FreeBSD Manual Pages
AUE(4) BSD Kernel Interfaces Manual AUE(4) NAME aue -- ADMtek AN986 Pegasus USB Ethernet driver SYNOPSIS device uhci device ohci device usb device miibus device aue DESCRIPTION The aue driver provides support for USB ethernet adapters based on the ADMtek AN986 Pegasus chipset, including the LinkSys USB100TX, the Bil- lionton Systems USB100, the Melco Inc. LU-ATX, the D-Link DSB-650TX, the SMC 2202USB, and those LinkSys USB10T adapters that contain the AN986 Pe- gasus chipset. The LinkSys USB10T adapters that contain the AN986 Pega- sus chipset will operate at 100Base-TX and full-duplex. The Pegasus contains a 10/100 ethernet MAC with MII interface and is de- signed to work with both ethernet and HomePNA transceivers. Although de- signed to interface with 100Mbps peripherals, the existing USB standard specifies a maximum transfer speed of 12Mbps. Users should therefore not expect to actually achieve 100Mbps speeds with these devices. The Pegasus supports a 64-bit multicast hash table, single perfect filter entry for the station address and promiscuous mode. Packets are received and transmitted over separate USB bulk transfer endpoints. The aue driver supports the following media types: autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to the /etc/rc.conf file. 10baseT/UTP Set 10Mbps operation. The mediaopt option can also be used to enable full-duplex operation. Not spec- ifying full duplex implies half-duplex mode. 100baseTX Set 100Mbps (fast ethernet) operation. The mediaopt option can also be used to enable full-duplex operation. Not specifying full duplex implies half-duplex mode. The aue driver supports the following media options: full-duplex Force full duplex operation. The interface will operate in half duplex mode if this media option is not specified. For more information on configuring this device, see ifconfig(8). DIAGNOSTICS aue%d: watchdog timeout A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the transmission before a timeout expired. aue%d: no memory for rx list The driver failed to allocate an mbuf for the receiver ring. SEE ALSO arp(4), netintro(4), ng_ether(4), ifconfig(8) ADMtek AN986 data sheet, http://www.admtek.com.tw. HISTORY The aue device driver first appeared in FreeBSD 4.0. AUTHORS The aue driver was written by Bill Paul <wpaul@ee.columbia.edu>. BSD December 25, 1999 BSD
NAME | SYNOPSIS | DESCRIPTION | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=aue&sektion=4&manpath=FreeBSD+4.5-RELEASE>