FreeBSD Manual Pages
tput(1) User commands tput(1) NAME tput - initialize a terminal, exercise its capabilities, or query term- info database SYNOPSIS tput [-T terminal-type] {cap-code [parameter ...]} ... tput [-T terminal-type] [-x] clear tput [-T terminal-type] init tput [-T terminal-type] reset tput [-T terminal-type] longname tput -S tput -V DESCRIPTION tput uses the terminfo library and database to make terminal-specific capabilities and information available to the shell, to initialize or reset the terminal, or to report a description of the current (or spec- ified) terminal type. Terminal capabilities are accessed by cap-code. terminfo(5) discusses terminal capabilities at length and presents a complete list of cap-codes. When retrieving capability values, the result depends upon the capabil- ity's type. Boolean tput sets its exit status to 0 if the terminal possesses cap- code, and 1 if it does not. numeric tput writes cap-code's decimal value to the standard output stream if defined (-1 if it is not) followed by a newline. string tput writes cap-code's value to the standard output stream if defined, without a trailing newline. Before using a value returned on the standard output, the application should test tput's exit status to be sure it is 0; see section "EXIT STATUS" below. Operands Generally, an operand is a cap-code, a capability code from the termi- nal database, or a parameter thereto. Three others are specially rec- ognized by tput: init, reset, and longname. Although these resemble capability codes, they in fact receive special handling; we term them "pseudo-capabilities". cap-code indicates a capability from the terminal database. If cap-code is of string type and takes parameters, tput in- terprets arguments following cap-code as the parameters, up to the (fixed) quantity the capability requires. Most parameters are numeric. Only a few terminal capabili- ties require string parameters; tput uses a table to decide which to pass as strings. Normally tput uses tparm(3X) to perform the substitution. If no parameters are given for the capability, tput writes the string without performing the substitution. init initializes the terminal. If the terminal database is present and an entry for the user's terminal type exists, the following occur. (1) tput retrieves the terminal's mode settings. It suc- cessively tests the file descriptors corresponding to • the standard error stream, • the standard output stream, • the standard input stream, and • /dev/tty to obtain terminal settings. Having retrieved them, tput remembers which descriptor to use for further up- dates. (2) If the terminal dimensions cannot be obtained from the operating system, but the environment or terminal type database entry describes them, tput updates the operat- ing system's notion of them. (3) tput updates the terminal modes. • Any delays specified in the entry (for example, when a newline is sent) are set in the terminal driver. • Tab expansion is turned on or off per the specifi- cation in the entry, and • if tabs are not expanded, standard tabs (every 8 spaces) are set. (4) If initialization capabilities, detailed in subsection "Tabs and Initialization" of terminfo(5), are present, tput writes them to the standard output stream. (5) tput flushes the standard output stream. If an entry lacks the information needed for an activity above, that activity is silently skipped. reset re-initializes the terminal. A reset differs from initial- ization in two ways. (1) tput sets the the terminal modes to a "sane" state, • enabling cooked and echo modes, • disabling cbreak and raw modes, • enabling newline translation, and • setting any unset special characters to their de- fault values. (2) If any reset capabilities are defined for the terminal type, tput writes them to the output stream. Other- wise, tput uses any defined initialization capabili- ties. Reset capabilities are detailed in subsection "Tabs and Initialization" of terminfo(5). longname A terminfo entry begins with one or more names by which an application can refer to the entry, before the list of ter- minal capabilities. The names are separated by "|" charac- ters. X/Open Curses terms the last name the "long name", and indicates that it may include blanks. tic warns if the last name does not include blanks, to ac- commodate old terminfo entries that treated the long name as an optional feature. The long name is often referred to as the description field. If the terminal database is present and an entry for the user's terminal type exists, tput reports its description to the standard output stream, without a trailing newline. See terminfo(5). Note: Redirecting the output of "tput init" or "tput reset" to a file will capture only part of their actions. Changes to the terminal modes are not affected by file descriptor redirection, since the terminal modes are altered via ioctl(2). Aliases If tput is invoked via link with any of the names clear, init, or reset, it operates as if run with the corresponding (pseudo-)capability operand. For example, executing a link named reset that points to tput has the same effect as "tput reset". This feature was introduced by ncurses 5.2 in 2000. It is rarely used: clear is a separate program, which is both smaller and more frequently executed. init has the same name as another program in widespread use. reset is provided by the tset(1) utility (also via a link named reset). Terminal Size Besides the pseudo-capabilities (such as init), tput treats the lines and cols cap-codes specially: it may call setupterm(3X) to obtain the terminal size. • First, tput attempts to obtain these capabilities from the terminal database. This generally fails for terminal emulators, which lack a fixed window size and thus omit the capabilities. • It then asks the operating system for the terminal's size, which generally works, unless the connection is via a serial line that does not support "NAWS": negotiations about window size. • Finally, it inspects the environment variables LINES and COLUMNS, which may override the terminal size. If the -T option is given, tput ignores the environment variables by calling use_tioctl(TRUE), relying upon the operating system (or, ulti- mately, the terminal database). OPTIONS -S retrieves more than one capability per invocation of tput. The capabilities must be passed to tput from the standard in- put stream instead of from the command line (see section "EX- AMPLES" below). Only one cap-code is allowed per line. The -S option changes the meanings of the 0 and 1 exit statuses (see section "EXIT STATUS" below). Some capabilities use string parameters rather than numeric ones. tput employs a built-in table and the presence of para- meters in its input to decide how to interpret them, and whether to use tparm(3X). -T type indicates the terminal's type. Normally this option is unnec- essary, because a default is taken from the TERM environment variable. If specified, the environment variables LINES and COLUMNS are also ignored. -V reports the version of ncurses associated with tput, and exits with a successful status. -x prevents "tput clear" from attempting to clear the scrollback buffer. EXIT STATUS Normally, one should interpret tput's exit statuses as follows. Status Meaning When -S Not Specified ------------------------------------------------------------------------ 0 Boolean or string capability present 1 Boolean or numeric capability absent 2 usage error or no terminal type specified 3 unrecognized terminal type 4 unrecognized capability code >4 system error (4 + errno) When the -S option is used, some statuses change meanings. Status Meaning When -S Specified ------------------------------------------------------------------------ 0 all operands interpreted 1 unused 4 some operands not interpreted ENVIRONMENT tput reads one environment variable. TERM denotes the terminal type. Each terminal type is distinct, though many are similar. The -T option overrides its value. FILES /usr/share/tabset tab stop initialization database /usr/share/misc/terminfo compiled terminal description database PORTABILITY Over time ncurses tput has differed from that of System V in two impor- tant respects, one now mostly historical. • "tput cap-code" writes to the standard output, which need not be a terminal device. However, the operands that manipulate terminal modes might not use the standard output. System V tput's init and reset operands use logic from 4.1cBSD tset, manipulating terminal modes. It checks the same file de- scriptors (and /dev/tty) for association with a terminal device as ncurses now does, and if none are, finally assumes a 1200 baud ter- minal. When updating terminal modes, it ignores errors. Until ncurses 6.1 (see section "HISTORY" below), tput did not mod- ify terminal modes. It now employs a scheme similar to System V, using functions shared with tset (and ultimately based on 4.4BSD tset). If it is not able to open a terminal (for instance, when run by cron(1)), tput exits with an error status. • System V tput assumes that the type of a cap-code operand is nu- meric if all the characters of its value are decimal numbers; if they are not, it treats cap-code as a string capability. Most implementations that provide support for cap-code operands use the tparm(3X) function to expand its parameters. That function ex- pects a mixture of numeric and string parameters, requiring tput to know which type to use. ncurses tput uses a table to determine the parameter types for the standard cap-code operands, and an internal function to analyze nonstandard cap-code operands. While more reliable than System V's utility, a portability problem is introduced by this analysis. An OpenBSD developer adapted the internal library function from ncurses to port NetBSD's termcap- based tput to terminfo, and modified it to interpret multiple cap- codes (and parameters) on the command line. Portable applications should not rely upon this feature; ncurses offers it to support ap- plications written specifically for OpenBSD. This implementation, unlike others, accepts both termcap and terminfo cap-codes if termcap support is compiled in. In that case, however, the predefined termcap and terminfo codes have two ambiguities; ncurses assumes the terminfo code. • The cap-code dl means delete_line to termcap but parm_delete_line to terminfo. termcap uses the code DL for parm_delete_line. term- info uses the code dl1 for delete_line. • The cap-code ed means exit_delete_mode to termcap but clr_eos to terminfo. termcap uses the code cd for clr_eos. terminfo uses the code rmdc for exit_delete_mode. The longname operand, -S option, and the parameter-substitution fea- tures used in the cup example below, were not supported in AT&T/USL curses before SVr4 (1989). Later, 4.3BSD-Reno (1990) added support for longname, and in 1994, NetBSD added support for the parameter-substitu- tion features. IEEE Std 1003.1/The Open Group Base Specifications Issue 7 (POSIX.1-2008) documents only the clear, init, and reset operands. A few observations of interest arise from that selection. • ncurses supports clear as it does any other standard cap-code. The others (init and longname) do not correspond to terminal capabili- ties. • The tput on SVr4-based systems such as Solaris, IRIX64, and HP-UX, as well as others such as AIX and Tru64, also support standard cap- code operands. • A few platforms such as FreeBSD recognize termcap codes rather than terminfo capability codes in their respective tput commands. Since 2010, NetBSD's tput uses terminfo codes. Before that, it (like FreeBSD) recognized termcap codes. Beginning in 2021, FreeBSD uses ncurses tput, configured for both terminfo (tested first) and termcap (as a fallback). Because (apparently) all certified Unix systems support the full set of capability codes, the reason for documenting only a few may not be ap- parent. • X/Open Curses Issue 7 documents tput differently, with cap-code and the other features used in this implementation. • That is, there are two standards for tput: POSIX (a subset) and X/Open Curses (the full implementation). POSIX documents a subset to avoid the complication of including X/Open Curses and the termi- nal capability database. • While it is certainly possible to write a tput program without us- ing curses, no system with a curses implementation provides a tput utility that does not also support standard cap-codes. X/Open Curses Issue 7 (2009) is the first version to document utili- ties. However that part of X/Open Curses does not follow existing practice (that is, System V curses behavior). • It assigns exit status 4 to "invalid operand", which may have the same meaning as "unknown capability". For instance, the source code for Solaris xcurses uses the term "invalid" in this case. • It assigns exit status 255 to a numeric variable that is not speci- fied in the terminfo database. That likely is a documentation er- ror, mistaking the "-1" written to the standard output to indicate an absent or cancelled numeric capability for an (unsigned) exit status. The various System V implementations (AIX, HP-UX, Solaris) use the same exit statuses as ncurses. NetBSD curses documents exit statuses that correspond to neither ncurses nor X/Open Curses. HISTORY Bill Joy wrote a tput command during development of 4BSD in October 1980. This initial version only cleared the screen, and did not ship with official distributions. System V developed a different tput command. • SVr2 (1984) provided a rudimentary tput that checked the parameter against each predefined capability and returned the corresponding value. This version of tput did not use tparm(3X) for parameter- ized capabilities. • SVr3 (1987) replaced that with a more extensive program whose sup- port for init and reset operands (more than half the program) in- corporated the reset feature of BSD tset written by Eric Allman. • SVr4 (1989) added color initialization by using the orig_colors (oc) and orig_pair (op) capabilities in its init logic. Keith Bostic refactored BSD tput for shipment in 4.3BSD-Tahoe (1988), then replaced it the next year with a new implementation based on Sys- tem V tput. Bostic's version similarly accepted some parameters named for terminfo (pseudo-)capabilities: clear, init, longname, and reset. However, because he had only termcap available, it accepted termcap codes for other capabilities. Also, Bostic's BSD tput did not modify the terminal modes as the earlier BSD tset had done. At the same time, Bostic added a shell script named "clear" that used tput to clear the screen. Both of these appeared in 4.4BSD, becoming the "modern" BSD implementation of tput. The origin of ncurses tput lies outside both System V and BSD, in Ross Ridge's mytinfo package, published on comp.sources.unix in December 1992. Ridge's program made more sophisticated use of the terminal ca- pabilities than the BSD program. Eric Raymond used that tput program (and other parts of mytinfo) in ncurses in June 1995. Incorporating the portions dealing with terminal capabilities almost without change, Raymond made improvements to the way command-line parameters were han- dled. Before ncurses 6.1 (2018), its tset and tput utilities differed. • tset was more effective, resetting the terminal modes and special characters. • On the other hand, tset's repertoire of terminal capabilities for resetting the terminal was more limited; it had only equivalents of reset_1string (rs1), reset_2string (rs2), and reset_file (rf), and not the tab stop and margin update features of tput. The reset program is traditionally an alias for tset due to its ability to reset terminal modes and special characters. As of ncurses 6.1, the "reset" features of the two programs are (mostly) the same. Two minor differences remain. • The tset program waits one second when resetting, in case the ter- minal happens to be a hardware device. • The two programs write the terminal initialization strings to dif- ferent streams; that is, standard error for tset and standard out- put for tput. EXAMPLES tput init Initialize the terminal according to the type of terminal in the TERM environment variable. If the system does not reliably ini- tialize the terminal upon login, this command can be included in $HOME/.profile after exporting the TERM environment variable. tput -T5620 reset Reset an AT&T 5620 terminal, overriding the terminal type in the TERM environment variable. tput cnorm Set cursor to normal visibility. tput home Move the cursor to row 0, column 0: the upper left corner of the screen, usually known as the "home" cursor position. tput clear Clear the screen: write the clear_screen capability's value to the standard output stream. tput cols Report the number of columns used by the current terminal type. tput -Tadm3a cols Report the number of columns used by an ADM-3A terminal. strong=`tput smso` normal=`tput rmso` Set shell variables to capability values: strong and normal, to begin and end, respectively, stand-out mode for the terminal. One might use these to present a prompt. printf "${strong}Username:${normal} " tput hc Indicate via exit status whether the terminal is a hard copy de- vice. tput cup 23 4 Move the cursor to row 23, column 4. tput cup Report the value of the cursor_address (cup) capability (used for cursor movement), with no parameters substituted. tput longname Report the terminfo database's description of the terminal type specified in the TERM environment variable. tput -S Process multiple capabilities. The -S option can be profitably used with a shell "here document". $ tput -S <<! > clear > cup 10 10 > bold > ! The foregoing clears the screen, moves the cursor to position (10, 10) and turns on bold (extra bright) mode. tput clear cup 10 10 bold Perform the same actions as the foregoing "tput -S" example. SEE ALSO clear(1), stty(1), tabs(1), tset(1), curs_termcap(3X), terminfo(5) ncurses 6.5 2024-04-20 tput(1)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXIT STATUS | ENVIRONMENT | FILES | PORTABILITY | HISTORY | EXAMPLES | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=tput&sektion=1&manpath=FreeBSD+14.3-RELEASE+and+Ports>