FreeBSD Manual Pages
VIS(1) General Commands Manual VIS(1) NAME vis -- a highly efficient text editor SYNOPSIS vis [-v] [+command] [--] [files ...] DESCRIPTION vis is a highly efficient screen-oriented text editor combining the strengths of both vi(m) and sam. This manual page is intended for users already familiar with vi/sam. Anyone else should almost certainly read a good tutorial on either editor before this manual page. The following op- tions are available: -v Print version information and exit. +command Execute command after loading file. -- Denotes the end of the options. Arguments after this will be han- dled as a file name. The special file - instructs vis to read from standard input in which case :wq will write to standard output, thereby enabling usage as an interactive filter. If standard input is redirected and all input is consumed, vis will open /dev/tty to gather further commands. Failure to do so results in program termination. Selections vis uses selections as core editing primitives. A selection is a non- empty, directed range with two endpoints called cursor and anchor. A se- lection can be anchored in which case the anchor remains fixed while only the position of the cursor is adjusted. For non-anchored selections both endpoints are updated. A singleton selection covers one character on which both cursor and anchor reside. There always exists a primary selection which remains visible (i.e. changes to its position will adjust the view- port). Modes vis employs the same modal editing approach as vi. It supports a `normal', `operator pending', `insert', `replace' and `visual' (in both line and character wise variants) mode. The visual block and ex modes are deliber- ately not implemented, instead vis has built in support for multiple selec- tions and an interactive variant of the structural regular expression based command language of sam. In normal mode all selections are non-anchored and reduced to a single character. Undo/Redo vis uses an undo tree to keep track of text revisions. The u (undo) and <C-r> (redo) commands can be used to traverse the tree along the main branch. g+ and g- traverse the history in chronological order. The :earlier and :later commands provide means to restore the text to an arbi- trary state. Marks A mark associates a symbolic name to a set of selections. A stored selec- tion becomes invalid when its delimiting boundaries change in the underly- ing buffer. If said changes are later undone the mark becomes valid again. m sets a mark, M restores it. For example, 'am sets the mark a while 'aM restores it. Use of m or M without specifying a mark uses the default mark. Available marks are: '' default mark '^ active selections when leaving visual mode 'a-'z general purpose marks No marks across files are supported. Marks are not preserved over editing sessions. Jump list A per window, fixed sized file local jump list exists which stores marks (i.e. set of selections). g< jump backward g> jump forward gs save currently active selections Registers Registers are named lists of text. Uninitialized register slots default to the empty string. Available registers are: "" default register "a-"z general purpose registers "A-"Z append to corresponding general purpose register "*, "+ system clipboard integration via shell script vis-clipboard(1) "0 yank register, most recently yanked range "1-"9 "& sub expression matches of most recent x or y command "/ search register, most recently used search pattern ": command register, most recently executed command "_ black hole (/dev/null) register, ignore content is always empty "# selection number (readonly) If no explicit register is specified the default register is used. Macros The general purpose registers "a-"z can be used to record macros. Use one of "A-"Z to append to an existing macro. q starts a recording, @ plays it back. @@ refers to the most recently recorded macro. @: repeats the last :-command. @/ is equivalent to n in normal mode. These operations always use the first register slot. Encoding, Tab and Newline handling vis always assumes the input file to be UTF-8 encoded with \n line endings. If you wish to edit files with legacy encodings or non-Unix line endings, use iconv(1) and dos2unix(1) to convert them as needed. <Tab> can option- ally be expanded to a configurable number of spaces (see "SET OPTIONS"). Mouse support The mouse is currently not used at all. SAM COMMANDS vis supports an interactive variant of the structural regular expression based command language introduced by sam(1). Regular expressions vis currently defers regular expression matching to the underlying C li- brary. It uses what POSIX refers to as "Extended Regular Expressions" as described in regex(7). The anchors ^ and $ match the beginning / end of the range they are applied to. Additionally \n and \t may be used to refer to newlines and tabs, respectively. The . atom matches any character ex- cept newline. The empty regular expression stands for the last complete expression encountered. Addresses An address identifies a substring (or range) in a file. In the following "character n" means the null string after the n-th character in the file, with 1 the first character in the file. "Line n" means the n-th match, starting at the beginning of the file, of the regular expression ".*\n?". All windows always have at least one current substring which is the default address. In sam this is referred to as dot. In vis multiple "dots" (or selections) can exist at the same time. Simple addresses #n The empty string after character n; #0 is the beginning of the file. n Line n. /regexp/ ?regexp? The substring that matches the regular expression, found by looking towards the end (/) or beginning (?) of the file. The search does not wrap around when hitting the end (start) of the file. 0 The string before the first full line. This is not necessarily the null string; see + and - below. $ The null string at the end of the file. . Dot, the current range. 'm The mark m in the file. Compound addresses In the following, a1 and a2 are addresses. a1+a2 The address a2 evaluated starting at the end of a1. a1-a2 The address a2 evaluated looking the reverse direction starting at the beginning of a1. a1,a2 The substring from the beginning of a1 to the end of a2. If a1 is missing, 0 is substituted. If a2 is missing, $ is substituted. a1;a2 Like a1,a2 but with a2 evaluated at the end of, and range set to, a1. The operators + and - are high precedence, while , and ; are low prece- dence. In both + and - forms, if a2 is a line or character address with a missing number, the number defaults to 1. If a1 is missing, . is substituted. If both a1 and a2 are present and distinguishable, + may be elided. a2 may be a regular expression; if it is delimited by ? characters, the effect of the + or - is reversed. The % sign is an alias for , and hence 0,$. It is an error for a compound address to represent a malformed substring. Commands In the following, text demarcated by slashes represents text delimited by any printable ASCII character except alphanumerics. Any number of trailing delimiters may be elided, with multiple elisions then representing null strings, but the first delimiter must always be present. In any delimited text, newline may not appear literally; \n and \t may be typed for newline and tab; \/ quotes the delimiter, here /. An ampersand & and \n, where n is a digit (1-9) are replaced by the corresponding register. Backslash is otherwise interpreted literally. Most commands may be prefixed with an address to indicate their range of operation. If a command takes an address and none is supplied, a default address is used. In normal mode this equates to the character the selec- tion is currently over. If only one selection exists x and y default to the whole file 0,$. In normal mode the write commands w and wq always ap- ply to the whole file. Commands are executed once for every selection. In visual mode the commands are applied to every selection as if an implicit x command, matching the existing selections, was present. In the description, "range" is used to represent whatever address is sup- plied. Many commands create new selections as a side effect when issued from a vi- sual mode. If so, it is always to the aresulta of the change: the new text for an insertion, the empty string for a deletion, the command output of a filter etc. If after a successful command execution no selections remain, the editor will switch to normal mode, otherwise it remains in visual mode. This allows interactive refinements of ranges. Text commands a[count]/text/ Insert the text count times into the file after the range. May also be written as a lines of text . c or i Same as a, but c replaces the text, while i inserts before the range. d Delete the text in range. Display commands p Create a new selection for the range. I/O commands e[!] [file name] Replace the file by the contents of the named external file. If no file name is given, reload file from disk. r file name Replace the text in the range by the contents of the named external file. w[!] [file name] Write the range (default 0,$) to the named external file. wq[!] [file name] Same as w, but close file afterwards. If the file name argument is absent from any of these, the current file name is used. e always sets the file name, w will do so if the file has no name. Forcing the e command with ! will discard any unsaved changes. Forcing w will overwrite the file on disk even if it has been externally modified since loading it. Write commands with a non-default addresses and no file name are destructive and need always to be forced. < shell command Replace the range by the standard output of the shell command. > shell command Sends the range to the standard input of the shell command. | shell command Send the range to the standard input, and replace it by the stan- dard output, of the shell command. ! shell command Run interactive shell command, redirect keyboard input to it. cd directory Change working directory. If no directory is specified, $HOME is used. In any of <, >, |, or !, if the shell command is omitted, the last shell command (of any type) is substituted. Unless the file being edited is un- named, all these external commands can refer to its absolute path and file name through the vis_filepath and vis_filename environment variables. Loops and conditionals x/regexp/ [command] For each match of the regular expression in the range, run the com- mand with range set to the match. If the regular expression and its slashes are omitted, /.*\n/ is assumed. Null string matches potentially occur before every character of the range and at the end of the range. The "1-"9 and "& registers are updated with the (sub) expression matches of the pattern. y/regexp/ [command] Like x, but run the command for each substring that lies before, between, or after the matches that would be generated by x. There is no default behavior. Null substrings potentially occur before every character in the range. X/regexp/ command For each file whose file name matches the regular expression, make that the current file and run the command. If the expression is omitted, the command is run in every file. Y/regexp/ command Same as X, but for files that do not match the regular expression, and the expression is required. g[count][/regexp/] command v[count][/regexp/] command If the count range contains (g) or does not contain (v) a match for the expression, run command on the range. The count specifier has the following format, where n and m are in- tegers denoting the ranges. n,m The closed interval from n to m. If n is missing, 1 is substituted. If m is missing, ^a is substituted. Negative values are interpreted relative to the last range. %n Matches every n-th range. These may be nested arbitrarily deeply. An empty command in an x or y de- faults to p. X, Y, g and v do not have defaults. Grouping and multiple changes Commands may be grouped by enclosing them in curly braces. Semantically, the opening brace is like a command: it takes an (optional) address and runs each sub-command on the range. Commands within the braces are exe- cuted sequentially, but changes made by one command are not visible to other commands. When a command makes a number of changes to a file, as in x/re/ c/text/, the addresses of all changes are computed based on the initial state. If the changes are non-overlapping, they are applied in the specified order. Conflicting changes are rejected. Braces may be nested arbitrarily. VI(M) KEY BINDINGS In the following sections angle brackets are used to denote special keys. The prefixes C-, S-, and M- are used to refer to the <Ctrl>, <Shift> and <Alt> modifiers, respectively. All active key bindings can be listed at runtime using the :help command. Operators Operators perform a certain operation on a text range indicated by either a motion, a text object or an existing selection. When used in normal mode, the following operators wait for a motion, putting vis into operator pending mode. c change, delete range and enter insert mode d delete, cut range to register < shift-left, decrease indent > shift-right, increase indent y yank, copy range to register When used in normal mode, the following actions take effect immediately. = format, filter range through fmt(1) gu make lowercase gU make uppercase g~ swap case J join lines, insert spaces in between gJ join lines remove any delimiting white spaces p put register content after cursor P put register content before cursor Motions Motions take an initial file position and transform it to a destination file position, thereby defining a range. 0 start of line b previous start of a word B previous start of a WORD $ end of line e next end of a word E next end of a WORD F<char> to next occurrence of <char> to the left f<char> to next occurrence of <char> to the right ^ first non-blank of line g0 begin of display line g$ end of display line ge previous end of a word gE previous end of a WORD gg begin of file G goto line or end of file gj display line down gk display line up gh codepoint left gl codepoint right gH byte left gL byte right g_ last non-blank of line gm middle of display line g| goto column h char left H goto top/home line of window j line down k line up l char right L goto bottom/last line of window % match bracket, quote or backtick } next paragraph ) next sentence N repeat last search backwards n repeat last search forward [{ previous start of block ]} next start of block [( previous start of parentheses pair ]) next start of parentheses pair { previous paragraph ( previous sentence ; repeat last to/till movement , repeat last to/till movement but in opposite direction # search word under selection backwards * search word under selection forwards T<char> till before next occurrence of <char> to the left t<char> till before next occurrence of <char> to the right ?pattern to next match of pattern in backward direction /pattern to next match of pattern in forward direction w next start of a word W next start of a WORD Text objects Text objects take an initial file position and transform it to a range where the former does not necessarily have to be contained in the latter. All of the following text objects are implemented in an inner variant (pre- fixed with i) where the surrounding white space or delimiting characters are not part of the resulting range and a normal variant (prefixed with a) where they are. w word W WORD s sentence p paragraph [, ], (, ), {, }, <, >, ", ', ` block enclosed by these symbols Further available text objects include: gn matches the last used search term in forward direction gN matches the last used search term in backward direction al current line il current line without leading and trailing white spaces Multiple Selections vis supports multiple selections with immediate visual feedback. There al- ways exists one primary selection located within the current view port. Additional selections can be created as needed. If more than one selection exists, the primary one is styled differently. To manipulate selections use in normal mode: <C-k> create count new selections on the lines above <C-M-k> create count new selections on the lines above the first selec- tion <C-j> create count new selections on the lines below <C-M-j> create count new selections on the lines below the last selec- tion <C-p> remove primary selection <C-n> select word the selection is currently over, switch to visual mode <C-u> make the count previous selection primary <C-d> make the count next selection primary <C-c> remove the count selection column <C-l> remove all but the count selection column <Tab> try to align all selections on the same column <Escape> dispose all but the primary selection The visual modes were enhanced to recognize: I create a selection at the start of every selected line A create a selection at the end of every selected line <Tab> left align selections by inserting spaces <S-Tab> right align selections by inserting spaces <C-a> create new selections everywhere matching current word or se- lection <C-n> create new selection and select next word matching current se- lection <C-x> clear (skip) current selection, but select next matching word <C-p> remove primary selection <C-u> <C-k> make the count previous selection primary <C-d> <C-j> make the count next selection primary <C-c> remove the count selection column <C-l> remove all but the count selection column + rotate selections rightwards count times - rotate selections leftwards count times _ trim selections, remove leading and trailing white space o flip selection direction, swap cursor and anchor <Escape> clear all selections, switch to normal mode In insert and replace mode: <S-Tab> align all selections by inserting spaces Selections can be manipulated using set operations. The first operand is the currently active selections while the second can be specified as a mark. For example, 'a| produces the union of the mark a and the current selection. Use of set operations without specifying a mark use the default mark as the first operand. | set union & set intersection \ set minus ~ set complement VI(M) COMMANDS Any unique prefix can be used to abbreviate a command. File and Window management A file must be opened in at least one window. If the last window display- ing a certain file is closed all unsaved changes are discarded. Windows are equally sized and can be displayed in rows (horizontally) or in columns (vertically). The <C-w> h, <C-w> j, <C-w> k and <C-w> l key mappings can be used to switch between windows. :new open an empty window, arranged as a new row (horizontally) :vnew open an empty window, arranged as a new column (vertically) :open[!] [file name] open a new window, displaying file name if given :split [file name] split window into rows (horizontally) :vsplit [file name] split window into columns (vertically) :q[!] [exit code] close currently focused window :qall[!] [exit code] close all windows, terminate editor with exit code (defaults to 0) Commands taking a file name will invoke the vis-open(1) utility, if given a file pattern or directory. Runtime key mappings vis supports global as well as window local run time key mappings which are always evaluated recursively. :map[!] mode lhs rhs add a global key mapping :map-window[!] mode lhs rhs add a window local key mapping :unmap mode lhs remove a global key mapping :unmap-window mode lhs remove a window local key mapping In the above mode refers to one of `normal', `insert', `replace', `visual', `visual-line' or `operator-pending'; lhs refers to the key to map and rhs is a key action or alias. An existing mapping may be overridden by forcing the map command by specifying !. Because key mappings are always recursive, doing something like: :map! normal j 2j will not work because it would enter an endless loop. Instead, vis uses pseudo keys referred to as key actions which can be used to invoke a set of available editor functions. :help lists all currently active key bindings as well as all available symbolic keys. Keyboard Layout Specific Mappings In order to facilitate usage of non-latin keyboard layouts, vis allows one to map locale specific keys to their latin equivalents by means of the :langmap locale-keys latin-keys command. As an example, the following maps the movement keys in Russian layout: :langmap ~NDh3/4Dh>>Dh' hjkl If the key sequences have not the same length, the remainder of the longer sequence will be discarded. The defined mappings take effect in all non-input modes, i.e. everywhere except in insert and replace mode. Undo/Redo :earlier [count] revert to older text state :later [count] revert to newer text state If count is suffixed by either of d (days), h (hours), m (minutes) or s (seconds) it is interpreted as an offset from the current system time and the closest available text state is restored. SET OPTIONS There are a small number of options that may be set (or unset) to change the editor's behavior using the :set command. This section describes the options, their abbreviations and their default values. Boolean options can be toggled by appending ! to the option name. In each entry below, the first part of the tag line is the full name of the option, followed by any equivalent abbreviations. The part in square brackets is the default value of the option. shell ["/bin/sh"] User shell to use for external commands, overrides SHELL and shell field of password database /etc/passwd escdelay [50] Milliseconds to wait before deciding whether an escape sequence should be treated as an <Escape> key. tabwidth, tw [8] Display width of a tab and number of spaces to use if expandtab is enabled. autoindent, ai [off] Automatically indent new lines by copying white space from previous line. expandtab, et [off] Whether <Tab> should be expanded to tabwidth spaces. number, nu [off] Display absolute line numbers. relativenumbers, rnu [off] Display relative line numbers. cursorline, cul [off] Highlight line primary cursor resides on. colorcolumn, cc [0] Highlight a fixed column. horizon [32768] How many bytes back the lexer will look to synchronize parsing. theme ["default-16" or "default-256"] Color theme to use, name without file extension. Loaded from a themes/ sub directory of the paths listed in the "FILES" section. syntax [auto] Syntax highlighting lexer to use, name without file extension. showtabs [off] Whether to display replacement symbol instead of tabs. shownewlines [off] Whether to display replacement symbol instead of newlines. showspaces [off] Whether to display replacement symbol instead of blank cells. showeof [on] Whether to display replacement symbol for lines after the end of the file. savemethod [auto] How the current file should be saved, atomic which uses rename(2) to atomically replace the file, inplace which truncates the file and then rewrites it or auto which tries the former before falling back to the latter. The rename method fails for symlinks, hardlinks, in case of insufficient directory permissions or when either the file owner, group, POSIX ACL or SELinux labels can not be restored. loadmethod [auto] How existing files should be loaded, read which copies the file content to an independent in-memory buffer, mmap which memory maps the file from disk and uses OS capabilities as caching layer or auto which tries the former for files smaller than 8Mb and the lat- ter for lager ones. WARNING: modifying a memory mapped file in- place will cause data loss. layout ["v" or "h"] Whether to use vertical or horizontal layout. ignorecase, ic [off] Whether to ignore case when searching. wrapcolumn, wc [0] Wrap lines at minimum of window width and wrapcolumn. breakat, brk [""] Characters which might cause a word wrap. COMMAND and SEARCH PROMPT The command and search prompt as opened by :, /, or ? is implemented as a single line height window, displaying a regular file whose editing starts in insert mode. <Escape> switches to normal mode, a second <Escape> can- cels the prompt. <Up> enlarges the window, giving access to the command history. <C-v> <Enter> inserts a literal new line thus enabling multiline commands. <Enter> executes the visual selection if present, or else every- thing in the region spawned by the selection position and the delimiting prompt symbols at the start of adjacent lines. CONFIGURATION vis uses Lua for configuration and scripting purposes. During startup visrc.lua (see the "FILES" section) is sourced which can be used to set personal configuration options. As an example the following will enable the display of line numbers: vis:command('set number') ENVIRONMENT VIS_PATH The default path to use to load Lua support files. HOME The home directory used for the cd command if no argument is given. TERM The terminal type to use to initialize the curses interface, de- faults to xterm if unset. SHELL The command shell to use for I/O related commands like !, >, < and |. XDG_CONFIG_HOME The configuration directory to use, defaults to $HOME/.config if unset. ASYNCHRONOUS EVENTS SIGSTOP Suspend editor. SIGCONT Resume editor. SIGBUS An mmap(2) ed file got truncated, unsaved file contents will be lost. SIGHUP SIGTERM Restore initial terminal state. Unsaved file contents will be lost. SIGINT When an interrupt occurs while an external command is being run it is terminated. SIGWINCH The screen is resized. FILES Upon startup vis will source the first visrc.lua configuration file found from these locations. All actively used paths can be listed at runtime us- ing the :help command. * $VIS_PATH * The location of the vis binary (on systems where /proc/self/exe is available). * $XDG_CONFIG_HOME/vis where XDG_CONFIG_HOME refers to $HOME/.config if unset. * /usr/local/etc/vis for a system-wide configuration provided by adminis- trator. * /usr/local/share/vis or /usr/share/vis depending on the build configu- ration. When creating a new visrc.lua be sure to copy the structure from here. EXIT STATUS The vis utility exits 0 on success, and >0 if an error occurs. EXAMPLES Use vis as an interactive filter. $ { echo Pick your number; seq 1 10; } | vis - > choice Use the vis-open(1) based file browser to list all C language source files: :e *.c Spawn background process and pipe range to its standard input: :> { plumber <&3 3<&- & } 3<&0 1>&- 2>&- SEE ALSO sam(1), vi(1), vis-clipboard(1), vis-complete(1), vis-digraph(1), vis- menu(1), vis-open(1) A Tutorial for the Sam Command Language by Rob Pike The Text Editor sam by Rob Pike Plan 9 manual page for sam(1) Structural Regular Expressions by Rob Pike vi - screen-oriented (visual) display editor IEEE Std 1003.1 ("POSIX.1") STANDARDS vis does not strive to be IEEE Std 1003.1 ("POSIX.1") compatible, but shares obvious similarities with the vi utility. AUTHORS vis is written by Marc AndrA(C) Tanner <mat at brain-dump.org> BUGS On some systems there already exists a vis binary, thus causing a name con- flict. Vis 0.9 January 14, 2017 VIS(1)
NAME | SYNOPSIS | DESCRIPTION | SAM COMMANDS | VI(M) KEY BINDINGS | VI(M) COMMANDS | SET OPTIONS | COMMAND and SEARCH PROMPT | CONFIGURATION | ENVIRONMENT | ASYNCHRONOUS EVENTS | FILES | EXIT STATUS | EXAMPLES | SEE ALSO | STANDARDS | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=vise&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>