FreeBSD Manual Pages
xarchive(1) General Commands Manual xarchive(1) NAME XArchive - a gtk2.0 front-end for various command line archivers. SYNOPSIS xarchive [-a archive | -c archive] [files...] DESCRIPTION XArchive is graphical front-end that uses external wrappers to communicate with the command line archiving tools. XArchive handles creation, extrac- tion and manipulation of archives depending on whether or not the command line tools (and the wrappers written for them) support those actions. The types of archives supported depends on what wrappers are available in XArchive's wrapper directories (see WRAPPERS below), and what command line tools are installed. Currently there are bash shell wrappers for: tar using tar, bzip2, gzip, and compress rar using rar, or unrar(unrar only cannot modify rar's) zip using unzip, zipinfo(from unzip), and zip ace using unace (extraction only) 7zip using 7zz from 7-Zip arj using arj rpm using rpm and cpio (extract only, use appropriate packing tools to modify) deb using dpkg-deb from dpkg (extract only, use appropriate tools to modify) OPTIONS -a archive Add passed files to archive. * Normally the passed archive file is opened, and a multi-file se- lector is presented with any passed files already added to the se- lection list. * However, if the archive filename passed is ask, or the passed archive file cannot be found, then a dialog will be presented ask- ing whether to create a new archive or use an existing one. An ap- propriate chooser will then be presented for finding, or creating, an archive to add to. Once an archive is found, or created, a multi-file selector will be presented with any passed files al- ready added to the selection list. -c archive Create a new archive file named archive with passed files. * A dialog will be presented asking for an archive name. If the archive name passed is ask then a generic sample filename will be shown. Otherwise the passed archive name with be shown. On accept- ing the name is checked to make sure the file doesn't already ex- ist, and that a wrapper for that type of archive is present. Thus the archive name should contain the extension of the archive type that is desired (eg. test.zip). Once a valid archive name is ac- cepted a multi-file selector is presented with any passed files already added to the selection list. USAGE When XArchive starts it consults each wrapper it finds in it's wrapper di- rectories (see WRAPPERS below) to see what file types it can support. If XArchive is started without being passed any files to open, or any op- tions, an information page is shown detailing what wrappers were found and what file types are (based on file extensions) supported by those wrappers If some files to open are passed to XArchive without any options it will treat them as archives and attempt to use the wrappers associated with those archives (based on file extensions) to get, and show, the contents of each. The -a and -c options allow you to use XArchive with your file-manager to add to an existing archive, or to create a new one. Using xarchive -a ask as your file-manager's "open with" command on some selected files will allow you add those selected files to an existing archive (xarchive will ask which archive to add them too). Using just xarchive -a as your file-manager's "open with" command on a se- lected archive file will allow you open that archive and use XArchive's multi-file selector to choose the files to add to it. Using xarchive -c ask as your file-manager's "open with" command on some selected files allows you to create a new archive containing those files (XArchive will ask you for the new archive's name). This option won't allow opening an existing archive and guarantees that a unique one is created. Once and archive is opened it's entries can be selected to delete, extract, or open-with. You can use the following selection methods: Left-Click To select one file, and unselect all others. If that one file is a directory it's contents will also be selected. CTRL + Left-Click To select/unselect multiple files. Hold down the Control Key while Left-Clicking individual files to toggle their selection state. If the file clicked is a directory it's contents will also be selected or unselected. SHIFT + Left-Click To select a block of files. Select the first file in the block nor- mally (just a Left-Click), then Shift + Left Click the last file in the block and all the files in between will also be selected. Right-Click on an archive listing will bring up a context menu with the ac- tions from the toolbar on it. Double-Left-Click on an entry will temporarily extract that file from the archive and use the default handler to view it. If no default handler has been set the "open with.." dialog is opened so that you can set one. Just select an item in the archive and start typing to use the type-ahead search feature (or you can press Ctrl-f). ABOUT 'DRAG AND DROP' Once an archive is opened you can drag files from your filemanager (if it supports drag and drop) on to the archive list and have the add-to-archive file chooser open. It's list of files to add will contain the items dropped. From there you can select more files to add from the file chooser, or drop files onto this list from your filemanager. ABOUT 'OPEN WITH' Open with will temporarily extract selected files and view them with the user selected application. From this dialog you can also set an application as the default double-click handler by clicking that option's checkbox. Setting this allows you to double left click entries in the listing and have them viewed with the set application. Note: When picking an open with application you should make sure that ap- plication doesn't fork to the background. If it does then the temporary file that was extracted will most likely be deleted before the application can view it. For example, gvim will fork to the background, so instead you should use gvim --nofork. ABOUT CREATING ARCHIVES When you select New you will be asked for an archive name. The extension you use on your name will determine what kind of archive is created. For example using mywebstuff.zip will create a zip, and mywebsutff.tar.bz2 will create a bzip2 compressed tar. Then, in the same dialog, you'll select the folder you want to save the archive in. When that's done, and you press open the multiple file selector will be opened. The multiple file selector allows you to browse around the file system and pick off what files and directories you wish to add to your archive. Just select the files in the file chooser list and press the add to list button. To remove files from the add to archive list, select the files and press the remove from list button. Note that the the full path for the file or directory will be listed in the add to archive list for your reference, but when the archive is made only the basename of the entry will be added. For example, if the /home/me/html directory is on the list to be added then the archive will contain the di- rectory html (and it's contents), not it's full path (the /home/me part is discarded). This is a good thing. When you send someone your archive, and they extract it, you probably don't want it trying to create a /home/me/html directory tree on your buddies machine. KEYBOARD SHORTCUTS MAIN ARCHIVE LISTING CTRL + Q quit CTRL + O open an existing archive CTRL + N create a new archive CTRL + W close the current archive window CTRL + S select all files in archive CTRL + U unselect all files in archive CTRL + E extract selected files from archive CTRL + P temporarily extract selected files and view them with a user speci- fied application. (has command history, saved in ~/.xarchive/cmd_history) CTRL + R remove selected files from archive CTRL + A add files to archive CTRL + H read the help file CTRL + I show wrapper information FILE AND DIRECTORY CHOOSER ALT + UP move up to parent directory ALT + DOWN move down a directory ALT + HOME move to home directory CTRL + L ask for a specific location to move to ALT + A if on a directory in the File Chooser, add a shortcut for it to the Folder Shortcuts List ALT + R if on a shortcut in the Folder Shortcuts List, remove it from the list ALT + O OK ALT + C Cancel (Note: To select hidden directories right click on the file listing and se- lect "show hidden files" from the popup menu) 'ADD TO ARCHIVE' SELECTOR The same as the File and Directory Chooser with the following added: ALT + T add selected files in the File Chooser to the Add To Archive List below it ALT + F remove selected files from the Add to Archive List (can also be ac- tivated by a right-click on the list) WRAPPERS XArchive checks the following directories, in the following order, for it's wrappers: * ~/.xarchive/wrappers/ * /usr/local/lib/xarchive/wrappers/ * (or, depending on installation /usr/lib/xarchive/wrappers/) The first wrappers found are the first ones used. Thus, if you copy a wrap- per from the system wide directory (/usr/local/lib/xarchive/wrappers/) to your own private wrapper directory (~/.xarchive/wrappers/) and modify it, your modified version will be used. The wrappers are stand alone executables whose job is to: * When asked what files it supports, check to see if the command line tools it needs are installed and tell XArchive what types of files it supports based on what's installed. * When asked for the contents of an archive, take the output from the com- mand line tools it uses and mangle it into the format XArchive likes * When sent an action to perform, take the requested action from XArchive and send the command line tool the appropriate options to perform said action. Wrappers can be any type of executable file (python scripts, c programs, bash scripts, etc...) that handle the following options in the following manner: -i Info: Check to see if command line programs are installed and return a line containing a semicolon separated list of supported file ex- tensions based on what's installed. eg: * tar;tar.gz;tar.bz2;tar.z;tgz;tbz;tbz2 -o archive Open: Use command line tools to get contents of "archive" and return contents in the format XArchive accepts. Each entry in the archive on a separate line like so: * file1;size;attributes;user;group;date;time;linkinfo * file2;size;attributes;user;group;date;time;linkinfo * file3;size;attributes;user;group;date;time;linkinfo * (note: all fields must be present, so if there's no data for a field fill it with a "-", or a space if you like.) -a archive files Add: Add to "archive" the "files" sent. File names sent are escaped to be bash friendly by XArchive. -n archive file New: create a new archive "archive" with single file "file". (other files selected to be put in new archive will be "added" after cre- ation.) -r archive files Remove: remove from "archive" sent "files" -e archive files Extract: extract from "archive" sent "files" into the current dir. XArchive changes into a user selected directory before sending this command. WRAPPER EXIT CODES * 0 success * 65 unsupported action for this archive type * Anything else for wrapper failure See the wrappers included in /usr/local/lib/xarchive/wrappers (or /usr/lib/xarchive/wrappers) for examples. BUGS Use bug tracker on the sourceforge project page: http://sourceforge.net/projects/xarchive/ AUTHOR Written by Lee Bigelow <ligelowbee@yahoo.com> RESOURCES SourceForge: http://sourceforge.net/projects/xarchive/ Main web site: http://xarchive.sourceforge.net COPYING Copyright (C) 2005 Lee Bigelow <ligelowbee@yahoo.com>. Free use of this software is granted under the terms of the GNU General Public License (GPL). xarchive(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | USAGE | KEYBOARD SHORTCUTS | WRAPPERS | BUGS | AUTHOR | RESOURCES | COPYING
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=xarchive&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>