FreeBSD Manual Pages
VARNISHNCSA(1) General Commands Manual VARNISHNCSA(1) NAME varnishncsa - Display Varnish logs in Apache / NCSA combined log format SYNOPSIS varnishncsa [-a] [-b] [-c] [-C] [-d] [-D] [-E] [-F <format>] [-f <for- matfile>] [-g <request|vxid>] [-h] [-j] [-k <num>] [-L <limit>] [-n <workdir>] [-P <file>] [-Q <file>] [-q <query>] [-r <filename>] [-R <limit[/duration]>] [-t <seconds|off>] [-V] [-w <filename>] DESCRIPTION The varnishncsa utility reads varnishd(1) shared memory logs and presents them in the Apache / NCSA "combined" log format. Each log line produced is based on a single Request type transaction gathered from the shared memory log. The Request transaction is then scanned for the relevant parts in order to output one log line. To fil- ter the log lines produced, use the query language to select the ap- plicable transactions. Non-request transactions are ignored. The following options are available: -a When writing output to a file, append to it rather than over- write it. This option has no effect without the -w option. -b Log backend requests. If -c is not specified, then only backend requests will trigger log lines. -c Log client requests. This is the default. If -b is specified, then -c is needed to also log client requests -C Do all regular expression and string matching caseless. -d Process log records at the head of the log and exit. -D Daemonize. -E Show ESI requests, implies client mode. -F <format> Set the output log format string. -f <formatfile> Read output format from a file. Will read a single line from the specified file, and use that line as the format. -g <request|vxid> The grouping of the log records. The default is to group by vxid. -h Print program usage and exit -j Make format-specifier replacements JSON-compatible. When escap- ing characters, use JSON-style \uXXXX escape sequences instead of C-style \xXX sequences. Empty strings will be replaced with "" instead of "-", and empty integers will be replaced with null. Use -F or -f in combination with -j to write JSON logs. -k <num> Process this number of matching log transactions before exiting. -L <limit> Sets the upper limit of incomplete transactions kept before the oldest transaction is force completed. A warning record is syn- thesized when this happens. This setting keeps an upper bound on the memory usage of running queries. Defaults to 1000 transac- tions. -n <workdir> Specify the varnish working directory of the instance to attach to. See varnishd(1) -n option documentation for additional in- formation and defaults. -P <file> Write the process' PID to the specified file. -Q <file> Specifies the file containing the VSL query to use. When multi- ple -Q or -q options are specified, all queries are considered as if the 'or' operator was used to combine them. -q <query> Specifies the VSL query to use. When multiple -q or -Q options are specified, all queries are considered as if the 'or' opera- tor was used to combine them. -r <filename> Read log in binary file format from this file. The file can be created with varnishlog -w filename. If the filename is -, logs are read from the standard input. and cannot work as a daemon. -R <limit[/duration]> Restrict the output to the specified limit. Transactions exceed- ing the limit will be suppressed. The limit is specified as the maximum number of transactions (with respect to the chosen grouping method) and an optional time period. If no duration is specified, a default of s is used. The duration field can be formatted as in VCL (e.g. -R 10/2m) or as a simple time period without the prefix (e.g. -R 5/m). When in -g raw grouping mode, this setting can not be used alongside -i, -I, -x or -X, and we advise using -q instead. -t <seconds|off> Timeout before returning error on initial VSM connection. If set the VSM connection is retried every 0.5 seconds for this many seconds. If zero the connection is attempted only once and will fail immediately if unsuccessful. If set to "off", the connec- tion will not fail, allowing the utility to start and wait in- definitely for the Varnish instance to appear. Defaults to 5 seconds. -V Print version information and exit. -w <filename> Redirect output to file. The file will be overwritten unless the -a option was specified. If the application receives a SIGHUP in daemon mode the file will be reopened allowing the old one to be rotated away. This option is required when running in daemon mode. If the filename is -, varnishncsa writes to the standard output and cannot work as a daemon. --optstring Print the optstring parameter to getopt(3) to help writing wrap- per scripts. MODES The default mode of varnishncsa is "client mode". In this mode, the log will be similar to what a web server would produce in the absence of varnish. Client mode can be explicitly selected by using -c. If the -b switch is specified, varnishncsa will operate in "backend mode". In this mode, requests generated by varnish to the backends will be logged. Unless -c is also specified, client requests received by varnish will be ignored. When running varnishncsa in both backend and client mode, it is strongly advised to include the format specifier %{Varnish:side}x to distinguish between backend and client requests. Client requests that results in a pipe (ie. return(pipe) in vcl), will not generate logging in backend mode. This is because varnish is not generating requests, but blindly passes on bytes in both directions. However, a varnishncsa instance running in normal mode can see this case by using the formatter %{Varnish:handling}x, which will be 'pipe'. In backend mode, some of the fields in the format string get different meanings. Most notably, the byte counting formatters (%b, %I, %O) con- siders varnish to be the client. It is possible to keep two varnishncsa instances running, one in back- end mode, and one in client mode, logging to different files. FORMAT Specify the log format to use. If no format is specified the default log format is used: %h %l %u %t "%r" %s %b "%{Referer}i" "%{User-agent}i" Escape sequences \n and \t are supported. Supported formatters are: %b In client mode, size of response in bytes, excluding HTTP head- ers. In backend mode, the number of bytes received from the backend, excluding HTTP headers. In CLF format, i.e. a '-' rather than a 0 when no bytes are sent. %D In client mode, time taken to serve the request, in microsec- onds. In backend mode, time from the request was sent to the entire body had been received. This is equivalent to %{us}T. %H The request protocol. Defaults to HTTP/1.0 if not known. %h Remote host. Defaults to '-' if not known. In backend mode this is the IP of the backend server. %I In client mode, total bytes received from client. In backend mode, total bytes sent to the backend. %{X}i The contents of request header X. If the header appears multiple times in a single transaction, the last occurrence is used. %l Remote logname. Always '-'. %m Request method. Defaults to '-' if not known. %{X}o The contents of response header X. If the header appears multi- ple times in a single transaction, the last occurrence is used. %O In client mode, total bytes sent to client. In backend mode, total bytes received from the backend. %q The query string. Defaults to an empty string if not present. %r The first line of the request. Synthesized from other fields, so it may not be the request verbatim. See the NOTES section. %s Status sent to the client. In backend mode, status received from the backend. %t In client mode, time when the request was received, in HTTP date/time format. In backend mode, time when the request was sent. %{X}t In client mode, time when the request was received, in the for- mat specified by X. In backend mode, time when the request was sent. The time specification format is the same as for strf- time(3) with these extensions: • %{sec}: number of seconds since the Epoch • %{msec}: number of milliseconds since the Epoch • %{usec}: number of milliseconds since the Epoch • %{msec_frac}: millisecond fraction • %{usec_frac}: microsecond fraction The extensions cannot be combined with each other or strftime(3) in the same specification. Use multiple %{X}t specifications in- stead. %T In client mode, time taken to serve the request, in seconds. In backend mode, time from the request was sent to the entire body had been received. This is equivalent to %{s}T. %{X}T In client mode, time taken to serve the request, in the format specified by X. In backend mode, time from the request was sent to the entire body had been received. The time specification format can be one of the following: s (same as %T), ms or us (same as %D). %U The request URL without the query string. Defaults to '-' if not known. %u Remote user from auth. %{X}x Extended variables. Supported variables are: Varnish:default_format The log format used when neither -f nor -F options are specified. Useful for appending/prepending with other formatters. Varnish:time_firstbyte Time from when the request processing starts until the first byte is sent to the client, in seconds. For back- end mode: Time from the request was sent to the backend to the entire header had been received. Varnish:hitmiss In client mode, one of the 'hit' or 'miss' strings, de- pending on whether the request was a cache hit or miss. Pipe, pass and synth are considered misses. In backend mode, this field is blank. Varnish:handling In client mode, one of the 'hit', 'miss', 'pass', 'pipe' or 'synth' strings indicating how the request was han- dled. In backend mode, this field is blank. Varnish:side Backend or client side. One of two values, 'b' or 'c', depending on where the request was made. In pure backend or client mode, this field will be constant. Varnish:vxid The VXID of the varnish transaction. VCL_Log:key The value set by std.log("key:value") in VCL. VSL:tag:record-prefix[field] The value of the VSL entry for the given tag-record pre- fix-field combination. Tag is mandatory, the other compo- nents are optional. The record prefix will limit the matches to those records that have this prefix as the first part of the record content followed by a colon. The field will, if present, treat the log record as a white space separated list of fields, and only the nth part of the record will be matched against. Fields start counting at 1 and run up to 255. Defaults to '-' when the tag is not seen, the record pre- fix does not match or the field is out of bounds. If a tag appears multiple times in a single transaction, the first occurrence is used. SIGNALS • SIGHUP Rotate the log file (see -w option) in daemon mode, abort the loop and die gracefully when running in the foreground. • SIGUSR1 Flush any outstanding transactions. NOTES The %r formatter is equivalent to "%m <http:/> /%{Host}i%U%q %H". This differs from apache's %r behavior, equivalent to "%m %U%q %H". Fur- thermore, when using the %r formatter, if the Host header appears mul- tiple times in a single transaction, the first occurrence is used. EXAMPLE Log the second field of the Begin record, corresponding to the VXID of the parent transaction: varnishncsa -F "%{VSL:Begin[2]}x" Log the entire Timestamp record associated with the processing length: varnishncsa -F "%{VSL:Timestamp:Process}x" Log in JSON, using the -j flag to ensure that the output is valid JSON for all inputs: varnishncsa -j -F '{"size": %b, "time": "%t", "ua": "%{User-Agent}i"}' SEE ALSO varnishd(1) varnishlog(1) varnishstat(1) vsl-query(7) vsl(7) HISTORY The varnishncsa utility was developed by Poul-Henning Kamp in coopera- tion with Verdens Gang AS and Varnish Software AS. This manual page was initially written by Dag-Erling Smrgrav < <des@des.no> >, and later up- dated by Martin Blix Grydeland and Pl Hermunn Johansen. COPYRIGHT This document is licensed under the same licence as Varnish itself. See LICENCE for details. • Copyright (c) 2006 Verdens Gang AS • Copyright (c) 2006-2016 Varnish Software AS VARNISHNCSA(1)
NAME | SYNOPSIS | DESCRIPTION | MODES | FORMAT | SIGNALS | NOTES | EXAMPLE | SEE ALSO | HISTORY | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=varnishncsa&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>