FreeBSD Manual Pages
PRINTF(1) General Commands Manual PRINTF(1) NAME printf -- formatted output SYNOPSIS printf format [arguments ...] DESCRIPTION The printf utility formats and prints its arguments, after the first, under control of the format. The format is a character string which contains three types of objects: plain characters, which are simply copied to stan- dard output, character escape sequences which are converted and copied to the standard output, and format specifications, each of which causes print- ing of the next successive argument. The arguments after the first are treated as strings if the corresponding format is either c, b or s; otherwise it is evaluated as a C constant, with the following extensions: * A leading plus or minus sign is allowed. * If the leading character is a single or double quote, the value is the character code of the next character. The format string is reused as often as necessary to satisfy the arguments. Any extra format specifications are evaluated with zero or the null string. Character escape sequences are in backslash notation as defined in the ANSI X3.159-1989 ("ANSI C89"), with extensions. The characters and their mean- ings are as follows: \a Write a <bell> character. \b Write a <backspace> character. \f Write a <form-feed> character. \n Write a <new-line> character. \r Write a <carriage return> character. \t Write a <tab> character. \v Write a <vertical tab> character. \' Write a <single quote> character. \\ Write a backslash character. \num Write a byte whose value is the 1-, 2-, or 3-digit octal num- ber num. Multibyte characters can be constructed using mul- tiple \num sequences. Each format specification is introduced by the percent character (``%''). The remainder of the format specification includes, in the following order: Zero or more of the following flags: # A `#' character specifying that the value should be printed in an ``alternate form''. For b, c, d, s and u formats, this option has no effect. For the o formats the precision of the number is increased to force the first character of the output string to a zero. For the x (X) format, a non- zero result has the string 0x (0X) prepended to it. For a, A, e, E, f, F, g and G formats, the result will always con- tain a decimal point, even if no digits follow the point (normally, a decimal point only appears in the results of those formats if a digit follows the decimal point). For g and G formats, trailing zeros are not removed from the re- sult as they would otherwise be; - A minus sign `-' which specifies left adjustment of the output in the indicated field; + A `+' character specifying that there should always be a sign placed before the number when using signed formats. ` ' A space specifying that a blank should be left before a positive number for a signed format. A `+' overrides a space if both are used; 0 A zero `0' character indicating that zero-padding should be used rather than blank-padding. A `-' overrides a `0' if both are used; Field Width: An optional digit string specifying a field width; if the output string has fewer bytes than the field width it will be blank-padded on the left (or right, if the left-adjustment indicator has been given) to make up the field width (note that a leading zero is a flag, but an embedded zero is part of a field width); Precision: An optional period, `.', followed by an optional digit string giv- ing a precision which specifies the number of digits to appear af- ter the decimal point, for e and f formats, or the maximum number of bytes to be printed from a string; if the digit string is miss- ing, the precision is treated as zero; Format: A character which indicates the type of format to use (one of diouxXfFeEgGaAcsb). The uppercase formats differ from their lower- case counterparts only in that the output of the former is entirely in uppercase. The floating-point format specifiers (fFeEgGaA) may be prefixed by an L to request that additional precision be used, if available. A field width or precision may be `*' instead of a digit string. In this case an argument supplies the field width or precision. The format characters and their meanings are: diouXx The argument is printed as a signed decimal (d or i), unsigned octal, unsigned decimal, or unsigned hexadecimal (X or x), re- spectively. fF The argument is printed in the style `[-]ddd.ddd' where the number of d's after the decimal point is equal to the precision specification for the argument. If the precision is missing, 6 digits are given; if the precision is explicitly 0, no digits and no decimal point are printed. The values infinity and NaN are printed as `inf' and `nan', respectively. eE The argument is printed in the style e `[-d.ddd+/-dd]' where there is one digit before the decimal point and the number af- ter is equal to the precision specification for the argument; when the precision is missing, 6 digits are produced. The val- ues infinity and NaN are printed as `inf' and `nan', respec- tively. gG The argument is printed in style f (F) or in style e (E) whichever gives full precision in minimum space. aA The argument is printed in style `[-h.hhh+/-pd]' where there is one digit before the hexadecimal point and the number after is equal to the precision specification for the argument; when the precision is missing, enough digits are produced to convey the argument's exact double-precision floating-point representa- tion. The values infinity and NaN are printed as `inf' and `nan', respectively. c The first byte of argument is printed. s Bytes from the string argument are printed until the end is reached or until the number of bytes indicated by the precision specification is reached; however if the precision is 0 or missing, the string is printed entirely. b As for s, but interpret character escapes in backslash notation in the string argument. The permitted escape sequences are slightly different in that octal escapes are \0num instead of \num and that an additional escape sequence \c stops further output from this printf invocation. n$ Allows reordering of the output according to argument. % Print a `%'; no argument is used. The decimal point character is defined in the program's locale (category LC_NUMERIC). In no case does a non-existent or small field width cause truncation of a field; padding takes place only if the specified field width exceeds the actual width. Some shells may provide a builtin printf command which is similar or iden- tical to this utility. Consult the builtin(1) manual page. EXIT STATUS The printf utility exits 0 on success, and >0 if an error occurs. EXAMPLES Print the string "hello": $ printf "%s\n" hello hello Same as above, but notice that the format string is not quoted and hence we do not get the expected behavior: $ printf %s\n hello hellon$ Print arguments forcing sign only for the first argument: $ printf "%+d\n%d\n%d\n" 1 -2 13 +1 -2 13 Same as above, but the single format string will be applied to the three arguments: $ printf "%+d\n" 1 -2 13 +1 -2 +13 Print number using only two digits after the decimal point: $ printf "%.2f\n" 31.7456 31.75 COMPATIBILITY The traditional BSD behavior of converting arguments of numeric formats not beginning with a digit to the ASCII code of the first character is not sup- ported. SEE ALSO builtin(1), echo(1), sh(1), printf(3) STANDARDS The printf command is expected to be compatible with the IEEE Std 1003.2 ("POSIX.2") specification. HISTORY The printf command appeared in 4.3BSD-Reno. It is modeled after the stan- dard library function, printf(3). CAVEATS ANSI hexadecimal character constants were deliberately not provided. Trying to print a dash ("-") as the first character causes printf to inter- pret the dash as a program argument. -- must be used before format. If the locale contains multibyte characters (such as UTF-8), the c format and b and s formats with a precision may not operate as expected. BUGS Since the floating point numbers are translated from ASCII to floating- point and then back again, floating-point precision may be lost. (By de- fault, the number is translated to an IEEE-754 double-precision value be- fore being printed. The L modifier may produce additional precision, de- pending on the hardware platform.) The escape sequence \000 is the string terminator. When present in the ar- gument for the b format, the argument will be truncated at the \000 charac- ter. Multibyte characters are not recognized in format strings (this is only a problem if `%' can appear inside a multibyte character). FreeBSD ports 15.1 July 1, 2020 PRINTF(1)
NAME | SYNOPSIS | DESCRIPTION | EXIT STATUS | EXAMPLES | COMPATIBILITY | SEE ALSO | STANDARDS | HISTORY | CAVEATS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=printf&sektion=1&manpath=FreeBSD+15.1-RELEASE+and+Ports>