FreeBSD Manual Pages
MFI(4) BSD Kernel Interfaces Manual MFI(4) NAME mfi -- LSI MegaRAID SAS driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device pci device mfi Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): mfi_load="YES" DESCRIPTION This driver is for LSI's next generation PCI Express SAS RAID con- trollers. Access to RAID arrays (logical disks) from this driver is pro- vided via /dev/mfid? device nodes. A simple management interface is also provided on a per-controller basis via the /dev/mfi? device node. The mfi name is derived from the phrase "MegaRAID Firmware Interface", which is substantially different than the old "MegaRAID" interface and thus requires a new driver. Older SCSI and SATA MegaRAID cards are sup- ported by amr(4) and will not work with this driver. Two sysctls are provided to tune the mfi driver's behavior when a request is made to remove a mounted volume. By default the driver will disallow any requests to remove a mounted volume. If the sysctl dev.mfi.%d.delete_busy_volumes is set to 1, then the driver will allow mounted volumes to be removed. HARDWARE The mfi driver supports the following hardware: o LSI MegaRAID SAS 8408E o LSI MegaRAID SAS 8480E o Dell PERC5/i FILES /dev/mfid? array/logical disk interface /dev/mfi? management interface DIAGNOSTICS mfid%d: Unable to delete busy device An attempt was made to remove a mounted volume. SEE ALSO amr(4), pci(4) HISTORY The mfi driver first appeared in FreeBSD 6.1. AUTHORS The mfi driver and this manual page were written by Scott Long <scottl@FreeBSD.org>. BUGS The driver does not support big-endian architectures at this time. BSD April 3, 2006 BSD
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | FILES | DIAGNOSTICS | SEE ALSO | HISTORY | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mfi&sektion=4&manpath=FreeBSD+6.3-RELEASE>