Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages


home | help
EDITLINE(3)	       FreeBSD Library Functions Manual		   EDITLINE(3)

     editline, el_init,	el_init_fd, el_end, el_reset, el_gets, el_wgets,
     el_getc, el_wgetc,	el_push, el_wpush, el_parse, el_wparse,	el_set,
     el_wset, el_get, el_wget, el_source, el_resize, el_cursor,	el_line,
     el_wline, el_insertstr, el_winsertstr, el_deletestr, el_wdeletestr,
     history_init, history_winit, history_end, history_wend, history,
     history_w,	tok_init, tok_winit, tok_end, tok_wend,	tok_reset, tok_wreset,
     tok_line, tok_wline, tok_str, tok_wstr -- line editor, history and	tok-
     enization functions

     Line Editor and History Library (libedit, -ledit)

     #include <histedit.h>

     EditLine *
     el_init(const char	*prog, FILE *fin, FILE *fout, FILE *ferr);

     EditLine *
     el_init_fd(const char *prog, FILE *fin, FILE *fout, FILE *ferr, int fdin,
	 int fdout, int	fderr);

     el_end(EditLine *e);

     el_reset(EditLine *e);

     const char	*
     el_gets(EditLine *e, int *count);

     const wchar_t *
     el_wgets(EditLine *e, int *count);

     el_getc(EditLine *e, char *ch);

     el_wgetc(EditLine *e, wchar_t *ch);

     el_push(EditLine *e, const	char *str);

     el_wpush(EditLine *e, const wchar_t *str);

     el_parse(EditLine *e, int argc, const char	*argv[]);

     el_wparse(EditLine	*e, int	argc, const wchar_t *argv[]);

     el_set(EditLine *e, int op, ...);

     el_wset(EditLine *e, int op, ...);

     el_get(EditLine *e, int op, ...);

     el_wget(EditLine *e, int op, ...);

     el_source(EditLine	*e, const char *file);

     el_resize(EditLine	*e);


     el_cursor(EditLine	*e, int	count);

     const LineInfo *
     el_line(EditLine *e);

     const LineInfoW *
     el_wline(EditLine *e);

     el_insertstr(EditLine *e, const char *str);

     el_winsertstr(EditLine *e,	const wchar_t *str);

     el_deletestr(EditLine *e, int count);

     el_wdeletestr(EditLine *e,	int count);

     History *

     HistoryW *

     history_end(History *h);

     history_wend(HistoryW *h);

     history(History *h, HistEvent *ev,	int op,	...);

     history_w(HistoryW	*h, HistEventW *ev, int	op, ...);

     Tokenizer *
     tok_init(const char *IFS);

     TokenizerW	*
     tok_winit(const wchar_t *IFS);

     tok_end(Tokenizer *t);

     tok_wend(TokenizerW *t);

     tok_reset(Tokenizer *t);

     tok_wreset(TokenizerW *t);

     tok_line(Tokenizer	*t, const LineInfo *li,	int *argc,
	 const char **argv[], int *cursorc, int	*cursoro);

     tok_wline(TokenizerW *t, const LineInfoW *li, int *argc,
	 const wchar_t **argv[], int *cursorc, int *cursoro);

     tok_str(Tokenizer *t, const char *str, int	*argc, const char **argv[]);

     tok_wstr(TokenizerW *t, const wchar_t *str, int *argc,
	 const wchar_t **argv[]);

     The editline library provides generic line	editing, history and tokeniza-
     tion functions, similar to	those found in sh(1).

     These functions are available in the libedit library (which needs the
     libtermcap	library).  Programs should be linked with -ledit -ltermcap.

     The editline library respects the LC_CTYPE	locale set by the application
     program and never uses setlocale(3) to change the locale.	The only lo-
     cales supported are UTF-8 and the default C or POSIX locale.  If any
     other locale is set, behaviour is undefined.

     The line editing functions	use a common data structure, EditLine, which
     is	created	by el_init() or	el_init_fd() and freed by el_end().

     The wide-character	functions behave the same way as their narrow counter-

     The following functions are available:

	   Initialize the line editor, and return a data structure to be used
	   by all other	line editing functions,	or NULL	on failure.  prog is
	   the name of the invoking program, used when reading the editrc(5)
	   file	to determine which settings to use.  fin, fout and ferr	are
	   the input, output, and error	streams	(respectively) to use.	In
	   this	documentation, references to "the tty" are actually to this
	   input/output	stream combination.

	   Like	el_init() but allows specifying	file descriptors for the
	   stdio(3) corresponding streams, in case those were created with

	   Clean up and	finish with e, assumed to have been created with
	   el_init() or	el_init_fd().

	   Reset the tty and the parser.  This should be called	after an error
	   which may have upset	the tty's state.

	   Read	a line from the	tty.  count is modified	to contain the number
	   of characters read.	Returns	the line read if successful, or	NULL
	   if no characters were read or if an error occurred.	If an error
	   occurred, count is set to -1	and errno contains the error code that
	   caused it.  The return value	may not	remain valid across calls to
	   el_gets() and must be copied	if the data is to be retained.

	   Read	a wide character from the tty, respecting the current locale,
	   or from the input stream written by el_wpush() and el_push()	if
	   that	is not empty, and store	it in ch.  If an invalid or incomplete
	   character is	found, it is discarded,	errno is set to	EILSEQ,	and
	   the next character is read and stored in ch.	 Returns 1 if a	valid
	   character was read, 0 on end	of file, or -1 on read(2) failure.  In
	   the latter case, errno is set to indicate the error.

	   Read	a wide character as described for el_wgetc() and return	0 on
	   end of file or -1 on	failure.  If the wide character	can be repre-
	   sented as a single-byte character, convert it with wctob(3),	store
	   the result in ch, and return	1; otherwise, set errno	to ERANGE and
	   return -1.  In the C	or POSIX locale, this simply reads a byte, but
	   for any other locale, including UTF-8, this is rarely useful.

	   Pushes str back onto	the input stream.  This	is used	by the macro
	   expansion mechanism.	 Refer to the description of bind -s in
	   editrc(5) for more information.

	   Parses the argv array (which	is argc	elements in size) to execute
	   builtin editline commands.  If the command is prefixed with "prog":
	   then	el_parse() will	only execute the command if "prog" matches the
	   prog	argument supplied to el_init().	 The return value is -1	if the
	   command is unknown, 0 if there was no error or "prog" didn't	match,
	   or 1	if the command returned	an error.  Refer to editrc(5) for more

	   Set editline	parameters.  op	determines which parameter to set, and
	   each	operation has its own parameter	list.  Returns 0 on success,
	   -1 on failure.

	   The following values	for op are supported, along with the required
	   argument list:

	   EL_PROMPT, char *(*f)(EditLine *)
		 Define	prompt printing	function as f, which is	to return a
		 string	that contains the prompt.

	   EL_PROMPT_ESC, char *(*f)(EditLine *), char c
		 Same as EL_PROMPT, but	the c argument indicates the
		 start/stop literal prompt character.

		 If a start/stop literal character is found in the prompt, the
		 character itself is not printed, but characters after it are
		 printed directly to the terminal without affecting the	state
		 of the	current	line.  A subsequent second start/stop literal
		 character ends	this behavior.	This is	typically used to em-
		 bed literal escape sequences that change the color/style of
		 the terminal in the prompt.  0	unsets it.

		 Re-display the	current	line on	the next terminal line.

	   EL_RPROMPT, char *(*f)(EditLine *)
		 Define	right side prompt printing function as f, which	is to
		 return	a string that contains the prompt.

	   EL_RPROMPT_ESC, char	*(*f)(EditLine *), char	c
		 Define	the right prompt printing function but with a literal
		 escape	character.

	   EL_TERMINAL,	const char *type
		 Define	terminal type of the tty to be type, or	to TERM	if
		 type is NULL.

	   EL_EDITOR, const char *mode
		 Set editing mode to mode, which must be one of	"emacs"	or

	   EL_SIGNAL, int flag
		 If flag is non-zero, editline will install its	own signal
		 handler for the following signals when	reading	command	input:
		 and SIGWINCH.	Otherwise, the current signal handlers will be

	   EL_BIND, const char *, ..., NULL
		 Perform the bind builtin command.  Refer to editrc(5) for
		 more information.

	   EL_ECHOTC, const char *, ..., NULL
		 Perform the echotc builtin command.  Refer to editrc(5) for
		 more information.

	   EL_SETTC, const char	*, ...,	NULL
		 Perform the settc builtin command.  Refer to editrc(5)	for
		 more information.

	   EL_SETTY, const char	*, ...,	NULL
		 Perform the setty builtin command.  Refer to editrc(5)	for
		 more information.

	   EL_TELLTC, const char *, ..., NULL
		 Perform the telltc builtin command.  Refer to editrc(5) for
		 more information.

	   EL_ADDFN, const char	*name, const char *help, unsigned char
		 (*func)(EditLine *e, int ch)
		 Add a user defined function, func(), referred to as name
		 which is invoked when a key which is bound to name is en-
		 tered.	 help is a description of name.	 At invocation time,
		 ch is the key which caused the	invocation.  The return	value
		 of func() should be one of:

		 CC_NORM       Add a normal character.

		 CC_NEWLINE    End of line was entered.

		 CC_EOF	       EOF was entered.

		 CC_ARGHACK    Expecting further command input as arguments,
			       do nothing visually.

		 CC_REFRESH    Refresh display.

			       Refresh display,	and beep.

		 CC_CURSOR     Cursor moved, so	update and perform CC_REFRESH.

		 CC_REDISPLAY  Redisplay entire	input line.  This is useful if
			       a key binding outputs extra information.

		 CC_ERROR      An error	occurred.  Beep, and flush tty.

		 CC_FATAL      Fatal error, reset tty to known state.

	   EL_HIST, History *(*func)(History *,	int op,	...), const char *ptr
		 Defines which history function	to use,	which is usually
		 history().  ptr should	be the value returned by

	   EL_EDITMODE,	int flag
		 If flag is non-zero, editing is enabled (the default).	 Note
		 that this is only an indication, and does not affect the op-
		 eration of editline.  At this time, it	is the caller's	re-
		 sponsibility to check this (using el_get()) to	determine if
		 editing should	be enabled or not.

	   EL_UNBUFFERED, int flag
		 If flag is zero, unbuffered mode is disabled (the default).
		 In unbuffered mode, el_gets() will return immediately after
		 processing a single character.

	   EL_GETCFN, int (*f)(EditLine	*, char	*c)
		 Define	the character reading function as f, which is to re-
		 turn the number of characters read and	store them in c.  This
		 function is called internally by el_gets() and	el_getc().
		 The builtin function can be set or restored with the special
		 function name "EL_BUILTIN_GETCFN".

	   EL_CLIENTDATA, void *data
		 Register data to be associated	with this EditLine structure.
		 It can	be retrieved with the corresponding el_get() call.

	   EL_SETFP, int fd, FILE *fp
		 Set the current editline file pointer for "input" fd =	0,
		 "output" fd = 1, or "error" fd	= 2 from fp.

	   Get editline	parameters.  op	determines which parameter to retrieve
	   into	result.	 Returns 0 if successful, -1 otherwise.

	   The following values	for op are supported, along with actual	type
	   of result:

	   EL_PROMPT, char *(*f)(EditLine *), char *c
		 Set f.	 to a pointer to the function that displays the
		 prompt.  If c is not NULL, set	it to the start/stop literal
		 prompt	character.

	   EL_RPROMPT, char *(*f)(EditLine *), char *c
		 Set f.	 to a pointer to the function that displays the
		 prompt.  If c is not NULL, set	it to the start/stop literal
		 prompt	character.

	   EL_EDITOR, const char **n
		 Set the name of the editor in n, which	will be	one of "emacs"
		 or "vi".

	   EL_GETTC, const char	*name, void *value
		 If name is a valid termcap(5) capability set value to the
		 current value of that capability.

	   EL_SIGNAL, int *s
		 Set s to non zero if editline has installed private signal
		 handlers (see el_get()	above).

	   EL_EDITMODE,	int *c
		 Set c to non-zero if editing is enabled.

	   EL_GETCFN, int (**f)(EditLine *, char *)
		 Return	a pointer to the function that read characters,	which
		 is equal to "EL_BUILTIN_GETCFN" in the	case of	the default
		 builtin function.

	   EL_CLIENTDATA, void **data
		 Set data to the previously registered client data set by an
		 el_set() call.

	   EL_UNBUFFERED, int *c
		 Set c to non-zero if unbuffered mode is enabled.

	   EL_GETFP, int fd, FILE **fp
		 Set fp	to the current editline	file pointer for "input" fd =
		 0, "output" fd	= 1, or	"error"	fd = 2.

	   Initialize editline by reading the contents of file.	 el_parse() is
	   called for each line	in file.  If file is NULL, try $HOME/.editrc.
	   Refer to editrc(5) for details on the format	of file.  el_source()
	   returns 0 on	success	and -1 on error.

	   Must	be called if the terminal size changes.	 If EL_SIGNAL has been
	   set with el_set(), then this	is done	automatically.	Otherwise,
	   it's	the responsibility of the application to call el_resize() on
	   the appropriate occasions.

	   Move	the cursor to the right	(if positive) or to the	left (if nega-
	   tive) count characters.  Returns the	resulting offset of the	cursor
	   from	the beginning of the line.

	   Return the editing information for the current line in a LineInfo
	   structure, which is defined as follows:

	   typedef struct lineinfo {
	       const char *buffer;    /* address of buffer */
	       const char *cursor;    /* address of cursor */
	       const char *lastchar;  /* address of last character */
	   } LineInfo;

	   buffer is not NUL terminated.  This function	may be called after
	   el_gets() to	obtain the LineInfo structure pertaining to line re-
	   turned by that function, and	from within user defined functions
	   added with EL_ADDFN.

	   Insert str into the line at the cursor.  Returns -1 if str is empty
	   or won't fit, and 0 otherwise.

	   Delete count	characters before the cursor.

     The history functions use a common	data structure,	History, which is cre-
     ated by history_init() and	freed by history_end().

     The following functions are available:

	   Initialize the history list,	and return a data structure to be used
	   by all other	history	list functions,	or NULL	on failure.

	   Clean up and	finish with h, assumed to have been created with

	   Perform operation op	on the history list, with optional arguments
	   as needed by	the operation.	ev is changed accordingly to opera-
	   tion.  The following	values for op are supported, along with	the
	   required argument list:

	   H_SETSIZE, int size
		 Set size of history to	size elements.

		 Get number of events currently	in history.

		 Cleans	up and finishes	with h,	assumed	to be created with

		 Clear the history.

	   H_FUNC, void	*ptr, history_gfun_t first, history_gfun_t next,
		 history_gfun_t	last, history_gfun_t prev, history_gfun_t
		 curr, history_sfun_t set, history_vfun_t clear,
		 history_efun_t	enter, history_efun_t add
		 Define	functions to perform various history operations.  ptr
		 is the	argument given to a function when it's invoked.

		 Return	the first element in the history.

		 Return	the last element in the	history.

		 Return	the previous element in	the history.

		 Return	the next element in the	history.

		 Return	the current element in the history.

	   H_SET, int position
		 Set the cursor	to point to the	requested element.

	   H_ADD, const	char *str
		 Append	str to the current element of the history, or perform
		 the H_ENTER operation with argument str if there is no	cur-
		 rent element.

	   H_APPEND, const char	*str
		 Append	str to the last	new element of the history.

	   H_ENTER, const char *str
		 Add str as a new element to the history and, if necessary,
		 removing the oldest entry to keep the list to the created
		 size.	If H_SETUNIQUE has been	called with a non-zero argu-
		 ment, the element will	not be entered into the	history	if its
		 contents match	the ones of the	current	history	element.  If
		 the element is	entered	history() returns 1; if	it is ignored
		 as a duplicate	returns	0.  Finally history() returns -1 if an
		 error occurred.

	   H_PREV_STR, const char *str
		 Return	the closest previous event that	starts with str.

	   H_NEXT_STR, const char *str
		 Return	the closest next event that starts with	str.

	   H_PREV_EVENT, int e
		 Return	the previous event numbered e.

	   H_NEXT_EVENT, int e
		 Return	the next event numbered	e.

	   H_LOAD, const char *file
		 Load the history list stored in file.

	   H_SAVE, const char *file
		 Save the history list to file.

	   H_SAVE_FP, FILE *fp
		 Save the history list to the opened FILE pointer fp.

	   H_SETUNIQUE,	int unique
		 Set flag that adjacent	identical event	strings	should not be
		 entered into the history.

		 Retrieve the current setting if adjacent identical elements
		 should	be entered into	the history.

	   H_DEL, int e
		 Delete	the event numbered e.  This function is	only provided
		 for readline(3) compatibility.	 The caller is responsible for
		 free'ing the string in	the returned HistEvent.

	   history() returns >=	0 if the operation op succeeds.	 Otherwise, -1
	   is returned and ev is updated to contain more details about the er-

     The tokenization functions	use a common data structure, Tokenizer,	which
     is	created	by tok_init() and freed	by tok_end().

     The following functions are available:

	   Initialize the tokenizer, and return	a data structure to be used by
	   all other tokenizer functions.  IFS contains	the Input Field	Sepa-
	   rators, which defaults to <space>, <tab>, and <newline> if NULL.

	   Clean up and	finish with t, assumed to have been created with

	   Reset the tokenizer state.  Use after a line	has been successfully
	   tokenized by	tok_line() or tok_str()	and before a new line is to be

	   Tokenize li,	If successful, modify: argv to contain the words, argc
	   to contain the number of words, cursorc (if not NULL) to contain
	   the index of	the word containing the	cursor,	and cursoro (if	not
	   NULL) to contain the	offset within argv[cursorc] of the cursor.

	   Returns 0 if	successful, -1 for an internal error, 1	for an un-
	   matched single quote, 2 for an unmatched double quote, and 3	for a
	   backslash quoted <newline>.	A positive exit	code indicates that
	   another line	should be read and tokenization	attempted again.

	   A simpler form of tok_line(); str is	a NUL terminated string	to to-

     sh(1), signal(3), termcap(3), editrc(5), termcap(5)

     The editline library first	appeared in 4.4BSD.  CC_REDISPLAY appeared in
     NetBSD 1.3.  CC_REFRESH_BEEP, EL_EDITMODE and the readline	emulation ap-
     peared in NetBSD 1.4.  EL_RPROMPT appeared	in NetBSD 1.5.

     The editline library was written by Christos Zoulas.  Luke	Mewburn	wrote
     this manual and implemented CC_REDISPLAY, CC_REFRESH_BEEP,	EL_EDITMODE,
     and EL_RPROMPT.  Jaromir Dolecek implemented the readline emulation.
     Johny Mattsson implemented	wide-character support.

     At	this time, it is the responsibility of the caller to check the result
     of	the EL_EDITMODE	operation of el_get() (after an	el_source() or
     el_parse()) to determine if editline should be used for further input.
     I.e., EL_EDITMODE is purely an indication of the result of	the most re-
     cent editrc(5) edit command.

FreeBSD	13.0			April 28, 2017			  FreeBSD 13.0


Want to link to this manual page? Use this URL:

home | help