. Then the key can be used to create a new dropdown. '-n' can also be used to have multiple 'current' keys. If an active window is accidentally turned into a dropdown, it can be cleared: $ tdrop --clear current # clear a specific number $ tdrop -n 1 --clear current Auto-hiding/showing These example will work even for non-dropdown terminals. Tdrop provides the functionality to get programs/terminals out of the way when opening other programs. For example, when opening an image viewer from a normal floating dropdown, the dropdown will be over the image viewer. This requires an extra hotkey press to hide the dropdown. If one wants to return to the dropdown after looking at images, the hotkey must be once again invoked. Tdrop allows for this process to be automated. For example, this could be added to a shell's config/startup file: hide_on_open() { tdrop -a auto_hide; "$@" && tdrop -a auto_show } To use it in an alias when writing a commit message in an graphical $EDITOR started from a terminal: alias gc='hide_on_open git commit' This will hide the terminal window when opening the commit editor and then reshow the terminal once the editor is closed. It should also maintain the window's position and size when showing it. If the window moves down and to the right every time it is auto-hidden and then shown again, the user may need to specify a -d value. Alternatively, if one already exists for the user's window manager, -a can be used to auto- matically set it. The -l and -L options are also used with auto_show and can be set automatically with -a if default settings exist for the current window manager. Note that for tiling window managers that support 'tdrop -a auto_show', reshowing a window will always float the window (even if it was orig- nally tiled) if -i is not specified. To prevent this, also use 'tdrop -a auto_hide' if your window manager is supported. Otherwise, -i must be manually specified with auto_hide. This functionality might lead to some unwanted "re-shows" of dropdown. Consider a situation in which one opens an image viewer from a dropdown and leaves it open for a while, resuming normal use of the dropdown. When the image viewer is closed, the dropdown appears, unwanted. Tdrop is smart about this and won't "re-show" a dropdown if it has been manu- ally toggled since an auto-hide. If you don't want this check to hap- pen, use '--no-cancel' in your dropdown key binding. Auto-hiding functionality is particularly nice to use with a file opener like rifle: mime ^image, has sxiv, X, flag f = tdrop auto_hide ; sxiv -a -- "$@" && tdrop -a auto_show BUGS If -y is set to 0, a window may be subsequently moved to the middle when showing/mapping it with xdotool. This may have to do with the win- dow border. AUTHOR Fox Kiester <noct at posteo.net> Source: https://github.com/noctuid/tdrop SEE ALSO xdotool(1), sxhkd(1), xprop(1), xwininfo(1), tmux(1) tdrop 0.5.0 11 February 2015 TDROP(1)
NAME | SYNOPSIS | DESCRIPTION | Commands | OPTIONS | EXAMPLES | BUGS | AUTHOR | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=tdrop&sektion=1&manpath=FreeBSD+Ports+15.0>