YAZ-ZTEST(8) System management commands YAZ-ZTEST(8) NAME yaz-ztest - Z39.50/SRU Test Server SYNOPSIS application [-install] [-installa] [-remove] [-a file] [-v level] [-l file] [-u uid] [-c config] [-f vconfig] [-C fname] [-t minutes] [-k kilobytes] [-K] [-d daemon] [-w dir] [-p pidfile] [-r kilo- bytes] [-ziDSTV1] [listener-spec...] DESCRIPTION yaz-ztest is a Z39.50/SRU test server that uses the YAZ generic front-end server (GFS) API. The server acts as a real Z39.50/SRU server but does not use a database. It returns a random hit count and returns a subset of a few built-in records. The listener-spec consists of a transport mode followed by a colon, fol- lowed by a listener address. The transport mode is either tcp, unix, or ssl. For TCP and SSL, an address has the form: hostname | IP-number [ : portnumber ] For UNIX local socket, the address is the filename of the local socket. OPTIONS -a file Specify a file for dumping PDUs (for diagnostic purposes). The special name - (dash) sends output to stderr. -S Don't fork or make threads on connection requests. This is good for de- bugging, but not recommended for real operation: Although the server is asynchronous and non-blocking, it can be nice to keep a software mal- function (okay then, a crash) from affecting all current users. -1 Like -S but after one session the server exits. This mode is for debug- ging only. -T Operate the server in threaded mode. The server creates a thread for each connection rather than fork a process. Only available on UNIX sys- tems that offer POSIX threads. -s Use the SR protocol (obsolete). -z Use the Z39.50 protocol (default). This option and -s complement each other. You can use both multiple times on the same command line, be- tween listener-specifications (see below). This way, you can set up the server to listen for connections in both protocols concurrently, on different local ports. -l file The logfile. -c config A user option that serves as a specifier for some sort of configura- tion, usually a filename. The argument to this option is transferred to member configname of the statserv_options_block. -f vconfig This specifies an XML file that describes one or more YAZ frontend vir- tual servers. -C fname Sets SSL certificate file name for server (PEM). -v level The log level. Use a comma-separated list of members of the set {fa- tal,debug,warn,log,malloc,all,none}. -u uid Set user ID. Sets the real UID of the server process to that of the given user. It's useful if you aren't comfortable with having the server run as root, but you need to start it as such to bind a privi- leged port. -w dir The server changes to this directory before listening to incoming con- nections. This option is useful when the server is operating from the inetd daemon (see -i). -p pidfile Specifies that the server should write its Process ID to the file given by pidfile. A typical location would be /var/run/yaz-ztest.pid. -i Use this to make the the server run from the inetd server (UNIX only). -D Use this to make the server put itself in the background and run as a daemon. If neither -i nor -D is given, the server starts in the fore- ground. -install Use this to install the server as an NT service (Windows NT/2000/XP only). Control the server by going to the Services in the Control Panel. -installa Use this to install the server as an NT service and mark it as "auto-start. Control the server by going to the Services in the Control Panel. -remove Use this to remove the server from the NT services (Windows NT/2000/XP only). -t minutes Idle session timeout, in minutes. -k size Maximum record size/message size, in kilobytes. -K Forces no-keepalive for HTTP sessions. By default GFS will keep ses- sions alive for HTTP 1.1 sessions (as defined by the standard). Using this option will force GFS to close the connection for each operation. -r size Maximum size of log file before rotation occurs, in kilobytes. Default size is 1048576 k (=1 GB). -d daemon Set name of daemon to be used in hosts access file. See hosts_access(5) and tcpd(8). -m time-format Sets the format of time-stamps in the log-file. Specify a string in the input format to strftime(). -V Display YAZ version and exit. TESTING yaz-ztest normally returns a random hit count between 0 and 24. However, if a query term includes leading digits, then the integer value of that term is used as hit count. This allows testers to return any number of hits. yaz-ztest includes 24 MARC records for testing. Hit counts exceeding 24 will make yaz-ztest return the same record batch over and over. So record at position 1, 25, 49, etc. are equivalent. For XML, if no element set is given or element has value "marcxml", MARCXML is returned (each of the 24 dummy records converted from ISO2709 to XML). For element set OP, then OPAC XML is returned. yaz-ztest may also return predefined XML records (for testing). This is en- abled if YAZ_ZTEST_XML_FETCH environment variable is defined. A record is fetched from a file (one record per file). The path for the filename is FE.d.xml where F is the YAZ_ZTEST_XML_FETCH value (possibly empty), E is element-set, d is record position (starting from 1). The following databases are honored by yaz-ztest: Default, slow and db.* (all databases with prefix "db"). Any other database will make yaz-ztest return diagnostic 109: "Database unavailable". Options for search may be included in the form or URL get arguments in- cluded as part of the Z39.50 database name. The following database options are present: search-delay, present-delay, fetch-delay and seed. The former, delay type options, specify a fake delay (sleep) that yaz-ztest will perform when searching, presenting, fetching records respectively. The value of the delay may either be a fixed floating point value which speci- fies the delay in seconds. Alternatively the value may be given as two floating point numbers separated by colon, which will make yaz-ztest per- form a random sleep between the first and second number. The database parameter seed takes an integer as value. This will call srand with this integer to ensure that the random behavior can be re-played. Suppose we want searches to take between 0.1 and 0.5 seconds and a fetch to take 0.2 second. To access test database Default we'd use: De- fault?search-delay=0.1:0.5&fetch-delay=0.2. GFS CONFIGURATION AND VIRTUAL HOSTS The Virtual hosts mechanism allows a YAZ front-end server to support multi- ple back-ends. A back-end is selected on the basis of the TCP/IP binding (port+listening address) and/or the virtual host. A back-end can be configured to execute in a particular working directory. Or the YAZ front-end may perform CQL to RPN conversion, thus allowing tra- ditional Z39.50 back-ends to be offered as a SRW/SRU service. SRW/SRU Ex- plain information for a particular back-end may also be specified. For the HTTP protocol, the virtual host is specified in the Host header. For the Z39.50 protocol, the virtual host is specified as in the Initialize Request in the OtherInfo, OID 1.2.840.10003.10.1000.81.1. Note Not all Z39.50 clients allow the VHOST information to be set. For those, the selection of the back-end must rely on the TCP/IP informa- tion alone (port and address). The YAZ front-end server uses XML to describe the back-end configurations. Command-line option -f specifies filename of the XML configuration. The configuration uses the root element yazgfs. This element includes a list of listen elements, followed by one or more server elements. The listen describes listener (transport end point), such as TCP/IP, Unix file socket or SSL server. Content for a listener: CDATA (required) The CDATA for the listen element holds the listener string, such as tcp:@:210, tcp:server1:2100, etc. attribute id (optional) Identifier for this listener. This may be referred to from server sec- tions. Note We expect more information to be added for the listen section in a fu- ture version, such as CERT file for SSL servers. The server describes a server and the parameters for this server type. Con- tent for a server: attribute id (optional) Identifier for this server. Currently not used for anything, but it might be for logging purposes. attribute listenref (optional) Specifies one or more listeners for this server. Each server ID is sep- arated by a comma. If this attribute is not given, the server is acces- sible from all listeners. In order for the server to be used for real, however, the virtual host must match if specified in the configuration. element config (optional) Specifies the server configuration. This is equivalent to the config specified using command line option -c. element directory (optional) Specifies a working directory for this backend server. If specified, the YAZ frontend changes current working directory to this directory whenever a backend of this type is started (backend handler bend_start), stopped (backend handler hand_stop) and initialized (bend_init). element host (optional) Specifies the virtual host for this server. If this is specified a client must specify this host string in order to use this backend. element cql2rpn (optional) Specifies a filename that includes CQL to RPN conversion for this back- end server. See ???. If given, the backend server will only "see" a Type-1/RPN query. element ccl2rpn (optional) Specifies a filename that includes CCL to RPN conversion for this back- end server. See ???. If given, the backend server will only "see" a Type-1/RPN query. element stylesheet (optional) Specifies the stylesheet reference to be part of SRU HTTP responses when the client does not specify one. If none is given, then if the client does not specify one, then no stylesheet reference is part of the SRU HTTP response. element client_query_charset (optional) If specified, a conversion from the character set given to UTF-8 is performed by the generic frontend server. It is only executed for Z39.50 search requests (SRU/Solr are assumed to be UTF-8 encoded al- ready). element docpath (optional) Specifies a path for local file access using HTTP. All URLs with a leading prefix (/ excluded) that matches the value of docpath are used for file access. For example, if the server is to offer access in di- rectory xsl, the docpath would be xsl and all URLs of the form http://host/xsl will result in a local file access. element explain (optional) Specifies SRW/SRU ZeeRex content for this server. Copied verbatim to the client. As things are now, some of the Explain content seem redun- dant because host information, etc. is also stored elsewhere. element maximumrecordsize (optional) Specifies maximum record size/message size, in bytes. This value also serves as the maximum size of incoming packages (for Record Updates etc). It's the same value as that given by the -k option. element retrievalinfo (optional) Enables the retrieval facility to support conversions and specifica- tions of record formats/types. See ??? for more information. The XML below configures a server that accepts connections from two ports, TCP/IP port 9900 and a local UNIX file socket. We name the TCP/IP server public and the other server internal. <yazgfs> <listen id="public">tcp:@:9900</listen> <listen id="internal">unix:/var/tmp/socket</listen> <server id="server1"> <host>server1.mydomain</host> <directory>/var/www/s1</directory> <config>config.cfg</config> </server> <server id="server2" listenref="public,internal"> <host>server2.mydomain</host> <directory>/var/www/s2</directory> <config>config.cfg</config> <cql2rpn>../etc/pqf.properties</cql2rpn> <explain xmlns="http://explain.z3950.org/dtd/2.0/"> <serverInfo> <host>server2.mydomain</host> <port>9900</port> <database>a</database> </serverInfo> </explain> </server> <server id="server3" listenref="internal"> <directory>/var/www/s3</directory> <config>config.cfg</config> </server> </yazgfs> There are three configured backend servers. The first two servers, "server1" and "server2", can be reached by both listener addresses. "server1" is reached by all (two) since no listenref attribute is speci- fied. "server2" is reached by the two listeners specified. In order to distinguish between the two, a virtual host has been specified for each server in the host elements. For "server2" elements for CQL to RPN conversion is supported and explain information has been added (a short one here to keep the example small). The third server, "server3" can only be reached via listener "internal". FILES yaz-<version>/ztest/yaz-ztest.c yaz-<version>/include/yaz/backend.h SEE ALSO yaz(7) yaz-log(7) AUTHORS Index Data YAZ 5.35.0 04/10/2025 YAZ-ZTEST(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | TESTING | GFS CONFIGURATION AND VIRTUAL HOSTS | FILES | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=yaz-ztest&sektion=8&manpath=FreeBSD+Ports+15.1.quarterly>