WY60(1) General Commands Manual WY60(1) NAME wy60 - curses based emulator for the Wyse 60tm terminal SYNOPSIS wy60 [ -c | --command command ] [ -h | --help ] [ -j | --job-con- trol { on | off } ] [ -l | --login ] [ -o | --option key=value ] [ -t | --term terminal ] [ -v | --version ] [ -- ] shell arguments DESCRIPTION The wy60 utility program invokes a new shell or command and adjusts the $TERM environment variable to have a value of wyse60. All commands exe- cuted within this shell or any of its child processes automatically have their terminal escape sequences translated to be processed by the terminal that wy60 was invoked from. Unless a different command was requested, the user's default shell as de- termined by the value of the $SHELL environment variable is invoked. If the environment variable has not been set, then the default system shell /bin/sh is used instead. This value can be overridden in the configuration file. OPTIONS Parameters are parsed until the first unknown parameter is encountered, or until the special parameter -- is found. All the following parameters are passed on to the inferior shell or to the user specified command. Check the manual page for sh(1) for a detailed list of options. The following parameters are directly understood by wy60 and will not be forwarded to any child process unless they appear after the -- marker or after another set of unknown parameters: -c | --command command Rather than invoking the user's shell, run the specified command, in- stead. -h | --help Display a brief usage message showing the valid command line parame- ters. -j | --job-control { on | off } Enable or disable job control. If the parent process is a shell that supports job control then wy60 can enable this capability for its children by forking an additional process monitoring the children. By default, this option is enabled. -l | --login Invoke the inferior shell as a login shell. This is done by prepending a minus character to the application name. This convention is sup- ported by all shells but probably gets ignored by most other applica- tions. The --login parameter is ignored if the --command parameter has also been given. As a special case, it is possible to make wy60 a user's default login shell. To do so, wy60 must be entered into the shells(5) file and you must call chsh(1) to change the user's default shell. If the emulator detects that it is invoked as a wrapper for a shell, it ignores all command line parameters. It then resets $SHELL to the value specified in the configuration file or to /bin/sh and launches that shell pass- ing all the parameters that were given to wy60. -o | --option key=value All of the configuration variables listed later in this document can also be overriden on the command line. The syntax is identical to the one used in the configuration files. When using this option, it might be neccessary to quote the key/value pair to prevent the shell from expanding escape sequences. -t | --term terminal Override the value of the $TERM environment variable. If this parame- ter is not present, then a default of wyse60 will be used for the value that is passed to the inferior shell. -v | --version Display the version number of the program and the date when it was compiled. -- All parameters following this argument will be literally passed to the inferior shell. EXAMPLES wy60 If invoked without parameters, an interactive shell is invoked. wy60 -c emacs -nw README The -c parameter can be used to directly invoke an interactive appli- cation that should run in an emulated environment. The emulator will terminate when the invoked application has quit. wy60 -c infocmp use infocmp(1M) to verify that the terminfo(5) database has appropri- ate entries for the emulated wyse60 terminal. CONFIGURATION FILES Some of the execution parameters can be controlled through configuration files. Every user can have a private configuration file in $HOME/.wy60rc that overrides any system-wide settings. The system administrator can also set global parameters in /usr/local/etc/wy60.rc or in /etc/wy60.rc. All configuration files are in plain ASCII format. Comments are introduced by the hash mark # character and extend to the end of the line. Blank lines are ignored. All lines are of the form variable = value. Variable names are case insensitive. Leading and trailing white space for both the vari- ables and the values is stripped prior to processing. Non ASCII characters have to be escaped: \ooo Up to three octal digits can be used to specify a character in the range \001 through \177. \xXX Up to two hexadecimal digits can be used to specify a character in the range \x01 through \xFF. \a The BEL character (ASCII 7). \b The BS character (ASCII 8). \e The ESC character (ASCII 27). \f The FF character (ASCII 12). \n The NL character (ASCII 10). \r The CR character (ASCII 13). \t The TAB character (ASCII 9). \v The VT character (ASCII 11). Please note that continuation lines are not supported and that is not pos- sible to input a NUL character (ASCII 0). The configuration file supports the following parameters: IDENTIFIER The terminal identifier string that is reported when an ENQ (ASCII 5) is received, can be overridden by setting the IDENTI- FIER configuration variable. If this option is not set, then the emulator replies with an ACK (ASCII 6). PRINTCOMMAND Programs can print to a local printer by sending escape codes to wy60. If this variable is set to "auto" then wy60 will try to print to either lp(1) or to lpr(1). Otherwise, this variable should contain the name of a script that can accept data on its standard input. RESIZE If you want to use an external script to resize the console, then you can specify the absolute path to this script by setting the RESIZE configuration variable. For example, if you have SVGA- TextMode(8) installed and you want to run wy60 from the Linux text console, then you might try using a script such as this one: #!/bin/sh PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin egrep '.+' /proc/fb >&2 && exit 0 (tty <&3 | egrep '^/dev/tty[0-9]*$' >&2) 3<&1 if test "$?" -eq 0; then SVGATextMode "$1x$2" <&1 >&2 || SVGATextMode "$1x$2x9" <&1 >&2 || SVGATextMode "$1x$2x8" <&1 >&2 fi exit 0 Make sure that SVGATextMode(8) understands these modes: 80x24, 80x25, 80x42, 80x43, 132x24, 132x25, 132x42, 132x43. SHELL If neither a command has been passed on the command line, nor the user's $SHELL environment variable was set, then use this vari- able to determine the default shell. If the variable is not set, then a value of /bin/sh is used instead. TERM If no terminal type has been specified on the command line, the program defaults to wyse60. This default value can by overridden by setting the TERM configuration variable. WRITEPROTECT The default attribute for indicating write-protect mode is RE- VERSE. This value can be overridden by setting the WRITEPROTECT configuration variable to one of these values: NOR- MAL, BLANK, BLINK, REVERSE, UNDERSCORE, DIM. The attributes can be combined with each other by listing multiple in the same line. All the other variables specify character sequences that should be sent whenever the user presses a function key. The following table lists the variable name, the default value, and the terminfo(5) name for the function key. Variable Name Default Key Sequence Terminfo Name A1 ka1 A3 ka3 B2 kb2 C1 kc1 C3 kc2 Backspace \b kbs Backtab \eI kcbt Begin kbeg Cancel kcan Clear kclr Clear All Tabs ktbc Clear Tab kctab Close kclo Command kcmd Copy kcpy Create kcrt Delete \eW kdch1 Delete Line \eR kdl1 Down \n kcud1 End \eT kend End Of Line \eY kel End Of Screen \eT ked Enter \e7 kent Exit kext Exit Insert Mode krmir Find kfnd Help khlp Home \x1E khome Insert \eE kich1 Insert Line \eQ kil1 Left \b kcub1 Lower Left kll Mark kmrk Message kmsg Move kmov Next \eK knxt Open kopn Options kopt Page Down \eK knp Page Up \eJ kpp Previous \eJ kprv Print \eP kprt Redo krdo Reference kref Refresh krfr Replace \er krpl Restart krst Resume kres Right \f kcuf1 Save ksav Scroll Down kind Scroll Up kri Select kslt Set Tab khts Suspend \x1A kspd Undo kund Up \v kcuu1 Shift Begin kBEG Shift Cancel kCAN Shift Command kCMD Shift Copy kCPY Shift Create kCRT Shift Delete \eW kDC Shift Delete Line \eR kDL Shift End \eT kEND Shift End Of Line \eT kEOL Shift Exit kEXT Shift Find kFND Shift Help kHLP Shift Home \e{ kHOM Shift Insert \eQ kIC Shift Left \b kLFT Shift Message kMSG Shift Move kMOV Shift Next \eK kNXT Shift Options kOPT Shift Previous \eJ kPRV Shift Print \eP kPRT Shift Redo kRDO Shift Replace \er kRPL Shift Resume kRES Shift Right \f kRIT Shift Save kSAV Shift Suspend kSPD Shift Undo kUND F0 kf0 F1 \001@\r kf1 F2 \001A\r kf2 F3 \001B\r kf3 F4 \001C\r kf4 F5 \001D\r kf5 F6 \001E\r kf6 F7 \001F\r kf7 F8 \001G\r kf8 F9 \001H\r kf9 F10 \001I\r kf10 F11 \001J\r kf11 F12 \001K\r kf12 F13 \001`\r kf13 F14 \001a\r kf14 F15 \001b\r kf15 F16 \001c\r kf16 F17 \001d\r kf17 F18 \001e\r kf18 F19 \001f\r kf19 F20 \001g\r kf20 F21 \001h\r kf21 F22 \001i\r kf22 F23 \001j\r kf23 F24 \001k\r kf24 F25 \001L\r kf25 F26 \001M\r kf26 F27 \001N\r kf27 F28 \001O\r kf28 F29 \001l\r kf29 F30 \001m\r kf30 F31 \001n\r kf31 F32 \001o\r kf32 F33 kf33 F34 kf34 F35 kf35 F36 kf36 F37 kf37 F38 kf38 F39 kf39 F40 kf40 F41 kf41 F42 kf42 F43 kf43 F44 kf44 F45 kf45 F46 kf46 F47 kf47 F48 kf48 F49 kf49 F50 kf50 F51 kf51 F52 kf52 F53 kf53 F54 kf54 F55 kf55 F56 kf56 F57 kf57 F58 kf58 F59 kf59 F60 kf60 F61 kf61 F62 kf62 F63 kf63 Alt a \ea Alt b \eb Alt c \ec Alt d \ed Alt e \ee Alt f \ef Alt g \eg Alt h \eh Alt i \ei Alt j \ej Alt k \ek Alt l \el Alt m \em Alt n \en Alt o \eo Alt p \ep Alt q \eq Alt r \er Alt s \es Alt t \et Alt u \eu Alt v \ev Alt w \ew Alt x \ex Alt y \ey Alt z \ez Alt A \eA Alt B \eB Alt C \eC Alt D \eD Alt E \eE Alt F \eF Alt G \eG Alt H \eH Alt I \eI Alt J \eJ Alt K \eK Alt L \eL Alt M \eM Alt N \eN Alt O \eO Alt P \eP Alt Q \eQ Alt R \eR Alt S \eS Alt T \eT Alt U \eU Alt V \eV Alt W \eW Alt X \eX Alt Y \eY Alt Z \eZ Alt 0 \e0 Alt 1 \e1 Alt 2 \e2 Alt 3 \e3 Alt 4 \e4 Alt 5 \e5 Alt 6 \e6 Alt 7 \e7 Alt 8 \e8 Alt 9 \e9 Alt Space \e\x20 Alt Exclamation \e! Alt Double Quote \e" Alt Pound \e# Alt Dollar \e$ Alt Percent \e% Alt Ampersand \e& Alt Single Quote \e' Alt Left Paren \e( Alt Right Paren \e) Alt Asterisk \e* Alt Plus \e+ Alt Comma \e, Alt Dash \e- Alt Period \e. Alt Slash \e/ Alt Colon \e: Alt Semicolon \e; Alt Less \e< Alt Equals \e= Alt Greater \e> Alt Question \e? Alt At \e@ Alt Left Bracket \e[ Alt Backslash \e\\ Alt Right Bracket \e] Alt Circumflex \e^ Alt Underscore \e_ Alt Backtick \e` Alt Left Brace \e{ Alt Pipe \e| Alt Right Brace \e} Alt Tilde \e~ Alt Backspace \e\x7F Not all of these keys are necessarily available on all types of terminals. This is particularly true for the keys with the Alt modifier, which assume that the terminal precedes all characters with an ESC character if Alt is pressed. EXIT STATUS 0 Successful program execution. 125 The inferior shell or command terminated abnormally. 126 The emulator has been terminated by an unexpected signal. 127 Some fatal error prevented or aborted the execution of wy60. Other The inferior shell or command returned a non-zero exit status. DIAGNOSTICS The most common cause for the emulator to fail is the $TERM environment variable not being set or the terminal having insufficient capabilities. If this happens, try using a more powerful terminal type and also use in- focmp(1M) to verify that your terminfo(5) database is configured correctly. You might also see an error message saying that the terminal size could not be determined. wy60 requires that the terminal settings have been config- ured properly prior to invoking the emulator. This usually happens at the time when you log into the system, but you can also adjust the values by calling stty(1). If the emulator complains that it cannot launch the child process then ver- ify that $SHELL is set and points to a valid shell. FILES $HOME/.wy60rc Per-user configuration settings. /usr/local/etc/wy60.rc System-wide configuration settings. /etc/wy60.rc System-wide configuration settings (this file must be created manually and does not get overwritten when upgrading wy60). /usr/share/terminfo/?/* Files containing terminal descriptions. ENVIRONMENT The $TERM environment variable must be set for the emulator to work. If the $SHELL environment variable is set, its value will be used for launching the inferior shell. Otherwise a default filename is taken from the configu- ration files or /bin/sh is used. The emulator sets the $TERM, $COLUMNS, and $LINES environment variables for its child processes. SEE ALSO chsh(1), infocmp(1M), lp(1), lpr(1), sh(1), shells(5), stty(1), SVGA- TextMode(8), terminfo(5), tput(1), xterm(1). SECURITY The program can be executed with normal user privileges. As such, the amount of damage that a malicious application could cause is limited to the user's account. To the best of the author's knowledge the current version of wy60 does not have any security issues, but common sense should still be used whenever running any untrusted software within the emulator. AUTHOR Copyright (C) 2001, 2002 by Markus Gutschke <markus+wy60@wy60.gutschke.com>. This program is free software; you can redistribute it and/or modify it un- der the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FIT- NESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA MAILING LIST There is a low-traffic mailing list for the discussion of this program at http://gutschke.com/cgi-bin/mailman/listinfo/Wy60. TRADEMARKS Wyse and Wyse 60 are trademarks or registered trademarks of Wyse Technol- ogy, Inc. BUGS The emulator attempts to seamlessly switch to wyse60 emulation. This re- quires the ability to query the host terminal for its cursor position at the time when the emulator is started. As terminfo(5) does not provide this capability, wy60 can only support seamless switching on a small number of well known terminal types. If it does not recognize the terminal type, then the screen will be cleared at startup. The escape sequences for setting the screen size can only be processed if the host terminal supports dynamic resizing under program control. Cur- rently, xterm(1) appears to be the only program that has this capability. Function keys work only if the host terminal generates distinct character sequences for each of them and if the terminfo(5) entry for the host termi- nal is correct. Frequently one or the other is not the case which limits the usability of the emulator. Testing has shown, that the most correct im- plementation appears to be available in very recent versions of xterm(1). The current version of the emulator supports only a small subset of the full features offered by a real Wyse 60tm terminal. Several of the advanced features are missing. Most notably this means that there is no support for reprogrammable function keys (but you can use the configuration file to as- sign strings to individual keys) or for the status bar. Frequently, the supported set of escape sequences is sufficient to run an application within the emulated environment, but if that does not work, you should con- sider either filing a detailed bug report with the author or you should switch to using a hardware terminal. Feb 02, 2007 WY60(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | CONFIGURATION FILES | EXIT STATUS | DIAGNOSTICS | FILES | ENVIRONMENT | SEE ALSO | SECURITY | AUTHOR | MAILING LIST | TRADEMARKS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=wy60&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>