FreeBSD Manual Pages
NG_TAG(4) Kernel Interfaces Manual NG_TAG(4) NAME ng_tag -- mbuf tags manipulating netgraph node type SYNOPSIS #include <netgraph/ng_tag.h> DESCRIPTION The tag node type allows mbuf packet tags (see mbuf_tags(9)) to be exam- ined, stripped or applied to data travelling through a Netgraph network. Mbuf tags are used in many parts of the FreeBSD kernel network subsystem, including the storage of VLAN tags as described in vlan(4), Mandatory Ac- cess Control (MAC) labels as described in mac(9), IPsec policy information as described in ipsec(4), and packet filter tags used by pf(4). One should also consider useful setting or checking ipfw(8) tags, which are imple- mented as mbuf tags, too. Each node allows an arbitrary number of connections to arbitrarily named hooks. With each hook is associated a tag which will be searched in the list of all tags attached to a packet incoming to this hook, a destination hook for matching packets, a destination hook for non-matching packets, a tag which will be appended to data leaving node through this hook, and var- ious statistics counters. The list of incoming packet's tags is traversed to find a tag with speci- fied type and cookie values. Upon match, if specified tag_len is non-zero, tag_data of tag is checked to be identical to that specified in the hook structure. Packets with matched tags are forwarded to "match" destination hook, or forwarded to "non-match" hook otherwise. Either or both destina- tion hooks can be an empty string, or may not exist, in which case the packet is dropped. Tag list of packets leaving the node is extended with a new tag specified in outgoing hook structure (it is possible to avoid appending a new tag to pass packet completely unchanged by specifying zero type and cookie values in the structure of the corresponding outgoing hook). Additionally, a tag can be stripped from incoming packet after match if strip flag is set. This can be used for simple tag removal or tag replacement, if combined with tag addition on outgoing matching hook. Note that new tag is appended unconditionally, without checking if such a tag is already present in the list (it is up to user to check if this is a concern). New hooks are initially configured to drop all incoming packets (as all hook names are empty strings; zero values can be specified to forward all packets to non-matching hook), and to forward all outgoing packets without any tag appending. Data payload of packets passing through the node is completely unchanged, all operations can affect tag list only. HOOKS This node type supports any number of hooks having arbitrary names. In or- der to allow internal optimizations, user should never try to configure a hook with a structure pointing to hooks which do not exist yet. The safe way is to create all hooks first, then begin to configure them. CONTROL MESSAGES This node type supports the generic control messages, plus the following: NGM_TAG_SET_HOOKIN (sethookin) This command sets tag values which will be searched in the tag list of incoming packets on a hook. The following structure must be supplied as an argument: struct ng_tag_hookin { char thisHook[NG_HOOKSIZ]; /* name of hook */ char ifMatch[NG_HOOKSIZ]; /* match dest hook */ char ifNotMatch[NG_HOOKSIZ]; /* !match dest hook */ uint8_t strip; /* strip tag if found */ uint32_t tag_cookie; /* ABI/Module ID */ uint16_t tag_id; /* tag ID */ uint16_t tag_len; /* length of data */ uint8_t tag_data[0]; /* tag data */ }; The hook to be updated is specified in thisHook. Data bytes of tag corresponding to specified tag_id (type) and tag_cookie are placed in the tag_data array; there must be tag_len of them. Matching and non- matching incoming packets are delivered out the hooks named ifMatch and ifNotMatch, respectively. If strip flag is non-zero, then found tag is deleted from list of packet tags. NGM_TAG_GET_HOOKIN (gethookin) This command takes an ASCII string argument, the hook name, and re- turns the corresponding struct ng_tag_hookin as shown above. NGM_TAG_SET_HOOKOUT (sethookout) This command sets tags values which will be applied to outgoing pack- ets. The following structure must be supplied as an argument: struct ng_tag_hookout { char thisHook[NG_HOOKSIZ]; /* name of hook */ uint32_t tag_cookie; /* ABI/Module ID */ uint16_t tag_id; /* tag ID */ uint16_t tag_len; /* length of data */ uint8_t tag_data[0]; /* tag data */ }; The hook to be updated is specified in thisHook. Other variables mean basically the same as in struct ng_tag_hookin shown above, except used for setting values in a new tag. NGM_TAG_GET_HOOKOUT (gethookout) This command takes an ASCII string argument, the hook name, and re- turns the corresponding struct ng_tag_hookout as shown above. NGM_TAG_GET_STATS (getstats) This command takes an ASCII string argument, the hook name, and re- turns the statistics associated with the hook as a struct ng_tag_hook- stat. NGM_TAG_CLR_STATS (clrstats) This command takes an ASCII string argument, the hook name, and clears the statistics associated with the hook. NGM_TAG_GETCLR_STATS (getclrstats) This command is identical to NGM_TAG_GET_STATS, except that the sta- tistics are also atomically cleared. Note: statistics counters as well as three statistics messages above work only if code was compiled with the NG_TAG_DEBUG option. The reason for this is that statistics is rarely used in practice, but still consumes CPU cycles for every packet. Moreover, it is even not accurate on SMP systems due to lack of synchronization between threads, as this is very expensive. SHUTDOWN This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have been disconnected. EXAMPLES It is possible to do a simple L7 filtering by using ipfw(8) tags in con- junction with ng_bpf(4) traffic analyzer. Example below explains how to filter DirectConnect P2P network data traffic, which cannot be done by usual means as it uses random ports. It is known that such data connection always contains a TCP packet with 6-byte payload string "$Send|". So ipfw's netgraph action will be used to divert all TCP packets to an ng_bpf(4) node which will check for the specified string and return non- matching packets to ipfw(8). Matching packets are passed to ng_tag node, which will set a tag and pass them back to ng_bpf(4) node on a hook pro- grammed to accept all packets and pass them back to ipfw(8). A script pro- vided in ng_bpf(4) manual page will be used for programming node. Note that packets diverted from ipfw(8) to Netgraph have no link-level header, so offsets in tcpdump(1) expressions must be altered accordingly. Thus, there will be expression "ether[40:2]=0x244c && ether[42:4]=0x6f636b20" on incoming hook and empty expression to match all packets from ng_tag. So, this is ngctl(8) script for nodes creating and naming for easier ac- cess: /usr/sbin/ngctl -f- <<-SEQ mkpeer ipfw: bpf 41 ipfw name ipfw:41 dcbpf mkpeer dcbpf: tag matched th1 name dcbpf:matched ngdc SEQ Now "ngdc" node (which is of type ng_tag) must be programmed to echo all packets received on the "th1" hook back, with the ipfw(8) tag 412 attached. MTAG_IPFW value for tag_cookie was taken from file <netinet/ip_fw.h> and value for tag_id is tag number (412), with zero tag length: ngctl msg ngdc: sethookin { thisHook=\"th1\" ifNotMatch=\"th1\" } ngctl msg ngdc: sethookout { thisHook=\"th1\" \ tag_cookie=1148380143 \ tag_id=412 } Do not forget to program ng_bpf(4) "ipfw" hook with the above expression (see ng_bpf(4) for script doing this) and "matched" hook with an empty ex- pression: ngctl msg dcbpf: setprogram { thisHook=\"matched\" ifMatch=\"ipfw\" \ bpf_prog_len=1 bpf_prog=[ { code=6 k=8192 } ] } After finishing with netgraph(4) nodes, ipfw(8) rules must be added to en- able packet flow: ipfw add 100 netgraph 41 tcp from any to any iplen 46 ipfw add 110 reset tcp from any to any tagged 412 Note: one should ensure that packets are returned to ipfw after processing inside netgraph(4), by setting appropriate sysctl(8) variable: sysctl net.inet.ip.fw.one_pass=0 SEE ALSO netgraph(4), ng_bpf(4), ng_ipfw(4), ipfw(8), ngctl(8), mbuf_tags(9) HISTORY The ng_tag node type was implemented in FreeBSD 6.2. AUTHORS Vadim Goncharov <vadimnuclight@tpu.ru> BUGS For manipulating any tags with data payload (that is, all tags with non- zero tag_len) one should care about non-portable machine-dependent repre- sentation of tags on the low level as byte stream. Perhaps this should be done by another program rather than manually. FreeBSD ports 15.quarterly June 10, 2006 NG_TAG(4)
NAME | SYNOPSIS | DESCRIPTION | HOOKS | CONTROL MESSAGES | SHUTDOWN | EXAMPLES | SEE ALSO | HISTORY | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ng_tag&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>