FreeBSD Manual Pages
LOGROTATE(8) System Administrator's Manual LOGROTATE(8) NAME logrotate - rotates, compresses, and mails system logs SYNOPSIS logrotate [--debug] [--verbose] [--log file] [--force] [--state file] [--mail command] config_file [config_file2 ...] DESCRIPTION logrotate is designed to ease administration of systems that generate large numbers of log files. It allows automatic rotation, compression, removal, and mailing of log files. Each log file may be handled daily, weekly, monthly, or when it grows too large. Normally, logrotate is run as a daily cron job. It will not modify a log more than once in one day unless the criterion for that log is based on the log's size and logrotate is being run more than once each day, or unless the -f or --force option is used. Any number of config files may be given on the command line. Later con- fig files may override the options given in earlier files, so the order in which the logrotate config files are listed is important. Normally, a single config file which includes any other config files which are needed should be used. See below for more information on how to use the include directive to accomplish this. If a directory is given on the command line, every file in that directory is used as a config file. If no command line arguments are given, logrotate will print version and copyright information, along with a short usage summary. If any errors occur while rotating logs, logrotate will exit with non-zero status. OPTIONS -?, --help Prints help message. -d, --debug Turns on debug mode and implies -v. In debug mode, no changes will be made to the logs or to the logrotate state file. -f, --force Tells logrotate to force the rotation, even if it doesn't think this is necessary. Sometimes this is useful after adding new entries to a logrotate config file, or if old log files have been removed by hand, as the new files will be created, and log- ging will continue correctly. -l, --log file Tells logrotate to log verbose output into the log_file. The verbose output logged to that file is the same as when running logrotate with -v switch. The log file is overwritten on every logrotate execution. -m, --mail command Tells logrotate which command to use when mailing logs. This command should accept the following arguments: 1) the subject of the message given with '-s subject' 2) the recipient. The command must then read a message on standard input and mail it to the recipient. The default mail command is /usr/bin/mailx. -s, --state statefile Tells logrotate to use an alternate state file. This is useful if logrotate is being run as a different user for various sets of log files. The default state file is /var/run/logrotate.sta- tus. --usage Prints a short usage message. -v, --verbose Turns on verbose mode, for example to display messages during rotation. CONFIGURATION FILE logrotate reads everything about the log files it should be handling from the series of configuration files specified on the command line. Each configuration file can set global options (local definitions over- ride global ones, and later definitions override earlier ones) and specify logfiles to rotate. A simple configuration file looks like this: # sample logrotate configuration file compress /var/log/messages { rotate 5 weekly postrotate /usr/bin/killall -HUP syslogd endscript } "/var/log/httpd/access.log" /var/log/httpd/error.log { rotate 5 mail recipient@example.org size 100k sharedscripts postrotate /usr/bin/killall -HUP httpd endscript } /var/log/news/* { monthly rotate 2 olddir /var/log/news/old missingok postrotate kill -HUP $(cat /var/run/inn.pid) endscript nocompress } ~/log/*.log {} The first few lines set global options; in the example, logs are com- pressed after they are rotated. Note that comments may appear anywhere in the config file as long as the first non-whitespace character on the line is a #. Values are separated from directives by whitespace and/or an optional =. Numbers must be specified in a format understood by strtoul(3). The next section of the config file defines how to handle the log file /var/log/messages. The log will go through five weekly rotations before being removed. After the log file has been rotated (but before the old version of the log has been compressed), the command /usr/bin/killall -HUP syslogd will be executed. The next section defines the parameters for both /var/log/httpd/ac- cess.log and /var/log/httpd/error.log. Each is rotated whenever it grows over 100k in size, and the old logs files are mailed (uncom- pressed) to recipient@example.org after going through 5 rotations, rather than being removed. The sharedscripts means that the postrotate script will only be run once (after the old logs have been compressed), not once for each log which is rotated. Note that log file names may be enclosed in quotes (and that quotes are required if the name con- tains spaces). Normal shell quoting rules apply, with ', ", and \ characters supported. The next section defines the parameters for all of the files in /var/log/news. Each file is rotated on a monthly basis. This is con- sidered a single rotation directive and if errors occur for more than one file, the log files are not compressed. The last section uses tilde expansion to rotate log files in the home directory of the current user. This is only available, if your glob li- brary supports tilde expansion. GNU glob does support this. Please use wildcards with caution. If you specify *, logrotate will rotate all files, including previously rotated ones. A way around this is to use the olddir directive or a more exact wildcard (such as *.log). Here is more information on the directives which may be included in a logrotate configuration file: DIRECTIVES These directives may be included in a logrotate configuration file: compress Old versions of log files are compressed with gzip(1) by de- fault. See also nocompress. compresscmd Specifies which command to use to compress log files. The de- fault is gzip(1). See also compress. uncompresscmd Specifies which command to use to uncompress log files. The de- fault is gunzip(1). compressext Specifies which extension to use on compressed logfiles, if com- pression is enabled. The default follows that of the configured compression command. compressoptions Command line options may be passed to the compression program, if one is in use. The default, for gzip(1), is "-6" (biased to- wards high compression at the expense of speed). If you use a different compression command, you may need to change the com- pressoptions to match. copy Make a copy of the log file, but don't change the original at all. This option can be used, for instance, to make a snapshot of the current log file, or when some other utility needs to truncate or parse the file. When this option is used, the cre- ate option will have no effect, as the old log file stays in place. copytruncate Truncate the original log file to zero size in place after cre- ating a copy, instead of moving the old log file and optionally creating a new one. It can be used when some program cannot be told to close its logfile and thus might continue writing (ap- pending) to the previous log file forever. Note that there is a very small time slice between copying the file and truncating it, so some logging data might be lost. When this option is used, the create option will have no effect, as the old log file stays in place. create mode owner group, create owner group Immediately after rotation (before the postrotate script is run) the log file is created (with the same name as the log file just rotated). mode specifies the mode for the log file in octal (the same as chmod(2)), owner specifies the user name who will own the log file, and group specifies the group the log file will belong to. Any of the log file attributes may be omitted, in which case those attributes for the new file will use the same values as the original log file for the omitted attributes. This option can be disabled using the nocreate option. createolddir mode owner group If the directory specified by olddir directive does not exist, it is created. mode specifies the mode for the olddir directory in octal (the same as chmod(2)), owner specifies the user name who will own the olddir directory, and group specifies the group the olddir directory will belong to. This option can be disabled using the nocreateolddir option. daily Log files are rotated every day. dateext Archive old versions of log files adding a date extension like YYYYMMDD instead of simply adding a number. The extension may be configured using the dateformat and dateyesterday options. dateformat format_string Specify the extension for dateext using the notation similar to strftime(3) function. Only %Y %m %d %H %M %S %V and %s speci- fiers are allowed. The default value is -%Y%m%d except hourly, which uses -%Y%m%d%H as default value. Note that also the char- acter separating log name from the extension is part of the dateformat string. The system clock must be set past Sep 9th 2001 for %s to work correctly. Note that the datestamps gener- ated by this format must be lexically sortable (that is first the year, then the month then the day. For example 2001/12/01 is ok, but 01/12/2001 is not, since 01/11/2002 would sort lower while it is later). This is because when using the rotate op- tion, logrotate sorts all rotated filenames to find out which logfiles are older and should be removed. dateyesterday Use yesterday's instead of today's date to create the dateext extension, so that the rotated log file has a date in its name that is the same as the timestamps within it. delaycompress Postpone compression of the previous log file to the next rota- tion cycle. This only has effect when used in combination with compress. It can be used when some program cannot be told to close its logfile and thus might continue writing to the previ- ous log file for some time. extension ext Log files with ext extension can keep it after the rotation. If compression is used, the compression extension (normally .gz) appears after ext. For example you have a logfile named my- log.foo and want to rotate it to mylog.1.foo.gz instead of my- log.foo.1.gz. hourly Log files are rotated every hour. Note that usually logrotate is configured to be run by cron daily. You have to change this con- figuration and run logrotate hourly to be able to really rotate logs hourly. addextension ext Log files are given the final extension ext after rotation. If the original file already ends with ext, the extension is not duplicated, but merely moved to the end, that is both filename and filenameext would get rotated to filename.1ext. If compres- sion is used, the compression extension (normally .gz) appears after ext. ifempty Rotate the log file even if it is empty, overriding the no- tifempty option (ifempty is the default). include file_or_directory Reads the file given as an argument as if it was included inline where the include directive appears. If a directory is given, most of the files in that directory are read in alphabetic order before processing of the including file continues. The only files which are ignored are files which are not regular files (such as directories and named pipes) and files whose names end with one of the taboo extensions or patterns, as specified by the tabooext or taboopat directives, respectively. mail address When a log is rotated out of existence, it is mailed to address. If no mail should be generated by a particular log, the nomail directive may be used. mailfirst When using the mail command, mail the just-rotated file, instead of the about-to-expire file. maillast When using the mail command, mail the about-to-expire file, in- stead of the just-rotated file (this is the default). minage count Do not rotate logs which are less than <count> days old. maxage count Remove rotated logs older than <count> days. The age is only checked if the logfile is to be rotated. The files are mailed to the configured address if maillast and mail are configured. maxsize size Log files are rotated when they grow bigger than size bytes even before the additionally specified time interval (daily, weekly, monthly, or yearly). The related size option is similar except that it is mutually exclusive with the time interval options, and it causes log files to be rotated without regard for the last rotation time. When maxsize is used, both the size and timestamp of a log file are considered. minsize size Log files are rotated when they grow bigger than size bytes, but not before the additionally specified time interval (daily, weekly, monthly, or yearly). The related size option is similar except that it is mutually exclusive with the time interval op- tions, and it causes log files to be rotated without regard for the last rotation time. When minsize is used, both the size and timestamp of a log file are considered. missingok If the log file is missing, go on to the next one without issu- ing an error message. See also nomissingok. monthly Log files are rotated the first time logrotate is run in a month (this is normally on the first day of the month). nocompress Old versions of log files are not compressed. See also compress. nocopy Do not copy the original log file and leave it in place. (this overrides the copy option). nocopytruncate Do not truncate the original log file in place after creating a copy (this overrides the copytruncate option). nocreate New log files are not created (this overrides the create op- tion). nocreateolddir olddir directory is not created by logrotate when it does not exist. nodelaycompress Do not postpone compression of the previous log file to the next rotation cycle (this overrides the delaycompress option). nodateext Do not archive old versions of log files with date extension (this overrides the dateext option). nomail Do not mail old log files to any address. nomissingok If a log file does not exist, issue an error. This is the de- fault. noolddir Logs are rotated in the directory they normally reside in (this overrides the olddir option). nosharedscripts Run prerotate and postrotate scripts for every log file which is rotated (this is the default, and overrides the sharedscripts option). The absolute path to the log file is passed as first argument to the script. If the scripts exit with error, the re- maining actions will not be executed for the affected log only. noshred Do not use shred when deleting old log files. See also shred. notifempty Do not rotate the log if it is empty (this overrides the ifempty option). olddir directory Logs are moved into directory for rotation. The directory must be on the same physical device as the log file being rotated, unless copy, copytruncate or renamecopy option is used. The di- rectory is assumed to be relative to the directory holding the log file unless an absolute path name is specified. When this option is used all old versions of the log end up in directory. This option may be overridden by the noolddir option. postrotate/endscript The lines between postrotate and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) af- ter the log file is rotated. These directives may only appear inside a log file definition. Normally, the absolute path to the log file is passed as first argument to the script. If shared- scripts is specified, whole pattern is passed to the script. See also prerotate. See sharedscripts and nosharedscripts for error handling. prerotate/endscript The lines between prerotate and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) be- fore the log file is rotated and only if the log will actually be rotated. These directives may only appear inside a log file definition. Normally, the absolute path to the log file is passed as first argument to the script. If sharedscripts is specified, whole pattern is passed to the script. See also postrotate. See sharedscripts and nosharedscripts for error handling. firstaction/endscript The lines between firstaction and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) once before all log files that match the wildcarded pattern are ro- tated, before prerotate script is run and only if at least one log will actually be rotated. These directives may only appear inside a log file definition. Whole pattern is passed to the script as first argument. If the script exits with error, no further processing is done. See also lastaction. lastaction/endscript The lines between lastaction and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) once after all log files that match the wildcarded pattern are ro- tated, after postrotate script is run and only if at least one log is rotated. These directives may only appear inside a log file definition. Whole pattern is passed to the script as first argument. If the script exits with error, just an error message is shown (as this is the last action). See also firstaction. preremove/endscript The lines between preremove and endscript (both of which must appear on lines by themselves) are executed (using /bin/sh) once just before removal of a log file. The logrotate will pass the name of file which is soon to be removed. See also firstaction. rotate count Log files are rotated count times before being removed or mailed to the address specified in a mail directive. If count is 0, old versions are removed rather than rotated. Default is 0. renamecopy Log file is renamed to temporary filename in the same directory by adding ".tmp" extension to it. After that, postrotate script is run and log file is copied from temporary filename to final filename. This allows storing rotated log files on the different devices using olddir directive. In the end, temporary filename is removed. size size Log files are rotated only if they grow bigger than size bytes. If size is followed by k, the size is assumed to be in kilo- bytes. If the M is used, the size is in megabytes, and if G is used, the size is in gigabytes. So size 100, size 100k, size 100M and size 100G are all valid. sharedscripts Normally, prerotate and postrotate scripts are run for each log which is rotated and the absolute path to the log file is passed as first argument to the script. That means a single script may be run multiple times for log file entries which match multiple files (such as the /var/log/news/* example). If sharedscripts is specified, the scripts are only run once, no matter how many logs match the wildcarded pattern, and whole pattern is passed to them. However, if none of the logs in the pattern require rotating, the scripts will not be run at all. If the scripts exit with error, the remaining actions will not be executed for any logs. This option overrides the nosharedscripts option and implies create option. shred Delete log files using shred -u instead of unlink(). This should ensure that logs are not readable after their scheduled deletion; this is off by default. See also noshred. shredcycles count Asks GNU shred(1) to overwrite log files count times before deletion. Without this option, shred's default will be used. start count This is the number to use as the base for rotation. For example, if you specify 0, the logs will be created with a .0 extension as they are rotated from the original log files. If you specify 9, log files will be created with a .9, skipping 0-8. Files will still be rotated the number of times specified with the ro- tate directive. su user group Rotate log files set under this user and group instead of using default user/group (usually root). user specifies the user name used for rotation and group specifies the group used for rota- tion. If the user/group you specify here does not have suffi- cient privilege to make files with the ownership you've speci- fied in a create instruction, it will cause an error. tabooext [+] list The current taboo extension list is changed (see the include di- rective for information on the taboo extensions). If a + pre- cedes the list of extensions, the current taboo extension list is augmented, otherwise it is replaced. At startup, the taboo extension list ,v, .cfsaved, .disabled, .dpkg-bak, .dpkg-del, .dpkg-dist, .dpkg-new, .dpkg-old, .rhn-cfg-tmp-*, .rpmnew, .rp- morig, .rpmsave, .swp, .ucf-dist, .ucf-new, .ucf-old, ~ taboopat [+] list The current taboo glob pattern list is changed (see the include directive for information on the taboo extensions and patterns). If a + precedes the list of patterns, the current taboo pattern list is augmented, otherwise it is replaced. At startup, the taboo pattern list is empty. weekly [weekday] Log files are rotated once each weekday, or if the date is ad- vanced by at least 7 days since the last rotation (while ignor- ing the exact time). The weekday interpretation is following: 0 means Sunday, 1 means Monday, ..., 6 means Saturday; the spe- cial value 7 means each 7 days, irrespectively of weekday. De- faults to 0 if the weekday argument is omitted. yearly Log files are rotated if the current year is not the same as the last rotation. FILES /var/run/logrotate.status Default state file. /etc/logrotate.conf Configuration options. SEE ALSO chmod(2), gunzip(1), gzip(1), mail(1), shred(1), strftime(3), str- toul(3), <https://github.com/logrotate/logrotate> AUTHORS Erik Troan, Preston Brown, Jan Kaluza. <https://github.com/logrotate/logrotate> Linux 3.13.0 LOGROTATE(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION FILE | FILES | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=logrotate&manpath=FreeBSD+13.2-RELEASE+and+Ports>