FreeBSD Manual Pages
MOUNT_FUSEFS(8) System Manager's Manual MOUNT_FUSEFS(8) NAME mount_fusefs -- mount a Fuse file system daemon SYNOPSIS mount_fusefs [-A] [-S] [-v] [-D fuse_daemon] [-O daemon_opts] [-s special] [-m node] [-h] [-V] [-o option ...] special node [fuse_daemon ...] DESCRIPTION Basic usage is to start a fuse daemon on the given special file. In prac- tice, the daemon is assigned a special file automatically, which can then be identified via fstat(1). That special file can then be mounted by mount_fusefs. However, the procedure of spawning a daemon will usually be automated so that it is performed by mount_fusefs. If the command invoking a given fuse_daemon is appended to the list of arguments, mount_fusefs will call the fuse_daemon via that command. In that way the fuse_daemon will be in- structed to attach itself to special. From that on mounting goes as in the simple case. (See "DAEMON MOUNTS".) The special argument will normally be treated as the path of the special file to mount. However, if auto is passed as special, then mount_fusefs will look for a suitable free fuse device by itself. Finally, if special is an integer it will be interpreted as the number of the file descriptor of an already open fuse device (used when the Fuse li- brary invokes mount_fusefs. See "DAEMON MOUNTS"). The options are as follows: -A, --reject-allow_other Prohibit the allow_other mount flag. Intended for use in scripts and the sudoers(5)(ports/security/sudo) file. -S, --safe Run in safe mode (i.e., reject invoking a filesystem daemon). -v Be verbose. -D, --daemon daemon Call the specified daemon. -O, --daemon_opts opts Add opts to the daemon's command line. -s, --special special Use special as special. -m, --mountpath node Mount on node. -h, --help Show help. -V, --version Show version information. -o Mount options are specified via -o. The following options are available (and also their negated versions, by prefixing them with "no"): allow_other Do not apply "STRICT ACCESS POLICY". Only root can use this option. async I/O to the file system may be done asynchronously. Writes may be delayed and/or reordered. default_permissions Enable traditional (file mode based) permission checking in kernel. intr Allow signals to interrupt operations that are blocked waiting for a reply from the server. When this option is in use, system calls may fail with EINTR whenever a signal is received. max_read=n Limit size of read requests to n. neglect_shares Do not refuse unmounting if there are secondary mounts. private Refuse shared mounting of the daemon. This is the default behaviour, to allow sharing, explicitly use -o noprivate. push_symlinks_in Prefix absolute symlinks with the mountpoint. subtype=fsname Suffix fsname to the file system name as reported by statfs(2). This option can be used to identify the file system implemented by fuse_daemon. Besides the above mount options, there is a set of pseudo-mount options which are supported by the Fuse library. One can list these by passing -h to a Fuse daemon. Most of these options only have effect on the behavior of the daemon (that is, their scope is limited to userspace). However, there are some which do require in-kernel support. Currently the options supported by the kernel are: direct_io Bypass the buffer cache system. kernel_cache By default cached buffers of a given file are flushed at each open(2). This option disables this behaviour. DAEMON MOUNTS Usually users do not need to use mount_fusefs directly, as the Fuse library enables Fuse daemons to invoke mount_fusefs. That is, fuse_daemon device mountpoint has the same effect as mount_fusefs auto mountpoint fuse_daemon This is the recommended usage when you want basic usage (eg, run the daemon at a low privilege level but mount it as root). STRICT ACCESS POLICY The strict access policy for Fuse filesystems lets one use the filesystem only if the filesystem daemon has the same credentials (uid, real uid, gid, real gid) as the user. This is applied for Fuse mounts by default and only root can mount without the strict access policy (i.e., the allow_other mount option). This is to shield users from the daemon "spying" on their I/O activities. Users might opt to willingly relax strict access policy (as far as they are concerned) by doing their own secondary mount (See "SHARED MOUNTS"). SHARED MOUNTS A Fuse daemon can be shared (i.e., mounted multiple times). When doing the first (primary) mount, the spawner and the mounter of the daemon must have the same uid, or the mounter should be the superuser. After the primary mount is in place, secondary mounts can be done by anyone unless this feature is disabled by private. The behaviour of a secondary mount is analogous to that of symbolic links: they redirect all filesystem operations to the primary mount. Doing a secondary mount is like signing an agreement: by this action, the mounter agrees that the Fuse daemon can trace her I/O activities. From then on she is not banned from using the filesystem (either via her own mount or via the primary mount), regardless whether allow_other is used or not. The device name of a secondary mount is the device name of the correspond- ing primary mount, followed by a '#' character and the index of the sec- ondary mount; e.g., /dev/fuse0#3. SECURITY System administrators might want to use a custom mount policy (ie., one go- ing beyond the vfs.usermount sysctl). The primary tool for such purposes is sudo(8)(ports/security/sudo). However, given that mount_fusefs is capa- ble of invoking an arbitrary program, one must be careful when doing this. mount_fusefs is designed in a way such that it makes that easy. For this purpose, there are options which disable certain risky features (-S and -A), and command line parsing is done in a flexible way: mixing options and non-options is allowed, but processing them stops at the third non-option argument (after the first two have been utilized as device and mountpoint). The rest of the command line specifies the daemon and its arguments. (Al- ternatively, the daemon, the special and the mount path can be specified using the respective options.) Note that mount_fusefs ignores the environ- ment variable POSIXLY_CORRECT and always behaves as described. In general, to be as scripting / sudoers(5)(ports/security/sudo) friendly as possible, no information has a fixed position in the command line, but once a given piece of information is provided, subsequent arguments/options cannot override it (with the exception of some non-critical ones). ENVIRONMENT MOUNT_FUSEFS_SAFE This has the same effect as the -S option. MOUNT_FUSEFS_VERBOSE This has the same effect as the -v option. MOUNT_FUSEFS_IGNORE_UNKNOWN If set, mount_fusefs will ignore unknown mount options. MOUNT_FUSEFS_CALL_BY_LIB Adjust behavior to the needs of the FUSE library. Cur- rently it effects help output. Although the following variables do not have any effect on mount_fusefs it- self, they affect the behaviour of fuse daemons: FUSE_DEV_NAME Device to attach. If not set, the multiplexer path /dev/fuse is used. FUSE_DEV_FD File descriptor of an opened Fuse device to use. Overrides FUSE_DEV_NAME. FUSE_NO_MOUNT If set, the library will not attempt to mount the filesys- tem, even if a mountpoint argument is supplied. FILES /dev/fuse Fuse device with which the kernel and Fuse daemons can communi- cate. /dev/fuse The multiplexer path. An open(2) performed on it automatically is passed to a free Fuse device by the kernel (which might be created just for this puprose). EXAMPLES Mount the example filesystem in the Fuse distribution (from its directory): either ./fusexmp /mnt/fuse or mount_fusefs auto /mnt/fuse ./fusexmp Doing the same in two steps, using /dev/fuse0: FUSE_DEV_NAME=/dev/fuse ./fusexmp && mount_fusefs /dev/fuse /mnt/fuse A script wrapper for fusexmp which ensures that mount_fusefs does not call any external utility and also provides a hacky (non race-free) automatic device selection: #!/bin/sh -e FUSE_DEV_NAME=/dev/fuse fusexmp mount_fusefs -S /dev/fuse /mnt/fuse "$@" SEE ALSO fstat(1), mount(8), sudo(8)(ports/security/sudo), umount(8) HISTORY mount_fusefs was written as the part of the FreeBSD implementation of the Fuse userspace filesystem framework (see https://github.com/libfuse/libfuse) and first appeared in the sysutils/fusefs-kmod port, supporting FreeBSD 6.0. It was added to the base system in FreeBSD 10.0. CAVEATS This user interface is FreeBSD specific. Secondary mounts should be un- mounted via their device name. If an attempt is made to unmount them via their filesystem root path, the unmount request will be forwarded to the primary mount path. In general, unmounting by device name is less error- prone than by mount path (although the latter will also work under normal circumstances). If the daemon is specified via the -D and -O options, it will be invoked via system(3), and the daemon's command line will also have an "&" control operator appended, so that we do not have to wait for its termination. You should use a simple command line when invoking the daemon via these op- tions. BUGS special is treated as a multiplexer if and only if it is literally the same as auto or /dev/fuse. Other paths which are equivalent with /dev/fuse (eg., /../dev/fuse) are not. FreeBSD ports 15.1 October 9, 2021 MOUNT_FUSEFS(8)
NAME | SYNOPSIS | DESCRIPTION | DAEMON MOUNTS | STRICT ACCESS POLICY | SHARED MOUNTS | SECURITY | ENVIRONMENT | FILES | EXAMPLES | SEE ALSO | HISTORY | CAVEATS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mount_fusefs&sektion=8&manpath=FreeBSD+15.1-RELEASE+and+Ports>