FreeBSD Manual Pages
OPENSSL-S_CLIENT(1ossl) OpenSSL OPENSSL-S_CLIENT(1ossl) NAME openssl-s_client - SSL/TLS client program SYNOPSIS openssl s_client [-help] [-ssl_config section] [-connect host:port] [-host hostname] [-port port] [-bind host:port] [-proxy host:port] [-proxy_user userid] [-proxy_pass arg] [-unix path] [-4] [-6] [-quic] [-servername name] [-noservername] [-verify depth] [-verify_return_error] [-verify_quiet] [-verifyCAfile filename] [-verifyCApath dir] [-verifyCAstore uri] [-cert filename] [-certform DER|PEM|P12] [-cert_chain filename] [-build_chain] [-CRL filename] [-CRLform DER|PEM] [-crl_download] [-key filename|uri] [-keyform DER|PEM|P12|ENGINE] [-pass arg] [-chainCAfile filename] [-chain- CApath directory] [-chainCAstore uri] [-requestCAfile filename] [-dane_tlsa_domain domain] [-dane_tlsa_rrdata rrdata] [-dane_ee_no_namechecks] [-reconnect] [-showcerts] [-prexit] [-no-interac- tive] [-debug] [-trace] [-nocommands] [-adv] [-security_debug] [-secu- rity_debug_verbose] [-msg] [-timeout] [-mtu size] [-no_ems] [-keymatexport label] [-keymatexportlen len] [-msgfile filename] [-nbio_test] [-state] [-nbio] [-crlf] [-ign_eof] [-no_ign_eof] [-psk_identity identity] [-psk key] [-psk_session file] [-quiet] [-sctp] [-sctp_label_bug] [-fall- back_scsv] [-async] [-maxfraglen len] [-max_send_frag] [-split_send_frag] [-max_pipelines] [-read_buf] [-ignore_unexpected_eof] [-no_tx_cert_comp] [-no_rx_cert_comp] [-brief] [-starttls protocol] [-xmpphost hostname] [-name hostname] [-tlsextdebug] [-sess_out filename] [-sess_in filename] [-serverinfo types] [-status] [-alpn protocols] [-nextprotoneg protocols] [-ct] [-noct] [-ctlogfile] [-keylogfile file] [-early_data file] [-en- able_pha] [-use_srtp value] [-srpuser value] [-srppass value] [-srp_la- teuser] [-srp_moregroups] [-srp_strength number] [-ktls] [-tfo] [-nameopt option] [-no_ssl3] [-no_tls1] [-no_tls1_1] [-no_tls1_2] [-no_tls1_3] [-ssl3] [-tls1] [-tls1_1] [-tls1_2] [-tls1_3] [-dtls] [-dtls1] [-dtls1_2] [-xkey infile] [-xcert file] [-xchain file] [-xchain_build file] [-xcert- form DER|PEM]> [-xkeyform DER|PEM]> [-CAfile file] [-no-CAfile] [-CApath dir] [-no-CApath] [-CAstore uri] [-no-CAstore] [-bugs] [-no_comp] [-comp] [-no_ticket] [-serverpref] [-client_renegotiation] [-legacy_renegotiation] [-no_renegotiation] [-no_resumption_on_reneg] [-legacy_server_connect] [-no_legacy_server_connect] [-no_etm] [-allow_no_dhe_kex] [-pre- fer_no_dhe_kex] [-prioritize_chacha] [-strict] [-sigalgs algs] [-client_sigalgs algs] [-groups groups] [-curves curves] [-named_curve curve] [-cipher ciphers] [-ciphersuites 1.3ciphers] [-min_protocol minprot] [-max_protocol maxprot] [-record_padding padding] [-debug_broken_protocol] [-no_middlebox] [-rand files] [-writerand file] [-provider name] [-provider-path path] [-provparam [name:]key=value] [-propquery propq] [-engine id] [-ssl_client_engine id] [-allow_proxy_certs] [-attime time- stamp] [-no_check_time] [-check_ss_sig] [-crl_check] [-crl_check_all] [-ex- plicit_policy] [-extended_crl] [-ignore_critical] [-inhibit_any] [-in- hibit_map] [-partial_chain] [-policy arg] [-policy_check] [-policy_print] [-purpose purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192] [-trusted_first] [-no_alt_chains] [-use_deltas] [-auth_level num] [-ver- ify_depth num] [-verify_email email] [-verify_hostname hostname] [-ver- ify_ip ip] [-verify_name name] [-x509_strict] [-issuer_checks] [-en- able_server_rpk] [-enable_client_rpk] [host:port] DESCRIPTION This command implements a generic SSL/TLS client which connects to a remote host using SSL/TLS. It is a very useful diagnostic tool for SSL servers. OPTIONS In addition to the options below, this command also supports the common and client only options documented in the "Supported Command Line Commands" section of the SSL_CONF_cmd(3) manual page. -help Print out a usage message. -ssl_config section Use the specified section of the configuration file to configure the SSL_CTX object. -connect host:port This specifies the host and optional port to connect to. It is possible to select the host and port using the optional target positional argu- ment instead. If neither this nor the target positional argument are specified then an attempt is made to connect to the local host on port 4433. If the host string is an IPv6 address, it must be enclosed in "[" and "]". -host hostname Host to connect to; use -connect instead. -port port Connect to the specified port; use -connect instead. -bind host:port This specifies the host address and or port to bind as the source for the connection. For Unix-domain sockets the port is ignored and the host is used as the source socket address. If the host string is an IPv6 address, it must be enclosed in "[" and "]". -proxy host:port When used with the -connect flag, the program uses the host and port specified with this flag and issues an HTTP CONNECT command to connect to the desired server. If the host string is an IPv6 address, it must be enclosed in "[" and "]". -proxy_user userid When used with the -proxy flag, the program will attempt to authenti- cate with the specified proxy using basic (base64) authentication. NB: Basic authentication is insecure; the credentials are sent to the proxy in easily reversible base64 encoding before any TLS/SSL session is es- tablished. Therefore, these credentials are easily recovered by anyone able to sniff/trace the network. Use with caution. -proxy_pass arg The proxy password source, used with the -proxy_user flag. For more information about the format of arg see openssl-passphrase-options(1). -unix path Connect over the specified Unix-domain socket. -4 Use IPv4 only. -6 Use IPv6 only. -quic Connect using the QUIC protocol. If specified then the -alpn option must also be provided. -servername name Set the TLS SNI (Server Name Indication) extension in the ClientHello message to the given value. If -servername is not provided, the TLS SNI extension will be populated with the name given to -connect if it follows a DNS name format. If -connect is not provided either, the SNI is set to "localhost". This is the default since OpenSSL 1.1.1. Even though SNI should normally be a DNS name and not an IP address, if -servername is provided then that name will be sent, regardless of whether it is a DNS name or not. This option cannot be used in conjunction with -noservername. -noservername Suppresses sending of the SNI (Server Name Indication) extension in the ClientHello message. Cannot be used in conjunction with the -servername or -dane_tlsa_domain options. -cert filename The client certificate to use, if one is requested by the server. The default is not to use a certificate. The chain for the client certificate may be specified using -cert_chain. -certform DER|PEM|P12 The client certificate file format to use; unspecified by default. See openssl-format-options(1) for details. -cert_chain A file or URI of untrusted certificates to use when attempting to build the certificate chain related to the certificate specified via the -cert option. The input can be in PEM, DER, or PKCS#12 format. -build_chain Specify whether the application should build the client certificate chain to be provided to the server. -CRL filename CRL file to use to check the server's certificate. -CRLform DER|PEM The CRL file format; unspecified by default. See openssl-format-op- tions(1) for details. -crl_download Download CRL from distribution points in the certificate. Note that this option is ignored if -crl_check option is not provided. Note that the maximum size of CRL is limited by X509_CRL_load_http(3) function. -key filename|uri The client private key to use. If not specified then the certificate file will be used to read also the key. -keyform DER|PEM|P12|ENGINE The key format; unspecified by default. See openssl-format-options(1) for details. -pass arg the private key and certificate file password source. For more infor- mation about the format of arg see openssl-passphrase-options(1). -verify depth The verify depth to use. This specifies the maximum length of the server certificate chain and turns on server certificate verification. Unless the -verify_return_error option is given, the verify operation continues after errors so all the problems with a certificate chain can be seen. As a side effect the connection will never fail due to a server certificate verify failure. By default, validation of server certificates and their chain is done w.r.t. the (D)TLS Server ("sslserver") purpose. For details see "Cer- tificate Extensions" in openssl-verification-options(1). -verify_return_error Turns on server certificate verification, like with -verify, but re- turns verification errors instead of continuing. This will typically abort the handshake with a fatal error. -verify_quiet Limit verify output to only errors. -verifyCAfile filename A file in PEM format containing trusted certificates to use for verify- ing the server's certificate. -verifyCApath dir A directory containing trusted certificates to use for verifying the server's certificate. This directory must be in "hash format", see openssl-verify(1) for more information. -verifyCAstore uri The URI of a store containing trusted certificates to use for verifying the server's certificate. -chainCAfile file A file in PEM format containing trusted certificates to use when at- tempting to build the client certificate chain. -chainCApath directory A directory containing trusted certificates to use for building the client certificate chain provided to the server. This directory must be in "hash format", see openssl-verify(1) for more information. -chainCAstore uri The URI of a store containing trusted certificates to use when attempt- ing to build the client certificate chain. The URI may indicate a sin- gle certificate, as well as a collection of them. With URIs in the "file:" scheme, this acts as -chainCAfile or -chainCApath, depending on if the URI indicates a directory or a single file. See ossl_store-file(7) for more information on the "file:" scheme. -requestCAfile file A file containing a list of certificates whose subject names will be sent to the server in the certificate_authorities extension. Only sup- ported for TLS 1.3 -dane_tlsa_domain domain Enable RFC6698/RFC7671 DANE TLSA authentication and specify the TLSA base domain which becomes the default SNI hint and the primary refer- ence identifier for hostname checks. This must be used in combination with at least one instance of the -dane_tlsa_rrdata option below. When DANE authentication succeeds, the diagnostic output will include the lowest (closest to 0) depth at which a TLSA record authenticated a chain certificate. When that TLSA record is a "2 1 0" trust anchor public key that signed (rather than matched) the top-most certificate of the chain, the result is reported as "TA public key verified". Oth- erwise, either the TLSA record "matched TA certificate" at a positive depth or else "matched EE certificate" at depth 0. -dane_tlsa_rrdata rrdata Use one or more times to specify the RRDATA fields of the DANE TLSA RRset associated with the target service. The rrdata value is speci- fied in "presentation form", that is four whitespace separated fields that specify the usage, selector, matching type and associated data, with the last of these encoded in hexadecimal. Optional whitespace is ignored in the associated data field. For example: $ openssl s_client -brief -starttls smtp \ -connect smtp.example.com:25 \ -dane_tlsa_domain smtp.example.com \ -dane_tlsa_rrdata "2 1 1 B111DD8A1C2091A89BD4FD60C57F0716CCE50FEEFF8137CDBEE0326E 02CF362B" \ -dane_tlsa_rrdata "2 1 1 60B87575447DCBA2A36B7D11AC09FB24A9DB406FEE12D2CC90180517 616E8A18" ... Verification: OK Verified peername: smtp.example.com DANE TLSA 2 1 1 ...ee12d2cc90180517616e8a18 matched TA certificate at depth 1 ... -dane_ee_no_namechecks This disables server name checks when authenticating via DANE-EE(3) TLSA records. For some applications, primarily web browsers, it is not safe to disable name checks due to "unknown key share" attacks, in which a malicious server can convince a client that a connection to a victim server is instead a secure connection to the malicious server. The malicious server may then be able to violate cross-origin scripting restrictions. Thus, despite the text of RFC7671, name checks are by default enabled for DANE-EE(3) TLSA records, and can be disabled in ap- plications where it is safe to do so. In particular, SMTP and XMPP clients should set this option as SRV and MX records already make it possible for a remote domain to redirect client connections to any server of its choice, and in any case SMTP and XMPP clients do not exe- cute scripts downloaded from remote servers. -reconnect Reconnects to the same server 5 times using the same session ID, this can be used as a test that session caching is working. -showcerts Displays the server certificate list as sent by the server: it only consists of certificates the server has sent (in the order the server has sent them). It is not a verified chain. -prexit Print session information when the program exits. This will always at- tempt to print out information even if the connection fails. Normally information will only be printed out once if the connection succeeds. This option is useful because the cipher in use may be renegotiated or the connection may fail because a client certificate is required or is requested only after an attempt is made to access a certain URL. Note: the output produced by this option is not always accurate because a connection might never have been established. -no-interactive This flag can be used to run the client in a non-interactive mode. -state Prints out the SSL session states. -debug Print extensive debugging information including a hex dump of all traf- fic. -nocommands Do not use interactive command letters. -advUse advanced command mode. -security_debug Enable security debug messages. -security_debug_verbose Output more security debug output. -msgShow protocol messages. -timeout Enable send/receive timeout on DTLS connections. -mtu size Set MTU of the link layer to the specified size. -no_ems Disable Extended master secret negotiation. -keymatexport label Export keying material using the specified label. -keymatexportlen len Export the specified number of bytes of keying material; default is 20. Show all protocol messages with hex dump. -trace Show verbose trace output of protocol messages. -msgfile filename File to send output of -msg or -trace to, default standard output. -nbio_test Tests nonblocking I/O -nbio Turns on nonblocking I/O -crlf This option translated a line feed from the terminal into CR+LF as re- quired by some servers. -ign_eof Inhibit shutting down the connection when end of file is reached in the input. This implicitly turns on -nocommands as well. -quiet Inhibit printing of session and certificate information. This implic- itly turns on -ign_eof and -nocommands as well. -no_ign_eof Shut down the connection when end of file is reached in the input. Can be used to override the implicit -ign_eof after -quiet. -psk_identity identity Use the PSK identity identity when using a PSK cipher suite. The de- fault value is "Client_identity" (without the quotes). -psk key Use the PSK key key when using a PSK cipher suite. The key is given as a hexadecimal number without leading 0x, for example -psk 1a2b3c4d. This option must be provided in order to use a PSK cipher. -psk_session file Use the pem encoded SSL_SESSION data stored in file as the basis of a PSK. Note that this will only work if TLSv1.3 is negotiated. -sctp Use SCTP for the transport protocol instead of UDP in DTLS. Must be used in conjunction with -dtls, -dtls1 or -dtls1_2. This option is only available where OpenSSL has support for SCTP enabled. -sctp_label_bug Use the incorrect behaviour of older OpenSSL implementations when com- puting endpoint-pair shared secrets for DTLS/SCTP. This allows communi- cation with older broken implementations but breaks interoperability with correct implementations. Must be used in conjunction with -sctp. This option is only available where OpenSSL has support for SCTP en- abled. -fallback_scsv Send TLS_FALLBACK_SCSV in the ClientHello. -async Switch on asynchronous mode. Cryptographic operations will be performed asynchronously. This will only have an effect if an asynchronous capa- ble engine is also used via the -engine option. For test purposes the dummy async engine (dasync) can be used (if available). -maxfraglen len Enable Maximum Fragment Length Negotiation; allowed values are 512, 1024, 2048, and 4096. -max_send_frag int The maximum size of data fragment to send. See SSL_CTX_set_max_send_fragment(3) for further information. -split_send_frag int The size used to split data for encrypt pipelines. If more data is written in one go than this value then it will be split into multiple pipelines, up to the maximum number of pipelines defined by max_pipelines. This only has an effect if a suitable cipher suite has been negotiated, an engine that supports pipelining has been loaded, and max_pipelines is greater than 1. See SSL_CTX_set_split_send_frag- ment(3) for further information. -max_pipelines int The maximum number of encrypt/decrypt pipelines to be used. This will only have an effect if an engine has been loaded that supports pipelin- ing (e.g. the dasync engine) and a suitable cipher suite has been nego- tiated. The default value is 1. See SSL_CTX_set_max_pipelines(3) for further information. -read_buf int The default read buffer size to be used for connections. This will only have an effect if the buffer size is larger than the size that would otherwise be used and pipelining is in use (see SSL_CTX_set_de- fault_read_buffer_len(3) for further information). -ignore_unexpected_eof Some TLS implementations do not send the mandatory close_notify alert on shutdown. If the application tries to wait for the close_notify alert but the peer closes the connection without sending it, an error is generated. When this option is enabled the peer does not need to send the close_notify alert and a closed connection will be treated as if the close_notify alert was received. For more information on shut- ting down a connection, see SSL_shutdown(3). -no_tx_cert_comp Disables support for sending TLSv1.3 compressed certificates. -no_rx_cert_comp Disables support for receiving TLSv1.3 compressed certificate. -brief Only provide a brief summary of connection parameters instead of the normal verbose output. -starttls protocol Send the protocol-specific message(s) to switch to TLS for communica- tion. protocol is a keyword for the intended protocol. Currently, the only supported keywords are "smtp", "pop3", "imap", "ftp", "xmpp", "xmpp-server", "irc", "postgres", "mysql", "lmtp", "nntp", "sieve" and "ldap". -xmpphost hostname This option, when used with "-starttls xmpp" or "-starttls xmpp-server", specifies the host for the "to" attribute of the stream element. If this option is not specified, then the host specified with "-connect" will be used. This option is an alias of the -name option for "xmpp" and "xmpp-server". -name hostname This option is used to specify hostname information for various proto- cols used with -starttls option. Currently only "xmpp", "xmpp-server", "smtp" and "lmtp" can utilize this -name option. If this option is used with "-starttls xmpp" or "-starttls xmpp-server", if specifies the host for the "to" attribute of the stream element. If this option is not specified, then the host speci- fied with "-connect" will be used. If this option is used with "-starttls lmtp" or "-starttls smtp", it specifies the name to use in the "LMTP LHLO" or "SMTP EHLO" message, respectively. If this option is not specified, then "mail.example.com" will be used. -tlsextdebug Print out a hex dump of any TLS extensions received from the server. -sess_out filename Output SSL session to filename. -sess_in filename Load SSL session from filename. The client will attempt to resume a connection from this session. -serverinfo types A list of comma-separated TLS Extension Types (numbers between 0 and 65535). Each type will be sent as an empty ClientHello TLS Extension. The server's response (if any) will be encoded and displayed as a PEM file. -status Sends a certificate status request to the server (OCSP stapling). The server response (if any) is printed out. -alpn protocols, -nextprotoneg protocols These flags enable the Enable the Application-Layer Protocol Negotia- tion or Next Protocol Negotiation (NPN) extension, respectively. ALPN is the IETF standard and replaces NPN. The protocols list is a comma-separated list of protocol names that the client should advertise support for. The list should contain the most desirable protocols first. Protocol names are printable ASCII strings, for example "http/1.1" or "spdy/3". An empty list of protocols is treated spe- cially and will cause the client to advertise support for the TLS ex- tension but disconnect just after receiving ServerHello with a list of server supported protocols. The flag -nextprotoneg cannot be specified if -tls1_3 is used. -ct, -noct Use one of these two options to control whether Certificate Trans- parency (CT) is enabled (-ct) or disabled (-noct). If CT is enabled, signed certificate timestamps (SCTs) will be requested from the server and reported at handshake completion. Enabling CT also enables OCSP stapling, as this is one possible deliv- ery method for SCTs. -ctlogfile A file containing a list of known Certificate Transparency logs. See SSL_CTX_set_ctlog_list_file(3) for the expected file format. -keylogfile file Appends TLS secrets to the specified keylog file such that external programs (like Wireshark) can decrypt TLS connections. -early_data file Reads the contents of the specified file and attempts to send it as early data to the server. This will only work with resumed sessions that support early data and when the server accepts the early data. -enable_pha For TLSv1.3 only, send the Post-Handshake Authentication extension. This will happen whether or not a certificate has been provided via -cert. -use_srtp value Offer SRTP key management, where value is a colon-separated profile list. -srpuser value Set the SRP username to the specified value. This option is deprecated. -srppass value Set the SRP password to the specified value. This option is deprecated. -srp_lateuser SRP username for the second ClientHello message. This option is depre- cated. -srp_moregroups This option is deprecated. Tolerate other than the known g and N values. -srp_strength number Set the minimal acceptable length, in bits, for N. This option is dep- recated. -ktls Enable Kernel TLS for sending and receiving. This option was intro- duced in OpenSSL 3.2.0. Kernel TLS is off by default as of OpenSSL 3.2.0. -tfoEnable creation of connections via TCP fast open (RFC7413). -no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2, -no_tls1_3, -ssl3, -tls1, -tls1_1, -tls1_2, -tls1_3 See "TLS Version Options" in openssl(1). -dtls, -dtls1, -dtls1_2 These specify the use of DTLS instead of TLS. See "TLS Version Op- tions" in openssl(1). -nameopt option This specifies how the subject or issuer names are displayed. See openssl-namedisplay-options(1) for details. -xkey infile, -xcert file, -xchain file, -xchain_build file, -xcertform DER|PEM, -xkeyform DER|PEM Set extended certificate verification options. See "Extended Verifica- tion Options" in openssl-verification-options(1) for details. -CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri, -no-CAs- tore See "Trusted Certificate Options" in openssl-verification-options(1) for details. -bugs, -comp, -no_comp, -no_ticket, -serverpref, -client_renegotiation, -legacy_renegotiation, -no_renegotiation, -no_resumption_on_reneg, -legacy_server_connect, -no_legacy_server_connect, -no_etm -al- low_no_dhe_kex, -prefer_no_dhe_kex, -prioritize_chacha, -strict, -sigalgs algs, -client_sigalgs algs, -groups groups, -curves curves, -named_curve curve, -cipher ciphers, -ciphersuites 1.3ciphers, -min_protocol minprot, -max_protocol maxprot, -record_padding padding, -debug_broken_protocol, -no_middlebox See "SUPPORTED COMMAND LINE COMMANDS" in SSL_CONF_cmd(3) for details. -rand files, -writerand file See "Random State Options" in openssl(1) for details. -provider name -provider-path path -provparam [name:]key=value -propquery propq See "Provider Options" in openssl(1), provider(7), and property(7). -engine id See "Engine Options" in openssl(1). This option is deprecated. -ssl_client_engine id Specify engine to be used for client certificate operations. -allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check, -crl_check_all, -explicit_policy, -extended_crl, -ignore_critical, -in- hibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy, -pol- icy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only, -suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth, -ver- ify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict -is- suer_checks Set various options of certificate chain verification. See "Verifica- tion Options" in openssl-verification-options(1) for details. Verification errors are displayed, for debugging, but the command will proceed unless the -verify_return_error option is used. -enable_server_rpk Enable support for receiving raw public keys (RFC7250) from the server. Use of X.509 certificates by the server becomes optional, and servers that support raw public keys may elect to use them. Servers that don't support raw public keys or prefer to use X.509 certificates can still elect to send X.509 certificates as usual. -enable_client_rpk Enable support for sending raw public keys (RFC7250) to the server. A raw public key will be sent by the client, if solicited by the server, provided a suitable key and public certificate pair is configured. Some servers may nevertheless not request any client credentials, or may request a certificate. host:port Rather than providing -connect, the target host and optional port may be provided as a single positional argument after all options. If nei- ther this nor -connect are provided, falls back to attempting to con- nect to localhost on port 4433. If the host string is an IPv6 address, it must be enclosed in "[" and "]". CONNECTED COMMANDS (BASIC) If a connection is established with an SSL/TLS server then any data re- ceived from the server is displayed and any key presses will be sent to the server. If end of file is reached then the connection will be closed down. When used interactively (which means neither -quiet nor -ign_eof have been given), and neither of -adv or -nocommands are given then "Basic" command mode is entered. In this mode certain commands are recognized which perform special operations. These commands are a letter which must appear at the start of a line. All further data after the initial letter on the line is ignored. The commands are listed below. Q End the current SSL connection and exit. R Renegotiate the SSL session (TLSv1.2 and below only). C Attempt to reconnect to the server using a resumption handshake. k Send a key update message to the server (TLSv1.3 only) K Send a key update message to the server and request one back (TLSv1.3 only) CONNECTED COMMANDS (ADVANCED) If -adv has been given then "advanced" command mode is entered. As with ba- sic mode, if a connection is established with an SSL/TLS server then any data received from the server is displayed and any key presses will be sent to the server. If end of file is reached then the connection will be closed down. Special commands can be supplied by enclosing them in braces, e.g. "{help}" or "{quit}". These commands can appear anywhere in the text entered into s_client, but they are not sent to the server. Some commands can take an argument by ending the command name with ":" and then providing the argu- ment, e.g. "{keyup:req}". Some commands are only available when certain protocol versions have been negotiated. If a newline appears at the end of a line entered into s_client then this is also sent to the server. If a command appears on a line on its own with no other text on the same line, then the newline is suppressed and not sent to the server. The following commands are recognised. helpPrints out summary help text about the available commands. quitClose the connection to the peer reconnect Reconnect to the peer and attempt a resumption handshake keyup Send a Key Update message. TLSv1.3 only. This command takes an optional argument. If the argument "req" is supplied then the peer is also re- quested to update its keys. Otherwise if "noreq" is supplied the peer is not requested to update its keys. The default is "req". reneg Initiate a renegotiation with the server. (D)TLSv1.2 or below only. fin Indicate FIN on the current stream. QUIC only. Once FIN has been sent any further text entered for this stream is ignored. NOTES This command can be used to debug SSL servers. To connect to an SSL HTTP server the command: openssl s_client -connect servername:443 would typically be used (https uses port 443). If the connection succeeds then an HTTP command can be given such as "GET /" to retrieve a web page. If the handshake fails then there are several possible causes, if it is nothing obvious like no client certificate then the -bugs, -ssl3, -tls1, -no_ssl3, -no_tls1 options can be tried in case it is a buggy server. In particular you should play with these options before submitting a bug re- port to an OpenSSL mailing list. A frequent problem when attempting to get client certificates working is that a web client complains it has no certificates or gives an empty list to choose from. This is normally because the server is not sending the clients certificate authority in its "acceptable CA list" when it requests a certificate. By using this command, the CA list can be viewed and checked. However, some servers only request client authentication after a specific URL is requested. To obtain the list in this case it is necessary to use the -prexit option and send an HTTP request for an appropriate page. If a certificate is specified on the command line using the -cert option it will not be used unless the server specifically requests a client certifi- cate. Therefore, merely including a client certificate on the command line is no guarantee that the certificate works. If there are problems verifying a server certificate then the -showcerts option can be used to show all the certificates sent by the server. This command is a test tool and is designed to continue the handshake after any certificate verification errors. As a result it will accept any cer- tificate chain (trusted or not) sent by the peer. Non-test applications should not do this as it makes them vulnerable to a MITM attack. This be- haviour can be changed by with the -verify_return_error option: any verify errors are then returned aborting the handshake. The -bind option may be useful if the server or a firewall requires connec- tions to come from some particular address and or port. Note on Non-Interactive Use When s_client is run in a non-interactive environment (e.g., a cron job or a script without a valid stdin), it may close the connection prematurely, especially with TLS 1.3. To prevent this, you can use the -ign_eof flag, which keeps s_client running even after reaching EOF from stdin. For example: openssl s_client -connect <server address>:443 -tls1_3 -sess_out /path/to/tls_session_params_file -ign_eof </dev/null However, relying solely on -ign_eof can lead to issues if the server keeps the connection open, expecting the client to close first. In such cases, the client may hang indefinitely. This behavior is not uncommon, particu- larly with protocols where the server waits for a graceful disconnect from the client. For example, when connecting to an SMTP server, the session may pause if the server expects a QUIT command before closing: $ openssl s_client -brief -ign_eof -starttls smtp -connect <server address>:25 </dev/null CONNECTION ESTABLISHED Protocol version: TLSv1.3 Ciphersuite: TLS_AES_256_GCM_SHA384 ... 250 CHUNKING [long pause] To avoid such hangs, it's better to use an application-level command to initiate a clean disconnect. For SMTP, you can send a QUIT command: printf 'QUIT\r\n' | openssl s_client -connect <server address>:25 -starttls smtp -brief -ign_eof Similarly, for HTTP/1.1 connections, including a `Connection: close` header ensures the server closes the connection after responding: printf 'GET / HTTP/1.1\r\nHost: <server address>\r\nConnection: close\r\n\r\n' | openssl s_client -connect <server address>:443 -brief These approaches help manage the connection closure gracefully and prevent hangs caused by the server waiting for the client to initiate the discon- nect. BUGS Because this program has a lot of options and also because some of the techniques used are rather old, the C source for this command is rather hard to read and not a model of how things should be done. A typical SSL client program would be much simpler. The -prexit option is a bit of a hack. We should really report information whenever a session is renegotiated. SEE ALSO openssl(1), openssl-sess_id(1), openssl-s_server(1), openssl-ciphers(1), SSL_CONF_cmd(3), SSL_CTX_set_max_send_fragment(3), SSL_CTX_set_split_send_fragment(3), SSL_CTX_set_max_pipelines(3), ossl_store-file(7) HISTORY The -no_alt_chains option was added in OpenSSL 1.1.0. The -name option was added in OpenSSL 1.1.1. The -certform option has become obsolete in OpenSSL 3.0.0 and has no ef- fect. The -engine option was deprecated in OpenSSL 3.0. The -enable_client_rpk, -enable_server_rpk, -no_rx_cert_comp, -no_tx_cert_comp, and -tfo options were added in OpenSSL 3.2. COPYRIGHT Copyright 2000-2025 The OpenSSL Project Authors. All Rights Reserved. Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>. 3.5.6 2026-04-07 OPENSSL-S_CLIENT(1ossl)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONNECTED COMMANDS (BASIC) | CONNECTED COMMANDS (ADVANCED) | NOTES | BUGS | SEE ALSO | HISTORY | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=openssl-s_client&sektion=1&manpath=FreeBSD+15.1-RELEASE+and+Ports>