FreeBSD Manual Pages
QLNXE(4) FreeBSD Kernel Interfaces Manual QLNXE(4) NAME qlnxe -- Cavium 25/40/100 Gigabit Ethernet & CNA Adapter Driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device qlnxe To load the driver as a module at boot time, place the following line in loader.conf(5): if_qlnxe_load="YES" DESCRIPTION The qlnxe driver supports IPv4 checksum offload, TCP and UDP checksum offload for both IPv4 and IPv6, Large Segment Offload for both IPv4 and IPv6, Jumbo frames, VLAN Tag, Receive Side scaling, HW and Soft LRO. For further hardware information, see http://www.qlogic.com/. HARDWARE The qlnxe driver supports 25/40/100 Gigabit Ethernet & CNA Adapter based on the following chipsets: o QLogic 45000 series o QLogic 41000 series SUPPORT For support questions please contact your Cavium approved reseller or Cavium Technical Support at http://support.qlogic.com, or by E-mail at <support@qlogic.com>. SEE ALSO altq(4), arp(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY The qlnxe device driver first appeared in FreeBSD 11.1. AUTHORS The qlnxe driver was written by David C Somayajulu at Cavium Inc. FreeBSD 13.0 May 9, 2017 FreeBSD 13.0
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SUPPORT | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=qlnxe&sektion=4&manpath=FreeBSD+13.1-RELEASE+and+Ports>