FreeBSD Manual Pages
Yodl builtin functions(7) Your Own Document Language Yodl builtin functions(7) NAME yodlbuiltins - Builtins for the Yodl converters SYNOPSIS This manual page lists the standard builtins of the Yodl package. DESCRIPTION The following list shows the builtins defined by the Yodl converters define and which can be used in Yodl documents. Refer to the Yodl user guide, dis- tributed with the Yodl package, for a full description. The following list shows all builtins of the package in alphabetical order. NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclusion be- havior has changed. The current working directory no longer remains fixed at the directory in which Yodl is called, but is volatile, changing to the directory in which a yodl-file is located. This has the advantage that Yodl's file inclusion behavior now matches the way C's #include directive operates; it has the disadvantage that it may break some current documents. Conversion, however is simple but can be avoided altogether if Yodl's -L (--legacy-include) option is used. The builtins INCLUDEFILE, NOEXPANDIN- CLUDE and NOEXPANDPATHINCLUDE are affected by this new behavior. Yodl's builtin commands As mentioned previously, YODL's input consists of text and of com- mands. YODL supports a number of built-in commands which may either be used in a YODL document, or which can be used to create a macro package. Don't despair if you find that the description of this section is too technical. Exactly for this reason, YODL supports the macro packages to make the life of a documentation writer easier. E.g., see chapter [MACROPACKAGE] that describes a macro package for YODL. Most built-in functions and macros expand the information they re- ceive the way they receive the information. I.e., the information itself is only evaluated by the time it is eventually inserted into an output medium (usually a file). However, some builtin functions evaluate their argument(s) once the argument is processed. They are: o The ERROR built-in function (see section [ERROR]); o The EVAL built-in function (see section [EVAL]); o The FPUTS built-in function (see section [FPUTS]); o The INTERNALINDEX built-in function (see section [INTERNALINDEX]); o The PUSHSUBST built-in function (see section [PUSHSUBST]); o The TYPEOUT built-in function (see section [TYPEOUT]); o The UPPERCASE built-in function (see section [UPPERCASE]); o The WARNING built-in function (see section [WARNING]); o The XXSUBST internal use only built-in function; All other built-in functions will not evaluate their arguments. See the mentioned functions for details, and in particular EVAL() for a description of this evaluation process. ADDTOCOUNTER The ADDTOCOUNTER function adds a given value to a counter. It ex- pects two parameter lists: the counter name, and the value to add. The counter must be previously created with DEFINECOUNTER. The value to add can be negative; in that case, a value is of course subtracted from the counter. See further section [COUNTERS]. ADDTOSYMBOL Since Yodl version 2.00 symbols can be manipulated. To add text to an existing symbol the builtin ADDTOSYMBOL is available. It expects two parameter lists: the symbol's name, and the text to add to the symbol. The symbol must have been created earlier using DE- FINECOUNTER (see section [DEFINECOUNTER]). The macro's second argu- ment is not evaluated while ADDTOSYMBOL is processed. Therefore, it is easy to add the text of another symbol or the expansion of a macro to a symbol value. E.g., ADDTOSYMBOL(one)(SYMBOLVALUE(two)XXnl()) This adds the text of symbol two, followed by a new line, to the contents of symbol one only when symbol one is evaluated, not when ADDTOSYMBOL is evaluated. Example: ADDTOSYMBOL(LOCATION)(this is appended to LOCATION) ATEXIT ATEXIT takes one parameter list as argument. The text of the parame- ter list is appended to the output file. Note that this text is sub- ject to character table translations etc.. An example using this function is the following. A document in the LaTeX typesetting language requires \end{document} to occur at the end of the document. To automatically append this string to the out- put file, the following specification can be used: ATEXIT(NOEXPAND(\end{document})) Several ATEXIT lists can be defined. They are appended to the output file in the reverse order of specification; i.e., the first ATEXIT list is appended to the output file last. That means that in general the ATEXIT text should be specified when a `matching' starting com- mand is sent to the output file; as in: COMMENT(Start the LaTeX document.) NOEXPAND(\begin{document}) COMMENT(Ensure its proper ending.) ATEXIT(NOEXPAND(\end{document})) CHAR The command CHAR takes one argument, a number or a character, and outputs its corresponding ASCII character to the final output file. This command is built for `emergency situations', where you need to typeset a character despite the fact that it may be redefined in the current character table (for a discussion of character tables, see [CHARTABLES]). Also, the CHAR function can be used to circumvent Yodl's way of matching parentheses in a parameter list. The following arguments may be specified with CHAR (attempted in this order): o A decimal number indicating the number of the character in the ascii-table (for example CHAR(41)); o A plain, single character (for example CHAR(#)). So, when you're sure that you want to send a printable character that is not a closing parenthesis to the output file, you can use the form CHAR(c), c being the character (as in, CHAR(;)). To send a non-printable character or a closing parenthesis to the output file, look up the ASCII number of the character, and supply that number as argument to the CHAR command. Example: The following two statements send an A to the output file. CHAR(65) CHAR(A) The following statement sends a closing parenthesis: CHAR(41) Another way to send a string to the output file without expansion by character tables or by macro interpretation, is by using the func- tion NOTRANS (see section [NOTRANS]). If you want to send a string to the output without macro interpretation, but with character table translation, use NOEXPAND (see section [NOEXPAND]). CHDIR The command CHDIR takes one argument, a directory to change to. This command is implemented to simplify the working with includefile (see includefile in yodlmacros(7)). As a demonstration, consider the following fragment: includefile(subdir/onefile) includefile(subdir/anotherfile) includefile(subdir/yetanotherfile) This fragment can be changed to: CHDIR(subdir) includefile(onefile) includefile(anotherfile) includefile(yetanotherfile) CHDIR(..) The current directory, as given to CHDIR, only affects how include- file searches for its files. Note that this example assumes that the current working directory is a member of Yodl's include-path specification (cf., Yodl's --include option). COMMENTThe COMMENT function takes one parameter list. The text in the list is treated as comment. I.e., it is ignored. The text is not copied to the final output file. COUNTERVALUE COUNTERVALUE expands to the value of a counter. Its single parameter list must contain the name of a counter. The counter must have been created earlier using the builtin DEFINECOUNTER. Example: The counter has value COUNTERVALUE(MYCOUNTER). See also section [COUNTERS]. DECWSLEVEL DECWSLEVEL requires one (empty) parameter list. It reduces the cur- rent white-space level. The white-space level typically is used in files that only define Yodl macros. When no output should be gener- ated while processing these files, the white-space level can be used to check for this. If the white-space level exceeds zero, a warning is generated if the file produces non-whitespace output. The builtin function DECWSLEVEL is used to reduce the whitespace level following a previous call of INCWSLEVEL. Once the white space level exceeds zero, no output will be gener- ated. White space, therefore effectively is ignored. The white space level cannot be reduced to negative values. A warning is issued if that would have happened if it were allowed. Example: INCWSLEVEL() DEFINESYMBOL(....) DEFINEMACRO(...)(...)(...) DECWSLEVEL() Without the INCWSLEVEL and DECWSLEVEL, calls, the above definition would generate four empty lines to the output stream. The INCWSLEVEL and DECWSLEVEL calls may be nested. The best approach is to put an INCWSLEVEL at the first line of a macro-defining Yodl-file, and a matching DECWSLEVEL call at the very last line. DEFINECHARTABLE DEFINECHARTABLE is used to define a character translation table. The function expects two parameterlists, containing the name of the character table and character table translations on separate lines. These character table translations are of the form character = quoted-string Here, character is always a value within single quotes. It may be a single character, an octal character value or a hexadecimal charac- ter value. The single character may be prefixed by a \-character (e.g., '\\'). The octal character value must start with a backslash, followed by three octal digits (e.g., '\045'. The hexadecimal char- acter value starts with 0x, followed by two hexadecimal characters. E.g., '0xbe'. The double quoted string may contain anything (but the string must be on one line), possibly containing escape-sequences as well: in the double quoted string the standard C escape sequences \a (alert), \b (beep), \f (formfeed), \n (newline), \r (carriage re- turn), \t (tab), and \v (vertical tab) are recognized and automati- cally converted to their special meanings. Starting with Yodl 2.14.0 octal and hexadecimal constants may also be used. E.g., character Y may also be specified using the octal value \131 or the hexadecimal value \x59. Any other character following a defines itself: \\ rep- resents a single backslash character. Example: DEFINECHARTABLE(demotable)( '&' = "&" '\\' = "\\backslash" '\045' = "oct(45)" '0xa4' = "hex(a4)" ) The builtin function DEFINECHARTABLE does not activate the table. The table is merely defined. To activate the character translation table, use USECHARTABLE. The discussion of character tables is post- poned to section [CHARTABLES]. DEFINECOUNTER DEFINECOUNTER creates a new counter, to be subsequently used by, e.g, the USECOUNTER function. DEFINECOUNTER expects two parameter list: the name of the counter to create and an optional initial value. By default the counter is initialized to zero. Examples: DEFINECOUNTER(YEAR)(1950) DEFINECOUNTER(NTIMES)() See also section [COUNTERS]. DEFINEMACRO DEFINEMACRO is used to define new macros. This function requires three parameter lists: o An identifier, being the name of the macro to define. This identi- fier may only consist of uppercase or lowercase characters. Note that it can not contain numbers, nor underscore characters. o A number, stating the number of arguments that the macro will re- quire once it's used. The number must be in the range 0 to 61. o The text that the macro expands to, once used. This text may contain the strings ARGx, x being 1, 2, etc.. At these places the arguments to the macro are pasted in. The numbers that identify the arguments are 1 to 9, then A to Z and finally a to z. This gives a range of 61 expandable arguments, which is enough for all real-life applica- tions. For example, the following fragment defines a macro bookref, which can be used to typeset a reference to a book. It requires three arguments; say, an author, a title and the name of a pub- lisher: DEFINEMACRO(bookref)(3)( Author(s): ARG1 Book title: ARG2 Published by: ARG3 ) Such a macro could be used as follows: bookref(Sobotta/Becher) (Atlas der Anatomie des Menschen) (Urban und Schwarzenberg, Berlin, 1972) When called, it would produce the following output: Author(s): Sobotta/Becher Book title: Atlas der Anatomie des Menschen Published by: Urban und Schwarzenberg, Berlin, 1972 While applying a macro, the three parameter lists are pasted to the places where ARG1, ARG2 etc. occur in the definition. Note the following when defining new macros: o The parameter list containing the name of the new macro, (bookref) in the above example, must occur right after DEFINEMACRO. No spaces are allowed in between. Space characters and newlines may however occur following this first parameter list. This behavior of the yodl program is similar to the usage of the de- fined macro: the author information must, enclosed in parentheses, follow right after the bookref identifier. I implemented this fea- ture to improve the distinguishing between macros and real text. E.g., a macro me might be defined, but the text I like me (but so do you) still is simple text; the macro me only is activated when a paren- thesis immediately follows it. o Be careful when placing newlines or spaces in the definition of a new macro. E.g., the definition, as given: DEFINEMACRO(bookref)(3)( Author(s): ARG1 Book title: ARG2 Published by: ARG3 ) introduces extra newlines at the beginning and ending of the macro, which are copied to the output each time the macro is used. The ex- tra newline occurs, of course, right before the sequence Author(s): and following the evaluation of ARG3. A simple backslash character at the end of the DEFINEMACRO line would prevent the insertion of extra newline characters: DEFINEMACRO(bookref)(3)(\ Author(s): ARG1 Book title: ARG2 Published by: ARG3 ) o Note that when a macro is used which requires no arguments at all, one empty parameter list still must be specified. E.g., my macro package (see chapter [MACROPACKAGE]) defines a macro it that starts a bullet item in a list. The macro takes no arguments, but still must be typed as it(). This behavior is consistent: it helps distinguish which identifiers are macros and which are simple text. o Macro arguments may evaluate to text. When a \ is appended to the macro-argument, or in the default input handling within a non-zero white-space level (see section [INCWSLEVEL]) this may invalidate a subsequent macro call. E.g., the macro DEFINEMACRO(oops)(1)( ARG1 XXnl() ) when called as oops(hello world), produces the output: hello worldXXnl() To prevent this gluing to arguments to subsequent macros, a single + should be prepended to the macro call: DEFINEMACRO(oops)(1)( ARG1 +XXnl() ) See also section [PLUSIDENT] obout the `+identifier'-sequence. o Note the preferred layout of macro definitions and macro calls. Ad- here to this form, to prevent drowning in too many parentheses. In particular: o Put all elements of the macro definition on one line, except for the macro-expansion itself. Each expansion element should be on a line by itself. o When calling macros put the macro parameter lists underneath each other. If the macrolists themselves contain macro-calls, put each call again on a line of its own, indenting one tab-position beyond the location of the opening parenthesis of the argument. o No continnuation backslashes are required between parameter lists. So, do not use them there to prevent unnecessary clutter. o With complex calls, indent just the arguments, and put the parenthe- ses in their required of logical locations. Example of a complex call: complex( first( ARG1 )( ARG2 +XXnl() ) ARG3 +nop() ARG4 +XXnl() ) o Macro expansion proceeds as follows: o The parameter lists are read from the input o The contents of the parameters then replace their ARGx references in the macro's definition (in some exceptional cases, clearly indicated as such when applicable, the arguments themselves are evaluated first, and then these evaluated arguments are used as replacements for their corresponding ARGx references). o The now modified macro is read by Yodl's lexical scanner. This may result in yet another macro expansion, which will then be evaluated recursively. o Eventually, all expansion is completed (well, should complete, since Yodl doesn't test for eternal recursion) and scanning of the input continues beyond the original macro call. For example, assume we have the following two macros: DEFINEMACRO(First)(1)( Hello ARG1 +XXnl() ) DEFINEMACRO(Second)(1)( First(ARG1) First(ARG1) ) and the following call is issued: Second(Yodl) then the following happens: o Second(Yodl) is read as encountered. o ARG1 in Second is replaced by YODL, and the resulting macro body is sent to the lexical scanner for evaluation: It will see: First(Yodl)First(Yodl) o The first call to First() is now evaluated. This puts (after replac- ing ARG1 by YODL) the following on the scanner's input: Hello Yodl+XXnl()First(Yodl) o Hello Yodl contains no macro call, so it is written to the output stream. Remains: +XXnl()First(Yodl) o Assume XXnl() merely contains a newline (represented by \n, here), so +XXnl() is now replaced by \n. This results in the following in- put for the lexical scanner: \nFirst(Yodl) o The \n is now written to the output stream, and the scanner sees: First(Yodl) o The second call to First() is now evaluated. This puts the following on the scanner's input: Hello Yodl+XXnl() o Hello Yodl is written to the output stream. Remains: +XXnl() o +XXnl() is now replaced by \n. The lexical scanner sees: \n o The newline is printed and we're done. DEFINESYMBOL NOTE: this function has changed at the release of Yodl 2.00. It now expects two parameter lists, rather than one DEFINESYMBOL expects two arguments. An identifier, which is the name of the symbol to define, and the textual value of the symbol. If the second argument is empty, the symbol is defined, but has an empty value. The earlier interpretation of a Yodl symbol as a logical flag can still be used, but allowing it to obtain textual values greatly sim- plifies various Yodl macros. Example: DEFINESYMBOL(Yodl)(Your own document language) DEFINESYMBOL(Options)() DELETECHARTABLE DELETECHARTABLE removes a definition of a character table that was defined by DEFINECHARTABLE. This function expects one argument: the name of the character table remove. It's an error to attempt to delete a character table that is cur- rently in use or to attempt to delete a non-existing character ta- ble. Example: DELETECHARTABLE(mytable) DELETECOUNTER DELETECOUNTER removes a definition of a counter that was defined by DEFINECOUNTER. This function expects one argument: the name of the counter to remove. If the counter does not exist, a warning is issued. It is not con- sidered an error to try to delete a counter that has not been de- fined earlier. Example: DELETECOUNTER(mycounter) DELETEMACRO DELETEMACRO removes a definition of a macro that was defined by DE- FINEMACRO. This function takes one argument: the macro name to re- move. There is no error condition (except for syntax errors): when no macro with a matching name was previously defined, no action is taken. For example, the safe way to define a macro is by first undefining it. This ensures that possible previous definitions are removed first: Example: DELETEMACRO(mymacro) DELETENOUSERMACRO DELETENOUSERMACRO removes a `nousermacro' definition. The function expects one argument: the name of the `nousermacro' identifier to be removed from the nousermacro-set. There is no error condition (except for syntax errors): when the identifier wasn't stored as a `nousermacro' no action is taken. Example: DELETENOUSERMACRO(mymacro) DELETESYMBOL DELETESYMBOL removes the definition of a symbol variable. It expects one parameter list, holding the name of the variable to deleted. This macro has no error condition (except for syntax errors): the symbol in question may be previously defined, but that is not neces- sary. Example: DELETESYMBOL(Options) ERROR The ERROR function takes one argument: text to display to the stan- dard error stream. The current input file and line number are also displayed. After displaying the text, the yodl program aborts with an exit status of 1. The text passed to the function is expanded first. See the example. The ERROR function is an example of a function that evaluates its parameter list itself. This command can be used, e.g., in a macro package when an incorrect macro is expanded. In my macro package (see chapter [MACROPACKAGE]) the ERROR function is used when the sectioning command chapter() is used in an article document (in the package, chapter's are only available in books or reports). An analogous builtin function is WARNING, which also prints a mes- sage but does not exit (see section [WARNING]). Example: In the following call, COUNTERVALUE(NTRIES) is replaced by its actual value: ERROR(Stopping after COUNTERVALUE(NTRIES) attempts) EVAL The EVAL function takes one argument: the text to be evaluated. This function allows you to perform an indirect evaluation of Yodl com- mands. Assume that there is a symbol varnam containing the name of a counter variable, then the following displays the counter's value, after having incremented it: EVAL(NOTRANS(USECOUNTER)(SYMBOLVALUE(varnam))) The actions of the EVAL function can be described as follows: o First, the NOTRANS(USECOUNTER) is evaluated, producing USECOUNTER. o Next, the open parentheses is processed, producing the open paren- thesis itself o Then, SYMBOLVALUE(varnam) is evaluated, producing the name of a counter, e.g. `counter'. o Eventually the closing parentheis is processed, producing the clos- ing parenthesis itself. o All this results in the text USECOUNTER(counter) o This text is now presented to Yodl's lexical scanner, resulting in incrementing the counter, and displaying its incremented value. It should be realized that macro arguments themselves are usually not evaluated. So, a construction like USECOUNTER(EVAL(SYMBOLVALUE(varnam))) fails, since EVAL(SYMBOLVALUE(varnam)) is not a legal name for a counter: the EVAL() call is used here as an argument, which is not expanded. The distinction is subtle, and is caused by the fact that builtin functions receive unprocessed arguments, and may impose cer- tain requirements on them (like USECOUNTER requiring the name of a counter). Summarizing: EVAL acts as follows: o Its argument is presented to Yodl's lexical scanner o The output produced by the processing of the argument is then in- serted into the input stream in lieu of the original EVAL call. Most built-in functions do not evaluate their arguments. In fact, only ERROR, EVAL, FPUTS, INTERNALINDEX, PUSHSUBST, TYPEOUT, UPPER- CASE, WARNING and the iinternally used XXSUBST functions evaluate their arguments. Postponing evaluations allows you to write: DEFINESYMBOL(later)(SYMBOLVALUE(earlier)) Eventually, and not when later is defined, a statement like SYMBOLVALUE(later) produces the value of earlier at the moment SYMBOLVALUE(later) is processed. This is, in all its complex consequences, what would be expected in most cases. It allows us to write general macros produc- ing output that is only evaluated when the text of symbols and val- ues of arguments become eventually, rather than when the macro is defined, available. Decisions like these invariably result in questions like `what if I have to keep original values in some situation?' In those situations EVAL() must be used. The following example shows the definition of three symbols: one receives an initial value, two returns one's ac- tual value when two's value is displayed, three, using EVAL(), stores one's initial value. The example also shows yet another way to suppress macro calls. It uses the macro nop() which is defined in the all standard conversion types. DEFINESYMBOL(one)(This is one, before) DEFINESYMBOL(two)(SYMBOLVALUE(one)) EVAL(DEFINESYMBOL+nop()(three)(SYMBOLVALUE(one))) SETSYMBOL(one)(this is one, after) SYMBOLVALUE(two) SYMBOLVALUE(three) FILENAME The function FILENAME() produces an absolute path to the currently processed Yodl file. This is not necessarily the canonical path name, as it may contain current- and parent-path directories. FPUTS The function FPUTS expects two arguments: the first argument is in- formation to be appended to a file, whose name is given as the sec- ond argument. The first argument is processed by Yodl before it is appended to the requested filename, so it may contain macro calls. For example, the following statement appends a countervalue to the mentioned file: FPUTS(There have been COUNTERVALUE(attempts) attempts)(/tmp/logfile) The second argument (name of the file) is not evaluated, but is used as received. IFBUILTIN The IFBUILTIN function tests whether its first argument is the name of a builtin function. If so, the second parameter list is evalu- ated, else, the third parameter list is evaluated. All three parame- ter lists (the variable, the true-list and the false-list) must be present; though the true-list and/or the false-list may be empty pa- rameter lists. Example: IFBUILTIN(IFBUILTIN)(\ `BUILTIN' is a builtin - function )(\ `BUILTIN' is NOT a builtin - function ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFCHARTABLE The IFCHARTABLE function tests whether its first argument is the name of a character table. The character table needs not be active. If the name is the name of a character table, the second parameter list is evaluated, else, the third parameter list is evaluated. All three parameter lists (the name, the true list and the false list) must be present; though the true list and/or the false list may be empty parameter lists. Example: IFCHARTABLE(standard)(\ `standard' is a character tablebuiltin - function )(\ `standard' is NOT a character tablebuiltin - function ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFDEF The IFDEF function tests for the definition status of the argument in its first parameter list. If it is a defined entity, the second parameter list is evaluated, else, the third parameter list is eval- uated. All three parameter lists (the entity, the true list and the false list) must be present; though the true list and/or the false list may be empty parameter lists. The true list is evaluated if the first argument is the name of: o a built-in function, or o a character table, or o a counter, or o a no-user-macro symbol, or o a symbol, or o a user-defined macro, or Example: IFDEF(someName)(\ `someName' is a defined entity )(\ `someName is not defined. ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFEMPTYIFEMPTY expects three arguments: a symbol, a true-list and a false-list. IFEMPTY evaluates to the true-list if the symbol is an empty string; otherwise, it evaluates to the false-list. The function does not further evaluate its argument. Its use is pri- marily to test whether a macro has received an argument or not. If the intent is to check whether a symbol's value is empty or not, IF- STREQUAL [IFSTREQUAL] should be used, where the first argument is the name of a symbol, and the second argument is empty. Example: IFEMPTY(something)(\ `something' is empty... )(\ `something' is not an empty string ) In the same way, IFEMPTY can be used to test whether an argument ex- pands to a non-empty string. A more elaborate example follows below. Say you want to define a bookref macro to typeset information about an author, a book title and about the publisher. The publisher in- formation may be absent, the macro then typesets unknown: \ DEFINEMACRO(bookref)(3)(\ Author(s): ARG1 Title: ARG2 Published by: \ IFEMPTY(ARG3) (\ Unknown\ )(\ ARG3\ ) ) Using the macro, as in: \ bookref(Helmut Leonhardt) (Histologie, Zytologie und Microanatomie des Menschen) () would now result in the text Unknown behind the Published by: line. Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFEQUALIFEQUAL expects four argument lists. It tests whether its first ar- gument is equal to its second argument. If so, the third parameter list is evaluated, else, the fourth parameter list is evaluated. All four argument lists must be present, though all can be empty lists. The first two arguments of IFEQUAL should be integral numerical ar- guments. In order to determine whether the first two arguments are equal, their values are determined: o If the argument starts with an integral numerical value, that value is the value of the argument. o If the argument is the name of a counter, the counter's value is the value of the argument o If the values of the first two arguments van be determined accord- ingly, their equality determines whether the true list (when the values are equal) or the false list (when the values are unequal) will be evaluated. o Otherwise, IFEQUAL evaluates the false list. Example: IFEQUAL(0)()(\ 0 and an empty string are equal )(\ 0 and an empty string are not equal ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFGREATER IFGREATER expects four argument lists. It tests whether its first argument is greater to its second argument. If so, the third parame- ter list is evaluated, else, the fourth parameter list is evaluated. All four argument lists must be present, though all can be empty lists. The first two arguments of IFGREATER should be integral numerical arguments. In order to determine whether the first two arguments are equal, their values are determined: o If the argument starts with an integral numerical value, that value is the value of the argument. o If the argument is the name of a counter, the counter's value is the value of the argument o If the values of the first two arguments van be determined accord- ingly, their order relation determines whether the true list (when the first value is greater than the second value) or the false list (when the first value is smaller or equal than the second value) is evaluated. o Otherwise, IFGREATER evaluates the false list. Example: IFGREATER(counter)(5)(\ counter exceeds the value 5 )(\ counter does not exceeds the value 5, or counter is no Yodl-counter. ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFMACROThe IFMACRO function tests whether its first argument is the name of a macro. If the name is the name of a macro, the second parameter list is evaluated, else, the third parameter list is evaluated. All three parameter lists (the name, the true list and the false list) must be present; though the true list and/or the false list may be empty parameter lists. Example: IFMACRO(nested)(\ `nested' is the name of a macro )(\ There is no macro named `nested' ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFSMALLER IFSMALLER expects four argument lists. It tests whether its first argument is smaller to its second argument. If so, the third parame- ter list is evaluated, else, the fourth parameter list is evaluated. All four argument lists must be present, though all can be empty lists. The first two arguments of IFSMALLER should be integral numerical arguments. In order to determine whether the first two arguments are equal, their values are determined: o If the argument starts with an integral numerical value, that value is the value of the argument. o If the argument is the name of a counter, the counter's value is the value of the argument o If the values of the first two arguments van be determined accord- ingly, their order relation determines whether the true list (when the first value is smaller than the second value) or the false list (when the first value is greater than or equal to the second value) is evaluated. o Otherwise, IFSMALLER evaluates the false list. Example: IFSMALLER(counter)(5)(\ counter is smaller than the value 5, or counter is no Yodl-counter )(\ counter exceeds the value 5 ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFSTREQUAL IFSTREQUAL tests for the equality of two strings. It expects four arguments: two strings to match, a true list and a false list. The true list is only evaluated when the contents of the two string ar- guments exactly match. The first two arguments of IFSTREQUAL are partially evaluated: o If the argument is the name of a symbol, the symbol's value is the value of the argument o Otherwise, the argument itself is used. In the degenerate case where the string to be compared is actually the name of a SYMBOL, use a temporary SYMBOL variable containing the name of that symbol, and compare it to whatever you want to compare it with. Alternatively, write a blank space behind the arguments, since the arguments are then interpreted `as is'. In practice, the need for these constructions seem to arise seldomly, however. Example: IFSTREQUAL(MYSYMBOL)(Hello world)( The symbol `MYSYMBOL' holds the value `Hello world' )( The symbol `MYSYMBOL' doesn't hold the value `Hello world' ) IFSTRSUB IFSTRSUB tests whether a string is a sub-string of another string. It acts similar to IFSTREQUAL, but it tests whether the second string is part of the first one. The first two arguments of IFSTREQULA are partially evaluated: o If the argument is the name of a symbol, the symbol's value is the value of the argument o Otherwise, the argument itself is used. In the degenerate case where the string to be compared is actually the name of a SYMBOL, use a temporary SYMBOL variable containing the name of that symbol, and compare it to whatever you want to compare it with. Alternatively, write a blank space behind the arguments, since the arguments are then interpreted `as is'. In practice, the need for these constructions seem to arise seldomly, however. Example: IFSTRSUB(haystack)(needle)( `needle' was found in `haystack' )( `needle' was not found in `haystack' ) Note that both `haystack' and `needle' may be the names of symbols. If they are, their contents are is compared, rather than the literal names `haystack' and `needle' IFSYMBOL The IFSYMBOL function tests whether its first argument is the name of a symbol. If it is the name of a symbol, the second parameter list is evaluated, else, the third parameter list is evaluated. All three parameter lists (the name, the true list and the false list) must be present; though the true list and/or the false list may be empty parameter lists. Example: IFSYMBOL(nested)(\ `nested' is the name of a symbol )(\ There is no symbol named `nested' ) Please note the preferred layout: The first argument immediately follows the function name, then the second argument (the true list) is indented, as is the false list. The layout closely follows the preferred layout of if-else statements of many programming lan- guages. IFZERO IFZERO expects three parameter lists. The first argument defines whether the whole function expands to the true list or to the false list. The first argument of IFZERO should be an integral numerical value. Its value is determined as follows: o If the argument starts with an integral numerical value, that value is the value of the argument. o If the argument is the name of a counter, the counter's value is the value of the argument o Otherwise, IFZERO evaluates the false list. Note that, starting with Yodl version 2.00 the first argument is not evaluated any further. So, COUNTERVALUE(somecounter) is always eval- uated as 0. If the value of a counter is required, simply provide its name as the first argument of the IFZERO function. Example: DEFINEMACRO(environment)(2)(\ IFZERO(ARG2)(\ NOEXPAND(\end{ARG1})\ )(\ NOEXPAND(\begin{ARG1})\ )\ ) Such a macro may be used as follows: environment(center)(1) Now comes centered text. environment(center)(0) which would of course lead to \begin and \end{center}. The numeric second argument is used here as a on/off switch. INCLUDEFILE INCLUDEFILE takes one argument, a filename. The file is processed by Yodl. If a file should be inserted without processing the builtin function NOEXPANDINCLUDE [NOEXPANDINCLUDE] or NOEXPANDPATHINCLUDE [NOEXPANDPATHINCLUDE] should be used. The yodl program supplies, when necessary, an extension to the file- name. The supplied extension is .yo, unless defined otherwise dur- ing the compilation of the program. Furthermore, Yodl tries to locate the file in the Yodl's include path (which may be set using the --include option). The actual value of the include path is shown in the usage information, displayed when Yodl is started without arguments. NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclu- sion behavior has changed. The current working directory no longer remains fixed at the directory in which Yodl is called, but is volatile, changing to the directory in which a yodl-file is located. This has the advantage that Yodl's file inclusion behavior now matches the way C's #include directive operates; it has the disad- vantage that it may break some current documents. Conversion, how- ever is simple and can be avoided altogether if Yodl's -L (--legacy-include) option is used. Example: INCLUDEFILE(latex) Here, Yodl attempts to include the file latex or latex.yo from the current include path. When the file is not found, Yodl aborts. INCWSLEVEL INCWSLEVEL requires one (empty) parameter list. It increases the current white-space level. The white-space level typically is used in files that only define Yodl macros. When no output should be gen- erated while processing these files, the white-space level can be used to check for this. If the white-space level exceeds zero, a warning is generated if the file produces non-whitespace output. The builtin function DECWSLEVEL is used to reduce the whitespace level following a previous call of INCWSLEVEL. Once the white space level exceeds zero, no output will be gener- ated. White space, therefore is effectively ignored. The white space level cannot be reduced to negative values. A warning is issued if that would have happened if it were allowed. Example: INCWSLEVEL() DEFINESYMBOL(....) DEFINEMACRO(...)(...)(...) DECWSLEVEL() Without the INCWSLEVEL and DECWSLEVEL, calls, the above definition would generate four empty lines to the output stream. The INCWSLEVEL and DECWSLEVEL calls may be nested. The best approach is to put an INCWSLEVEL at the first line of a macro-defining Yodl-file, and a matching DECWSLEVEL call at the very last line. INTERNALINDEX INTERNALINDEX expects one argument list. The argument list is evalu- ated and written to the index file. The index file is defined since Yodl version 2.00, and contains the fixup information which was previously written to Yodl's output as the .YODLTAGSTART. ... .YODLTAGEND. sequence. The index file allows for greated processing speed, at the expense of an additional file. The associated yodlpost postprocessing pro- gram reads and processes the index file, and modifies the corre- sponding yodl-output accordingly. The index file is not created when output is written to the standard output name, since Yodl is unable to request the system for the cur- rent file offset. The entries of the index file always fit on one line. INTERNALINDEX changes newline characters in its argument into single blank spaces. Each line starts with the current offset of Yodl's output file, thus indicating the exact location where a fixup is requested. An example of a produced fixup line could be 3004 ref MACROPACKAGE indicating that at offset 3004 in the produced output file a refer- ence to the label MACROPACKAGE is requested. Assuming a html conver- sion, The postprocessor thereupon writes something like <a href="outfile04.html#MACROPACKAGE">4.3.2.</a> into the actual output file while processing Yodl's output up to offset location 3004. Consequently, producing Yodl-output normally consists of two steps: o First, Yodl itself is started, producing, e.g., out.idx (the index file) and out.yodl (Yodl's raw output). o Then, Yodl's post-processor processes out.idx and out.yodl, produc- ing one or more final output files, in which the elements of the in- dex file have been properly handled. This may result in multiple output file, like report.html, report01.html, report02.html etc. NOEXPAND NOEXPAND is used to send text to the final output file without being expanded by Yodl (the other methods are the CHAR macro, see section [CHAR], and the NOTRANS macro, see section [NOTRANS]). NOEXPAND takes one parameter list, the text in question. Whatever occurs in the argument is not subject to parsing or expansion by Yodl, but is simply copied to the output file (except for CHAR and (iinternally used) XXSUBST functions in the argument, which are expanded. If CHAR-expansion is not required either NOTRANS [NOTRANS] can be used). Furthermore, the contents of the parameter list are also subject to character table translations, using the currently active table. This should come as no surprise. Ignoring character tables would make both the processing of CHAR calls and the NOTRANS function superflu- ous. So, the following situations are recognized: ---------------------------------------------- support chartables and CHAR ------------------------------ Macro expansion yes no ---------------------------------------------- Yes (standard) Push chartable (standard) Pop chartable No NOEXPAND NOTRANS ---------------------------------------------- E.g., let's assume that you need to write in your document the fol- lowing text: INCLUDEFILE(something or the other) IFDEF(onething)( ... )( .... ) NOEXPAND(whatever) The way to accomplish this is by prefixing the text by NOEXPAND fol- lowed by an open parenthesis, and by postfixing it by a closing parenthesis. Otherwise, the text would be expanded by Yodl while processing it (and would lead to syntax errors, since the text isn't correct in the sence of the Yodl language). For this function, keep the following caveats in mind: o There is only one thing that a NOEXPAND cannot protect from expan- sion: an ARGx in a macro definition. The argument specifier is al- ways processed. E.g., after DEFINEMACRO(thatsit)(1)( That is --> NOEXPAND(ARG1) <-- it! ) thatsit(after all) the ARG1 inside the NOEXPAND statement is replaced with after all. o The NOEXPAND function must, as all functions, be followed by a para- meter list. The parentheses of the list must therefore be `bal- anced'. For unbalanced lists, use CHAR(40) to set an open parenthe- sis, or CHAR(41) to typeset a closing parenthesis. NOEXPANDINCLUDE NOEXPANDINCLUDE takes one argument, a filename. The file is in- cluded. The filename is uses as specified. The include path is not used when locating this file. NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclu- sion behavior has changed. The current working directory no longer remains fixed at the directory in which Yodl is called, but is volatile, changing to the directory in which a yodl-file is located. This has the advantage that Yodl's file inclusion behavior now matches the way C's #include directive operates; it has the disad- vantage that it may break some current documents. Conversion, how- ever is simple and can be avoided altogether if Yodl's -L (--legacy-include) option is used. The argument to NOEXPANDINCLUDE is partially evaluated: o If the argument is the name of a symbol, the symbol's value is the value of the argument o Otherwise, the argument itself is used. The thus obtained file name is not further evaluated: in particular, it is not affected by available character translations. The contents of the file are included literally, not subject to macro expansion. Character translations are performed, though. If character translations are not appropriate, PUSHCHARTABLE can be used to suppress character table translations temporarily. The purpose of NOEXPANDINCLUDE is to include source code literally in the document, as in: NOEXPANDINCLUDE(literal.c) The function NOEXPANDPATHINCLUDE can be used to insert a file which is located in one of the directories specified in Yodl's include path. NOEXPANDPATHINCLUDE NOEXPANDPATHINCLUDE takes one argument, a filename. The file is in- cluded. The file is searched for in the directories specified in Yodl's includepath. NOTE: Starting with Yodl version 3.00.0 Yodl's default file inclu- sion behavior has changed. The current working directory no longer remains fixed at the directory in which Yodl is called, but is volatile, changing to the directory in which a yodl-file is located. This has the advantage that Yodl's file inclusion behavior now matches the way C's #include directive operates; it has the disad- vantage that it may break some current documents. Conversion, how- ever is simple and can be avoided altogether if Yodl's -L (--legacy-include) option is used. The argument to NOEXPANDPATHINCLUDE is partially evaluated: o If the argument is the name of a symbol, the symbol's value is the value of the argument o Otherwise, the argument itself is used. The thus obtained file name is not further evaluated: in particular, it is not affected by available character translations. Like the NOEXPANDINCLUDE function, the contents of the file are in- cluded literally, not subject to macro expansion. Character transla- tions are performed, though. If character translations are not ap- propriate, PUSHCHARTABLE [PUSHCHARTABLE] can be used to suppress character table translations temporarily. The purpose of NOEXPANDPATHINCLUDE is to include source code as de- fined in a macro package literally into the document, as in: NOEXPANDPATHINCLUDE(rug-menubegin.xml) NOTRANSNOTRANS copies its one argument literally to the output file, with- out expanding macros in it and without translating the characters with the current translation table. The NOTRANS function is typi- cally used to send commands for the output format to the output file. For example, consider the following code fragment: COMMENT(--- Define character translations for \, { and } in LaTeX. ---) DEFINECHARTABLE(standard)( '\\' = "$\\backslash$" '{' = "\\verb+{+" '}' = "\\verb+}+" ) COMMENT(--- Activate the translation table. ---) USECHARTABLE(standard) COMMENT(--- Now two tests: ---) NOEXPAND(\input{epsf.tex}) NOTRANS(\input{epsf.tex}) NOEXPAND sends $\backslash$input\verb+{+epsf.tex\verb+}+ since the characters in its argument are translated with the stan- dard translation table. In contrast, NOTRANS sends \input{epsf.tex}. The parameter list of NOTRANS must be balanced with respect to its parentheses. When using an unbalanced set of parentheses, use CHAR(40) to send a literal (, or CHAR(41) to send a ). While converting Yodl-documents to target document types Yodl fre- quently uses the (not further documented) builtin function XXSUBST. In the unlikely event that the text XXSUBST(...) must be written in a document, the sequence XXSUBST+CHAR(40)...CHAR(41) can be used. The NOEXPAND description summarizes all combinations of character translations and/or macro expansion, and how they are handled and realized by Yodl. NOUSERMACRO NOUSERMACRO controls yodl's warnings in the following way: When Yodl is started with the -w flag on the command line, then warnings are generated when Yodl encounters a possible macro name, followed by a parameter list, without finding a macro by that name. Yodl then prints something like cannot expand possible user macro. Examples of such sequences are, The necessary file(s) are in /usr/local/lib/yodl, or see the manual page for sed(1). The candi- date macros are file and sed; these names could just as well be `valid' user macros followed by their parameter list. When a corresponding NOUSERMACRO statement appears before yodl en- counters the candidate macros, no warning is generated. A fragment might therefore be: NOUSERMACRO(file sed) The necessary file(s) are in ... See the manual page for sed(1). The NOUSERMACRO accepts one or more names in its argument, separated by white space, commas, colons, or semi-colons. OUTBASEOUTBASE inserts the current basename of the output file into the output file. The basename is the name of the file of which the di- rectory components and extension were stripped. If the output file is the standard output file, - is inserted. OUTDIR OUTDIR inserts the current path name of the output file into the output file. The path name is a, not necessarily absolute, designa- tor of the directory in which the output file is located. If the output file is indicated as, e.g., -o out, then OUTDIR simply in- serts a dot. If the output file is the standard output file, a dot is inserted too. OUTFILENAME OUTFILENAME inserts the current filename of the output file into the output file. The filename is the name of the file of which the di- rectory components were stripped. If the output file is the standard output file, - is inserted. PARAGRAPH PARAGRAPH isn't really a builtin function, but as Yodl handles para- graphs in a special way it is probably useful to describe paragraph handling here nonetheless. Starting with Yodl 2.00 PARAGRAPH oper- ates as follows: If the macro is not defined, new paragraphs, defined as series of consecutive empty lines written to the output stream, are not han- dled different from any other series of characters sent to the out- put stream. I.e., they are inserted into that stream. However, if the macro has been defined, Yodl calls it whenever a new paragraph (defined as a series of at least two blank lines) has been recognized. The empty lines that were actually recognized may be obtained inside the PARAGRAPH macro from the XXparagraph symbol, if this symbol has been be defined by that time. If defined, it contains the white space that caused Yodl to call the PARAGRAPH macro. Note that, in order to inspect XXparagraph it must have been defined first. Yodl itself does not define this symbol itself. The PARAGRAPH macro should be defined as a macro not expecting ar- guments. The macro is thus given a chance to process the paragraph in a way that's fitting for the particular conversion type. If the PARAGRAPH macro produces series of empty lines itself, then those empty lines do not cause Yodl to activate PARAGRAPH. So, Yodl itself will not recursively call PARAGRAPH, although the macro could call itself recursively. Of course, such recursive activcation of PARA- GRAPH is then the sole responsibility of the macro's author, and not Yodl's. Some document languages do not need paragraph starts; e.g., LaTeX handles its own paragraphs. Other document languages do need it: typically, PARAGRAPH is then defined in a macro file to trigger some special action. E.g., a HTML converter might define a paragraph as: DEFINEMACRO(PARAGRAPH)(0)( XXnl() NOTRANS(<p>) ) A system like xml has more strict requirements. Paragraphs here must be opened and closed using pairs of <p> and </p> tags. In those cases an auxiliary counter can be used to indicate whether there is an open paragraph or not. The PARAGRAPH macro could check for this as follows, assuming the availability of a counter XXp: DEFINEMACRO(PARAGRAPH)(0)( XXnl() IFZERO(XXp)( )( NOTRANS(</p>) ) NOTRANS(<p>) SETCOUNTER(XXp)(1) ) Note that the above fragment exemplifies an approach, not necessar- ily the implementation of the PARAGRAPH macro for an xml-converter. PIPETHROUGH The builtin function PIPETHROUGH is, besides SYSTEM, the second function with which a Yodl document can affect its environment. PIPETHROUGH can be very useful. It uses an external program to ac- complish special features. The idea is that an external command is started, to which a block of text from within a Yodl document is `piped'. The output of that child program is piped back into the Yodl document; hence, a block of text is `piped through' an external program. Whatever is received again in the Yodl run, is further processed. The PIPETHROUGH function takes two arguments: o the command to run, and o the text to send to that command. Functionally, the occurrence of the PIPETHROUGH function and of its two arguments is replaced by whatever the child program produces on its standard output. An example might be the inclusion of the current date, as in: The current date is: PIPETHROUGH(date)() In this example the command is date and the text to send to that program is empty. The main purpose of this function is to provide a way by which ex- ternal programs can be used to create, e.g., tables or figures for a given output format. Further releases of Yodl may contain such ded- icated programs for the output formats. POPCHARTABLE Character tables which are pushed onto the table stack using PUSHCHARTABLE() are restored (popped) using POPCHARTABLE(). For a description of this mechanism please refer to section [PUSHINGTA- BLES]. POPCOUNTER POPCOUNTER is used to remove the topmost counter from the counter stack. The values of counters may be pushed on a stack using PUSH- COUNTER [PUSHCOUNTER]. To remove the topmost element of a counter's stack POPCOUNTER is available. POPCOUNTER expects one argument: the name of the counter to pop. The previously pushed value then becomes the new value of the counter. A counter's value may be popped after defining it, whereafter the stack is empty, but the counter will still be defined. In that case, using the counter's value is consid- ered an error. Examples: DEFINECOUNTER(YEAR)(1950) POPCOUNTER(YEAR) COMMENT(YEAR now has an undefined value) See also section [COUNTERS]. POPMACRO POPMACRO is used to remove the actual macro definition, restoring a previously pushed definition. The values of macros may be pushed on a stack using PUSHMACRO. To remove the topmost element of a macro's stack POPMACRO is avail- able. POPMACRO expects one argument: the name of the macro to pop. The previously pushed value then becomes the new value of the macro. A macro's value may be popped after defining it, after which its stack is empty. In that case, using the macro (although the macro's name is still defined) is considered an error. Example: DEFINEMACRO(Hello)(1)(Hello, ARG1, this is a macro definition) Hello(Karel) PUSHMACRO(Hello)(1)(Hello, ARG1, this is the new definition) Hello(Karel) POPMACRO(Hello) Hello(Karel) COMMENT(The third activation of Hello() produces the same output as the first activation) POPSUBST POPSUBST is used to revert to a previous level of interpretation of SUBST definitions. Refer to the descriptions of the PUSHSUBST and SUBST builtin commands below for details. There is no limit to the number of times POPSUBST can be called. Once the `PUSHSUBST stack' is empty SUBST definitions are automati- cally interpreted (so no stack-underflow error is ever encoun- tered). POPSYMBOL POPSYMBOL is used to remove the topmost symbol from the symbol stack. The values of symbols may be pushed on a stack using PUSH- SYMBOL [PUSHSYMBOL]. To remove the topmost element of a symbol's stack POPSYMBOL is available. POPSYMBOL expects one argument: the name of the symbol to pop. The previously pushed value then becomes the new value of the symbol. A symbol's value may be popped after defining it, after which its stack is empty. In that case, using the symbol (although the sym- bol's name is still defined) is considered an error. Example: DEFINESYMBOL(YEAR)(This happened in 1950) POPSYMBOL(YEAR) COMMENT(YEAR now has an undefined value) POPWSLEVEL POPWSLEVEL is used to remove the topmost wslevel from the wslevel stack. The values of wslevels may be pushed on a stack using PUSH- WSLEVEL [PUSHWSLEVEL]. See also section DECWSLEVEL [DECWSLEVEL] To remove the topmost element of a wslevel's stack POPWSLEVEL is available. POPWSLEVEL expects one argument: the name of the wslevel to pop. The previously pushed value then becomes the new value of the wslevel. A wslevel's value may be popped after defining it, emp- tying the stack, but the wslevel will still be defined. In that case, using the wslevel's value is considered an error. Example: COMMENT(Assume WS level is zero) PUSHWSLEVEL(1) COMMENT(WS level now equals 1) POPWSLEVEL() COMMENT(WS level now equals 0 again) PUSHCHARTABLE Once a character table has been defined, it can be pushed onto a stack using PUSHCHARTABLE. The pushed chartable may be popped later. PUSHCHARTABLE is described in more detail in section [PUSHINGTA- BLES]. PUSHCOUNTER PUSHCOUNTER is used to start another lifetime for a counter, pushing its current value on a stack. A stack is available for each individ- ual counter. PUSHCOUNTER expects two arguments: the name of the counter to push and its new value after pushing. When the second argument is an empty parameter list, the new value will be zero. The new value may be specified as a numerical value, or as the name of an existing counter. Specify the name of the counter twice to merely push its value, without modifying its current value. Examples: DEFINECOUNTER(YEAR)(1950) PUSHCOUNTER(YEAR)(1962) COMMENT(YEAR now has the value 1962, and a pushed value of 1950) See also section [COUNTERS]. PUSHMACRO PUSHMACRO is used to start another lifetime for a macro, pushing its current definition on a stack. A stack is available for each indi- vidual macro. PUSHMACRO expects three arguments: the name of the macro to push, the number of its arguments after pushing (which may be different from the number of arguments interpreted by the pushed macro) and its new definition. So, PUSHMACRO is used exactly like DEFINEMACRO, but redefines a cur- rent macro (or define a new macro if no macro was defined by the name specified as its first argument. Example: DEFINEMACRO(Hello)(1)(Hello, ARG1, this is a macro definition) Hello(Karel) PUSHMACRO(Hello)(1)(Hello, ARG1, this is the new definition) Hello(Karel) POPMACRO(Hello) Hello(Karel) COMMENT(The third activation of Hello() produces the same output as the first activation) PUSHSUBST PUSHSUBST can be used to (temporarily) suppress the interpretation of SUBST definitions (the SUBST built-in command is covered below, refer to its description for an example). PUSHSUBST expects one argument: an integral number which is either 0 or non-zero (commonly: 1). After calling PUSHSUBST(0) SUBST defini- tions are not interpreted anymore; use POPSUBST() to revert to the previous type of interpretation. Alternatively, PUSHSUBST(0) can be used to stack another level of SUBST interpreations on top of the last-used one. On a 64-bit computer the PUSHSUBST stack can hold slightly more than 60 SUBST interpreation levels. When more levels are pushed, the old- est levels are silently forgotten. Calling POPSUBST once the PUSH- SUBST stack is empty results in activating the SUBST interpretations (and so a stack-underflow error will not be encountered). PUSHSYMBOL PUSHSYMBOL is used to start another lifetime for a symbol, pushing its current value on a stack. A stack is available for each individ- ual symbol. PUSHSYMBOL expects two arguments: the name of the symbol to push and its new value after pushing. When the second argument is an empty parameter list, the new value will be zero. The new value may be specified as a numerical value, or as the name of an existing sym- bol. Specify the name of the symbol twice to merely push its value, without modifying its current value. Examples: DEFINESYMBOL(YEAR)(This happened in 1950) PUSHSYMBOL(YEAR)(This happended in 1962) COMMENT(YEAR now has the value `This happended in 1962' and a pushed value of `This happened in 1950') PUSHWSLEVEL PUSHWSLEVEL is used to start another lifetime of the white-space level pushing the level's current value on a stack. See also section INCWSLEVEL [INCWSLEVEL] PUSHWSLEVEL expects one argument, the new value of the white-space level. This value may be specified as a numerical value or as the name of a counter. The argument may be empty, in which case the new value will be zero. Example: COMMENT(Assume WS level is zero) PUSHWSLEVEL(1) COMMENT(WS level now equals 1) POPWSLEVEL() COMMENT(WS level now equals 0 again) RENAMEMACRO RENAMEMACRO takes two arguments: the name of a built-in macro (such as INCLUDEFILE) and its new name. E.g., after RENAMEMACRO(INCLUDEFILE)(include) a file must be included by include(file). INCLUDEFILE can no longer be used for this: following the RENAMEMACRO action, the old name can no longer be used; it becomes an undefined symbol. If you want to make an alias for a built-in command, do it with DE- FINEMACRO. E.g., after: DEFINEMACRO(include)(1)(INCLUDEFILE(ARG1)) both INCLUDEFILE and include can be used to include a file. SETCOUNTER SETCOUNTER expects two parameter lists: the name of a counter, and a numeric value or the name of another counter. The corresponding counter (which must be previously created with NEWCOUNTER) is set to, respectively, the numeric value or the value of the other counter. See also section [COUNTERS]. SETSYMBOL SETSYMBOL expects two parameter lists: the name of a symbol, and the text to assign to the named symbol. SUBST SUBST is a general-purpose substitution mechanism for strings ap- pearing in the input. SUBST takes two arguments: a search string and a substitution string. E.g., after SUBST(VERSION)(1.00) YODL transforms all occurrences of VERSION in its input into 1.00. SUBST is also useful in situations where multi-character sequences should be converted to accented characters. E.g., a LaTeX converter might define: SUBST('e)(+NOTRANS(\'{e})) Each 'e in the input will subsequently be converted to e. SUBST may be useed in combination with the command line flag -P, as in a invocation yodl2html -P'SUBST(VERSION)(1.00)' myfile.yo Another useful substitution might be: SUBST(_OP_)(CHAR(40)) SUBST(_CP_)(CHAR(41)) which defines an opening parenthesis (_OP_) and a closing parenthe- sis (_CP_) as mapped to the CHAR function. The strings _OP_ and _CP_ might then be used to produce unbalanced parameter lists. Note that: o The first argument of the SUBST command, the search string, is taken literally. Yodl does not expand it; the string must be literally matched in the input. o The second argument, the replacement, is further processed by Yodl. Protect this text by NOTRANS or NOEXPAND where appropriate. Substitutions occur extremely early while YODL processes its input files. In order to process its input files, YODL takes the following steps: 1. It requests input from its lexical scanner (so-called tokens) 2. Its parser processes the tokens produced by the lexical scanner 3. Its parser may send text to an output `object', which eventually ap- pears in the output file generated by YODL. YODL performs all macro substitutions in step 2, and all character table conversions in step 3. However, the lexical scanner has access to the SUBST definitions: as soon as its lexical analyzer detects a series of characters matching the defining sequence of a SUBST definition, it replaces that defining sequence by its definition. That definition is then again read by the lexical scanner. Of course, this definition may, in turn, contain defining sequences of other SUBST definitions: these are then replaced by their definitions as well. This implies: o Circular definitions may cause the lexical scanner to get stuck in a replacement loop. It is the responsibility of the author defining SUBST definitions to make sure that this doesn't happen. o Neither the parser, nor the output object ever sees the SUBST defin- ing character sequences: they only see their definitions. In some cases substitutions must be suppressed. Consider double quoted text strings that are frequently used in programming lan- guages. E.g., "hello world". The text inside the string should not be converted by Yodl, but unless substitutions can be suppressed the string "\"evil code" appears as "evil code" To suppress the interpretation of SUBST definitions PUSHSUBST, in- troduced earlier, can be used. The predefined macro verb suppresses the interpretation of SUBST definitions by starting with PUSH- SUBST(0) and ending with POPSUBST(). SYMBOLVALUE SYMBOLVALUE expands to the value of a symbol. Its single parameter list must contain the name of a symbol. The symbol must have been created earlier using the builtin DEFINESYMBOL. Example: The symbol has value SYMBOLVALUE(MYSYMBOL). SYSTEM SYSTEM takes one argument: a command to execute. The command is run via the standard C function system. SYSTEM can be useful in many ways. E.g., you might want to log when someone processes your document, as in: SYSTEM(echo Document processed! | mail myself@my.host) Note that SYSTEM merely performs an system-related task. It's a process that is separated from the YODL process itself. One of the consequences of this is that any output generated by SYSTEM not nor- mally appears into YODL's output file. If the output of a subprocess should be inserted into YODL's output file, either use PIPETHROUGH [PIPETHROUGH], or insert a temporary file as shown in the following example: SYSTEM(date > datefile) The current date is: INCLUDEFILE(datefile) SYSTEM(rm datefile) TYPEOUTTYPEOUT requires one parameter list. The text of the list is sent to the standard error stream, followed by a newline. This feature can be handy to show, e.g., messages such as version numbers in macro package files. Example: The following macro includes a file and writes to the screen that this file is currently processed. DEFINEMACRO(includefile)(1)( TYPEOUT(About to process document: ARG1) INCLUDEFILE(ARG1) ) UPPERCASE UPPERCASE converts a string or a part of it to upper case. It has two arguments: o The string to convert; o A length, indicating how many characters (starting from the begin- ning of the string) should be converted. The length indicator can be smaller than one or larger than the length of the string; in that case, the whole string is convertered. Example: UPPERCASE(hello world)(1) UPPERCASE(hello world)(5) UPPERCASE(hello world)(0) This code sample expands to: Hello world HELLO world HELLO WORLD USECHARTABLE USECHARTABLE takes one parameter list: the name of a translation ta- ble to activate. The table must previously have been defined using DEFINECHARTABLE. See section [CHARTABLES] for a description of char- acter translation tables. Alternatively, the name may be empty in which case the default char- acter mapping is restored. USECOUNTER USECOUNTER is a combination of ADDTOCOUNTER and COUNTERVALUE. It ex- pects one parameter list: the name of an defined counter (see DE- FINECOUNTER [DEFINECOUNTER]). The counter is first incremented by 1. Then the function expands to the counter's value. See also section [COUNTERS]. VERBOSITY VERBOSITY expects two arguments, and may be used to change the ver- bosity level inside YODL files. The function may be used profitably for debugging purposes, to debug the expansion of a macro or the processing of a YODL input file. The first argument indicates the procesing mode of the second argu- ment, and it may be: o Empty, in which case the message-level is set to the value specified in the second argument; o +, in which case the value specified in the second argument augments the current message level; o -, in which case the value specified in the second argument augments is removed from the current message level The second argument specifies one or more, separated by blanks, mes- sage level names or it may be set to a hexadecimal value (starting with 0x), using hexadecimal values to represent message levels. Also, NONE may be used, to specify no message level, or ALL can be used to specify all message levels. The following message levels are defined: o ALERT (0x40). When an alert-error occurs, Yodl terminates. Here Yodl requests something of the system (like a get_cwd()), but the system fails. o CRITICAL (0x20). When a critical error occurs, Yodl terminates. The message itself can be suppressed, but exiting can't. A critical con- dition is, e.g., the omission of an open parenthesis at a location where a parameter list should appear, or a non-existing file in an INCLUDEFILE specification (as this file should be parsed). A non-ex- isting file with a NOEXPANDINCLUDE specification is a plain (non-critical) error. o DEBUG (0x01). Probably too much info, like getting information about each character that was read by Yodl. o ERROR (0x10). An error (like doubly defined symbols). Error messages will not stop the parsing of the input (up to a maximum number of errors), but no output is generated. o INFO (0x02). Not as detailed as `debug', but still very much info, like information about media switches. o NOTICE (0x04). Information about, e.g., calls to the builtin func- tion calls. o WARNING (0x08). Something you should know about, but probably not affecting Yodl's proper functioning There also exists a level EMERG (0x80) which cannot be suppressed. The value 0x00 represents NONE, the value 0xff represents ALL. When specifying multiple message levels using the hexadecimal form, their hexadecimal values should be binary-or-ed: adding them is ok, as long as you don't specify ALL: VERBOSITY()(0x06) COMMENT(this specifies `INFO' and `NOTICE') When specifying message levels by their names, the names may be truncated at a unique point. However, the message level names are interpreted case sensitively, so INF for INFO is recognized as such, but info for INFO isn't. The following examples all specify ver- bosity levels INFO and NOTICE: VERBOSITY()(I N) VERBOSITY()(N I) VERBOSITY()(NOT IN) VERBOSITY()(INFO NOTICE) WARNINGWARNING takes one argument: text to display as a warning. The yodl program makes sure that before showing the text, the current file and line number are printed. Other than this, WARNING works just as TYPEOUT (see section [TYPEOUT]). Note that an analogous function ERROR exists, which prints a message and then terminates the program (see section [ERROR]). FILES The files in tmp/wip/macros define the converter's macro packages. The scripts yodl2tex, yodl2html, yodl2man etc. perform the conversions. SEE ALSO yodlstriproff(1), yodl(1), yodlconverters(1), yodlletter(7), yodlmacros(7), yodlmanpage(7), yodlpost(1), yodlverbinsert(1). BUGS -- AUTHOR Frank B. Brokken (f.b.brokken@rug.nl), yodl_4.01.00.tar.gz 1996-2017 Yodl builtin functions(7)
NAME | SYNOPSIS | DESCRIPTION | FILES | SEE ALSO | BUGS | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=yodlbuiltins&sektion=7&manpath=FreeBSD+Ports+15.1.quarterly>