FreeBSD Manual Pages
IOSTAT(8) FreeBSD System Manager's Manual IOSTAT(8) NAME iostat -- report I/O statistics SYNOPSIS iostat [-CdhIKoTxz?] [-c count] [-M core] [-n devs] [-N system] [-t type,if,pass] [-w wait] [drives] DESCRIPTION The iostat utility displays kernel I/O statistics on terminal, device and cpu operations. The first statistics that are printed are averaged over the system uptime. To get information about the current activity, a suitable wait time should be specified, so that the subsequent sets of printed statistics will be averaged over that time. The options are as follows: -c Repeat the display count times. If no repeat count is specified, the default depends on whether -w is specified. With -w the de- fault repeat count is infinity, otherwise it is 1. -C Display CPU statistics. This is on by default, unless -d or -x is specified. -d Display only device statistics. If this flag is turned on, only device statistics will be displayed, unless -C or -T is also speci- fied to enable the display of CPU or TTY statistics. -h Put iostat in `top' mode. In this mode, iostat will show devices in order from highest to lowest bytes per measurement cycle. -I Display total statistics for a given time period, rather than aver- age statistics for each second during that time period. -K In the blocks transferred display (-o), display block count in kilobytes rather then the device native block size. -M Extract values associated with the name list from the specified core instead of the default "/dev/kmem". -n Display up to devs number of devices. The iostat utility will dis- play fewer devices if there are not devs devices present. -N Extract the name list from the specified system instead of the de- fault "/boot/kernel/kernel". -o Display old-style iostat device statistics. Sectors per second, transfers per second, and milliseconds per seek are displayed. If -I is specified, total blocks/sectors, total transfers, and mil- liseconds per seek are displayed. -t Specify which types of devices to display. There are three differ- ent categories of devices: device type: da Direct Access devices sa Sequential Access devices printer Printers proc Processor devices worm Write Once Read Multiple devices cd CD devices scanner Scanner devices optical Optical Memory devices changer Medium Changer devices comm Communication devices array Storage Array devices enclosure Enclosure Services devices floppy Floppy devices interface: IDE Integrated Drive Electronics devices SCSI Small Computer System Interface devices other Any other device interface passthrough: pass Passthrough devices The user must specify at least one device type, and may specify at most one device type from each category. Multiple device types in a single device type statement must be separated by commas. Any number of -t arguments may be specified on the command line. All -t arguments are ORed together to form a matching expression against which all devices in the system are compared. Any device that fully matches any -t argument will be included in the iostat output, up to the number of devices that can be displayed in 80 columns, or the maximum number of devices specified by the user. -T Display TTY statistics. This is on by default, unless -d or -x is specified. -w Pause wait seconds between each display. If no wait interval is specified, the default is 1 second. The iostat command will accept and honor a non-integer number of seconds. Note that the interval only has millisecond granularity. Finer values will be truncated. E.g., "-w1.0001" is the same as "-w1.000". The interval will also suffer from modifications to kern.hz so your mileage may vary. -x Show extended disk statistics. Each disk is displayed on a line of its own with all available statistics. If this flag is turned on, only disk statistics will be displayed, unless -C or -T is also specified to enable the display of CPU or TTY statistics. -z If -x is specified, omit lines for devices with no activity. -? Display a usage statement and exit. The iostat utility displays its information in the following format: tty tin characters read from terminals tout characters written to terminals devices Device operations. The header of the field is the device name and unit number. The iostat utility will display as many devices as will fit in a standard 80 column screen, or the maximum number of devices in the system, whichever is smaller. If -n is specified on the command line, iostat will display the smaller of the requested number of devices, and the maximum number of devices in the system. To force iostat to display specific drives, their names may be sup- plied on the command line. The iostat utility will not display more devices than will fit in an 80 column screen, unless the -n argument is given on the command line to specify a maximum number of devices to display. If fewer devices are specified on the com- mand line than will fit in an 80 column screen, iostat will show only the specified devices. The standard iostat device display shows the following statistics: KB/t kilobytes per transfer tps transfers per second MB/s megabytes per second The standard iostat device display, with the -I flag specified, shows the following statistics: KB/t kilobytes per transfer xfrs total number of transfers MB total number of megabytes transferred The extended iostat device display, with the -x flag specified, shows the following statistics: r/s read operations per second w/s write operations per second kr/s kilobytes read per second kw/s kilobytes write per second qlen transactions queue length ms/r average duration of read transactions, in milliseconds ms/w average duration of write transactions, in milliseconds ms/o average duration of all other transactions, in milliseconds ms/t average duration of all transactions, in milliseconds %b % of time the device had one or more outstanding transac- tions The extended iostat device display, with the -x and -I flags speci- fied, shows the following statistics: r/i read operations per time period w/i write operations per time period kr/i kilobytes read per time period kw/i kilobytes write per time period qlen transactions queue length tsvc_t/i total duration of transactions per time period, in seconds sb/i total time the device had one or more outstanding transac- tions per time period, in seconds The old-style iostat display (using -o) shows the following statis- tics: sps sectors transferred per second tps transfers per second msps average milliseconds per transaction The old-style iostat display, with the -I flag specified, shows the following statistics: blk total blocks/sectors transferred xfr total transfers msps average milliseconds per transaction cpu us % of cpu time in user mode ni % of cpu time in user mode running niced processes sy % of cpu time in system mode in % of cpu time in interrupt mode id % of cpu time in idle mode FILES /boot/kernel/kernel Default kernel namelist. /dev/kmem Default memory file. EXAMPLES iostat -w 1 da0 da1 cd0 Display statistics for the first two Direct Access devices and the first CDROM device every second ad infinitum. iostat -c 2 Display the statistics for the first four devices in the system twice, with a one second display interval. iostat -t da -t cd -w 1 Display statistics for all CDROM and Direct Access devices every second ad infinitum. iostat -t da,scsi,pass -t cd,scsi,pass Display statistics once for all SCSI passthrough devices that provide ac- cess to either Direct Access or CDROM devices. iostat -h -n 8 -w 1 Display up to 8 devices with the most I/O every second ad infinitum. iostat -dh -t da -w 1 Omit the TTY and CPU displays, show devices in order of performance and show only Direct Access devices every second ad infinitum. iostat -Iw 3 Display total statistics every three seconds ad infinitum. iostat -odICTw 2 -c 9 Display total statistics using the old-style output format 9 times, with a two second interval between each measurement/display. The -d flag gen- erally disables the TTY and CPU displays, but since the -T and -C flags are given, the TTY and CPU displays will be displayed. SEE ALSO fstat(1), netstat(1), nfsstat(1), ps(1), systat(1), devstat(3), ctlstat(8), gstat(8), pstat(8), vmstat(8) The sections starting with ``Interpreting system activity'' in Installing and Operating 4.3BSD. HISTORY This version of iostat first appeared in FreeBSD 3.0. AUTHORS Kenneth Merry <ken@FreeBSD.org> BUGS The use of iostat as a debugging tool for crash dumps is probably limited because there is currently no way to get statistics that only cover the time immediately before the crash. FreeBSD 13.0 May 22, 2015 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | FILES | EXAMPLES | SEE ALSO | HISTORY | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=iostat&sektion=8&manpath=FreeBSD+13.2-RELEASE+and+Ports>