FreeBSD Manual Pages
MAIL(1) General Commands Manual MAIL(1) NAME mail, Mail, mailx -- send and receive mail SYNOPSIS mail [-dEiInv] [-s subject] [-c cc-addr] [-b bcc-addr] [-F] to-addr ... [-sendmail-option ...] mail [-dEHiInNv] [-F] -f [name] mail [-dEHiInNv] [-F] [-u user] mail [-d] -e [-f name] INTRODUCTION The mail utility is an intelligent mail processing system, which has a com- mand syntax reminiscent of ed(1) with lines replaced by messages. The following options are available: -v Verbose mode. The details of delivery are displayed on the user's terminal. -d Debugging mode. See the debug mail option for details. -e Test for the presence of mail in the (by default, system) mailbox. An exit status of 0 is returned if it has mail; otherwise, an exit status of 1 is returned. -H Write a header summary only, then exit. -E Do not send messages with an empty body. This is useful for piping errors from cron(8) scripts. -i Ignore tty interrupt signals. This is particularly useful when us- ing mail on noisy phone lines. -I Force mail to run in interactive mode even when input is not a ter- minal. In particular, the `~' special character when sending mail is only active in interactive mode. -n Inhibit reading the system-wide mail.rc files upon startup. -N Inhibit the initial display of message headers when reading mail or editing a mail folder. -s subject Specify subject on command line. (Only the first argument after the -s flag is used as a subject; be careful to quote subjects con- taining spaces.) -c cc-addr Send carbon copies to cc-addr list of users. The cc-addr argument should be a comma-separated list of names. -b bcc-addr Send blind carbon copies to bcc-addr list of users. The bcc-addr argument should be a comma-separated list of names. -f [mbox] Read in the contents of your mbox (or the specified file) for pro- cessing; when you quit, mail writes undeleted messages back to this file. -F Record the message in a file named after the first recipient. The name is the login-name portion of the address found first on the "To:" line in the mail header. Overrides the record variable, if set. -u user Is equivalent to: mail -f /var/mail/user Startup Actions At startup time mail will execute commands in the system command files /usr/share/misc/mail.rc, /usr/local/etc/mail.rc and /etc/mail.rc in order, unless explicitly told not to by the use of the -n option. Next, the com- mands in the user's personal command file ~/.mailrc are executed. The mail utility then examines its command line options to determine whether a new message is to be sent, or whether an existing mailbox is to be read. Sending Mail To send a message to one or more people, mail can be invoked with arguments which are the names of people to whom the mail will be sent. You are then expected to type in your message, followed by a <control-D> at the begin- ning of a line. The section below "Replying To or Originating Mail", de- scribes some features of mail available to help you compose your letter. Reading Mail In normal usage mail is given no arguments and checks your mail out of the post office, then prints out a one line header of each message found. The current message is initially the first message (numbered 1) and can be printed using the print command (which can be abbreviated p). You can move among the messages much as you move between lines in ed(1), with the com- mands + and - moving backwards and forwards, and simple numbers. Disposing of Mail After examining a message you can delete (d) the message or reply (r) to it. Deletion causes the mail program to forget about the message. This is not irreversible; the message can be undeleted (u) by giving its number, or the mail session can be aborted by giving the exit (x) command. Deleted messages will, however, usually disappear never to be seen again. Specifying Messages Commands such as print and delete can be given a list of message numbers as arguments to apply to a number of messages at once. Thus "delete 1 2" deletes messages 1 and 2, while "delete 1-5" deletes messages 1 through 5. The special name `*' addresses all messages, and `$' addresses the last message; thus the command top which prints the first few lines of a message could be used in "top *" to print the first few lines of all messages. Replying To or Originating Mail You can use the reply command to set up a response to a message, sending it back to the person who it was from. Text you then type in, up to an end- of-file, defines the contents of the message. While you are composing a message, mail treats lines beginning with the character `~' specially. For instance, typing ~m (alone on a line) will place a copy of the current mes- sage into the response right shifting it by a tabstop (see indentprefix variable, below). Other escapes will set up subject fields, add and delete recipients to the message and allow you to escape to an editor to revise the message or to a shell to run some commands. (These options are given in the summary below.) Ending a Mail Processing Session You can end a mail session with the quit (q) command. Messages which have been examined go to your mbox file unless they have been deleted in which case they are discarded. Unexamined messages go back to the post office. (See the -f option above). Personal and System Wide Distribution Lists It is also possible to create a personal distribution lists so that, for instance, you can send mail to "cohorts" and have it go to a group of peo- ple. Such lists can be defined by placing a line like alias cohorts bill ozalp jkf mark kridle@ucbcory in the file .mailrc in your home directory. The current list of such aliases can be displayed with the alias command in mail. System wide dis- tribution lists can be created by editing /etc/mail/aliases, see aliases(5) and sendmail(8); these are kept in a different syntax. In mail you send, personal aliases will be expanded in mail sent to others so that they will be able to reply to the recipients. System wide aliases are not expanded when the mail is sent, but any reply returned to the machine will have the system wide alias expanded as all mail goes through sendmail(8). Network Mail (ARPA, UUCP, Berknet) The mail utility has a number of options which can be set in the .mailrc file to alter its behavior; thus "set askcc" enables the askcc feature. (These options are summarized below.) SUMMARY (Adapted from the Mail Reference Manual.) Each command is typed on a line by itself, and may take arguments following the command word. The command need not be typed in its entirety -- the first command which matches the typed prefix is used. For commands which take message lists as arguments, if no message list is given, then the next message forward which satisfies the command's requirements is used. If there are no messages forward of the current message, the search proceeds backwards, and if there are no good messages at all, mail types "No applic- able messages" and aborts the command. - Print out the preceding message. If given a numeric argument n, goes to the n'th previous message and prints it. # ignore the remainder of the line as a comment. ? Prints a brief summary of commands. ! Executes the shell (see sh(1) and csh(1)) command which follows. Print (P) Like print but also prints out ignored header fields. See also print, ignore and retain. Reply (R) Reply to originator. Does not reply to other recipients of the original message. Type (T) Identical to the Print command. alias (a) With no arguments, prints out all currently-defined aliases. With one argument, prints out that alias. With more than one argu- ment, creates a new alias or changes an old one. alternates (alt) The alternates command is useful if you have accounts on sev- eral machines. It can be used to inform mail that the listed ad- dresses are really you. When you reply to messages, mail will not send a copy of the message to any of the addresses listed on the alternates list. If the alternates command is given with no argu- ment, the current set of alternative names is displayed. chdir (c) Changes the user's working directory to that specified, if given. If no directory is given, then changes to the user's login directory. copy (co) The copy command does the same thing that save does, except that it does not mark the messages it is used on for deletion when you quit. delete (d) Takes a list of messages as argument and marks them all as deleted. Deleted messages will not be saved in mbox, nor will they be available for most other commands. dp (also dt) Deletes the current message and prints the next message. If there is no next message, mail says "at EOF". edit (e) Takes a list of messages and points the text editor at each one in turn. On return from the editor, the message is read back in. exit (ex or x) Effects an immediate return to the shell without modify- ing the user's system mailbox, his mbox file, or his edit file in -f. file (fi) The same as folder. folders List the names of the folders in your folder directory. folder (fo) The folder command switches to a new mail file or folder. With no arguments, it tells you which file you are currently read- ing. If you give it an argument, it will write out changes (such as deletions) you have made in the current file and read in the new file. Some special conventions are recognized for the name. `#' means the previous file, `%' means your system mailbox, "%user" means user's system mailbox, `&' means your mbox file, and "+folder" means a file in your folder directory. from (f) Takes a list of messages and prints their message headers. headers (h) Lists the current range of headers, which is an 18-message group. If a `+' argument is given, then the next 18-message group is printed, and if a `-' argument is given, the previous 18-message group is printed. help A synonym for ?. hold (ho, also preserve) Takes a message list and marks each message therein to be saved in the user's system mailbox instead of in mbox. Does not override the delete command. ignore Add the list of header fields named to the ignored list. Header fields in the ignore list are not printed on your terminal when you print a message. This command is very handy for suppression of certain machine-generated header fields. The Type and Print com- mands can be used to print a message in its entirety, including ig- nored fields. If ignore is executed with no arguments, it lists the current set of ignored fields. inc Incorporate any new messages that have arrived while mail is being read. The new messages are added to the end of the message list, and the current message is reset to be the first new mail message. This does not renumber the existing message list, nor does it cause any changes made so far to be saved. mail (m) Takes as argument login names and distribution group names and sends mail to those people. mbox Indicate that a list of messages be sent to mbox in your home di- rectory when you quit. This is the default action for messages if you do not have the hold option set. more (mo) Takes a list of messages and invokes the pager on that list. next (n, like + or CR) Goes to the next message in sequence and types it. With an argument list, types the next matching message. preserve (pre) A synonym for hold. print (p) Takes a message list and types out each message on the user's terminal. quit (q) Terminates the session, saving all undeleted, unsaved messages in the user's mbox file in his login directory, preserving all mes- sages marked with hold or preserve or never referenced in his sys- tem mailbox, and removing all other messages from his system mail- box. If new mail has arrived during the session, the message "You have new mail" is given. If given while editing a mailbox file with the -f flag, then the edit file is rewritten. A return to the shell is effected, unless the rewrite of edit file fails, in which case the user can escape with the exit command. reply (r) Takes a message list and sends mail to the sender and all re- cipients of the specified message. The default message must not be deleted. respond A synonym for reply. retain Add the list of header fields named to the retained list. Only the header fields in the retained list are shown on your terminal when you print a message. All other header fields are suppressed. The type and print commands can be used to print a message in its en- tirety. If retain is executed with no arguments, it lists the cur- rent set of retained fields. save (s) Takes a message list and a filename and appends each message in turn to the end of the file. The filename in quotes, followed by the line count and character count is echoed on the user's termi- nal. set (se) With no arguments, prints all variable values. Otherwise, sets option. Arguments are of the form option=value (no space be- fore or after `=') or option. Quotation marks may be placed around any part of the assignment statement to quote blanks or tabs, i.e. "set indentprefix="->"" saveignore Saveignore is to save what ignore is to print and type. Header fields thus marked are filtered out when saving a message by save or when automatically saving to mbox. saveretain Saveretain is to save what retain is to print and type. Header fields thus marked are the only ones saved with a message when sav- ing by save or when automatically saving to mbox. Saveretain over- rides saveignore. shell (sh) Invokes an interactive version of the shell. size Takes a message list and prints out the size in characters of each message. source The source command reads commands from a file. top Takes a message list and prints the top few lines of each. The number of lines printed is controlled by the variable toplines and defaults to 5. type (t) A synonym for print. unalias Takes a list of names defined by alias commands and discards the remembered groups of users. The group names no longer have any significance. undelete (u) Takes a message list and marks each message as not being deleted. unread (U) Takes a message list and marks each message as not having been read. unset Takes a list of option names and discards their remembered values; the inverse of set. visual (v) Takes a message list and invokes the display editor on each message. write (w) Similar to save, except that only the message body (without the header) is saved. Extremely useful for such tasks as sending and receiving source program text over the message system. xit (x) A synonym for exit. z The mail utility presents message headers in windowfuls as de- scribed under the headers command. You can move mail's attention forward to the next window with the z command. Also, you can move to the previous window by using z-. Tilde/Escapes Here is a summary of the tilde escapes, which are used when composing mes- sages to perform special functions. Tilde escapes are only recognized at the beginning of lines. The name "tilde escape" is somewhat of a misnomer since the actual escape character can be set by the option escape. ~a Inserts the autograph string from the sign= option into the mes- sage. ~A Inserts the autograph string from the Sign= option into the mes- sage. ~b name ... Add the given names to the list of carbon copy recipients but do not make the names visible in the Cc: line ("blind" carbon copy). ~c name ... Add the given names to the list of carbon copy recipients. ~d Read the file dead.letter from your home directory into the mes- sage. ~e Invoke the text editor on the message collected so far. After the editing session is finished, you may continue appending text to the message. ~f messages Read the named messages into the message being sent. If no mes- sages are specified, read in the current message. Message headers currently being ignored (by the ignore or retain command) are not included. ~F messages Identical to ~f, except all message headers are included. ~h Edit the message header fields by typing each one in turn and al- lowing the user to append text to the end or modify the field by using the current terminal erase and kill characters. ~i string Inserts the value of the named option into the text of the message. ~m messages Read the named messages into the message being sent, indented by a tab or by the value of indentprefix. If no messages are specified, read the current message. Message headers currently being ignored (by the ignore or retain command) are not included. ~M messages Identical to ~m, except all message headers are included. ~p Print out the message collected so far, prefaced by the message header fields. ~q Abort the message being sent, copying the message to dead.letter in your home directory if save is set. ~r filename, ~r !command ~< filename, ~< !command Read the named file into the message. If the argument begins with a `!', the rest of the string is taken as an arbitrary system com- mand and is executed, with the standard output inserted into the message. ~R string Use string as the Reply-To field. ~s string Cause the named string to become the current subject field. ~t name ... Add the given names to the direct recipient list. ~v Invoke an alternative editor (defined by the VISUAL environment variable) on the message collected so far. Usually, the alterna- tive editor will be a screen editor. After you quit the editor, you may resume appending text to the end of your message. ~w filename Write the message onto the named file. ~x Exits as with ~q, except the message is not saved in dead.letter. ~! command Execute the indicated shell command, then return to the message. ~| command, ~^ command Pipe the message through the command as a filter. If the command gives no output or terminates abnormally, retain the original text of the message. The command fmt(1) is often used as command to re- justify the message. ~: mail-command, ~_ mail-command Execute the given mail command. Not all commands, however, are al- lowed. ~. Simulate end-of-file on input. ~? Print a summary of the available command escapes. ~~ string Insert the string of text in the message prefaced by a single `~'. If you have changed the escape character, then you should double that character in order to send it. Mail Options Options can be set with the set command and can be disabled with the unset or set noname commands. Options may be either binary, in which case it is only significant to see whether they are set or not; or string, in which case the actual value is of interest. If an option is not set, mail will look for an environment variable of the same name. The available options include the following: append Causes messages saved in mbox to be appended to the end rather than prepended. This should always be set (preferably in one of the system-wide mail.rc files). Default is noappend. ask, asksub Causes mail to prompt you for the subject of each message you send. If you respond with simply a newline, no subject field will be sent. Default is asksub. askbcc Causes you to be prompted for additional blind carbon copy recipi- ents at the end of each message. Responding with a newline indi- cates your satisfaction with the current list. Default is noaskbcc. askcc Causes you to be prompted for additional carbon copy recipients at the end of each message. Responding with a newline indicates your satisfaction with the current list. Default is noaskcc. autoinc Causes new mail to be automatically incorporated when it arrives. Setting this is similar to issuing the inc command at each prompt, except that the current message is not reset when new mail arrives. Default is noautoinc. autoprint Causes the delete command to behave like dp; thus, after deleting a message, the next one will be typed automatically. Default is noautoprint. crt The valued option crt is used as a threshold to determine how long a message must be before PAGER is used to read it. If crt is set without a value, then the height of the terminal screen stored in the system is used to compute the threshold (see stty(1)). Default is nocrt. debug Setting the binary option debug is the same as specifying -d on the command line and causes mail to output all sorts of information useful for debugging mail. In case mail is invoked in this mode to send mail, all preparations will be performed and reported about, but the mail will not be actually sent. Default is nodebug. dot The binary option dot causes mail to interpret a period alone on a line as the terminator of a message you are sending. Default is nodot. escape If defined, the first character of this option gives the character to use in place of `~' to denote escapes. flipr Reverses the sense of reply and Reply commands. Default is noflipr. folder The name of the directory to use for storing folders of messages. If this name begins with a `/', mail considers it to be an absolute pathname; otherwise, the folder directory is found relative to your home directory. header If defined, initially display message headers when reading mail or editing a mail folder. Default is header. This option can be dis- abled by giving the -N flag on the command line. hold This option is used to hold messages in the system mailbox by de- fault. Default is nohold. ignore Causes interrupt signals from your terminal to be ignored and echoed as @'s. Default is noignore. ignoreeof An option related to dot is ignoreeof which makes mail refuse to accept a <control-D> as the end of a message. Ignoreeof also ap- plies to mail command mode. Default is noignoreeof. indentprefix String used by the ~m tilde escape for indenting messages, in place of the normal tab character (^I). Be sure to quote the value if it contains spaces or tabs. metoo Usually, when a group is expanded that contains the sender, the sender is removed from the expansion. Setting this option causes the sender to be included in the group. Default is nometoo. quiet Suppresses the printing of the version when first invoked. Default is noquiet. record If defined, gives the pathname of the file used to record all out- going mail. If not defined, outgoing mail is not saved. Default is norecord. Replyall Reverses the sense of reply and Reply commands. Default is noReplyall. save If this option is set, and you abort a message with two RUBOUT (erase or delete), mail will copy the partial letter to the file dead.letter in your home directory. Default is save. searchheaders If this option is set, then a message-list specifier in the form "/x:y" will expand to all messages containing the substring y in the header field x. The string search is case insensitive. If x is omitted, it will default to the "Subject" header field. The form "/to:y" is a special case, and will expand to all messages containing the substring y in the "To", "Cc" or "Bcc" header fields. The check for "to" is case sensitive, so that "/To:y" can be used to limit the search for y to just the "To:" field. Default is nosearchheaders. toplines If defined, gives the number of lines of a message to be printed out with the top command; normally, the first five lines are printed. verbose Setting the option verbose is the same as using the -v flag on the command line. When mail runs in verbose mode, the actual delivery of messages is displayed on the user's terminal. Default is noverbose. ENVIRONMENT DEAD Pathname of the file to save partial messages to in case of inter- rupts or delivery errors. Default is ~/dead.letter. EDITOR Pathname of the text editor to use in the edit command and ~e es- cape. If not defined, then a default editor is used. HOME Pathname of the user's home directory. LISTER Pathname of the directory lister to use in the folders command. Default is /bin/ls. MAIL Location of the user's mailbox. Default is /var/mail. MAILRC Pathname of file containing initial mail commands. Default is ~/.mailrc. MBOX The name of the mailbox file. It can be the name of a folder. The default is mbox in the user's home directory. PAGER Pathname of the program to use in the more command or when crt variable is set. The default paginator less(1) is used if this option is not defined. REPLYTO If set, will be used to initialize the Reply-To field for outgoing messages. SHELL Pathname of the shell to use in the ! command and the ~! escape. A default shell is used if this option is not defined. TMPDIR Pathname of the directory used for creating temporary files. VISUAL Pathname of the text editor to use in the visual command and ~v escape. USER Login name of the user executing mail. FILES /var/mail/* Post office. ~/mbox User's old mail. ~/.mailrc File giving initial mail commands. This can be overridden by setting the MAILRC environment variable. /tmp/R* Temporary files. /usr/share/misc/mail.*help Help files. /usr/share/misc/mail.rc /usr/local/etc/mail.rc /etc/mail.rc System-wide initialization files. Each file will be sourced, in order, if it exists. SEE ALSO fmt(1), newaliases(1), vacation(1), aliases(5), sendmail(8) HISTORY A mail command appeared in Version 1 AT&T UNIX. This man page is derived from The Mail Reference Manual originally written by Kurt Shoens. BUGS There are some flags that are not documented here. Most are not useful to the general user. Usually, mail is just a link to Mail and mailx, which can be confusing. The name of the alternates list is incorrect English (it should be "alternatives"), but is retained for compatibility. FreeBSD ports 15.1 August 8, 2018 MAIL(1)
NAME | SYNOPSIS | INTRODUCTION | SUMMARY | ENVIRONMENT | FILES | SEE ALSO | HISTORY | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mailx&sektion=1&manpath=FreeBSD+15.1-RELEASE+and+Ports>