UPDMAP(1) User Commands UPDMAP(1) NAME updmap - manage TeX font maps updmap-sys - manage TeX font maps, system-wide updmap-user - manage TeX font maps, per-user SYNOPSIS updmap [-user|-sys] [OPTION] ... [COMMAND] updmap-user [OPTION] ... [COMMAND] updmap-sys [OPTION] ... [COMMAND] DESCRIPTION updmap version r70707 (2024-03-19 23:03:22 +0100) Update the default font map files used by pdftex and dvipdfm(x) (pdf- tex.map), dvips (psfonts.map), and optionally pxdvi, as determined by all configuration files updmap.cfg (usually the ones returned by running "kpse- which --all updmap.cfg", but see below). Among other things, these map files are used to determine which fonts should be used as bitmaps and which as outlines, and to determine which font files are included, typically subsetted, in the PDF or PostScript out- put. These maps are for fonts installed within the TeX hierarchy, and are not related to any system font lookups. They are primarily used for Type 1 fonts, though a few OpenType and TrueType fonts are involved also. updmap-sys (or updmap -sys) is intended to affect the system-wide configu- ration, while updmap-user (or updmap -user) affects personal configuration files only, overriding the system files. As a consequence, once updmap-user has been run, even a single time, run- ning updmap-sys no longer has any effect. updmap-sys issues a warning about this, since it is rarely desirable. See https://tug.org/texlive/scripts-sys-user.html for details. By default, the TeX filename database (ls-R) is also updated; use --nohash to skip that step. The updmap system is regrettably complicated, for both inherent and histor- ical reasons. A general overview: - updmap.cfg files are mainly about listing other files, namely the font-specific .maps, in which each line gives information about a different TeX (.tfm) font. - updmap reads the updmap.cfg files and then concatenates the contents of those .map files into the main output files, generically named: psfonts.map for dvips, and pdftex.map for pdftex and dvipdfmx. - The updmap.cfg files themselves are created and updated at package installation time, by the system installer or the package manager or by hand, and not (by default) by updmap. OPTIONS --cnffile FILE read FILE for the updmap configuration (can be given multiple times, in which case all the files are used) --dvipdfmxoutputdir DIR specify output directory (dvipdfm(x) syntax) --dvipsoutputdir DIR specify output directory (dvips syntax) --pdftexoutputdir DIR specify output directory (pdftex syntax) --pxdvioutputdir DIR specify output directory (pxdvi syntax) --outputdir DIR specify output directory (for all files) --[no-]copy create generic files as copies (default); with -no-copy, create sym- links --force recreate files even if config hasn't changed --nomkmap do not recreate map files --nohash do not run mktexlsr (a.k.a. texhash) --sys affect system-wide files (equivalent to updmap-sys) --user affect personal files (equivalent to updmap-user) -n, --dry-run only show the configuration, no output --quiet, --silent reduce verbosity Commands: --help show this message and exit --version show version information and exit --showoption OPTION show the current setting of OPTION --showoptions OPTION show possible settings for OPTION --setoption OPTION VALUE set OPTION to value; option names below --setoption OPTION=VALUE as above, just different syntax --enable MAPTYPE MAPFILE add "MAPTYPE MAPFILE" to updmap.cfg, where MAPTYPE is Map, MixedMap, or KanjiMap --enable Map=MAPFILE add "Map MAPFILE" to updmap.cfg --enable MixedMap=MAPFILE add "MixedMap MAPFILE" to updmap.cfg --enable KanjiMap=MAPFILE add "KanjiMap MAPFILE" to updmap.cfg --disable MAPFILE disable MAPFILE, of whatever type --listmaps list all maps (details below) --listavailablemaps list available maps (details below) --syncwithtrees disable unavailable map files in updmap.cfg The main output: The main output of updmap is the files containing the individual font map lines which the drivers (dvips, pdftex, etc.) read to han- dle fonts. The map files for dvips (psfonts.map) and pdftex and dvipdfmx (pdf- tex.map) are written to TEXMFVAR/fonts/map/updmap/{dvips,pdftex}/. In addition, information about Kanji fonts is written to TEXMF- VAR/fonts/map/updmap/dvipdfmx/kanjix.map, and optionally to TEXMF- VAR/fonts/map/updmap/pxdvi/xdvi-ptex.map. These are for Kanji only and are not like other map files. dvipdfmx reads pdftex.map for the map entries for non-Kanji fonts. If no option is given, so the invocation is just "updmap-user" or "updmap-sys", these output files are always recreated. Otherwise, if an option such as --enable or --disable is given, the output files are recreated if the list of enabled map files (from updmap.cfg) has changed. The --force option overrides this, always recreating the output files. Explanation of the map types: The normal type is Map. The only difference between Map and MixedMap is that MixedMap en- tries are not added to psfonts_pk.map. The purpose is to help users with devices that render Type 1 outline fonts worse than mode-tuned Type 3 bitmap fonts. So, MixedMap is used for fonts that are avail- able as both Type 1 and Metafont. KanjiMap entries are added to psfonts_t1.map and kanjix.map. Explanation of the OPTION names for --showoptions, --showoption, --setop- tion: dvipsPreferOutline true,false (default true) Whether dvips uses bitmaps or outlines, when both are available. dvipsDownloadBase35 true,false (default true) Whether dvips includes the standard 35 PostScript fonts in its out- put. pdftexDownloadBase14 true,false (default true) Whether pdftex includes the standard 14 PDF fonts in its output. pxdviUse true,false (default false) Whether maps for pxdvi (Japanese-patched xdvi) are under updmap's control. jaEmbed (any string) jaVariant (any string) scEmbed (any string) tcEmbed (any string) koEmbed (any string) See below. LW35 URWkb,URW,ADOBEkb,ADOBE (default URWkb) Adapt the font and file names of the standard 35 PostScript fonts. URWkb URW fonts with "berry" filenames (e.g. uhvbo8ac.pfb) URW URW fonts with "vendor" filenames (e.g. n019064l.pfb) ADOBEkb Adobe fonts with "berry" filenames (e.g. phvbo8an.pfb) ADOBE Adobe fonts with "vendor" filenames (e.g. hvnbo___.pfb) These options are only read and acted on by updmap; dvips, pdftex, etc., do not know anything about them. They work by changing the default map file which the programs read, so they can be overridden by specifying command-line options or configuration files to the programs, as explained at the beginning of updmap.cfg. The options jaEmbed and jaVariant (formerly kanjiEmbed and kanji- Variant) specify special replacements in the map lines. If a map contains the string @jaEmbed@, then this will be replaced by the value of that option; similarly for jaVariant. In this way, users of Japanese TeX can select different fonts to be included in the fi- nal output. The counterpart for Simplified Chinese, Traditional Chinese and Korean fonts are scEmbed, tcEmbed and koEmbed respec- tively. ENVIRONMENT Explanation of trees and files normally used: If --cnffile is specified on the command line (can be given multiple times), its value(s) is(are) used. Otherwise, updmap reads all the updmap.cfg files found by running `kpsewhich -all updmap.cfg', in the order returned by kpsewhich (which is the order of trees defined in texmf.cnf). In either case, if multiple updmap.cfg files are found, all the maps mentioned in all the updmap.cfg files are merged. Thus, if updmap.cfg files are present in all trees, and the default layout is used as shipped with TeX Live, the following files are read, in the given order. For updmap-sys: TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg For updmap-user: TEXMFCONFIG $HOME/.texliveYYYY/texmf-config/web2c/updmap.cfg TEXMFVAR $HOME/.texliveYYYY/texmf-var/web2c/updmap.cfg TEXMFHOME $HOME/texmf/web2c/updmap.cfg TEXMFSYSCONFIG $TEXLIVE/YYYY/texmf-config/web2c/updmap.cfg TEXMFSYSVAR $TEXLIVE/YYYY/texmf-var/web2c/updmap.cfg TEXMFLOCAL $TEXLIVE/texmf-local/web2c/updmap.cfg TEXMFDIST $TEXLIVE/YYYY/texmf-dist/web2c/updmap.cfg (where YYYY is the TeX Live release version). According to the actions, updmap might write to one of the given files or create a new updmap.cfg, described further below. Where and which updmap.cfg changes are saved: When no options are given, the updmap.cfg file(s) are only read, not written. It's when an option --setoption, --enable or --disable is specified that an updmap.cfg needs to be updated. In this case: 1) If config files are given on the command line, then the first one given is used to save any such changes. 2) If the config files are taken from kpsewhich output, then the al- gorithm is more complex: 2a) If $TEXMFCONFIG/web2c/updmap.cfg or $TEXMFHOME/web2c/updmap.cfg appears in the list of used files, then the one listed first by kpsewhich --all (equivalently, the one returned by kpsewhich up- dmap.cfg), is used. 2b) If neither of the above two are present and changes are made, a new config file is created in $TEXMFCONFIG/web2c/updmap.cfg. In general, the idea is that if the user cannot write to a given config file, a higher-level one can be used. That way, the distrib- ution's settings can be overridden system-wide using TEXMFLOCAL, and system settings can be overridden again in a particular user's TEXMFHOME or TEXMFCONFIG. Resolving multiple definitions of a font: If a font is defined in more than one map file, then the definition coming from the first-listed updmap.cfg is used. If a font is de- fined multiple times within the same map file, one is chosen arbi- trarily. In both cases a warning is issued. Disabling maps: updmap.cfg files with higher priority (listed earlier) can disable maps mentioned in lower priority (listed later) updmap.cfg files by writing, e.g., #! Map mapname.map or #! MixedMap mapname.map in the higher-priority updmap.cfg file. (The #! must be at the beginning of the line, with at least one space or tab afterward, and whitespace between each word on the list.) As an example, suppose you have a copy of MathTime Pro fonts and want to disable the Belleek version of the fonts; that is, disable the map belleek.map. You can create the file $TEXMFCONFIG/web2c/up- dmap.cfg with the content #! Map belleek.map Map mt-plus.map Map mt-yy.map and call updmap. Listing of maps: The two options --listmaps and --listavailablemaps list all maps de- fined in any of the updmap.cfg files (for --listmaps), and only those actually found on the system (for --listavailablemaps). The output format is one line per font map, with the following fields separated by tabs: map, type (Map, MixedMap, KanjiMap), status (en- abled, disabled), origin (the updmap.cfg file where it is mentioned, or 'builtin' for the three basic maps). In the case of --listmaps there can be one additional fields (again separated by tab) containing '(not available)' for those map files that cannot be found. updmap-user vs. updmap-sys: When updmap-sys is run, TEXMFSYSCONFIG and TEXMFSYSVAR are used in- stead of TEXMFCONFIG and TEXMFVAR, respectively. This is the pri- mary difference between updmap-sys and updmap-user. Other locations may be used if you give them on the command line, or these trees don't exist, or you are not using the original TeX Live. To see the precise locations of the various files that will be read and written, give the -n option (or read the source). EXAMPLES The log file is written to TEXMFVAR/web2c/updmap.log. For step-by-step instructions on making new fonts known to TeX, read https://tug.org/fonts/fontinstall.html. For even more terse instructions, read the beginning of the main updmap.cfg file. FILES Configuration and input files: updmap.cfg Main configuration file. In texmf-dist/web2c by default, but may be located elsewhere depending on your distribution. Each texmf tree read should have its own updmap.cfg. dvips35.map Map file for standard 35 PostScript fonts for use with dvips(1). pdftex35.map Map file for standard 35 PostScript fonts for use with pdftex(1). ps2pk35.map Map file for standard 35 PostScript fonts for use with ps2pk(1). Output files: psfonts.map For dvips(1). Same as psfonts_t1.map if option dvipsPreferOutline active, else as psfonts_pk.map. psfonts_pk.map For dvips(1). Without information from MixedMap files. (Setting of dvipsPreferOutline ignored.) psfonts_t1.map For dvips(1). With information from MixedMap files. (Setting of dvipsPreferOutline ignored.) download35.map For dvips(1). Always downloads the standard 35 fonts. (Setting of dvipsDownloadBase35 ignored.) builtin35.map For dvips(1). Never downloads the standard 35 fonts. (Setting of dvipsDownloadBase35 ignored.) pdftex.map For pdftex(1). Same as pdftex_dl14.map if option pdftexDownload- Base14 active, else as pdftex_ndl14.map. pdftex_dl14.map For pdftex(1). Always downloads the standard 14 fonts. pdftex_ndl14.map For pdftex(1). Never downloads the standard 14 fonts. ps2pk.map Similar to psfonts.map file, but forces all fonts to be downloaded, so this map file can be used with xdvi(1) and ps2pk(1). Configuration files for dvips(1): config.builtin35 Loads builtin35.map instead of psfonts.map. config.download35 Loads download35.map instead of psfonts.map. config.outline Loads psfonts_t1.map instead of psfonts.map. config.pdf Loads psfonts_t1.map instead of psfonts.map and has additional set- tings for PDF generation. config.pk Loads psfonts_pk.map instead of psfonts.map. config.www Loads psfonts_t1.map instead of psfonts.map. (For compatibility with old versions.) config.gstopk Loads psfonts_t1.map instead of psfonts.map. REPORTING BUGS Report bugs to: tex-live@tug.org TeX Live home page: <https://tug.org/texlive/> TeX Live February 2025 UPDMAP(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | EXAMPLES | FILES | REPORTING BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=updmap&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>