FreeBSD Manual Pages
WIMAPPLY(1) User Commands WIMAPPLY(1) NAME wimapply - Apply a WIM image SYNOPSIS wimapply WIMFILE [IMAGE] TARGET [OPTION...] DESCRIPTION wimapply, or equivalently wimlib-imagex apply, extracts ("applies") an image, or all images, from the Windows Imaging (WIM) archive WIMFILE. IMAGE specifies the image in WIMFILE to extract. It may be the 1-based index of an image, the name of an image, or the keyword "all" to spec- ify all images. It may be omitted if WIMFILE contains only one image. You can use wiminfo(1) to list the images contained in WIMFILE. TARGET specifies where to extract the image(s) to. If TARGET is a di- rectory, then the image(s) will be extracted to that directory as per DIRECTORY EXTRACTION (UNIX) or DIRECTORY EXTRACTION (WINDOWS). If TAR- GET does not exist, then a directory will be created there first. Al- ternatively, if TARGET specifies a UNIX block device, then the image will be extracted to it as described in NTFS VOLUME EXTRACTION (UNIX). Note that wimapply is designed to extract, or "apply", full WIM images. If you instead want to extract only certain files or directories from a WIM image, use wimextract(1) instead. If IMAGE is "all", then all images in WIMFILE will be extracted into subdirectories of TARGET named after the images, falling back to the image index when an image has no name or an unusual name. This is not yet supported in NTFS VOLUME EXTRACTION (UNIX) mode. If WIMFILE is "-", then the WIM is read from standard input rather than from disk. See PIPABLE WIMS for more information. DIRECTORY EXTRACTION (UNIX) On UNIX-like systems, a WIM image may be extracted to a directory. This mode has the limitation that NTFS or Windows-specific metadata will not be extracted. Although some concepts such as hard links, sym- bolic links, last access timestamps, and last modification timestamps will be translated to their UNIX equivalents, other metadata will be lost (with warnings given). Notably, the following types of metadata will not be extracted in this mode: • Windows file attribute flags • Windows security descriptors (e.g. file owners and DACLs) • File creation timestamps • Reparse points other than symbolic links and junction points • Named data streams • Short filenames (also known as 8.3 names or DOS names). • Object IDs These same limitations apply to wimextract. As such, this mode is most useful in situations where NTFS or Windows-specific metadata is unim- portant, e.g. when wanting to extract specific files, or when doing file archiving only on UNIX-like systems, possibly in combination with --unix-data. When Windows-specific metadata is important, then either the NTFS VOLUME EXTRACTION (UNIX) mode should be used, or the Windows version of wimlib should be used (see DIRECTORY EXTRACTION (WINDOWS)). NTFS VOLUME EXTRACTION (UNIX) On UNIX-like systems, TARGET may also be specified as a block device (e.g. /dev/sda3) containing an unmounted NTFS volume. In this mode, wimapply uses libntfs-3g to apply the specified WIM image to the root directory of the NTFS volume. The target volume should be empty, e.g. newly created by mkntfs(8). In this mode, NTFS-specific and Windows- specific data and metadata will be extracted, including the following: • All data streams of all files except encrypted files, including the unnamed data stream as well as all named data streams. • Reparse points, including symbolic links, junction points, and other reparse points. • File and directory creation, access, and modification timestamps, using the native NTFS resolution of 100 nanoseconds. • Windows security descriptors, including all components (owner, group, DACL, and SACL). • Windows file attribute flags • All names of all files, including names in the Win32 namespace, DOS namespace, Win32+DOS namespace, and POSIX namespace. This includes hard links. • Object IDs. However, encrypted files will not be extracted. Restoring extended attributes (EAs) is also not yet supported in this mode. Regardless, since almost all information from the WIM image is restored in this mode, it is possible (and fully supported) to restore an image of an actual Windows installation using wimapply on a UNIX-like system as an alternative to using wimapply or DISM on Windows. In the EXAM- PLES section below, there is an example of applying an image from an "install.wim" file as may be found in the Windows installation media. Note that to actually boot Windows (Vista or later) from an applied "install.wim" image, you also need to mark the partition as "bootable" and set up various boot files, such as \BOOTMGR and \BOOT\BCD. The latter task is most easily accomplished by running bcdboot.exe from a live Windows system such as Windows PE, but there are other options as well. Finally, note that this mode uses libntfs-3g directly, without going through the ntfs-3g(8) driver. Hence, there is no special support for applying a WIM image to a directory on which an NTFS filesystem has been mounted using ntfs-3g(8); you have to unmount it first. There is also no support for applying a WIM image to some subdirectory of the NTFS volume; you can only apply to the root directory. DIRECTORY EXTRACTION (WINDOWS) On Windows, wimapply (and wimextract) natively support NTFS and Win- dows-specific metadata. For best results, the target directory should be located on an NTFS volume and the program should be run with Admin- istrator privileges; however, non-NTFS filesystems and running without Administrator privileges are also supported, subject to limitations. On Windows, wimapply tries to extract as much data and metadata as pos- sible, including: • All data streams of all files. This includes the default file con- tents, as well as named data streams if supported by the target volume. • Reparse points, including symbolic links, junction points, and other reparse points, if supported by the target volume. Restoring symlinks requires Administrator privileges. Also see --rpfix and --norpfix for details on how absolute symbolic links and junctions are extracted. • File and directory creation, access, and modification timestamps, to the highest resolution supported by the target volume. • Security descriptors, if supported by the filesystem and --no-acls is not specified. Note that this, in general, requires Administra- tor privileges, and may be only partially successful if the program is run without Administrator privileges (see --strict-acls). • File attribute flags, including hidden, compressed, encrypted, sparse, etc, when supported by the filesystem. • Short filenames (also known as 8.3 names or DOS names). • Hard links, if supported by the target filesystem. • Object IDs, if supported by the target filesystem. • Extended attributes (EAs), if supported by the target filesystem. Additional notes about extracting files on Windows: • wimapply will issue warnings if unable to extract the exact meta- data and data of the WIM image due to limitations of the target filesystem. • Since encrypted files (with FILE_ATTRIBUTE_ENCRYPTED) are not stored in plaintext in the WIM image, wimapply cannot restore en- crypted files to filesystems not supporting encryption. Therefore, on such filesystems, encrypted files will not be extracted. Fur- thermore, even if encrypted files are restored to a filesystem that supports encryption, they will only be decryptable if the decryp- tion key is available. • Files with names that cannot be represented on Windows will not be extracted by default; see --include-invalid-names. • Files with full paths over 260 characters (the so-called MAX_PATH) will be extracted, but beware that such files will be inaccessible to most Windows software and may not be able to be deleted easily. • On Windows, unless the --no-acls option is specified, wimlib will attempt to restore files' security descriptors exactly as they are provided in the WIM image. Beware that typical Windows installa- tions contain files whose security descriptors do not allow the Ad- ministrator to delete them. Therefore, such files will not be able to be deleted, or in some cases even read, after extracting, unless processed with a specialized program that knows to acquire the SE_RESTORE_NAME and/or SE_BACKUP_NAME privileges which allow over- riding access control lists. This is not a bug in wimlib, which works as designed to correctly restore the data that was archived, but rather a problem with the access rights Windows uses on certain files. But if you just want the file data and don't care about se- curity descriptors, use --no-acls to skip restoring all security descriptors. • A similar caveat to the above applies to file attributes such as Readonly, Hidden, and System. By design, on Windows wimlib will restore such file attributes; therefore, extracted files may have those attributes. If this is not what you want, use the --no-at- tributes option. SPLIT WIMS You may use wimapply to apply images from a split WIM, or wimextract to extract files from a split WIM. The WIMFILE argument must specify the first part of the split WIM, while the additional parts of the split WIM must be specified in one or more --ref="GLOB" options. Since glob- bing is built into the --ref option, typically only one --ref option is necessary. For example, the names for the split WIM parts usually go something like: mywim.swm mywim2.swm mywim3.swm mywim4.swm mywim5.swm To apply the first image of this split WIM to the directory "dir", run: wimapply mywim.swm 1 dir --ref="mywim*.swm" PIPABLE WIMS wimapply also supports applying a WIM from a nonseekable file, such as a pipe, provided that the WIM was captured in the wimlib-specific pi- pable format using --pipable (see wimcapture(1)). To use standard in- put as the WIM, specify "-" as WIMFILE. A possible use of this feature is to apply a WIM image being streamed from the network. For example, to apply the first image from a WIM file available on a HTTP server to an NTFS volume on /dev/sda1, run something like: wget -O - https://myserver/mywim.wim | wimapply - 1 /dev/sda1 Pipable WIMs may also be split into multiple parts, just like normal WIMs. To apply a split pipable WIM from a pipe, the parts must be con- catenated and all written to the pipe. The first part must be sent first, but the remaining parts may be sent in any order. OPTIONS --check Before applying the image, verify the integrity of WIMFILE if it has extra integrity information. --ref="GLOB" File glob of additional WIMs or split WIM parts to reference re- sources from. See SPLIT_WIMS. This option can be specified mul- tiple times. Note: GLOB is listed in quotes because it is inter- preted by wimapply and may need to be quoted to protect against shell expansion. --rpfix, --norpfix Set whether to fix targets of absolute symbolic links (reparse points in Windows terminology) or not. When enabled (--rpfix), extracted absolute symbolic links that are marked in the WIM im- age as being fixed are assumed to have absolute targets relative to the image root, and therefore wimapply prepends the absolute path to the extraction target directory to their targets. The intention is that you can apply an image containing absolute sym- bolic links and still have them be valid after it has been ap- plied to any location. The default behavior is --rpfix if any images in WIMFILE have been captured with reparse-point fixups done. Otherwise, it is --norpfix. Reparse point fixups are never done in the NTFS volume extraction mode on UNIX-like systems. --unix-data (UNIX-like systems only) Restore UNIX-specific metadata and spe- cial files that were captured by wimcapture with the --unix-data option. This includes: standard UNIX file permissions (owner, group, and mode); device nodes, named pipes, and sockets; and ex- tended attributes (Linux-only). --no-acls Do not restore security descriptors on extracted files and direc- tories. --strict-acls Fail immediately if the full security descriptor of any file or directory cannot be set exactly as specified in the WIM file. If this option is not specified, when wimapply on Windows does not have permission to set a security descriptor on an extracted file, it falls back to setting it only partially (e.g. with SACL omitted), and in the worst case omits it entirely. However, this should only be a problem when running wimapply without Adminis- trator rights. Also, on UNIX-like systems, this flag can also be combined with --unix-data to cause wimapply to issue an error if UNIX permissions are unable to be applied to an extracted file. --no-attributes Do not restore Windows file attributes such as readonly, hidden, etc. --include-invalid-names Extract files and directories with invalid names by replacing characters and appending a suffix rather than ignoring them. Ex- actly what is considered an "invalid" name is platform-dependent. On POSIX-compliant systems, filenames are case-sensitive and may contain any byte except '\0' and '/', so on a POSIX-compliant system this option will only have an effect in the unlikely case that the WIM image for some reason has a filename containing one of these characters. On Windows, filenames are case-insensitive(*), cannot include control characters, and cannot include the characters '/', '\0', '\', ':', '*', '?', '"', '<', '>', or '|'. Ordinarily, files in WIM images should meet these conditions as well. However, it is not guaranteed, and in particular a WIM image captured with wim- capture on a POSIX-compliant system could contain such files. By default, invalid names will be ignored, and if there are multiple names differing only in case, one will be chosen to extract arbi- trarily; however, with --include-invalid-names, all names will be sanitized and extracted in some form. (*) Unless the ObCaseInsensitive setting has been set to 0 in the Windows registry, in which case certain software, including the Windows version of wimapply, will honor case-sensitive filenames on NTFS and other compatible filesystems. --wimboot Windows only: Instead of extracting the files themselves, extract "pointer files" back to the WIM archive(s). This can result in significant space savings. However, it comes at several poten- tial costs, such as not being able to delete the WIM archive(s) and possibly having slower access to files. See Microsoft's doc- umentation for "WIMBoot" for more information. If it exists, the [PrepopulateList] section of the file \Win- dows\System32\WimBootCompress.ini in the WIM image will be read. Files matching any of these patterns will be extracted normally, not as WIMBoot "pointer files". This is helpful for certain files that Windows needs to read early in the boot process. This option only works when the program is run as an Administra- tor and the target volume is NTFS or another filesystem that sup- ports reparse points. In addition, this option works best when running on Windows 8.1 Update 1 or later, since that is the first version of Windows that contains the Windows Overlay Filesystem filter driver ("WOF"). If the WOF driver is detected, wimlib will create the WIMBoot "pointer files" using documented ioctls provided by WOF. Otherwise, if the WOF driver is not detected, wimlib will create the reparse points and edit the file "\System Volume Informa- tion\WimOverlay.dat" on the target volume manually. This is po- tentially subject to problems, since although the code works in certain tested cases, neither of these data formats is actually documented by Microsoft. Before overwriting this file, wimlib will save the previous version in "\System Volume Informa- tion\WimOverlay.wimlib_backup", which you potentially could re- store if you needed to. You actually can still do a --wimboot extraction even if the WIM image is not marked as "WIMBoot-compatible". This option causes the extracted files to be set as "externally backed" by the WIM file. Microsoft's driver which implements this "external back- ing" functionality seemingly does not care whether the image(s) in the WIM are really marked as WIMBoot-compatible. Therefore, the "WIMBoot-compatible" tag (<WIMBOOT> in the XML data) seems to be a marker for intent only. In addition, the Microsoft driver can externally back files from WIM files that use XPRESS chunks of size 8192, 16384, and 32768, or LZX chunks of size 32768, in addition to the default XPRESS chunks of size 4096 that are cre- ated when wimcapture is run with the --wimboot option. --compact=FORMAT Windows-only: compress the extracted files using System Compres- sion, when possible. This only works on either Windows 10 or later, or on an older Windows to which Microsoft's wofadk.sys driver has been added. Several different compression formats may be used with System Compression, and one must be specified as FORMAT. The choices are: xpress4k, xpress8k, xpress16k, and lzx. Exclusions are handled in the same way as with the --wimboot op- tion. That is: if it exists, the [PrepopulateList] section of the file \Windows\System32\WimBootCompress.ini in the WIM image will be read, and files matching any of the patterns in this sec- tion will not be compressed. In addition, wimlib has a hardcoded list of files for which it knows, for compatibility with the Win- dows bootloader, to override the requested compression format. --recover-data If a file is corrupted (its stored hash doesn't match its actual hash, or some parts of it can't be decompressed), extract the corrupted file anyway with a warning, rather than aborting with an error. This may be useful to recover data if a WIM archive was corrupted. Note that recovering data is not guaranteed to succeed, as it depends on the type of corruption that occurred. NOTES Data integrity: WIM files include checksums of file data. To detect accidental (non-malicious) data corruption, wimlib calculates the checksum of every file it extracts and issues an error if it does not have the expected value, unless the --recover-data option is given. (This default behavior seems equivalent to the /verify option of Im- ageX.) In addition, a WIM file can include an integrity table (extra checksums) over the raw data of the entire WIM file. For performance reasons wimlib does not check the integrity table by default, but the --check option can be passed to make it do so. ESD files: wimlib can extract files from solid-compressed WIMs, or "ESD" (.esd) files, just like from normal WIM (.wim) files. However, Microsoft sometimes distributes ESD files with encrypted segments; wim- lib cannot extract such files until they are first decrypted. Security: wimlib has been carefully written to validate all input and is believed to be secure against some types of attacks which often plague other file archiving programs, e.g. directory traversal attacks (which, as it happens, Microsoft's WIM software is vulnerable to). Im- portant parts of wimlib, e.g. the decompressors, have also been fuzz tested. However, wimlib is not currently designed to protect against some types of denial-of-service (DOS) attacks, e.g. memory exhaustion or "zip bombs". EXAMPLES Extract the first image from the Windows PE WIM on the Windows instal- lation media to the directory "boot": wimapply /mnt/windows/sources/boot.wim 1 boot On Windows, apply an image of an entire volume, for example from "in- stall.wim" which can be found on the Windows installation media: wimapply install.wim 1 E:\ Same as above, but running on a UNIX-like system where the correspond- ing partition is /dev/sda2: wimapply install.wim 1 /dev/sda2 Note that before running either of the above commands, an NTFS filesys- tem may need to be created on the partition, for example with for- mat.exe on Windows or mkntfs(8) on UNIX-like systems. For example, on UNIX you might run: mkntfs /dev/sda2 && wimapply install.wim 1 /dev/sda2 (Of course don't do that if you don't want to destroy all existing data on the partition!) See SPLIT WIMS and PIPABLE WIMS for examples of applying split and pi- pable WIMs, respectively. SEE ALSO wimlib-imagex(1) wimcapture(1) wimextract(1) wiminfo(1) wimlib 1.14.4 February 2024 WIMAPPLY(1)
NAME | SYNOPSIS | DESCRIPTION | DIRECTORY EXTRACTION (UNIX) | NTFS VOLUME EXTRACTION (UNIX) | DIRECTORY EXTRACTION (WINDOWS) | SPLIT WIMS | PIPABLE WIMS | OPTIONS | NOTES | EXAMPLES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=wimlib-imagex-apply&sektion=1&manpath=FreeBSD+Ports+14.3.quarterly>