FreeBSD Manual Pages
NG_LMI(4) BSD Kernel Interfaces Manual NG_LMI(4) NAME ng_lmi -- frame relay LMI protocol netgraph node type SYNOPSIS #include <netgraph/ng_lmi.h> DESCRIPTION The lmi node type performs the frame relay LMI protocol. It supports the ITU Annex A, ANSI Annex D, and Group-of-four LMI types. It also supports auto-detection of the LMI type. To enable a specific LMI type, connect the corresponding hook (annexA, annexD, or group4) to DLCI 0 or 1023 of a ng_frame_relay(4) node. Typi- cally, Annex A and Annex D live on DLCI 0 while Group-of-four lives on DLCI 1023. To enable LMI type auto-detection, connect the auto0 hook to DLCI 0 and the auto1023 hook to DLCI 1023. The node will attempt to automatically determine which LMI type is running at the switch, and go into that mode. Only one fixed LMI type, or auto-detection, can be active at any given time. The NGM_LMI_GET_STATUS control message can be used at any time to query the current status of the LMI protocol and each DLCI channel. This node also supports the NGM_TEXT_STATUS control message. HOOKS This node type supports the following hooks: annexA ITU Annex A LMI hook. annexD ANSI Annex D LMI hook. group4 Group-of-four LMI hook. auto0 Auto-detection hook for DLCI 0. auto1023 Auto-detection hook for DLCI 1023. CONTROL MESSAGES This node type supports the generic control messages, plus the following: NGM_LMI_GET_STATUS This command returns status information in a struct nglmistat: #define NGM_LMI_STAT_ARYSIZE (1024/8) struct nglmistat { u_char proto[12]; /* Active proto (same as hook name) */ u_char hook[12]; /* Active hook */ u_char fixed; /* If set to fixed LMI mode */ u_char autod; /* If currently auto-detecting */ u_char seen[NGM_LMI_STAT_ARYSIZE]; /* bitmap DLCIs seen */ u_char up[NGM_LMI_STAT_ARYSIZE]; /* bitmap DLCIs up */ }; NGM_TEXT_STATUS This generic message returns is a human-readable version of the node status. SHUTDOWN This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have been disconnected. SEE ALSO netgraph(4), ng_frame_relay(4), ngctl(8) ANSI T1.617-1991 Annex D. ITU-T Q.933 Digital Subscriber Signaling System No. 1 - Signaling Specification for Frame Mode Basic Call Control, Annex A. HISTORY The ng_lmi node type was implemented in FreeBSD 4.0. AUTHORS Julian Elischer <julian@FreeBSD.org> BSD January 19, 1999 BSD
NAME | SYNOPSIS | DESCRIPTION | HOOKS | CONTROL MESSAGES | SHUTDOWN | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ng_lmi&sektion=4&manpath=FreeBSD+5.1-RELEASE>