FreeBSD Manual Pages
NXGE(4) BSD Kernel Interfaces Manual NXGE(4) NAME nxge -- Neterion Xframe 10GbE Server/Storage adapter driver SYNOPSIS To compile this driver into the kernel, place the following line in your kernel configuration file: device nxge Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_nxge_load="YES" DESCRIPTION The nxge driver provides support for Neterion Xframe-I and Xframe-II adapters. The driver supports TCP Segmentation Offload (TSO/LSO), Large Receive Offlaod (LRO), Jumbo Frames (5 buffer mode), Header Separation (Rx 2 buffer mode), VLAN, and Promiscuous mode. For general information and support, please visit the Neterion support page http://www.neterion.com/support/support.html. Support for Jumbo Frames is provided via the interface MTU setting. Se- lecting an MTU larger than 1500 bytes with the ifconfig(8) utility con- figures the adapter to transmit and receive Jumbo Frames. Xframe adapters support Jumbo Frames up to 9600 bytes. For Jumbo Frames, the driver will try to allocate physically contiguous buffers. Failures to do so may degrade the performance. To resolve such problems, please visit http://www.neterion.com where additional informa- tion and a kernel patch can be found. For more information on configuring this device, see ifconfig(8). HARDWARE The nxge driver supports Neterion Xframe 10 Gigabit Ethernet adapters listed in http://www.neterion.com/how/pricing.html. SUPPORT For troubleshooting tips and FAQs, please visit http://trac.neterion.com/cgi-bin/trac.cgi/wiki/TitleIndex?anonymous. For any issues please send an email to <support@neterion.com>. SEE ALSO arp(4), netintro(4), ifconfig(8) HISTORY The nxge device driver first appeared in FreeBSD 7.0. AUTHORS The nxge driver was written by Neterion <support@neterion.com>. BSD October 16, 2007 BSD
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SUPPORT | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=nxge&sektion=4&manpath=FreeBSD+8.1-RELEASE>