XScreenSaver(1) General Commands Manual XScreenSaver(1) NAME xscreensaver-command - control a running xscreensaver process SYNOPSIS xscreensaver-command [--display host:display.screen] [--help | --quiet | --verbose | --activate | --deactivate | --cycle | --next | --prev | --se- lect n | --lock | --suspend | --exit | --restart | --time | --watch | --version] DESCRIPTION The xscreensaver-command program controls a running xscreensaver(1) daemon. OPTIONS xscreensaver-command accepts the following command-line options: --help Prints a brief summary of command-line options. --quiet Only print output if an error occurs. --verbose Opposite of --quiet. Default. --activate Tell xscreensaver to turn on immediately (that is, blank the screen, as if the user had been idle for long enough.) The screen- saver will deactivate as soon as there is any user activity, as usual. --deactivate This tells xscreensaver to pretend that there has just been user activity. This means that if the screensaver is active (the screen is blanked), then this command will cause the screen to un-blank as if there had been keyboard or mouse activity. If the screen is locked, then the password dialog will pop up first, as usual. If the screen is not blanked, then this simulated user activity will re-start the countdown (so, issuing the --deactivate command peri- odically is one way to prevent the screen from blanking.) --cycle If the screensaver is active (the screen is blanked), then stop the current graphics demo and run a new one (chosen randomly.) --next This is like either --activate or --cycle, depending on which is more appropriate, except that the graphics hack that will be run is the next one in the list, instead of a randomly-chosen one. In other words, repeatedly executing --next will cause the xscreen- saver process to invoke each graphics demo sequentially. (Though using the --settings option is probably an easier way to accomplish that.) --prev This is like --next, but cycles in the other direction. --select number Like --activate, but runs the Nth element in the list of hacks. By knowing what is in the programs list, and in what order, you can use this to activate the screensaver with a particular graphics demo. (The first element in the list is numbered 1, not 0.) --lock Tells the running xscreensaver process to lock the screen immedi- ately. This is like --activate, but forces locking as well, even if locking is not the default (that is, even if xscreensaver's lock resource is false, and even if the lockTimeout resource is non- zero.) Note that locking doesn't work unless the xscreensaver process is running as you. See xscreensaver(1) for details. --suspend Like --activate, but ignores lockTimeout and immediately powers off the screen without fading out. This is intended to be run just af- ter your laptop's lid is closed, and just before the CPU halts, to lock things down quickly. --exit Causes the xscreensaver process to exit gracefully. This does nothing if the display is currently locked. Warning: never use kill -9 with xscreensaver. That can leave things in an inconsis- tent state, and you may need to log out to repair the damage. --restart Causes the screensaver process to exit and then restart with the same command line arguments as last time. You shouldn't really need to do this, since xscreensaver notices when the .xscreensaver file has changed and re-reads it as needed. --time Prints the time at which the screensaver last activated or deacti- vated (roughly, how long the user has been idle or non-idle: but not quite, since it only tells you when the screen became blanked or un-blanked.) --watch Prints a line each time the screensaver changes state: when the screen blanks, locks, unblanks, or when the running hack is changed. This option never returns; it is intended for use by shell scripts that want to react to the screensaver in some way. An example of its output would be: BLANK Fri Nov 5 01:57:22 1999 RUN 34 RUN 79 RUN 16 LOCK Fri Nov 5 01:57:22 1999 RUN 76 RUN 12 UNBLANK Fri Nov 5 02:05:59 1999 The above shows the screensaver activating, running three different hacks, then locking (perhaps because the lock-timeout went off) then unblanking (because the user became active, and typed the cor- rect password.) The hack numbers are their index in the `programs' list (starting with 1, not 0, as for the --select command.) For example, suppose you want to run a program that turns down the volume on your machine when the screen blanks, and turns it back up when the screen un-blanks. You could do that by running a Perl program like the following in the background. The following pro- gram tracks the output of the --watch command and reacts accord- ingly: #!/usr/bin/perl my $blanked = 0; open (my $in, "xscreensaver-command -watch |") || die; while (<$in>) { if (m/^(BLANK|LOCK)/) { if (!$blanked) { system ("sound-off"); $blanked = 1; } } elsif (m/^UNBLANK/) { system ("sound-on"); $blanked = 0; } } Note that LOCK might come either with or without a preceding BLANK (depending on whether the lock-timeout is non-zero), so the above program keeps track of both of them. --version Prints the version of xscreensaver that is currently running on the display: that is, the actual version number of the running xscreen- saver background process, rather than the version number of xscreensaver-command. (To see the version number of xscreensaver- command itself, use the --help option.) STOPPING GRAPHICS If xscreensaver is running, but you want it to stop running screen hacks (e.g., if you are logged in remotely, and you want the console to remain locked but just be black, with no graphics processes running) you can ac- complish that by simply powering down the monitor remotely. In a minute or so, xscreensaver will notice that the monitor is off, and will stop running screen hacks. You can power off the monitor like so: xset dpms force off See the xset(1) manual for more info. You can also use xscreensaver-settings(1) to make the monitor power down after a few hours, meaning that xscreensaver will run graphics until it has been idle for the length of time you specified; and after that, the monitor will power off, and screen hacks will stop being run. DIAGNOSTICS If an error occurs while communicating with the xscreensaver daemon, or if the daemon reports an error, a diagnostic message will be printed to stderr, and xscreensaver-command will exit with a non-zero value. If the command is accepted, an indication of this will be printed to stdout, and the exit value will be zero. ENVIRONMENT DISPLAY to get the host and display number of the screen whose saver is to be manipulated. PATH to find the executable to restart (for the --restart command). Note that this variable is consulted in the environment of the xscreensaver process, not the xscreensaver-command process. UPGRADES The latest version of xscreensaver(1) and related tools can always be found at https://www.jwz.org/xscreensaver/ SEE ALSO X(1), xscreensaver(1), xscreensaver-settings(1), xset(1) COPYRIGHT Copyright (C) 1992-2026 by Jamie Zawinski. Permission to use, copy, mod- ify, distribute, and sell this software and its documentation for any pur- pose is hereby granted without fee, provided that the above copyright no- tice appear in all copies and that both that copyright notice and this per- mission notice appear in supporting documentation. No representations are made about the suitability of this software for any purpose. It is pro- vided "as is" without express or implied warranty. AUTHOR Jamie Zawinski <jwz@jwz.org>. Please let me know if you find any bugs or make any improvements. X Version 11 6.15 (30-Mar-2026) XScreenSaver(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | STOPPING GRAPHICS | DIAGNOSTICS | ENVIRONMENT | UPGRADES | SEE ALSO | COPYRIGHT | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=xscreensaver-command&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>