Skip site navigation (1)Skip section navigation (2)

  
 
  

home | help
MPT(4)			     Kernel Interfaces Manual			  MPT(4)

NAME
     mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device scbus
	   device mpt

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   mpt_load="YES"

DESCRIPTION
     The  mpt  driver  provides  support  for the LSI Logic Fusion-MPT family of
     SCSI, Fibre Channel and SAS controllers.

HARDWARE
     The following controllers are supported by the mpt driver:

     *	 LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI)
     *	 LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA)
     *	 LSI Logic FC909 (1Gb/s Fibre Channel)
     *	 LSI Logic FC909A (Dual 1Gb/s Fibre Channel)
     *	 LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel)
     *	 LSI Logic FC929, LSI Logic FC929X,  LSI  Logic  7202XP-LC  (Dual  2Gb/s
	 Fibre Channel)
     *	 LSI Logic FC949X (Dual 4Gb/s Fibre Channel)
     *	 LSI   Logic  FC949E,  LSI  Logic  FC949ES  (Dual  4Gb/s  Fibre  Channel
	 PCI-Express)

     The Ultra 320 SCSI controller chips supported by  the  mpt  driver  can  be
     found onboard on many systems including:

     *	 Dell PowerEdge 1750 through 2850
     *	 IBM eServer xSeries 335

     These  systems  also  contain Integrated RAID Mirroring and Integrated RAID
     Mirroring Enhanced which this driver also supports.

     The SAS controller chips are also present on  many  new  AMD/Opteron  based
     systems,  like  the Sun 4100.  Note that this controller can drive both SAS
     and SATA drives or a mix of them at the same  time.   The	Integrated  RAID
     Mirroring available for these controllers is poorly supported at best.

     The  Fibre  Channel  controller chipset are supported by a broad variety of
     speeds and systems.  The Apple Fibre Channel HBA is  in  fact  the  FC949ES
     card.

     This  driver  also supports target mode for Fibre Channel cards.  This sup-
     port may be enabled by setting the desired role of the  core  via	the  LSI
     Logic  firmware  utility that establishes what roles the card can take on -
     no separate compilation is required.

WARNINGS
     Most controllers supported by the mpt driver  suffer  from  limitations  on
     supported	disk  size  (mostly <2TB).  While most controllers will truncate
     usable disk size, others might behave unexpectedly  and  can  cause  severe
     data  loss.  Refer to the datasheet of the chipset and firmware version for
     information about supported disk size and limitations.

SEE ALSO
     cd(4), ch(4), da(4),  mps(4),  pci(4),  sa(4),  scsi(4),  targ(4),  gmulti-
     path(8), mptutil(8)

     LSI Logic Website, http://www.lsi.com/.

HISTORY
     The mpt driver first appeared in FreeBSD 4.6.

AUTHORS
     The  mpt  driver was originally written for FreeBSD by Greg Ansley and mar-
     ginally improved upon by Matt Jacob <mjacob@FreeBSD.org>.

     Justin Gibbs <gibbs@FreeBSD.org> and Scott Long  <scottl@FreeBSD.org>  have
     made more substantial improvements.

FreeBSD 15.1			January 16, 2021			  MPT(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mpt&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports>

home | help