FreeBSD Manual Pages
PST(4) FreeBSD Kernel Interfaces Manual PST(4) NAME pst -- device driver for Promise Supertrak SX6000 SYNOPSIS To compile this driver into the kernel, place the following line in your kernel configuration file: device pst Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): pst_load="YES" DESCRIPTION This driver is for the Promise Supertrak SX6000 ATA hardware RAID con- troller. It supports (in hardware) RAID levels 0, 1, 0+1, 3, 5 and JBOD on up to 6 ATA disk drives, including automatic rebuild and hotswap, and supports signalling disk status on LEDs on Promise Superswap disk enclo- sures. The Supertrak line of controllers does not support non-disk de- vices. HARDWARE The pst driver supports the Promise Supertrak SX6000 ATA hardware RAID controller. NOTES The pst driver does not support manipulating the RAID from the OS, RAIDs need to be set up from the onboard BIOS. However, hot swap, hot spare, and automatic rebuilds are supported without a reboot. HISTORY The pst driver first appeared in FreeBSD 4.7. AUTHORS The pst driver and man page was written by Soren Schmidt <sos@FreeBSD.org>. FreeBSD 13.0 December 14, 2004 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | NOTES | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=pst&sektion=4&manpath=FreeBSD+13.2-RELEASE+and+Ports>