FreeBSD Manual Pages
INDENT(1) General Commands Manual INDENT(1) NAME indent - changes the appearance of a C program by inserting or deleting whitespace. SYNOPSIS indent [options] [input-files] indent [options] [single-input-file] [-o output-file] indent --version DESCRIPTION This man page is generated from the file indent.texinfo. This is Edition of "The indent Manual", for Indent Version , last updated . The indent program can be used to make code easier to read. It can also convert from one style of writing C to another. indent understands a substantial amount about the syntax of C, but it also attempts to cope with incomplete and misformed syntax. In version 1.2 and more recent versions, the GNU style of indenting is the default. OPTIONS -as, --align-with-spaces If using tabs for indentation, use spaces for alignment. See INDENTATION. -bad, --blank-lines-after-declarations Force blank lines after the declarations. See BLANK LINES. -bap, --blank-lines-after-procedures Force blank lines after procedure bodies. See BLANK LINES. -bbb, --blank-lines-before-block-comments Force blank lines before block comments. See BLANK LINES. -bbo, --break-before-boolean-operator Prefer to break long lines before boolean operators. See BREAKING LONG LINES. -bc, --blank-lines-after-commas Force newline after comma in declaration. See DECLARATIONS. -bl, --braces-after-if-line Put braces on line after if, etc. See STATEMENTS. -blf, --braces-after-func-def-line Put braces on line following function definition line. See DECLARATIONS. -blin, --brace-indentn Indent braces n spaces. See STATEMENTS. -bls, --braces-after-struct-decl-line Put braces on the line after struct declaration lines. See DECLARATIONS. -br, --braces-on-if-line Put braces on line with if, etc. See STATEMENTS. -brf, --braces-on-func-def-line Put braces on function definition line. See DECLARATIONS. -brs, --braces-on-struct-decl-line Put braces on struct declaration line. See DECLARATIONS. -bs, --Bill-Shannon, --blank-before-sizeof Put a space between sizeof and its argument. See STATEMENTS. -cn, --comment-indentationn Put comments to the right of code in column n. See COMMENTS. -cbin, --case-brace-indentationn Indent braces after a case label N spaces. See STATEMENTS. -cdn, --declaration-comment-columnn Put comments to the right of the declarations in column n. See COMMENTS. -cdb, --comment-delimiters-on-blank-lines Put comment delimiters on blank lines. See COMMENTS. -cdw, --cuddle-do-while Cuddle while of do {} while; and preceding `}'. See COMMENTS. -ce, --cuddle-else Cuddle else and preceding `}'. See COMMENTS. -cin, --continuation-indentationn Continuation indent of n spaces. See STATEMENTS. -clin, --case-indentationn Case label indent of n spaces. See STATEMENTS. -cpn, --else-endif-columnn Put comments to the right of #else and #endif statements in column n. See COMMENTS. -cs, --space-after-cast Put a space after a cast operator. See STATEMENTS. -dn, --line-comments-indentationn Set indentation of comments not to the right of code to n spaces. See COMMENTS. -bfda, --break-function-decl-args Break the line before all arguments in a declaration. See DECLARATIONS. -bfde, --break-function-decl-args-end Break the line after the last argument in a declaration. See DECLARATIONS. -dj, --left-justify-declarations If -cd 0 is used then comments after declarations are left justified behind the declaration. See DECLARATIONS. -din, --declaration-indentationn Put variables in column n. See DECLARATIONS. -fc1, --format-first-column-comments Format comments in the first column. See COMMENTS. -fca, --format-all-comments Do not disable all formatting of comments. See COMMENTS. -fnc, --fix-nested-comments Fix nested comments. See COMMENTS. -gnu, --gnu-style Use GNU coding style. This is the default. See COMMON STYLES. -gts, --gettext-strings Treat gettext _("...") and N_("...") as strings rather than as func- tions. See BREAKING LONG LINES. -hnl, --honour-newlines Prefer to break long lines at the position of newlines in the input. See BREAKING LONG LINES. -in, --indent-leveln Set indentation level to n spaces. See INDENTATION. -iln, --indent-labeln Set offset for labels to column n. See INDENTATION. -ipn, --parameter-indentationn Indent parameter types in old-style function definitions by n spaces. See INDENTATION. -kr, --k-and-r-style Use Kernighan & Ritchie coding style. See COMMON STYLES. -ln, --line-lengthn Set maximum line length for non-comment lines to n. See BREAKING LONG LINES. -lcn, --comment-line-lengthn Set maximum line length for comment formatting to n. See COMMENTS. -linux, --linux-style Use Linux coding style. See COMMON STYLES. -lp, --continue-at-parentheses Line up continued lines at parentheses. See INDENTATION. -lps, --leave-preprocessor-space Leave space between `#' and preprocessor directive. See INDENTATION. -nbad, --no-blank-lines-after-declarations Do not force blank lines after declarations. See BLANK LINES. -nbap, --no-blank-lines-after-procedures Do not force blank lines after procedure bodies. See BLANK LINES. -nbbo, --break-after-boolean-operator Do not prefer to break long lines before boolean operators. See BREAKING LONG LINES. -nbc, --no-blank-lines-after-commas Do not force newlines after commas in declarations. See DECLARATIONS. -nbfda, --dont-break-function-decl-args Don't put each argument in a function declaration on a separate line. See DECLARATIONS. -ncdb, --no-comment-delimiters-on-blank-lines Do not put comment delimiters on blank lines. See COMMENTS. -ncdw, --dont-cuddle-do-while Do not cuddle } and the while of a do {} while;. See STATEMENTS. -nce, --dont-cuddle-else Do not cuddle } and else. See STATEMENTS. -ncs, --no-space-after-casts Do not put a space after cast operators. See STATEMENTS. -ndjn, --dont-left-justify-declarations Comments after declarations are treated the same as comments after other statements. See DECLARATIONS. -nfc1, --dont-format-first-column-comments Do not format comments in the first column as normal. See COMMENTS. -nfca, --dont-format-comments Do not format any comments. See COMMENTS. -ngts, --no-gettext-strings Treat gettext _("...") and N_("...") as normal functions. This is the default. See BREAKING LONG LINES. -nhnl, --ignore-newlines Do not prefer to break long lines at the position of newlines in the input. See BREAKING LONG LINES. -nip, --no-parameter-indentation Zero width indentation for parameters. See INDENTATION. -nlp, --dont-line-up-parentheses Do not line up parentheses. See STATEMENTS. -npcs, --no-space-after-function-call-names Do not put space after the function in function calls. See STATEMENTS. -nprs, --no-space-after-parentheses Do not put a space after every '(' and before every ')'. See STATEMENTS. -npsl, --dont-break-procedure-type Put the type of a procedure on the same line as its name. See DECLARATIONS. -nsaf, --no-space-after-for Do not put a space after every for. See STATEMENTS. -nsai, --no-space-after-if Do not put a space after every if. See STATEMENTS. -nsaw, --no-space-after-while Do not put a space after every while. See STATEMENTS. -nsc, --dont-star-comments Do not put the `*' character at the left of comments. See COMMENTS. -nsob, --leave-optional-blank-lines Do not swallow optional blank lines. See BLANK LINES. -nss, --dont-space-special-semicolon Do not force a space before the semicolon after certain statements. Disables `-ss'. See STATEMENTS. -ntac, --dont-tab-align-comments Do not pad comments out to the nearest tabstop. See COMMENTS. -nut, --no-tabs Use spaces instead of tabs. See INDENTATION. -nv, --no-verbosity Disable verbose mode. See MISCELLANEOUS OPTIONS. -orig, --original Use the original Berkeley coding style. See COMMON STYLES. -npro, --ignore-profile Do not read `.indent.pro' files. See INVOKING INDENT. -pal, --pointer-align-left Put asterisks in pointer declarations on the left of spaces, next to types: ``char* p''. -par, --pointer-align-right Put asterisks in pointer declarations on the right of spaces, next to variable names: ``char *p''. This is the default behavior. -pcs, --space-after-procedure-calls Insert a space between the name of the procedure being called and the `('. See STATEMENTS. -pin, --paren-indentationn Specify the extra indentation per open parentheses '(' when a statement is broken.See STATEMENTS. -pmt, --preserve-mtime Preserve access and modification times on output files.See MISCELLA- NEOUS OPTIONS. -ppin, --preprocessor-indentationn Specify the indentation for preprocessor conditional statements.See INDENTATION. -prs, --space-after-parentheses Put a space after every '(' and before every ')'. See STATEMENTS. -psl, --procnames-start-lines Put the type of a procedure on the line before its name. See DECLARATIONS. -saf, --space-after-for Put a space after each for. See STATEMENTS. -sai, --space-after-if Put a space after each if. See STATEMENTS. -sar, --spaces-around-initializers Put a space after the `{' and before the `}' in initializers. See DECLARATIONS. -saw, --space-after-while Put a space after each while. See STATEMENTS. -sbin, --struct-brace-indentationn Indent braces of a struct, union or enum N spaces. See STATEMENTS. -sc, --start-left-side-of-comments Put the `*' character at the left of comments. See COMMENTS. -slc, --single-line-conditionals Allow for unbraced conditionals (if, else, etc.) to have their inner statement on the same line. See STATEMENTS. -sob, --swallow-optional-blank-lines Swallow optional blank lines. See BLANK LINES. -ss, --space-special-semicolon On one-line for and while statements, force a blank before the semi- colon. See STATEMENTS. -st, --standard-output Write to standard output. See INVOKING INDENT. -T Tell indent the name of typenames. See DECLARATIONS. -tsn, --tab-sizen Set tab size to n spaces. See INDENTATION. -ut, --use-tabs Use tabs. This is the default. See INDENTATION. -v, --verbose Enable verbose mode. See MISCELLANEOUS OPTIONS. -version Output the version number of indent. See MISCELLANEOUS OPTIONS. INVOKING INDENT As of version 1.3, the format of the indent command is: indent [options] [input-files] indent [options] [single-input-file] [-o output-file] This format is different from earlier versions and other versions of in- dent. In the first form, one or more input files are specified. indent makes a backup copy of each file, and the original file is replaced with its in- dented version. See BACKUP FILES, for an explanation of how backups are made. In the second form, only one input file is specified. In this case, or when the standard input is used, you may specify an output file after the `-o' option. To cause indent to write to standard output, use the `-st' option. This is only allowed when there is only one input file, or when the standard input is used. If no input files are named, the standard input is read for input. Also, if a filename named `-' is specified, then the standard input is read. As an example, each of the following commands will input the program `slithy_toves.c' and write its indented text to `slithy_toves.out': indent slithy_toves.c -o slithy_toves.out indent -st slithy_toves.c > slithy_toves.out cat slithy_toves.c | indent -o slithy_toves.out Most other options to indent control how programs are formatted. As of version 1.2, indent also recognizes a long name for each option name. Long options are prefixed by either `--' or `+'. [ `+' is being superseded by `--' to maintain consistency with the POSIX standard.] In most of this document, the traditional, short names are used for the sake of brevity. See OPTION SUMMARY, for a list of options, including both long and short names. Here is another example: indent -br test/metabolism.c -l85 This will indent the program `test/metabolism.c' using the `-br' and `-l85' options, write the output back to `test/metabolism.c', and write the origi- nal contents of `test/metabolism.c' to a backup file in the directory `test'. Equivalent invocations using long option names for this example would be: indent --braces-on-if-line --line-length185 test/metabolism.c indent +braces-on-if-line +line-length185 test/metabolism.c If you find that you often use indent with the same options, you may put those options into a file named `.indent.pro'. indent will look for a pro- file file in three places. First it will check the environment variable IN- DENT_PROFILE. If that exists its value is expected to name the file that is to be used. If the environment variable does not exist, indent looks for `.indent.pro' in the current directory and use that if found. Finally indent will search your home directory for `.indent.pro' and use that file if it is found. This behaviour is differ- ent from that of other versions of indent, which load both files if they both exist. The format of `.indent.pro' is simply a list of options, just as they would appear on the command line, separated by white space (tabs, spaces, and newlines). Options in `.indent.pro' may be surrounded by C or C++ com- ments, in which case they are ignored. Command line switches are handled after processing `.indent.pro'. Options specified later override arguments specified earlier, with one exception: Explicitly specified options always override background options (See COM- MON STYLES). You can prevent indent from reading an `.indent.pro' file by specifying the `-npro' option. BACKUP FILES As of version 1.3, GNU indent makes GNU-style backup files, the same way GNU Emacs does. This means that either simple or numbered backup filenames may be made. Simple backup file names are generated by appending a suffix to the origi- nal file name. The default for this suffix is the one-character string `~' (tilde). Thus, the backup file for `python.c' would be `python.c~'. Instead of the default, you may specify any string as a suffix by setting the environment variable SIMPLE_BACKUP_SUFFIX to your preferred suffix. Numbered backup versions of a file `momeraths.c' look like `mo- meraths.c.~23~', where 23 is the version of this particular backup. When making a numbered backup of the file `src/momeraths.c', the backup file will be named `src/momeraths.c.~V~', where V is one greater than the high- est version currently existing in the directory `src'. The environment variable VERSION_WIDTH controls the number of digits, using left zero padding when necessary. For instance, setting this variable to "2" will lead to the backup file being named `momeraths.c.~04~'. The type of backup file made is controlled by the value of the environment variable VERSION_CONTROL. If it is the string `simple', then only simple backups will be made. If its value is the string `numbered', then numbered backups will be made. If its value is `numbered-existing', then numbered backups will be made if there already exist numbered backups for the file being indented; otherwise, a simple backup is made. If VERSION_CONTROL is not set, then indent assumes the behaviour of `numbered-existing'. Other versions of indent use the suffix `.BAK' in naming backup files. This behaviour can be emulated by setting SIMPLE_BACKUP_SUFFIX to `.BAK'. Note also that other versions of indent make backups in the current direc- tory, rather than in the directory of the source file as GNU indent now does. COMMON STYLES There are several common styles of C code, including the GNU style, the Kernighan & Ritchie style, and the original Berkeley style. A style may be selected with a single background option, which specifies a set of values for all other options. However, explicitly specified options always over- ride options implied by a background option. As of version 1.2, the default style of GNU indent is the GNU style. Thus, it is no longer necessary to specify the option `-gnu' to obtain this for- mat, although doing so will not cause an error. Option settings which cor- respond to the GNU style are: -nbad -bap -nbc -bbo -bl -bli2 -bls -ncdb -nce -cp1 -cs -di2 -ndj -nfc1 -nfca -hnl -i2 -ip5 -lp -pcs -nprs -psl -saf -sai -saw -nsc -nsob The GNU coding style is that preferred by the GNU project. It is the style that the GNU Emacs C mode encourages and which is used in the C portions of GNU Emacs. (People interested in writing programs for Project GNU should get a copy of "The GNU Coding Standards", which also covers semantic and portability issues such as memory usage, the size of integers, etc.) The Kernighan & Ritchie style is used throughout their well-known book "The C Programming Language". It is enabled with the `-kr' option. The Kernighan & Ritchie style corresponds to the following set of options: -nbad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -nprs -npsl -saf -sai -saw -nsc -nsob -nss -par Kernighan & Ritchie style does not put comments to the right of code in the same column at all times (nor does it use only one space to the right of the code), so for this style indent has arbitrarily chosen column 33. The style of the original Berkeley indent may be obtained by specifying `-orig' (or by specifying `--original', using the long option name). This style is equivalent to the following settings: -nbad -nbap -bbo -bc -br -brs -c33 -cd33 -cdb -ce -ci4 -cli0 -cp33 -di16 -fc1 -fca -hnl -i4 -ip4 -l75 -lp -npcs -nprs -psl -saf -sai -saw -sc -nsob -nss -ts8 The Linux style is used in the linux kernel code and drivers. Code gener- ally has to follow the Linux coding style to be accepted. This style is equivalent to the following settings: -nbad -bap -nbc -bbo -hnl -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -d0 -di1 -nfc1 -i8 -ip0 -l80 -lp -npcs -nprs -npsl -sai -saf -saw -ncs -nsc -sob -nfca -cp33 -ss -ts8 -il1 BLANK LINES Various programming styles use blank lines in different places. indent has a number of options to insert or delete blank lines in specific places. The `-bad' option causes indent to force a blank line after every block of declarations. The `-nbad' option causes indent not to force such blank lines. The `-bap' option forces a blank line after every procedure body. The `-nbap' option forces no such blank line. The `-bbb' option forces a blank line before every boxed comment (See COM- MENTS.) The `-nbbb' option does not force such blank lines. The `-sob' option causes indent to swallow optional blank lines (that is, any optional blank lines present in the input will be removed from the out- put). If the `-nsob' is specified, any blank lines present in the input file will be copied to the output file. --blank-lines-after-declarations The `-bad' option forces a blank line after every block of declarations. The `-nbad' option does not add any such blank lines. For example, given the input char *foo; char *bar; /* This separates blocks of declarations. */ int baz; indent -bad produces char *foo; char *bar; /* This separates blocks of declarations. */ int baz; and indent -nbad produces char *foo; char *bar; /* This separates blocks of declarations. */ int baz; --blank-lines-after-procedures The `-bap' option forces a blank line after every procedure body. For example, given the input int foo () { puts("Hi"); } /* The procedure bar is even less interesting. */ char * bar () { puts("Hello"); } indent -bap produces int foo () { puts ("Hi"); } /* The procedure bar is even less interesting. */ char * bar () { puts ("Hello"); } and indent -nbap produces int foo () { puts ("Hi"); } /* The procedure bar is even less interesting. */ char * bar () { puts ("Hello"); } No blank line will be added after the procedure foo. COMMENTS indent formats both C and C++ comments. C comments are begun with `/*', terminated with `*/' and may contain newline characters. C++ comments be- gin with the delimiter `//' and end at the newline. indent handles comments differently depending upon their context. indent attempts to distinguish between comments which follow statements, comments which follow declarations, comments following preprocessor directives, and comments which are not preceded by code of any sort, i.e., they begin the text of the line (although not necessarily in column 1). indent further distinguishes between comments found outside of procedures and aggregates, and those found within them. In particular, comments be- ginning a line found within a procedure will be indented to the column at which code is currently indented. The exception to this is a comment be- ginning in the leftmost column; such a comment is output at that column. indent attempts to leave boxed comments unmodified. The general idea of such a comment is that it is enclosed in a rectangle or ``box'' of stars or dashes to visually set it apart. More precisely, boxed comments are de- fined as those in which the initial `/*' is followed immediately by the character `*', `=', `_', or `-', or those in which the beginning comment delimiter (`/*') is on a line by itself, and the following line begins with a `*' in the same column as the star of the opening delimiter. Examples of boxed comments are: /********************** * Comment in a box!! * **********************/ /* * A different kind of scent, * for a different kind of comment. */ indent attempts to leave boxed comments exactly as they are found in the source file. Thus the indentation of the comment is unchanged, and its length is not checked in any way. The only alteration made is that an em- bedded tab character may be converted into the appropriate number of spaces. If the `-bbb' option is specified, all such boxed comments will be preceded by a blank line, unless such a comment is preceded by code. Comments which are not boxed comments may be formatted, which means that the line is broken to fit within a right margin and left-filled with white- space. Single newlines are equivalent to a space, but blank lines (two or more newlines in a row) are taken to mean a paragraph break. Formatting of comments which begin after the first column is enabled with the `-fca' op- tion. To format those beginning in column one, specify `-fc1'. Such for- matting is disabled by default. The right margin for formatting defaults to 78, but may be changed with the `-lc' option. If the margin specified does not allow the comment to be printed, the margin will be automatically extended for the duration of that comment. The margin is not respected if the comment is not being format- ted. If the `-fnc' option is specified, all comments with `/*' embedded will have that character sequence replaced by a space followed by the character `*' thus eliminating nesting. If the comment begins a line (i.e., there is no program text to its left), it will be indented to the column it was found in unless the comment is within a block of code. In that case, such a comment will be aligned with the indented code of that block (unless the comment began in the first col- umn). This alignment may be affected by the `-d' option, which specifies an amount by which such comments are moved to the left, or unindented. For example, `-d2' places comments two spaces to the left of code. By default, comments are aligned with code, unless they begin in the first column, in which case they are left there by default --- to get them aligned with the code, specify `-fc1'. Comments to the right of code will appear by default in column 33. This may be changed with one of three options. `-c' will specify the column for comments following code, `-cd' specifies the column for comments following declarations, and `-cp' specifies the column for comments following pre- processor directives #else and #endif. `-dj' together with `-cd0' can be used to suppress alignment of comments to the right of declarations, caus- ing the comment to follow one tabstop from the end of the declaration. Nor- mally `-cd0' causes `-c' to become effective. If the code to the left of the comment exceeds the beginning column, the comment column will be extended to the next tabstop column past the end of the code, unless the `-ntac' option is specified. In the case of pre- processor directives,comments are extended to to one space past the end of the directive. This extension lasts only for the output of that particular comment. The `-cdb' option places the comment delimiters on blank lines. Thus, a single line comment like /* Loving hug */ can be transformed into: /* Loving hug */ Stars can be placed at the beginning of multi-line comments with the `-sc' option. Thus, the single-line comment above can be transformed (with `-cdb -sc') into: /* * Loving hug */ STATEMENTS The `-br' or `-bl' option specifies how to format braces. The `-br' option formats statement braces like this: if (x > 0) { x--; } The `-bl' option formats them like this: if (x > 0) { x--; } If you use the `-bl' option, you may also want to specify the `-bli' op- tion. This option specifies the number of spaces by which braces are in- dented. `-bli2', the default, gives the result shown above. `-bli0' re- sults in the following: if (x > 0) { x--; } If you are using the `-br' option, you probably want to also use the `-ce' option. This causes the else in an if-then-else construct to cuddle up to the immediately preceding `}'. For example, with `-br -ce' you get the following: if (x > 0) { x--; } else { fprintf (stderr, "...something wrong?\n"); } With `-br -nce' that code would appear as if (x > 0) { x--; } else { fprintf (stderr, "...something wrong?\n"); } An exception to the behavior occurs when there is a comment between the right brace and the subsequent else statement. While the `-br' option will cause a left brace to jump over the comment, the else does not jump over the comment to cuddle because it has a strong likelihood of changing the meaning of the comment. The `-cdw' option causes the while in a do-while loop to cuddle up to the immediately preceding `}'. For example, with `-cdw' you get the following: do { x--; } while (x); With `-ncdw' that code would appear as do { x--; } while (x); The `-slc' option allows for an unbraced conditional and its inner state- ment to appear on the same line. For example: if (x) x--; else x++; Without `-slc' that code would appear as if (x) x--; else x++; The `-cli' option specifies the number of spaces that case labels should be indented to the right of the containing switch statement. The default gives code like: switch (i) { case 0: break; case 1: { ++i; } default: break; } Using the `-cli2' that would become: switch (i) { case 0: break; case 1: { ++i; } default: break; } The indentation of the braces below a case statement can be controlled with the `-cbin' option. For example, using `-cli2 -cbi0' results in: switch (i) { case 0: break; case 1: { ++i; } default: break; } If a semicolon is on the same line as a for or while statement, the `-ss' option will cause a space to be placed before the semicolon. This empha- sizes the semicolon, making it clear that the body of the for or while statement is an empty statement. `-nss' disables this feature. The `-pcs' option causes a space to be placed between the name of the pro- cedure being called and the `(' (for example, puts ("Hi");. The `-npcs' option would give puts("Hi");). If the `-cs' option is specified, indent puts a space between a cast opera- tor and the object to be cast. The `-ncs' ensures that there is no space between the cast operator and the object. Remember that indent only knows about the standard C data types and so cannot recognise user-defined types in casts. Thus (mytype)thing is not treated as a cast. The `-bs' option ensures that there is a space between the keyword sizeof and its argument. In some versions, this is known as the `Bill_Shannon' option. The `-saf' option forces a space between a for and the following parenthe- sis. This is the default. The `-sai' option forces a space between a if and the following parenthe- sis. This is the default. The `-saw' option forces a space between a while and the following paren- thesis. This is the default. The `-prs' option causes all parentheses to be separated with a space from whatever is between them. For example, using `-prs' results in code like: while ( ( e_code - s_code ) < ( dec_ind - 1 ) ) { set_buf_break ( bb_dec_ind ); *e_code++ = ' '; } DECLARATIONS By default indent will line up identifiers, in the column specified by the `-di' option. For example, `-di16' makes things look like: int foo; char *bar; Using a small value (such as one or two) for the `-di' option can be used to cause the identifiers to be placed in the first available position; for example: int foo; char *bar; The value given to the `-di' option will still affect variables which are put on separate lines from their types, for example `-di2' will lead to: int foo; If the `-bc' option is specified, a newline is forced after each comma in a declaration. For example, int a, b, c; With the `-nbc' option this would look like int a, b, c; The `-bfda' option causes a newline to be forced after the comma separating the arguments of a function declaration. The arguments will appear at one indention level deeper than the function declaration. This is particularly helpful for functions with long argument lists. The option `-bfde' causes a newline to be forced before the closing bracket of the function declara- tion. For both options the 'n' setting is the default: -nbfda and -nbfde. For example, void foo (int arg1, char arg2, int *arg3, long arg4, char arg5); With the `-bfda' option this would look like void foo ( int arg1, char arg2, int *arg3, long arg4, char arg5); With, in addition, the `-bfde' option this would look like void foo ( int arg1, char arg2, int *arg3, long arg4, char arg5 ); The `-psl' option causes the type of a procedure being defined to be placed on the line before the name of the procedure. This style is required for the etags program to work correctly, as well as some of the c-mode func- tions of Emacs. You must use the `-T' option to tell indent the name of all the typenames in your program that are defined by typedef. `-T' can be specified more than once, and all names specified are used. For example, if your program contains typedef unsigned long CODE_ADDR; typedef enum {red, blue, green} COLOR; you would use the options `-T CODE_ADDR -T COLOR'. The `-brs' or `-bls' option specifies how to format braces in struct decla- rations. The `-brs' option formats braces like this: struct foo { int x; }; The `-bls' option formats them like this: struct foo { int x; }; Similarly to the structure brace `-brs' and `-bls' options, the function brace options `-brf' or `-blf' specify how to format the braces in function definitions. The `-brf' option formats braces like this: int one(void) { return 1; }; The `-blf' option formats them like this: int one(void) { return 1; }; The `-sar' option affects how indent will render initializer lists. Without `-sar' they are formatted like this: int a[] = {1, 2, 3, 4}; struct s { const char *name; int x; } a[] = { {"name", 0}, {"a", 1} }; With `-sar' they are formatted like this, with spaces inside the braces: int a[] = { 1, 2, 3, 4 }; struct s { const char *name; int x; } a[] = { { "name", 0 }, { "a", 1 } }; INDENTATION The most basic, and most controversial issues with regard to code format- ting is precisely how indentation should be acoomplished. Fortunately, in- dent supports several different styles of identation. The default is to use tabs for indentation, which is specified by the `-ut' option. Assuming the default tab size of 8, the code would look like this: int a(int b) { return b; |------| 1 tab } For those that prefer spaces to tabs, `indent' provides the `-nut' option. The same code would look like this: int a(int b) { return b; |------| 8 spaces } Another issue in the formatting of code is how far each line should be in- dented from the left margin. When the beginning of a statement such as if or for is encountered, the indentation level is increased by the value specified by the `-i' option. For example, use `-i8' to specify an eight character indentation for each level. When a statement is broken across two lines, the second line is indented by a number of additional spaces specified by the `-ci' option. `-ci' defaults to 0. However, if the `-lp' option is specified, and a line has a left parenthesis which is not closed on that line, then continuation lines will be lined up to start at the character position just after the left parenthesis. This processing also applies to `[' and applies to `{' when it occurs in initialization lists. For example, a piece of continued code might look like this with `-nlp -ci3' in effect: p1 = first_procedure (second_procedure (p2, p3), third_procedure (p4, p5)); With `-lp' in effect the code looks somewhat clearer: p1 = first_procedure (second_procedure (p2, p3), third_procedure (p4, p5)); When a statement is broken in between two or more paren pairs (...), each extra pair causes the indentation level extra indentation: if ((((i < 2 && k > 0) || p == 0) && q == 1) || n = 0) The option `-ipN' can be used to set the extra offset per paren. For in- stance, `-ip0' would format the above as: if ((((i < 2 && k > 0) || p == 0) && q == 1) || n = 0) indent assumes that tabs are placed at regular intervals of both input and output character streams. These intervals are by default 8 columns wide, but (as of version 1.2) may be changed by the `-ts' option. Tabs are treated as the equivalent number of spaces. By default, indent will use tabs to indent as far as possible, and then pad with spaces until the desired position is reached. However, with the `-as' option, spaces will be used for alignment beyond the current indentation level. By default, assuming `-lp' is enabled, the code would be indented like so (`t' represents tabs, `s' represents spaces): unsigned long really_long_proc_name(unsigned long x, unsigned long y, int a) |------||-------||------||-------|__ t t t t ss { p1 = first_procedure (second_procedure (p2, p3), third_procedure (p4, p5)); |------||------||------|_____ t t t sssss } This is fine, if you assume that whoever is reading the code will honor your assumption of 8-space tabs. If the reader was using 4-space tabs, it would look like this: unsigned long really_long_proc_name(unsigned long x, unsigned long y, int a) |---||---||---||---|__ t t t t ss { p1 = first_procedure (second_procedure (p2, p3), third_procedure (p4, p5)); |---||---||---|______ t t t ssssss } The `-as' option fixes this so that the code will appear consistent regard- less of what tab size the user users to read the code. This looks like: unsigned long really_long_proc_name(unsigned long x, unsigned long y, int a) ____________________________________ ssssssssssssssssssssssssssssssssssss { p1 = first_procedure (second_procedure (p2, p3), third_procedure (p4, p5)); |------|______________________ t ssssssssssssssssssssss } The indentation of type declarations in old-style function definitions is controlled by the `-ip' parameter. This is a numeric parameter specifying how many spaces to indent type declarations. For example, the default `-ip5' makes definitions look like this: char * create_world (x, y, scale) int x; int y; float scale; { . . . } For compatibility with other versions of indent, the option `-nip' is pro- vided, which is equivalent to `-ip0'. ANSI C allows white space to be placed on preprocessor command lines be- tween the character `#' and the command name. By default, indent removes this space, but specifying the `-lps' option directs indent to leave this space unmodified. The option `-ppi' overrides `-nlps' and `-lps'. This option can be used to request that preprocessor conditional statements can be indented by to given number of spaces, for example with the option `-ppi 3' #if X #if Y #define Z 1 #else #define Z 0 #endif #endif becomes #if X # if Y # define Z 1 # else # define Z 0 # endif #endif This option sets the offset at which a label (except case labels) will be positioned. If it is set to zero or a positive number, this indicates how far from the left margin to indent a label. If it is set to a negative number, this indicates how far back from the current indent level to place the label. The default setting is -2 which matches the behaviour of ear- lier versions of indent. Note that this parameter does not affect the placing of case labels; see the `-cli' parameter for that. For example with the option `-il 1' group function() { if (do_stuff1() == ERROR) goto cleanup1; if (do_stuff2() == ERROR) goto cleanup2; return SUCCESS; cleanup2: do_cleanup2(); cleanup1: do_cleanup1(); return ERROR; } becomes group function() { if (do_stuff1() == ERROR) goto cleanup1; if (do_stuff2() == ERROR) goto cleanup2; return SUCCESS; cleanup2: do_cleanup2(); cleanup1: do_cleanup1(); return ERROR; } BREAKING LONG LINES With the option `-ln', or `--line-lengthn', it is possible to specify the maximum length of a line of C code, not including possible comments that follow it. When lines become longer than the specified line length, GNU indent tries to break the line at a logical place. This is new as of version 2.1 how- ever and not very intelligent or flexible yet. Currently there are three options that allow one to interfere with the al- gorithm that determines where to break a line. The `-bbo' option causes GNU indent to prefer to break long lines before the boolean operators && and ||. The `-nbbo' option causes GNU indent not have that preference. For example, the default option `-bbo' (together with `--line-length60' and `--ignore-newlines') makes code look like this: if (mask && ((mask[0] == '\0') || (mask[1] == '\0' && ((mask[0] == '0') || (mask[0] == '*'))))) Using the option `-nbbo' will make it look like this: if (mask && ((mask[0] == '\0') || (mask[1] == '\0' && ((mask[0] == '0') || (mask[0] == '*'))))) The default `-hnl', however, honours newlines in the input file by giving them the highest possible priority to break lines at. For example, when the input file looks like this: if (mask && ((mask[0] == '\0') || (mask[1] == '\0' && ((mask[0] == '0') || (mask[0] == '*'))))) then using the option `-hnl', or `--honour-newlines', together with the previously mentioned `-nbbo' and `--line-length60', will cause the output not to be what is given in the last example but instead will prefer to break at the positions where the code was broken in the input file: if (mask && ((mask[0] == '\0') || (mask[1] == '\0' && ((mask[0] == '0') || (mask[0] == '*'))))) The idea behind this option is that lines which are too long, but are al- ready broken up, will not be touched by GNU indent. Really messy code should be run through indent at least once using the `--ignore-newlines' option though. The `-gts' option affects how the gettext standard macros _() and N_() are treated. The default behavior (or the use of `-ngts') causes indent to treat them as it does other functions, so that a long string is broken like the following example. if (mask) { warning (_ ("This is a long string that stays together.")); } With the `-gts' option, the underscore is treated as a part of the string, keeping it tied to the string, and respecting the fact that gettext is un- obtrusively providing a localized string. This only works if _(" is to- gether as a unit at the beginning of the string and ") is together as a unit at the end. if (mask) { warning (_("This is a long string that stays together.")); } DISABLING FORMATTING Formatting of C code may be disabled for portions of a program by embedding special control comments in the program. To turn off formatting for a sec- tion of a program, place the disabling control comment /* *INDENT-OFF* */ on a line by itself just before that section. Program text scanned after this control comment is output precisely as input with no modifications un- til the corresponding enabling comment is scanned on a line by itself. The enabling control comment is /* *INDENT-ON* */, and any text following the comment on the line is also output unformatted. Formatting begins again with the input line following the enabling control comment. More precisely, indent does not attempt to verify the closing delimiter (*/) for these C comments, and any whitespace on the line is totally trans- parent. These control comments also function in their C++ formats, namely // *IN- DENT-OFF* and // *INDENT-ON*. It should be noted that the internal state of indent remains unchanged over the course of the unformatted section. Thus, for example, turning off for- matting in the middle of a function and continuing it after the end of the function may lead to bizarre results. It is therefore wise to be somewhat modular in selecting code to be left unformatted. As a historical note, some earlier versions of indent produced error mes- sages beginning with *INDENT**. These versions of indent were written to ignore any input text lines which began with such error messages. I have removed this incestuous feature from GNU indent. MISCELLANEOUS OPTIONS To find out what version of indent you have, use the command indent -ver- sion. This will report the version number of indent, without doing any of the normal processing. The `-v' option can be used to turn on verbose mode. When in verbose mode, indent reports when it splits one line of input into two more more lines of output, and gives some size statistics at completion. The `-pmt' option causes indent to preserve the access and modification times on the output files. Using this option has the advantage that run- ning indent on all source and header files in a project won't cause make to rebuild all targets. This option is only available on Operating Systems that have the POSIX utime(2) function. BUGS Please report any bugs to bug-indent@gnu.org. When indent is run twice on a file, with the same profile, it should never change that file the second time. With the current design of indent, this can not be guaranteed, and it has not been extensively tested. indent does not understand C. In some cases this leads to the inability to join lines. The result is that running a file through indent is irre- versible, even if the used input file was the result of running indent with a given profile (`.indent.pro'). While an attempt was made to get indent working for C++, it will not do a good job on any C++ source except the very simplest. indent does not look at the given `--line-length' option when writing com- ments to the output file. This results often in comments being put far to the right. In order to prohibit indent from joining a broken line that has a comment at the end, make sure that the comments start on the first line of the break. indent does not count lines and comments (see the `-v' option) when indent is turned off with /* *INDENT-OFF* */. Comments of the form /*UPPERCASE*/ are not treated as comment but as an identifier, causing them to be joined with the next line. This renders com- ments of this type useless, unless they are embedded in the code to begin with. COPYRIGHT The following copyright notice applies to the indent program. The copy- right and copying permissions for this manual appear near the beginning of `indent.texinfo' and `indent.info', and near the end of `indent.1'. Copyright (c) 2015 Tim Hentenaar. Copyright (c) 2001 David Ingamells. Copyright (c) 1999 Carlo Wood. Copyright (c) 1995, 1996 Joseph Arceneaux. Copyright (c) 1989, 1992, 1993, 1994, 1995, 1996, 2014 Free Software Foundation Copyright (c) 1985 Sun Microsystems, Inc. Copyright (c) 1980 The Regents of the University of California. Copyright (c) 1976 Board of Trustees of the University of Illinois. All rights reserved. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley, the University of Illinois, Urbana, and Sun Microsystems, Inc. The name of either University or Sun Microsystems may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. Options' Cross Key Here is a list of options alphabetized by long option, to help you find the corresponding short option. --align-with-spaces -as --blank-lines-after-commas -bc --blank-lines-after-declarations -bad --blank-lines-after-procedures -bap --blank-lines-before-block-comments -bbb --braces-after-if-line -bl --braces-after-func-def-line -blf --brace-indent -bli --braces-after-struct-decl-line -bls --braces-on-if-line -br --braces-on-func-def-line -brf --braces-on-struct-decl-line -brs --break-after-boolean-operator -nbbo --break-before-boolean-operator -bbo --break-function-decl-args -bfda --break-function-decl-args-end -bfde --case-indentation -clin --case-brace-indentation -cbin --comment-delimiters-on-blank-lines -cdb --comment-indentation -cn --continuation-indentation -cin --continue-at-parentheses -lp --cuddle-do-while -cdw --cuddle-else -ce --declaration-comment-column -cdn --declaration-indentation -din --dont-break-function-decl-args -nbfda --dont-break-function-decl-args-end -nbfde --dont-break-procedure-type -npsl --dont-cuddle-do-while -ncdw --dont-cuddle-else -nce --dont-format-comments -nfca --dont-format-first-column-comments -nfc1 --dont-line-up-parentheses -nlp --dont-left-justify-declarations -ndj --dont-space-special-semicolon -nss --dont-star-comments -nsc --dont-tab-align-comments -ntac --else-endif-column -cpn --format-all-comments -fca --format-first-column-comments -fc1 --gnu-style -gnu --honour-newlines -hnl --ignore-newlines -nhnl --ignore-profile -npro --indent-label -iln --indent-level -in --k-and-r-style -kr --leave-optional-blank-lines -nsob --leave-preprocessor-space -lps --left-justify-declarations -dj --line-comments-indentation -dn --line-length -ln --linux-style -linux --no-blank-lines-after-commas -nbc --no-blank-lines-after-declarations -nbad --no-blank-lines-after-procedures -nbap --no-blank-lines-before-block-comments -nbbb --no-comment-delimiters-on-blank-lines -ncdb --no-space-after-casts -ncs --no-parameter-indentation -nip --no-space-after-for -nsaf --no-space-after-function-call-names -npcs --no-space-after-if -nsai --no-space-after-parentheses -nprs --no-space-after-while -nsaw --no-tabs -nut --no-verbosity -nv --original -orig --parameter-indentation -ipn --paren-indentation -pin --preserve-mtime -pmt --preprocessor-indentation -ppin --procnames-start-lines -psl --single-line-conditionals -slc --space-after-cast -cs --space-after-for -saf --space-after-if -sai --space-after-parentheses -prs --space-after-procedure-calls -pcs --space-after-while -saw --space-special-semicolon -ss --spaces-around-initializers -sar --standard-output -st --start-left-side-of-comments -sc --struct-brace-indentation -sbin --swallow-optional-blank-lines -sob --tab-size -tsn --use-tabs -ut --verbose -v RETURN VALUE Unknown FILES $HOME/.indent.pro holds default options for indent. AUTHORS Tim Hentenaar Carlo Wood Joseph Arceneaux Jim Kingdon David Ingamells HISTORY Derived from the UCB program "indent". COPYING Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 2014, 2015 Free Software Foundation, Inc. Copyright (C) 1995, 1996 Joseph Arceneaux. Copyright (C) 1999 Carlo Wood. Copyright (C) 2001 David Ingamells. Copyright (C) 2013 Aukasz Stelmach. Copyright (C) 2015 Tim Hentenaar. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. INDENT(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | INVOKING INDENT | BACKUP FILES | COMMON STYLES | BLANK LINES | --blank-lines-after-declarations | --blank-lines-after-procedures | COMMENTS | STATEMENTS | DECLARATIONS | INDENTATION | BREAKING LONG LINES | DISABLING FORMATTING | MISCELLANEOUS OPTIONS | BUGS | COPYRIGHT | Options' Cross Key | RETURN VALUE | FILES | AUTHORS | HISTORY | COPYING
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gindent&sektion=1&manpath=FreeBSD+15.1-RELEASE+and+Ports>