FreeBSD Manual Pages
WIPE(1) General Commands Manual WIPE(1) NAME wipe - secure file deletion utility SYNOPSIS wipe [-ucwsiIhfFdDnNvVzZrRtTkKaAeE] [-B(count)] [-S(size)] [-C(size)] [-o[size] -O] [-l[0-2]] [-x[1-32] -X] [-p(1-32)] [-b(0-255)] [files] DEFAULT wipe -ZdNTVEAkO -S512 -C4096 -l1 -x1 -p1 DESCRIPTION Wipe is a secure file wiping utility. There are some low level issues that must be taken into consideration. One of these is that there must be some sort of write barrier between passes. Wipe uses fdatasync(2) (or fsync(2)) as a write barrier, or if fsync(2) isn't available, the file is opened with the O_DSYNC or O_SYNC flag. For wipe to be effec- tive, each pass must be completely written. To ensure this, the drive must support some form of a write barrier, write cache flush, or write cache disabling. SCSI supports ordered command tags, has a force media access bit for commands, and write cache can be disable on mode page 8. IDE/ATA drives support write cache flushes and write cache disabling. Unfortunetly, not all drives actually disable write cache when asked to. Those drives are broken. Write caching should always be disabled, unless your system is battery backed and always powers down cleanly. Under linux, the mount option "mand" must be used (see linux/Documenta- tion/mandatory.txt) for mandatory file locks to be enabled. Wipe should make it extremely difficult for all but the most determined person(s) to recover the original plaintext data. Utilities such as PGP and the GNU Privacy Guard provide strong encryption, but encryption is useless if the original plaintext can be recovered. When using PGP and GPG, temporary files that are disk-backed should be stored on an encrypted file system. That way, the plaintext never hits the platters. Wipe is designed for situations where an encrypted file system isn't practical. Wipe uses /dev/urandom, or if unavailable, /dev/random, as a source for entropy. The Mersenne Twister PRNG is used for speed. The MT site is at: http://www.math.keio.ac.jp/~matumoto/emt.html For more information on the secure deletion of magnetic media and solid state storage devices (such as DRAM) see the USENIX article by Peter Gutmann at: http://www.cs.auckland.ac.nz/~pgut001/secure_del.html OPTIONS -h Display help screen. Shows options and what they do. -u usage - shows options -c shows copywrite information -w shows warranty -i interactive - prompt whether to remove each file explicitly checks file permissions -I disables interaction -f forces file wiping and suppresses permission warnings -r or -R recursion - traverse subdirectories -s silent - disable percent reporting and some warnings -V verbose - shows percentage if file size is above a certain limit (see wipe -h) -v force verbose - always show percentage -e and -E on (-e) makes the percentage (only if shown) more accurate by calling fdatasync() before each update off (-E) will be slightly less accurate, but wipe will only call fdatasync() between passes -d and -D delete (-d) or keep (-D) after wiping -n and -N delete (-n) or skip (-N) fifos, sockets, sym links, and char de- vices -k and -K lock (-k) or don't lock (-K) files during wiping -z zero-out file - performs a single pass of zeros -Z perform normal passes - overrides -z -t and -T enable (-t) or disable (-T) static passes -a and -A write until out of space (-a) or don't (-A) -o and -O write [size] to stdout (-o) or use files (-O) Since wipe does not have specific support for char devs, like it does for block devs, this is the preferred method of wiping them, such as tape drives; eg, wipe -za -o | buffer > /dev/nst0 It can also be used for block devs; eg wipe -To | dd count=size of=blkdev You can also use this to create files containing pseudo-random output from the MT PRNG; eg, wipe -To10240 -x1 > prand For static passes, you must specify a stdout length. -B override block device sector count -S override block device sector size -C chunk size - the maximum file buffer size -l sets generic security level level 0, the PRNG is only seeded once level 1, the PRNG is seeded once per file level 2, the PRNG is seeded once per random pass -x enables random passes and optionally, how many random passes to perform - note that this option now sets the number of random passes per wipe loop - in other words, the total number of ran- dom passes will be random passes * wipe loops (-p) -X disable random passes -p loop passes - perform wipe sequence x times, including random passes -b custom byte - overwrite once with a specific byte FILES /dev/urandom Wipe uses this character device for a source of entropy /dev/random Wipe falls back to using this if /dev/urandom is not available DIAGNOSTICS If an error occurs, the exit code will be the errno value. An exit code of 2 indicates bad usage. BUGS Wipe does not work on log structured file systems, or any other type of file system or block device that reallocates sectors on write. Some programs are vulnerable to symlink races. To avoid this problem with wipe, only wipe files in directories that are not writable by un- trusted users. NOTES Tapes and other sequential access devices Choose an appropriate buffer size to match the logic or physical block size of the device. When using the pattern passes, you should disable compression on the drive, and it's generally best to so for other passes as well. For VXA drives, I used mt-st under linux to set the block size to 0 (variable) and turn off compression, and I run wipe with a 64k block size, to match the on-tape format''s native block size. Example: mt-st setblk 0 mt-st compression 0 wipe -C64 /dev/st0 ALTERNATIVES Other file wiping utilities: Another "wipe" by Berke Durak <durakb@crit2.univ-montp2.fr> Colin Plumb's <colin@nyx.net> sterilize. Todd Burgess's <tburgess@eddie.cis.uoguelph.ca> srm is available on sunsite/metalab in ftp://metalab.unc.edu/pub/Linux/system/filesystems/ SEE ALSO /usr/local/share/doc/wipe/README AUTHORS Wipe Copyright (C) 1998-2009 Thomas M. Vier, Jr. <nester@users.sf.net> Mersenne Twister PRNG module Copyright (C) 1997 Makoto Matsumoto and Takuji Nishimura WIPE(1)
NAME | SYNOPSIS | DEFAULT | DESCRIPTION | OPTIONS | FILES | DIAGNOSTICS | BUGS | NOTES | ALTERNATIVES | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=wipe&sektion=1&manpath=FreeBSD+14.3-RELEASE+and+Ports>