FreeBSD Manual Pages
HOSTAPD_CLI(8) FreeBSD System Manager's Manual HOSTAPD_CLI(8) NAME hostapd_cli -- text-based frontend program for interacting with hostapd(8) SYNOPSIS hostapd_cli [commands] DESCRIPTION The hostapd_cli utility is a text-based frontend program for interacting with hostapd(8). It is used to query the current status. The hostapd_cli utility can show the current authentication status, dot11 and dot1x MIBs, etc. The hostapd_cli utility supports two modes: interactive and command line. Both modes share the same command set. Interactive mode is started when hostapd_cli is executed without any pa- rameters on the command line. Commands are then entered from the con- trolling terminal in response to the hostapd_cli prompt. In command line mode, the same commands are entered as command line arguments. COMMANDS The following commands may be supplied on the command line or at a prompt when operating interactively. mib Report MIB variables (dot1x, dot11) for the current interface. sta addr Report the MIB variables for the associated station with MAC ad- dress addr. all_sta Report the MIB variables for all associated stations. help Show usage help. interface [ifname] Show available interfaces and/or set the current interface when multiple are available. level debug_level Change the debugging level in hostapd(8). Larger numbers gener- ate more messages. license Display the full license for hostapd_cli. quit Exit hostapd_cli. SEE ALSO hostapd.conf(5), hostapd(8) HISTORY The hostapd_cli utility first appeared in FreeBSD 6.0. AUTHORS The hostapd_cli utility was written by Jouni Malinen <j@w1.fi>. This manual page is derived from the README file included in the hostapd dis- tribution. FreeBSD 13.0 June 16, 2005 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | COMMANDS | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=hostapd_cli&sektion=8&manpath=FreeBSD+13.1-RELEASE+and+Ports>