Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
UBSA(4) 		     Kernel Interfaces Manual			 UBSA(4)

NAME
     ubsa -- USB support for Belkin serial adapters

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device usb
	   device ucom
	   device ubsa

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   ubsa_load="YES"

DESCRIPTION
     The ubsa driver provides support for the USB-to-RS232 Bridge chip used by a
     variety of serial adapters from Belkin and other vendors.

     The  device  is  accessed	through the ucom(4) driver which makes it behave
     like a tty(4).

HARDWARE
     The ubsa driver supports the following adapters:

     *	 AnyData ADU-500A EV-DO modem
     *	 AnyData ADU-E100A (no EV-DO mode support)
     *	 Belkin F5U103
     *	 Belkin F5U120
     *	 e-Tek Labs Kwik232
     *	 GoHubs GoCOM232
     *	 Peracom single port serial adapter

FILES
     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state devices

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The ubsa driver appeared in FreeBSD 5.0.  The  uplcom(4)  manual  page  was
     adopted  from  NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002 and
     modified for the ubsa driver by Alexander Kabaev <kan@FreeBSD.org> in Octo-
     ber 2002.

AUTHORS
     The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>.

FreeBSD ports 15.1		 April 26, 2017 			 UBSA(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ubsa&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports>

home | help