FreeBSD Manual Pages
ZNAPZEND(1) znapzend ZNAPZEND(1) NAME znapzend - znapzend daemon SYNOPSIS znapzend [options...] --man show man-page and exit --version print version and exit -h,--help display this help and exit -d,--debug print debug messages to STDERR -n,--noaction run in simulation mode: does no changes to filesystems --nodelay if a backup plan has a zend_delay defined, ignore it --nodestroy does all changes to the filesystem except destroy --forbidDestRollback forbids forcing destination dataset rollback and removal of datasets/snapshots not present on source --logto=x select where to log (syslog::<facility> or <filepath>) when logging to a file, send USR1 to re-open the filehandle --loglevel=x define the log level --pidfile=x write a pid file when running in daemon mode --daemonize fork into the background --runonce=[x] run one round on the optionally provided dataset -r,--recursive recurse from the given "run-once" dataset --inherited allow "run-once" on dataset which only inherits a plan --since=x allow to consider a non-automatic common snapshot "x" as a starting point --sinceForced=x same as --since=x but also make sure "x" exists on destination (can cause removal of newer snapshots) --forcedSnapshotSuffix=x use non-generated snapshot suffix for this "run-once" --features=x comma separated list of features to be enabled (detailed in man page): oracleMode recvu compressed sendRaw lowmemRecurse zfsGetType skipIntermediates sendIntermediates forbidDestRollback -i/-I a "zfs send" compatible on/off for skipIntermediates --rootExec=x exec zfs with this command to obtain root privileges (sudo or pfexec) --connectTimeout=x sets the ConnectTimeout for ssh commands --autoCreation automatically create dataset on destination if it does not exist --noautoCreation avoid automatically creating a dataset on destination if it does not exist (default) --timeWarp=x shift znapzend's sense of NOW into the future by x seconds --skipOnPreSnapCmdFail skip snapshots if the pre-snap-command fails --skipOnPreSendCmdFail skip replication if the pre-send-command fails --cleanOffline clean up source snapshots even if a destination was offline --mailErrorSummaryTo=rcpt if "send task(s) failed", mail a summary to rcpt DESCRIPTION ZnapZend is a snapshot based zfs backup daemon creating snapshots on a scheduled basis on the source filesystem and on destination filesystems. ZnapZend reads its configuration from custom properties in the dataset. Use znapzendzetup to set and list these properties. -d, --debug talk a lot while running. Sends debug messages to stderr. -n, --noaction don't do any actions which have lasting effect. Ideal to try out new configurations together with --debug --nodelay if a backup plan has a zend_delay defined, ignore it (should help when debugging the backup plan configurations, without waiting for hours to run them during experiments) --nodestroy do all changes to the filesystem except destroying old snapshots after a successful run to snapshot and replicate to backup destinations --forbidDestRollback by default znapzend uses zfs recv -F which rolls back destination to the most recent snapshot, and in case of incremental replication streams can also destroy snapshots and other child datasets not present in the source. The --forbidDestRollback option allows to not enforce this mode, so znapzend would instead report errors if destination is not ready to re- ceive data without applying such operations. This can be useful for maintenance of backup destinations, but can be counter-productive for regularly scheduled operations. --logto={syslog::facility|filepath} send logs out to either syslog or a logfile. Default is to send logs to syslog::daemon when running daemonized. When running in debug mode, the logs will go to STDERR by default. When logging to a file, send USR1 to reopen the file handle after log rotation. Examples: --logto=/var/log/znapzend.log --logto=syslog::daemon --loglevel={debug|info|warning|err|alert} Define the log level when logging to file. Default is debug. --pidfile=path write a pid file when running in daemon mode pidfile defaults to /var/run/znapzend.pid if no pidfile is given --daemonize Fork into the background. --runonce=[dataset] run one round on source dataset or on all datasets if empty. This is very useful for testing. Use it in connection with --noaction and --de- bug while testing your new configuration, or with --recursive for quick back up of whatever has backup plans in a single pool or dataset tree. --forcedSnapshotSuffix=snapsuffix for this round of --runonce create the specified snapshot suffix, rather than one generated by a pattern managed by 'znapzend'. Note it would not get automatically cleaned per retention policy, either. This is primarily intended for manual operations where a sysadmin wants for mark the certain data state of local significance while making an un- scheduled backup. This option is not valid if the run-once mode is not requested. While basic sanity checks are done, it is up to the caller to specify a correct string value according to the rules of their ZFS version, and to take care that it is unique (no snapshots with such suffix already exist). See also --since=snapsuffix --since=snapsuffix, --sinceForced=snapsuffix Enables to see a snapshot named snapsuffix in the history of the dataset under source and target pools, which should be a common snap- shot present on both (or only on the source pool), and may be their newest common snapshot (that would otherwise be blocking the sync as something that needs to be removed for a full auto-creation replication and/or a usual replication). If the target dataset does not have this named snapshot, but the other- wise discovered history of automatic snapshots allows to include it into the usual replication, it will be sent (and a newer automati- cally-named snapshot would be made and sent). In other cases, it is up to the systems administrator to make the original systems data consis- tent with that on their remote ZFS pool. One could then use --sinceForced=snapsuffix variant that can remove from destination any snapshots that are newer than snapsuffix to make way if needed, and ensure that this snapshot appears in destination's history; by default with --since=snapsuffix such removals should not happen. Unlike the --forcedSnapshotSuffix=snapsuffix, this option does not de- fine how the new snapshot made during this run would be called (it would be named by common timestamp-based pattern to not get in the way of subsequent regular replications). The dataset name provided in this argument will never be removed during this run-once (even if it matches the configured znapzend time- stamp-based snapshot naming pattern and is old enough to rotate away in other circumstances). Example: znapzend --runonce=rpool/ROOT --since=20200101-01-finallyStableSetup -r, --recursive when backing up a particular dataset with --runonce=[dataset], do not just look at this dataset's backup plan, but iterate into its children that might have any. Useful for quick backups of a pool whose root dataset has no znapzendzetup configurations defined, but some trees un- der it do. See below for interaction with --inherited option and examples. --inherited when backing up a particular dataset with --runonce=[dataset], do not require that the provided dataset directly has a locally defined backup plan configuration (sanity check that it is not "received" via ZFS replication). With this option in place, allow also to quickly snap- shot and/or replicate datasets of subtrees which inherit a backup plan from a dataset which has it in its attributes whose source is "local". --inherited and --recursive together At this time, the --inherited is "sort of exclusive" vs. --recursive mode, and if both are specified the behavior depends on whether the re- quested dataset has some (local or inherited-from-local) backup plan. If a dataset without a backup plan is passed, the script should effec- tively ignore the --inherited option and just recurse until it finds some dataset(s) with proper locally defined backup plan(s) (note that finding inherited plans first is highly unlikely due to ZFS attribute inheritance from parents to children). Examples below assume the following dataset layout: + tank (no znapzend config) | + export (local znapzend config) | | + home (inherited znapzend config from local tank/export) | | + user (inherited znapzend config from local tank/export) | | + sources (inherited znapzend config from local tank/export) | | + documents (inherited znapzend config from local tank/export) | | + pictures (inherited znapzend config from local tank/export) | + var (local znapzend config) + usbbackup (no znapzend config) + snapshots (no znapzend config) + export (received znapzend config) | + home (inherited from received usbbackup/snapshots/export) | + user (inherited from received usbbackup/snapshots/export) | + sources (inherited from received usbbackup/snapshots/ex- port) | + documents (inherited from received usbbackup/snapshots/ex- port) | + documents (inherited from received usbbackup/snap- shots/export) + var (received znapzend config) Examples: znapzend --recursive --runonce=tank This should walk all filesystem or volume datasets defined anywhere un- der tank (root dataset of same-named pool) and snapshot/replicate the found datasets that have a backup plan configured "locally", such as tank/export and tank/var, according to configuration (e.g. with chil- dren and beyond if the corresponding backup plan's recursive=on option is specified). It should not waste time looking for datasets under the usbbackup pool. znapzend --runonce=tank/export/home/user/documents Given that only tank/export "locally" defines a znapzend backup plan, the default znapzend behavior with a descendant dataset would be to find no configuration (sourced as "local" right in it) and so would "run-once" nothing. znapzend --recursive --runonce=tank/export/home Same (no config found) for recursion starting from a dataset with in- herited backup plan configuration (assuming none of its descendants have a "local" config of their own). znapzend --inherited --runonce=tank/export/home/user/documents With the --inherited option however it would recognize this descendant dataset as having a backup plan configuration inherited from tank/ex- port, would then look at tank/export and confirm that it has this con- figuration from a "local" source, and should znapzend runonce just this dataset and its descendants (so including tank/export/home/user/docu- ments/pictures, but not including siblings like tank/ex- port/home/user/sources). znapzend --inherited --recursive --runonce=tank Since tank has no backup plan, znapzend should recurse and find the nearest datasets with configured plans, tank/export and tank/var, and process them according to configuration. znapzend --inherited --recursive --runonce=tank/export Since tank/export has a locally defined backup plan, znapzend should process it according to configuration. znapzend --inherited --recursive --runonce=tank/export/home Since tank/export/home has a backup plan inherited from a locally de- fined one in tank/export, znapzend should process it according to con- figuration. znapzend --recursive --runonce=usbbackup znapzend --inherited --runonce=usbbackup/snapshots znapzend --inherited --recursive --runonce=usbbackup/snapshots/export/home Neither of these runs should do anything, because all datasets involved (including those found by a recursive walk) under usbbackup have nei- ther a local definition of a backup plan, nor one inherited from a lo- cal definition. --features=feature1,feature2,... enables enhanced zfs features not supported by all zfs implementations. Do not enable features unless you are sure your zfs supports (or re- quires) it Available features: oracleMode working around the following zfs issues we have seen on oracle: * The multi snapshot destroy syntax is not available. So stick to destroying them individually. * Sometimes a snapshot can not be destroyed because of some ora- cle zfs bug. Only a reboot seems to be able to fix this. So we just destroy the ones we can destroy. Logging an error about the problem recvu use the -u option on the receive end, to keep the destination zfs filesystems unmounted. resume use the -s option on the receive end, to support resumable transfer with receive_resume_token. If you have aborted a resumable-send, you should either do a re- sume-send using -t <token> to continue it or clear the half-re- ceived snapshot using zfs receive -A <filesystem> Example: zfs get receive_resume_token tank/test zfs send -t <token> | zfs receive -s tank/test compressed use 'compressed' to add options -Lce to the zfs send command Even if a source and destination datasets are both using compres- sion, zfs send will, by default, decompress the data before send- ing, and zfs recv will then compress it again before writing it to disk. Using -c will skip the unnecessary decompress-compress stages. This decreases CPU load on both source and destination as well as reduces network bandwidth usage. The -L option is for large block support and -e is for embedded data support. These may require certain (Open)ZFS features to be enabled. sendRaw use 'sendRaw' to add option -w to zfs send commands For encrypted source datasets this instructs zfs not to decrypt be- fore sending which results in a remote backup that can't be read without the encryption key/passphrase, useful when the remote isn't fully trusted or not physically secure. This option must be used consistently, raw incrementals cannot be based on non-raw snapshots and vice versa. sendIntermediates The opposite of skipIntermediates, detailed in the next section. This is the default mode of operation, and only included here to allow for completeness and explicitness of your configurations. skipIntermediates Enable the 'skipIntermediates' feature to send a single increment between latest common snapshot and the newly made one. It may skip several source snaps if the destination was offline for some time, and it should skip snapshots not managed by znapzend. Normally for online destinations, the new snapshot is sent as soon as it is cre- ated on the source, so there are no automatic increments to skip. By default 'znapzend' uses the 'zfs send -I' option on the sending end (so to include all intermediate snapshots), rather than '-i' (which would send a single big increment), to keep the destination zfs dataset history similar to the source's one. This implies the -sendIntermediates mode of operation. Note: it was the default from beginning of 'znapzend' to make sure that in case a send operation takes too long, we still get all the intermediate snapshots sent to the destination. Beware or benefit that this can deliver not only automatic, but also manually named snapshots to your destination which would have to be cleaned manu- ally when no longer wanted there, but that they can be used as com- mon snapshots to repair broken syncs e.g. with --since=X options. With the 'skipIntermediates' feature disabled, all snapshots be- tween the latest common one and the newly created one on the source would be sent to each destination, and then the "extra" ones of those managed by znapzend may get discarded according to destina- tion's retention policy. Note that snapshots which are NOT managed by znapzend, e.g. ones you created manually, would appear on the destination and stay there until removed manually. Also note that this may consume more disk space and transfer time than otherwise needed for the data increment. This original mode is now primarily recommended for irregular back- ups (on removable media or over unstable links) and cases where the sysadmin marks certain data states via snapshots as special (e.g. "before_upgrade", etc.) The feature is recommended to be part of your 'znapzend' service setup for regular runs in stable storage/networking conditions. forbidDestRollback Avoid use of destructive 'zfs recv -F' in favor of failing to re- ceive; more details in description of --forbidDestRollback CLI op- tion above. lowmemRecurse use 'lowmemRecurse' on systems where you have too many datasets, so a recursive listing of attributes to find backup plans exhausts the memory available to `znapzend(zetup)`: instead, go the slower way to first list all impacted dataset names, and then query their con- figs one by one. zfsGetType use 'zfsGetType' if your 'zfs get' supports a '-t' argument for filtering by dataset type at all (e.g. one in Solaris 10 does not), AND lists properties for snapshots by default when recursing (e.g. the one in Solaris 10u8 already does), so that there is too much data to process while searching for backup plans. If these two conditions apply to your system, the time needed for a '--recursive' search for backup plans can literally differ by hun- dreds of times (depending on the amount of snapshots in that dataset tree... and a decent backup plan will ensure you have a lot of those), so you would benefit from requesting this feature. This feature should not impact the default (non- '--recursive') listings however. --rootExec={sudo|pfexec} Execute zfs with this command, 'sudo' or 'pfexec', to obtain root priv- ileges. This is often necessary when running znapzend as a non-privi- leged user with a zfs install that doesn't support finer permission controls. This also applies to the zfs commands ran on remote servers over ssh. For sudo, the /etc/sudoers file will need to be modified to allow for passwordless access to zfs commands if znapzend is to be ran as a dae- mon or the system will be used as a remote. Many ZFS installations in- clude an /etc/sudoers.d/zfs file as an example. --connectTimeout=timeout sets the ssh connection timeout (in seconds) --autoCreation Automatically create a dataset on a destination host if it's not there yet. --noautoCreation Avoid automatically creating a dataset on a destination host if it's not there yet. This is the default behavior; the option is available to help explicitly override a setting inherited from a configuration file, etc. --timeWarp=x Shift ZnapZend's sense of time into the future by x seconds. The practical application if this function is to determine what will happen at some future point in time. This can be useful for testing but also when running in noaction and debug mode to determine which snap- shots would be created and removed at some future point in time. --skipOnPreSnapCmdFail Prevent snapshots of a dataset from being taken when it has a pre-snap-command defined and the command returns a non-zero exit code or is killed by a signal. --skipOnPreSendCmdFail Prevent snapshots of a dataset from being replicated to a destination when it has a pre-snap-command defined and the command returns a non-zero exit code or is killed by a signal. --cleanOffline Clean snapshots of a source dataset even if one or more destination datasets failed during replication for whatever reason (destination of- fline, destination full, destination pool became read-only due to stor- age issues, source too full to make a snapshot, etc.). The most recent common snapshot for each destination (as tracked on source for resilience) will not be deleted from source, but this is still a potentially dangerous option: if the preserved snapshot somehow gets deleted from the destination, it may require a full re-replication the next time it is online. --mailErrorSummaryTo=rcpt(@domain),... If this argument is passed, a copy of error summary would be sent there by your system's command line mailer program. It is then up to this program and system setup to validate the recipient names (local or do- main-suffixed) and deliver the message to some mailbox. This feature relies on a program which supports standard sendmail-like CLI. EXAMPLE To test a new config: znapzend --debug --noaction --runonce=tank/test To see what is going to happen in one hour: znapzend --debug --noaction --timeWarp=3600 --runonce=tank/test To run as a daemon: znapzend --daemonize --pidfile=/var/run/znapzend.pid --logto=syslog::daemon COPYRIGHT Copyright (c) 2014 by OETIKER+PARTNER AG. All rights reserved. LICENSE This program is free software: you can redistribute it and/or modify it un- der the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FIT- NESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. AUTHOR Tobias Oetiker <tobi@oetiker.ch>, Dominik Hassler <hadfl@cpan.org> HISTORY 2014-06-01 had Multi destination backup 2014-05-30 had Initial Version 0.23.4 2026-07-04 ZNAPZEND(1)
NAME | SYNOPSIS | DESCRIPTION | EXAMPLE | COPYRIGHT | LICENSE | AUTHOR | HISTORY
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=znapzend&sektion=1&manpath=FreeBSD+Ports+15.1.quarterly>