FreeBSD Manual Pages
MLX4EN(4) BSD Kernel Interfaces Manual MLX4EN(4) NAME mlx4en -- Mellanox ConnectX-3 10GbE/40GbE network adapter driver SYNOPSIS To compile this driver into the kernel, place these lines in your kernel configuration file: options COMPAT_LINUXKPI device mlx4 device mlx4en To load the driver as a module at run-time, run this command as root: kldload mlx4en To load the driver as a module at boot time, place this line in loader.conf(5): mlx4en_load="YES" DESCRIPTION Mellanox ConnectX adapter cards with Virtual Protocol Interconnect (VPI) provide the highest performing and most flexible interconnect solution for Enterprise Data Centers, High-Performance Computing, and Embedded en- vironments. Clustered data bases, parallelized applications, transac- tional services and high-performance embedded I/O applications will achieve significant performance improvements resulting in reduced comple- tion time and lower cost per operation. HARDWARE The mlx4en driver supports the following network adapters: o Mellanox ConnectX-2 (ETH) o Mellanox ConnectX-3 (ETH) SUPPORT For general information and support, go to the Mellanox support website at: http://www.mellanox.com/ If an issue is identified with this driver and a supported network adapter, please email the specific information to <freebsd-drivers@mellanox.com>. SEE ALSO mlx4ib(4), ifconfig(8) HISTORY The mlx4en device driver first appeared in FreeBSD 9.x. AUTHORS The mlx4en driver was written by Mellanox Technologies <freebsd-drivers@mellanox.com>. BSD March 1, 2017 BSD
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SUPPORT | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mlx4en&sektion=4&manpath=FreeBSD+11.2-RELEASE>