FreeBSD Manual Pages
ATOMIC(9) FreeBSD Kernel Developer's Manual ATOMIC(9) NAME atomic_add, atomic_clear, atomic_cmpset, atomic_fcmpset, atomic_fetchadd, atomic_interrupt_fence, atomic_load, atomic_readandclear, atomic_set, atomic_subtract, atomic_store, atomic_thread_fence -- atomic operations SYNOPSIS #include <machine/atomic.h> void atomic_add_[acq_|rel_]<type>(volatile _type_ *p, _type_ v); void atomic_clear_[acq_|rel_]<type>(volatile _type_ *p, _type_ v); int atomic_cmpset_[acq_|rel_]<type>(volatile _type_ *dst, _type_ old, _type_ new); int atomic_fcmpset_[acq_|rel_]<type>(volatile _type_ *dst, _type_ *old, _type_ new); _type_ atomic_fetchadd_<type>(volatile _type_ *p, _type_ v); void atomic_interrupt_fence(void); _type_ atomic_load_[acq_]<type>(volatile _type_ *p); _type_ atomic_readandclear_<type>(volatile _type_ *p); void atomic_set_[acq_|rel_]<type>(volatile _type_ *p, _type_ v); void atomic_subtract_[acq_|rel_]<type>(volatile _type_ *p, _type_ v); void atomic_store_[rel_]<type>(volatile _type_ *p, _type_ v); _type_ atomic_swap_<type>(volatile _type_ *p, _type_ v); int atomic_testandclear_<type>(volatile _type_ *p, u_int v); int atomic_testandset_<type>(volatile _type_ *p, u_int v); void atomic_thread_fence_[acq|acq_rel|rel|seq_cst](void); DESCRIPTION Atomic operations are commonly used to implement reference counts and as building blocks for synchronization primitives, such as mutexes. All of these operations are performed atomically across multiple threads and in the presence of interrupts, meaning that they are performed in an indivisible manner from the perspective of concurrently running threads and interrupt handlers. On all architectures supported by FreeBSD, ordinary loads and stores of integers in cache-coherent memory are inherently atomic if the integer is naturally aligned and its size does not exceed the processor's word size. However, such loads and stores may be elided from the program by the com- piler, whereas atomic operations are always performed. When atomic operations are performed on cache-coherent memory, all opera- tions on the same location are totally ordered. When an atomic load is performed on a location in cache-coherent memory, it reads the entire value that was defined by the last atomic store to each byte of the location. An atomic load will never return a value out of thin air. When an atomic store is performed on a location, no other thread or interrupt handler will observe a torn write, or partial modifi- cation of the location. Except as noted below, the semantics of these operations are almost iden- tical to the semantics of similarly named C11 atomic operations. Types Most atomic operations act upon a specific type. That type is indicated in the function name. In contrast to C11 atomic operations, FreeBSD's atomic operations are performed on ordinary integer types. The available types are: int unsigned integer long unsigned long integer ptr unsigned integer the size of a pointer 32 unsigned 32-bit integer 64 unsigned 64-bit integer For example, the function to atomically add two integers is called atomic_add_int(). Certain architectures also provide operations for types smaller than "int". char unsigned character short unsigned short integer 8 unsigned 8-bit integer 16 unsigned 16-bit integer These types must not be used in machine-independent code. Acquire and Release Operations By default, a thread's accesses to different memory locations might not be performed in program order, that is, the order in which the accesses appear in the source code. To optimize the program's execution, both the compiler and processor might reorder the thread's accesses. However, both ensure that their reordering of the accesses is not visible to the thread. Otherwise, the traditional memory model that is expected by sin- gle-threaded programs would be violated. Nonetheless, other threads in a multithreaded program, such as the FreeBSD kernel, might observe the re- ordering. Moreover, in some cases, such as the implementation of syn- chronization between threads, arbitrary reordering might result in the incorrect execution of the program. To constrain the reordering that both the compiler and processor might perform on a thread's accesses, a programmer can use atomic operations with acquire and release semantics. Atomic operations on memory have up to three variants. The first, or relaxed variant, performs the operation without imposing any ordering constraints on accesses to other memory locations. This variant is the default. The second variant has acquire semantics, and the third variant has release semantics. When an atomic operation has acquire semantics, the operation must have completed before any subsequent load or store (by program order) is per- formed. Conversely, acquire semantics do not require that prior loads or stores have completed before the atomic operation is performed. An atomic operation can only have acquire semantics if it performs a load from memory. To denote acquire semantics, the suffix "_acq" is inserted into the function name immediately prior to the "_<type>" suffix. For example, to subtract two integers ensuring that the subtraction is com- pleted before any subsequent loads and stores are performed, use atomic_subtract_acq_int(). When an atomic operation has release semantics, all prior loads or stores (by program order) must have completed before the operation is performed. Conversely, release semantics do not require that the atomic operation must have completed before any subsequent load or store is performed. An atomic operation can only have release semantics if it performs a store to memory. To denote release semantics, the suffix "_rel" is inserted into the function name immediately prior to the "_<type>" suffix. For example, to add two long integers ensuring that all prior loads and stores are completed before the addition is performed, use atomic_add_rel_long(). When a release operation by one thread synchronizes with an acquire oper- ation by another thread, usually meaning that the acquire operation reads the value written by the release operation, then the effects of all prior stores by the releasing thread must become visible to subsequent loads by the acquiring thread. Moreover, the effects of all stores (by other threads) that were visible to the releasing thread must also become visi- ble to the acquiring thread. These rules only apply to the synchronizing threads. Other threads might observe these stores in a different order. In effect, atomic operations with acquire and release semantics establish one-way barriers to reordering that enable the implementations of syn- chronization primitives to express their ordering requirements without also imposing unnecessary ordering. For example, for a critical section guarded by a mutex, an acquire operation when the mutex is locked and a release operation when the mutex is unlocked will prevent any loads or stores from moving outside of the critical section. However, they will not prevent the compiler or processor from moving loads or stores into the critical section, which does not violate the semantics of a mutex. Thread Fence Operations Alternatively, a programmer can use atomic thread fence operations to constrain the reordering of accesses. In contrast to other atomic opera- tions, fences do not, themselves, access memory. When a fence has acquire semantics, all prior loads (by program order) must have completed before any subsequent load or store is performed. Thus, an acquire fence is a two-way barrier for load operations. To de- note acquire semantics, the suffix "_acq" is appended to the function name, for example, atomic_thread_fence_acq(). When a fence has release semantics, all prior loads or stores (by program order) must have completed before any subsequent store operation is per- formed. Thus, a release fence is a two-way barrier for store operations. To denote release semantics, the suffix "_rel" is appended to the func- tion name, for example, atomic_thread_fence_rel(). Although atomic_thread_fence_acq_rel() implements both acquire and re- lease semantics, it is not a full barrier. For example, a store prior to the fence (in program order) may be completed after a load subsequent to the fence. In contrast, atomic_thread_fence_seq_cst() implements a full barrier. Neither loads nor stores may cross this barrier in either di- rection. In C11, a release fence by one thread synchronizes with an acquire fence by another thread when an atomic load that is prior to the acquire fence (by program order) reads the value written by an atomic store that is subsequent to the release fence. In constrast, in FreeBSD, because of the atomicity of ordinary, naturally aligned loads and stores, fences can also be synchronized by ordinary loads and stores. This simplifies the implementation and use of some synchronization primitives in FreeBSD. Since neither a compiler nor a processor can foresee which (atomic) load will read the value written by an (atomic) store, the ordering con- straints imposed by fences must be more restrictive than acquire loads and release stores. Essentially, this is why fences are two-way barri- ers. Although fences impose more restrictive ordering than acquire loads and release stores, by separating access from ordering, they can sometimes facilitate more efficient implementations of synchronization primitives. For example, they can be used to avoid executing a memory barrier until a memory access shows that some condition is satisfied. Interrupt Fence Operations The atomic_interrupt_fence()() function establishes ordering between its call location and any interrupt handler executing on the same CPU. It is modeled after the similar C11 function atomic_signal_fence()(), and adapted for the kernel environment. Multiple Processors In multiprocessor systems, the atomicity of the atomic operations on mem- ory depends on support for cache coherence in the underlying architec- ture. In general, cache coherence on the default memory type, VM_MEMATTR_DEFAULT, is guaranteed by all architectures that are supported by FreeBSD. For example, cache coherence is guaranteed on write-back memory by the amd64 and i386 architectures. However, on some architec- tures, cache coherence might not be enabled on all memory types. To de- termine if cache coherence is enabled for a non-default memory type, con- sult the architecture's documentation. Semantics This section describes the semantics of each operation using a C like no- tation. atomic_add(p, v) *p += v; atomic_clear(p, v) *p &= ~v; atomic_cmpset(dst, old, new) if (*dst == old) { *dst = new; return (1); } else return (0); Some architectures do not implement the atomic_cmpset() functions for the types "char", "short", "8", and "16". atomic_fcmpset(dst, *old, new) On architectures implementing Compare And Swap operation in hardware, the functionality can be described as if (*dst == *old) { *dst = new; return (1); } else { *old = *dst; return (0); } On architectures which provide Load Linked/Store Conditional primitive, the write to *dst might also fail for several reasons, most important of which is a parallel write to *dst cache line by other CPU. In this case atomic_fcmpset() function also returns false, despite *old == *dst. Some architectures do not implement the atomic_fcmpset() functions for the types "char", "short", "8", and "16". atomic_fetchadd(p, v) tmp = *p; *p += v; return (tmp); The atomic_fetchadd() functions are only implemented for the types "int", "long" and "32" and do not have any variants with memory barriers at this time. atomic_load(p) return (*p); atomic_readandclear(p) tmp = *p; *p = 0; return (tmp); The atomic_readandclear() functions are not implemented for the types "char", "short", "ptr", "8", and "16" and do not have any variants with memory barriers at this time. atomic_set(p, v) *p |= v; atomic_subtract(p, v) *p -= v; atomic_store(p, v) *p = v; atomic_swap(p, v) tmp = *p; *p = v; return (tmp); The atomic_swap() functions are not implemented for the types "char", "short", "ptr", "8", and "16" and do not have any variants with memory barriers at this time. atomic_testandclear(p, v) bit = 1 << (v % (sizeof(*p) * NBBY)); tmp = (*p & bit) != 0; *p &= ~bit; return (tmp); atomic_testandset(p, v) bit = 1 << (v % (sizeof(*p) * NBBY)); tmp = (*p & bit) != 0; *p |= bit; return (tmp); The atomic_testandset() and atomic_testandclear() functions are only im- plemented for the types "int", "long" and "32" and do not have any vari- ants with memory barriers at this time. The type "64" is currently not implemented for some of the atomic opera- tions on the arm, i386, and powerpc architectures. RETURN VALUES The atomic_cmpset() function returns the result of the compare operation. The atomic_fcmpset() function returns true if the operation succeeded. Otherwise it returns false and sets *old to the found value. The atomic_fetchadd(), atomic_load(), atomic_readandclear(), and atomic_swap() functions return the value at the specified address. The atomic_testandset() and atomic_testandclear() function returns the result of the test operation. EXAMPLES This example uses the atomic_cmpset_acq_ptr() and atomic_set_ptr() func- tions to obtain a sleep mutex and handle recursion. Since the mtx_lock member of a struct mtx is a pointer, the "ptr" type is used. /* Try to obtain mtx_lock once. */ #define _obtain_lock(mp, tid) \ atomic_cmpset_acq_ptr(&(mp)->mtx_lock, MTX_UNOWNED, (tid)) /* Get a sleep lock, deal with recursion inline. */ #define _get_sleep_lock(mp, tid, opts, file, line) do { \ uintptr_t _tid = (uintptr_t)(tid); \ \ if (!_obtain_lock(mp, tid)) { \ if (((mp)->mtx_lock & MTX_FLAGMASK) != _tid) \ _mtx_lock_sleep((mp), _tid, (opts), (file), (line));\ else { \ atomic_set_ptr(&(mp)->mtx_lock, MTX_RECURSE); \ (mp)->mtx_recurse++; \ } \ } \ } while (0) HISTORY The atomic_add(), atomic_clear(), atomic_set(), and atomic_subtract() op- erations were introduced in FreeBSD 3.0. Initially, these operations were defined on the types "char", "short", "int", and "long". The atomic_cmpset(), atomic_load_acq(), atomic_readandclear(), and atomic_store_rel() operations were added in FreeBSD 5.0. Simultaneously, the acquire and release variants were introduced, and support was added for operation on the types "8", "16", "32", "64", and "ptr". The atomic_fetchadd() operation was added in FreeBSD 6.0. The atomic_swap() and atomic_testandset() operations were added in FreeBSD 10.0. The atomic_testandclear() and atomic_thread_fence() operations were added in FreeBSD 11.0. The relaxed variants of atomic_load() and atomic_store() were added in FreeBSD 12.0. The atomic_interrupt_fence() operation was added in FreeBSD 13.0. FreeBSD 13.0 January 16, 2023 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUES | EXAMPLES | HISTORY
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=atomic&sektion=9&manpath=FreeBSD+13.2-RELEASE+and+Ports>