FreeBSD Manual Pages
aegis -New_File(1) General Commands Manual aegis -New_File(1) NAME aegis new file - add new files to be created by a change SYNOPSIS aegis -New_File file-name... [ option... ] aegis -New_File -List [ option... ] aegis -New_File -Help DESCRIPTION The aegis -New_File command is used to add new files to a change. The named files will be added to the list of files in the change. For each file named, a new file is created in the development direc- tory, if it does not exist already. If the file already exists, it will not be altered. If you want a new source file to be executable (shell scripts, for ex- ample) then you simply use the normal chmod(1) command. If any of the file's executable bits are set at aede(1) time the file is remembered as executable and all execute bits (minus the project's umask) will be set by subsequent aecp(1) commands. If you name a directory on the command line, the entire directory tree will be searched for new files. (Note: absolutely everything will be added, including dot files and binary files, so you will need to clean out any junk first.) Files below this named directory which are al- ready in the change, or in the project, will be ignored. The file_name_accept and file_name_reject patterns in the project aegis.conf file will also be applied, see aepconf(5) for more informa- tion. Directory Example There are times when a command such as $ aenf fubar/* aegis: project "example": change 42: "fubar/glorp" already in change aegis: project "example": change 42: found 1 fatal error, no new files added $ will fail as shown. There are several ways to deal with this, the easiest being to simply name the directory: $ aenf fubar aegis: project "example": change 42: file "fubar/smiley" added aegis: project "example": change 42: file "fubar/frownie" added $ You could also use the find(1) command for arbitrarily complex file selection, but you must first exclude files that the above command ex- cludes automatically: $ aelcf > exclude $ aelpf >> exclude $ find fubar -type f | \ grep -v -f exclude | \ xargs aegis --new-file -v aegis: project "example": change 42: file "fubar/smiley" added aegis: project "example": change 42: file "fubar/frownie" added $ If you aren't using the exclude list, the find(1) command will need fine tuning for your development directory style. If you are using the symlink-style, you will need to add the find -nlink 1 option in addition to the find -type f option. $ find fubar -type f -nlinks 1 | \ xargs aegis --new-file -v aegis: project "example": change 42: file "fubar/smiley" added aegis: project "example": change 42: file "fubar/frownie" added $ If you are using the full-copy development directory style, you will have to use the exclude list method, above. File Templates When a new file is created in the development directory the project config file is searched for a template for the new file. If a tem- plate is found, the new file will be initialized to the template, oth- erwise it will be created empty. See aepconf(5) for more information. The simplest form is to use template files, such as file_template = [ { pattern = [ "*.c" ]; body = "${read_file ${source template/c abs}}"; }, { pattern = [ "test/*/.sh" ]; body = "${read_file ${source template/test abs}}"; }, ]; As you can see, the template files are part of the project source, so you can add the appropriate copyright notices, and wrappers, etc. The $source substitution locates them, if they are not part of the current change (and they usually are not). The template files themselves contain substitutions. The $filename substitution is available, and contains the name of the file being created. This can be manipulated in various ways when constructing the appropriate file contents. See aesub(5) for more information about substitutions. It is also possible to run a command to create the new file. You can do this instead of specifying a body string, viz: file_template = [ { pattern = [ "*" ]; body_command = "perl ${source template.pl abs} $filename"; }, ]; The command is run with a current directory set to the top of the de- velopment directory. It is an error if the command fails to create the file. You can mix-and-match the two techniques, body string and body_command, if you want. File Name Limitations There are a number of controls available to limit the form of project file names. All of these controls may be found in the project config- uration file, see aepconf(5) for more information. The most signifi- cant are briefly described here: maximum_filename_length = integer; This field is used to limit the length of filenames. All new files may not have path components longer than this. Defaults to 255 if not set. For maximum portability you should set this to 14. posix_filename_charset = boolean; This field may be used to limit the characters allowed in filenames to only those explicitly allowed by POSIX. Defaults to false if not set, meaning whatever your operating system will tolerate, except white space and high-bit-on characters. For maximum portability you should set this to true. dos_filename_required = boolean; This field may be used to limit filenames so that they conform to the DOS 8+3 filename limits and to the DOS filename charac- ter set. Defaults to false if not set. windows_filename_required = boolean; This field may be used to limit filenames so that they conform to the Windows98 and WindowsNT filename limits and character set. Defaults to false if not set. shell_safe_filenames = boolean; This field may be used to limit filenames so that they do not contain shell special characters. Defaults to true if not set. If this field is set to false, you will need to use the ${quote} substitution around filenames in commands, to ensure that filenames containing shell special characters do not have unintended side effects. Weird characters in filenames may also confuse your dependency maintenance tool. allow_white_space_in_filenames = boolean; This field may be used to allow white space characters in file names. This will allow the following characters to appear in file names: backspace (BS, \b, 0x08), horizontal tab (HT, \t, 0x09), new line (NL, \n, 0x0A), vertical tab (VT, \v, 0x0B), form feed (FF, \f, 0x0C), and carriage return (CR, \r, 0x0D). Defaults to false if not set. Note that this field does not override other file name fil- ters. It will be necessary to explicitly set shell_safe_- filenames = false as well. It will be necessary to set dos_- filename_required = false (the default) as well. It will be necessary to set posix_filename_charset = false (the default) as well. The user must take great care to use the ${quote} substitution around all file names in commands in the project configura- tion. And even then, substitutions which expect a space sepa- rated list of file names will have undefined results. allow_non_ascii_filenames = boolean; This field may be used to allow file names with non-ascii- printable characters in them. Usually this would mean a UTF8 or international charset of some kind. Defaults to false if not set. Note that this field does not override other file name fil- ters. It will be necessary to explicitly set shell_safe_- filenames = false as well. It will be necessary to set dos_- filename_required = false (the default) as well. It will be necessary to set posix_filename_charset = false (the default) as well. filename_pattern_accept = [ string ]; This field is used to specify a list of patterns of acceptable filenames. Defaults to "*" if not set. filename_pattern_reject = [ string ]; This field is used to specify a list of patterns of unaccept- able filenames. Please Note: Aegis also consults the underlying file system, to deter- mine its notion of maximum file size. Where the file system's maximum file size is less than maximum_filename_length, the filesystem wins. This can happen, for example, when you are using the Linux UMSDOS file system, or when you have an NFS mounted an ancient V7 filesystem. Setting maximum_filename_length to 255 in these cases does not alter the fact that the underlying file systems limits are far smaller (12 and 14, respectively). If your development directories (or your whole project) is on filesys- tems with filename limitations, or a portion of the heterogeneous builds take place in such an environment, it helps to tell Aegis what they are (using the project config file's fields) so that you don't run into the situation where the project builds on the more permissive environments, but fails with mysterious errors in the more limited en- vironments. If your development directories are routinely on a Linux UMSDOS filesystem, you would probably be better off setting dos_filename_re- quired = true, and also changing the development_directory_template field. Heterogeneous development with various Windows environments may also require this. File Name Interpretation The aegis program will attempt to determine the project file names from the file names given on the command line. All file names are stored within aegis projects as relative to the root of the baseline directory tree. The development directory and the integration direc- tory are shadows of this baseline directory, and so these relative names apply here, too. Files named on the command line are first con- verted to absolute paths if necessary. They are then compared with the baseline path, the development directory path, and the integration directory path, to determine a baseline-relative name. It is an error if the file named is outside one of these directory trees. The -BAse_RElative option may be used to cause relative filenames to be interpreted as relative to the baseline path; absolute filenames will still be compared with the various paths in order to determine a baseline-relative name. The relative_filename_preference in the user configuration file may be used to modify this default behavior. See aeuconf(5) for more infor- mation. Changing the Type of a File If you want to change the type of a file (say, from a test to a source file, or vice versa) you could do it as two changes, by first using aerm(1) in one change and then using aenf(1) or aent(1) in a second change, or you can combine both steps in the same change. Remember to use the aerm -nowhiteout option or you will get a most peculiar new file template. File Action Adjustment When this command runs, it first checks the change files against the projects files. If there are inconsistencies, the file actions will be adjusted as follows: create If a file is being created, but another change set is inte- grated which also creates the file, the file action in the change set still being developed will be adjusted to "modify". modify If a file is being modified, but another change set is inte- grated which removes the file, the file action in the change set still being developed will be adjusted to "create". remove If a file is being removed, but another change set is inte- grated which removes the file, the file will be dropped from the change set still being developed. Notification The new_file_command in the project configuration file is run, if set. The project_file_command is also run, if set, and if there has been an integration recently. See aepconf(5) for more information. TEST CORRELATIONS The "aegis -Test -SUGgest" command may be used to have aegis suggest suitable regression tests for your change, based on the source files in your change. This automatically focuses testing effort to relevant tests, reducing the number of regression tests necessary to be confi- dent that you have not introduced a bug. The test correlations are generated by the "aegis -Integrate_Pass" command, which associates each test in the change with each source file in the change. Thus, each source file accumulates a list of tests which have been associated with it in the past. This is not as exact as code coverage analysis, but is a reasonable approximation in practice. The aecp(1) and aenf(1) commands are used to associate files with a change. While they do not actively perform the association, these are the files used by aeipass(1) and aet(1) to determine which source files are associated with which tests. Test Correlation Accuracy Assuming that the testing correlations are accurate and that the tests are evenly distributed across the function space, there will be a less than 1/number chance that a relevant test has not been run by the "aegis -Test -SUGgest number" command. A small amount of noise is added to the test weighting, so that unexpected things are sometimes tested, and the same tests are not run every time. Test correlation accuracy can be improved by ensuring that: o Each change should be strongly focused, with no gratuitous file in- clusions. This avoids spurious correlations. o Each item of new functionality should be added in an individual change, rather than several together. This strongly correlates tests with functionality. o Each bug should be fixed in an individual change, rather than sev- eral together. This strongly correlates tests with functionality. o Test correlations will be lost if files are moved. This is because correlations are by name. The best way for tests to correlate accurately with source files is when a change contains a test and exactly those files relating to the functionality under test. Too many spurious files will weaken the usefulness of the testing correlations. OPTIONS The following options are understood -as-needed Usually it is an error if a file is already in a change set, and is redundantly added to the change set again. This option says to ignore such files. -Build This option may be used to specify that the file is construc- ted during a build (often only an integrate build), so that history of it may be kept. This is useful for generating patch files, where a history of generated files is important. Files created in this way may not be copied into a change, though they may be deleted. Avoid using files of this type, if at all possible. -BAse_RElative This option may be used to cause relative filenames to be con- sidered relative to the base of the source tree. See aeu- conf(5) for the corresponding user preference. -CUrrent_RElative This option may be used to cause relative filenames to be con- sidered relative to the current directory. This is usually the default. See aeuconf(5) for the corresponding user pref- erence. -Change number This option may be used to specify a particular change within a project. See aegis(1) for a complete description of this option. -CONFIGured This option may be used to specify that the file is an Aegis project configuration file. The default project configuration file is called aegis.conf, however any file name may be used. You may also use more than one file, splitting the content across several files, all of which must be of this type. -Help This option may be used to obtain more information about how to use the aegis program. -INDependent The option may be used to request all the necessary actions, but not to actually add the new file to the change set. -Keep This option may be used to retain files and/or directories usually deleted or replaced by the command. Defaults to the user's delete_file_preference if not specified, see aeuconf(5) for more information. -No_Keep This option may be used to ensure that the files and/or direc- tories are deleted or replaced by the command. Defaults to the user's delete_file_preference if not specified, see aeu- conf(5) for more information. -List This option may be used to obtain a list of suitable subjects for this command. The list may be more general than expected. -Not_Logging This option may be used to disable the automatic logging of output and errors to a file. This is often useful when sev- eral aegis commands are combined in a shell script. -Project name This option may be used to select the project of interest. When no -Project option is specified, the AEGIS_PROJECT envi- ronment variable is consulted. If that does not exist, the user's $HOME/.aegisrc file is examined for a default project field (see aeuconf(5) for more information). If that does not exist, when the user is only working on changes within a sin- gle project, the project name defaults to that project. Oth- erwise, it is an error. -TEMplate This option may be used to specify that a new file template should be used, even if the file already exists. -No_TEMplate This option may be used to specify that a new file template should not be used, even if the file does not exist (any empty file will be created). -TERse This option may be used to cause listings to produce the bare minimum of information. It is usually useful for shell scripts. -Universal_Unique_IDentifier string This option may be used to set the UUID of a file. -Not_Universal_Unique_IDentifier This option may be used to require that the file is created without an UUID. The aeipass-option:assign-file-uuid is set to false for the file to avoid automatic UUID assignment when aeipass(1) is invoked. -Verbose This option may be used to cause aegis to produce more output. By default aegis only produces output on errors. When used with the -List option this option causes column headings to be added. -Wait This option may be used to require Aegis commands to wait for access locks, if they cannot be obtained immediately. De- faults to the user's lock_wait_preference if not specified, see aeuconf(5) for more information. -No_Wait This option may be used to require Aegis commands to emit a fatal error if access locks cannot be obtained immediately. Defaults to the user's lock_wait_preference if not specified, see aeuconf(5) for more information. See also aegis(1) for options common to all aegis commands. All options may be abbreviated; the abbreviation is documented as the upper case letters, all lower case letters and underscores (_) are op- tional. You must use consecutive sequences of optional letters. All options are case insensitive, you may type them in upper case or lower case or a combination of both, case is not important. For example: the arguments "-project", "-PROJ" and "-p" are all inter- preted to mean the -Project option. The argument "-prj" will not be understood, because consecutive optional characters were not supplied. Options and other command line arguments may be mixed arbitrarily on the command line, after the function selectors. The GNU long option names are understood. Since all option names for aegis are long, this means ignoring the extra leading '-'. The "--op- tion=value" convention is also understood. RECOMMENDED ALIAS The recommended alias for this command is csh% alias aenf 'aegis -nf \!* -v' sh$ aenf(){aegis -nf "$@" -v} ERRORS It is an error if the change is not in the being developed state. It is an error if the change is not assigned to the current user. It is an error if the file is already part of the change. It is an error if the file is already part of the baseline. It is an error if the files named on the command line are not normal files and not directories. (If you need symbolic links or special files, create them at build time.) EXIT STATUS The aegis command will exit with a status of 1 on any error. The aegis command will only exit with a status of 0 if there are no er- rors. ENVIRONMENT VARIABLES See aegis(1) for a list of environment variables which may affect this command. See aepconf(5) for the project configuration file's project_specific field for how to set environment variables for all commands executed by Aegis. SEE ALSO aecp(1) copy files into a change aedb(1) begin development of a change aemv(1) rename a file as part of a change aenfu(1) remove new files from a change aent(1) add new tests to a change aerm(1) add files to be deleted by a change aepconf(5) project configuration file format aeuconf(5) user configuration file format COPYRIGHT aegis version 4.25.D510 Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 Peter Miller The aegis program comes with ABSOLUTELY NO WARRANTY; for details use the 'aegis -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'aegis -VERSion License' command. AUTHOR Peter Miller E-Mail: pmiller@opensource.org.au /\/\* WWW: http://miller.emu.id.au/pmiller/ Reference Manual Aegis aegis -New_File(1)
NAME | SYNOPSIS | DESCRIPTION | TEST CORRELATIONS | OPTIONS | RECOMMENDED ALIAS | ERRORS | EXIT STATUS | ENVIRONMENT VARIABLES | SEE ALSO | COPYRIGHT | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=aenf&sektion=1&manpath=FreeBSD+12.1-RELEASE+and+Ports>